Bootvorgang bleibt stecken
Hi, ich habe einen VServer mit dezidierten HDs. Dieser bleibt hin und wieder kurz nach dem Start mit "GR" nach der Kernelauswahl hängen. Ich starte den anschließend in Rescuemodus und führe mehrfach YaST -> System -> Bootloader und OK aus. Danach startet der Server normal. a) Kennt das jemand bzw. kann das abstellen? b) Gibt es einen Konsolenbefehl mit dem ich das machen kann? Danke Andreas -- ae | Andreas Ernst | IT Spektrum Postfach 5, 65612 Beselich Schupbacher Str. 32, 65614 Beselich, Germany Tel: +49-6484-91002 Fax: +49-6484-91003 ae@ae-online.de | www.ae-online.de www.tachyon-online.de
Am 26.01.22 um 17:42 schrieb Andreas Ernst:
Hi,
ich habe einen VServer mit dezidierten HDs. Dieser bleibt hin und wieder kurz nach dem Start mit "GR" nach der Kernelauswahl hängen.
Ich starte den anschließend in Rescuemodus und führe mehrfach YaST -> System -> Bootloader und OK aus. Danach startet der Server normal.
a) Kennt das jemand bzw. kann das abstellen? b) Gibt es einen Konsolenbefehl mit dem ich das machen kann?
Danke
Andreas
Hallo Andreas, da fehlen uns einfach noch ein paar Infos. Welche OpenSUSE Version ist im Einsatz? Ausgabe von: lsb_release -a Wie sieht das Partitionslayout der angeschlossenen Festplatten aus? Ausgabe von: fdisk -l Was wurde gemountet? Ausgabe von: mount Ausgabe von: lsblk Welche Config ist für Grub2 gesetzt? Inhalt von: /etc/default/grub Inhalt von: /boot/grub2/grub.cfg Welche Config ist für den YaST Bootloader gesetzt? Inhalt von: /etc/sysconfig/bootloader Vielleicht kann man ja mit den Angaben was herausfinden. -- Gruß Sebastian - openSUSE Member (Freespacer) - Wichtiger Hinweis zur openSUSE Mailing Liste: https://de.opensuse.org/openSUSE:Mailinglisten_Netiquette
Hallo Sebastian, danke für Deine Mail. Am 26.01.22 um 20:15 schrieb Sebastian Siebert:
Am 26.01.22 um 17:42 schrieb Andreas Ernst:
Hi,
ich habe einen VServer mit dezidierten HDs. Dieser bleibt hin und wieder kurz nach dem Start mit "GR" nach der Kernelauswahl hängen.
Ich starte den anschließend in Rescuemodus und führe mehrfach YaST -> System -> Bootloader und OK aus. Danach startet der Server normal.
a) Kennt das jemand bzw. kann das abstellen? b) Gibt es einen Konsolenbefehl mit dem ich das machen kann?
Danke
Andreas
Hallo Andreas,
da fehlen uns einfach noch ein paar Infos.
Welche OpenSUSE Version ist im Einsatz? Ausgabe von: lsb_release -a
mail:~ # lsb_release -a LSB Version: n/a Distributor ID: openSUSE Description: openSUSE Leap 15.3 Release: 15.3 Codename: n/a
Wie sieht das Partitionslayout der angeschlossenen Festplatten aus? Ausgabe von: fdisk -l
Was wurde gemountet? Ausgabe von: mount Ausgabe von: lsblk
mail:~ # fdisk -l Festplatte /dev/sda: 1,63 TiB, 1793148846080 Bytes, 3502243840 Sektoren Festplattenmodell: debian80-x86_64- Einheiten: Sektoren von 1 * 512 = 512 Bytes Sektorgröße (logisch/physikalisch): 512 Bytes / 4096 Bytes E/A-Größe (minimal/optimal): 4096 Bytes / 4096 Bytes Festplattenbezeichnungstyp: gpt Festplattenbezeichner: BA3ECBB4-DF03-4F19-9AB3-DC0FCFFF1C2D Gerät Anfang Ende Sektoren Größe Typ /dev/sda1 2048 4208639 4206592 2G Linux Swap /dev/sda2 4208640 3502241791 3498033152 1,6T EFI-System mail:~ # lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 1,6T 0 disk ├─sda1 8:1 0 2G 0 part [SWAP] └─sda2 8:2 0 1,6T 0 part / sr0 11:0 1 1024M 0 rom
Welche Config ist für Grub2 gesetzt? Inhalt von: /etc/default/grub
mail:~ # cat /etc/default/grub # Modified by YaST2. Last modification on Mi Nov 11 16:21:28 CET 2015 # THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader # For the new kernel it try to figure out old parameters. In case we are not able to recognize it (e.g. change of flavor or strange install order ) it it use as fallback installation parameters from /etc/sysconfig/bootloader # If you change this file, run 'grub2-mkconfig -o /boot/grub2/grub.cfg' afterwards to update # /boot/grub2/grub.cfg. GRUB_DISTRIBUTOR= GRUB_DEFAULT=saved GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=8 GRUB_CMDLINE_LINUX_DEFAULT="video=1024x768 resume=/dev/disk/by-id/ata-debian80-x86_64-he-vmtempl-0_SSMZNEJFYRVMX22VJ118-part1 splash=silent quiet showopts idle=nomwait" # kernel command line options for failsafe mode GRUB_CMDLINE_LINUX_RECOVERY="showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) GRUB_TERMINAL=gfxterm # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=auto # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_LINUX_RECOVERY=true # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" # Skip 30_os-prober if you experienced very slow in probing them # WARNING foregin OS menu entries will be lost if set true here GRUB_DISABLE_OS_PROBER=false GRUB_THEME=/boot/grub2/themes/openSUSE/theme.txt GRUB_BACKGROUND=
