Hallo, ich möchte meinen squid mit squidclamav erweitern und habe hierzu die Anweisungen aus der README.SuSE zum squidclamav ausgeführt und die entsprechenden config-Dateien von c-icap und squidclamav ergänzt / geändert. Nach der in der readme angegebenen Ergänzung von squid.conf gibt es im firefox keine Verbindung mehr zu urls. Wenn ich die nachstehenden Zeilen auskommentiere funktioniert das browsen wieder: cap_service service_req reqmod_precache bypass=1 icap://127.0.0.1:1344/squidclamav adaptation_access service_req deny CONNECT adaptation_access service_req allow all icap_service service_resp respmod_precache bypass=0 icap://127.0.0.1:1344/squidclamav adaptation_access service_resp deny CONNECT adaptation_access service_resp allow all Die jeweils erden beiden Zeilen sind in der originalen squid.conf in einer Zeile. System: OS 12.1 Squid: 3.1.23 squidclamav V6 Weiß jemand weiter? cat /etc/squid/squid.conf: # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed # acl localnet src 10.0.0.0/8 # RFC1918 possible internal network # acl localnet src 172.16.0.0/12 # RFC1918 possible internal network # acl localnet src 192.168.0.0/16 # RFC1918 possible internal network # acl localnet src fc00::/7 # RFC 4193 local private network range # acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl localnet src 192.168.1.0/24 # home.haa acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager all # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet # Allow localhost always proxy functionality http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 3128 # Uncomment and adjust the following to add a disk cache directory. cache_dir aufs /var/cache/squid 512 16 256 # Leave coredumps in the first cache dir coredump_dir /var/cache/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 # ident_lookup_access deny all # logformat haa %ui %ts %a # access_log /var/log/squid/access.log haa #Ergänzungen von haa #Domainname anhängen falls keiner angegeben wird append_domain .home.haa #Privoxy als parent-cache aufrufen cache_peer localhost parent 8118 0 no-query no-digest no-netdb-exchange default no-delay #alle Anfragen über privoxy senden #never_direct allow all #ftp an privoxy vorbei holen hierarchy_stoplist ftp:// home.haa 192.168.1. # #ftp-user für anonoymous ftp einstellen ftp_user squid@gmx.com #Cache Manager email-Adresse angeben #cache_mgr dirk@home.haa # # Integration von squidclamav Virusscanner icap_enable on icap_preview_enable on icap_preview_size 128 icap_send_client_ip on #Ergänzung #icap_send_client_username on #icap_client_username_encode off #icap_client_username_header X-Authenticated-User icap_service service_req reqmod_precache bypass=1 icap://127.0.0.1:1344/squidclamav adaptation_access service_req deny CONNECT adaptation_access service_req allow all icap_service service_resp respmod_precache bypass=0 icap://127.0.0.1:1344/squidclamav adaptation_access service_resp deny CONNECT adaptation_access service_resp allow all -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
squidclamav funktioniert leider immer noch nicht. Hat niemand eine Idee? -- Dirk -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
participants (1)
-
Dirk Meier