Inhalt von: /boot/grub2/grub.cfg
mail:~ # cat /etc/default/grub # Modified by YaST2. Last modification on Mi Nov 11 16:21:28 CET 2015 # THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader # For the new kernel it try to figure out old parameters. In case we are not able to recognize it (e.g. change of flavor or strange install order ) it it use as fallback installation parameters from /etc/sysconfig/bootloader # If you change this file, run 'grub2-mkconfig -o /boot/grub2/grub.cfg' afterwards to update # /boot/grub2/grub.cfg. GRUB_DISTRIBUTOR= GRUB_DEFAULT=saved GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=8 GRUB_CMDLINE_LINUX_DEFAULT="video=1024x768 resume=/dev/disk/by-id/ata-debian80-x86_64-he-vmtempl-0_SSMZNEJFYRVMX22VJ118-part1 splash=silent quiet showopts idle=nomwait" # kernel command line options for failsafe mode GRUB_CMDLINE_LINUX_RECOVERY="showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) GRUB_TERMINAL=gfxterm # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=auto # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_LINUX_RECOVERY=true # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" # Skip 30_os-prober if you experienced very slow in probing them # WARNING foregin OS menu entries will be lost if set true here GRUB_DISABLE_OS_PROBER=false GRUB_THEME=/boot/grub2/themes/openSUSE/theme.txt GRUB_BACKGROUND= mail:~ # cat /boot/grub2/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub2-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -f ${config_directory}/grubenv ]; then load_env -f ${config_directory}/grubenv elif [ -s $prefix/grubenv ]; then load_env fi if [ "${env_block}" ] ; then set env_block="(${root})${env_block}" export env_block load_env -f "${env_block}" fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry if [ "${env_block}" ] ; then save_env -f "${env_block}" next_entry fi set boot_once=true else set default="${saved_entry}" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" if [ "${env_block}" ] ; then save_env -f "${env_block}" saved_entry else save_env saved_entry fi fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi font="/usr/share/grub2/unicode.pf2" fi if loadfont $font ; then if [ "${grub_platform}" = "efi" ]; then echo "Please press 't' to show the boot menu on this console" fi set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=de_DE insmod gettext fi terminal_input console terminal_output gfxterm insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi insmod gfxmenu loadfont ($root)/boot/grub2/themes/openSUSE/ascii.pf2 loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans10.pf2 loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans12.pf2 loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans-Bold14.pf2 insmod png set theme=($root)/boot/grub2/themes/openSUSE/theme.txt export theme if [ x${boot_once} = xtrue ]; then set timeout=0 elif [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=8 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=8 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/00_tuned ### set tuned_params="" set tuned_initrd="" ### END /etc/grub.d/00_tuned ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'openSUSE Leap 15.3' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-60829f48-c32a-4787-b280-a644e969d829' { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi echo 'Loading Linux 5.3.18-150300.59.43-preempt ...' linux /boot/vmlinuz-5.3.18-150300.59.43-preempt root=UUID=60829f48-c32a-4787-b280-a644e969d829 video=1024x768 resume=/dev/disk/by-id/ata-debian80-x86_64-he-vmtempl-0_SSMZNEJFYRVMX22VJ118-part1 splash=silent quiet showopts idle=nomwait echo 'Loading initial ramdisk ...' initrd /boot/initrd-5.3.18-150300.59.43-preempt } submenu 'Advanced options for openSUSE Leap 15.3' --hotkey=1 $menuentry_id_option 'gnulinux-advanced-60829f48-c32a-4787-b280-a644e969d829' { menuentry 'openSUSE Leap 15.3, with Linux 5.3.18-150300.59.43-preempt' --hotkey=2 --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.18-150300.59.43-preempt-advanced-60829f48-c32a-4787-b280-a644e969d829' { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi echo 'Loading Linux 5.3.18-150300.59.43-preempt ...' linux /boot/vmlinuz-5.3.18-150300.59.43-preempt root=UUID=60829f48-c32a-4787-b280-a644e969d829 video=1024x768 resume=/dev/disk/by-id/ata-debian80-x86_64-he-vmtempl-0_SSMZNEJFYRVMX22VJ118-part1 splash=silent quiet showopts idle=nomwait echo 'Loading initial ramdisk ...' initrd /boot/initrd-5.3.18-150300.59.43-preempt } menuentry 'openSUSE Leap 15.3, with Linux 5.3.18-150300.59.43-preempt (recovery mode)' --hotkey=3 --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.18-150300.59.43-preempt-recovery-60829f48-c32a-4787-b280-a644e969d829' { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi echo 'Loading Linux 5.3.18-150300.59.43-preempt ...' linux /boot/vmlinuz-5.3.18-150300.59.43-preempt root=UUID=60829f48-c32a-4787-b280-a644e969d829 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe echo 'Loading initial ramdisk ...' initrd /boot/initrd-5.3.18-150300.59.43-preempt } menuentry 'openSUSE Leap 15.3, with Linux 5.3.18-150300.59.43-default' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.18-150300.59.43-default-advanced-60829f48-c32a-4787-b280-a644e969d829' { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi echo 'Loading Linux 5.3.18-150300.59.43-default ...' linux /boot/vmlinuz-5.3.18-150300.59.43-default root=UUID=60829f48-c32a-4787-b280-a644e969d829 video=1024x768 resume=/dev/disk/by-id/ata-debian80-x86_64-he-vmtempl-0_SSMZNEJFYRVMX22VJ118-part1 splash=silent quiet showopts idle=nomwait echo 'Loading initial ramdisk ...' initrd /boot/initrd-5.3.18-150300.59.43-default } menuentry 'openSUSE Leap 15.3, with Linux 5.3.18-150300.59.43-default (recovery mode)' --hotkey=1 --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.18-150300.59.43-default-recovery-60829f48-c32a-4787-b280-a644e969d829' { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi echo 'Loading Linux 5.3.18-150300.59.43-default ...' linux /boot/vmlinuz-5.3.18-150300.59.43-default root=UUID=60829f48-c32a-4787-b280-a644e969d829 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe echo 'Loading initial ramdisk ...' initrd /boot/initrd-5.3.18-150300.59.43-default } menuentry 'openSUSE Leap 15.3, with Linux 5.3.18-59.40-preempt' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.18-59.40-preempt-advanced-60829f48-c32a-4787-b280-a644e969d829' { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi echo 'Loading Linux 5.3.18-59.40-preempt ...' linux /boot/vmlinuz-5.3.18-59.40-preempt root=UUID=60829f48-c32a-4787-b280-a644e969d829 video=1024x768 resume=/dev/disk/by-id/ata-debian80-x86_64-he-vmtempl-0_SSMZNEJFYRVMX22VJ118-part1 splash=silent quiet showopts idle=nomwait echo 'Loading initial ramdisk ...' initrd /boot/initrd-5.3.18-59.40-preempt } menuentry 'openSUSE Leap 15.3, with Linux 5.3.18-59.40-preempt (recovery mode)' --hotkey=1 --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.18-59.40-preempt-recovery-60829f48-c32a-4787-b280-a644e969d829' { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi echo 'Loading Linux 5.3.18-59.40-preempt ...' linux /boot/vmlinuz-5.3.18-59.40-preempt root=UUID=60829f48-c32a-4787-b280-a644e969d829 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe echo 'Loading initial ramdisk ...' initrd /boot/initrd-5.3.18-59.40-preempt } menuentry 'openSUSE Leap 15.3, with Linux 5.3.18-59.40-default' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.18-59.40-default-advanced-60829f48-c32a-4787-b280-a644e969d829' { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi echo 'Loading Linux 5.3.18-59.40-default ...' linux /boot/vmlinuz-5.3.18-59.40-default root=UUID=60829f48-c32a-4787-b280-a644e969d829 video=1024x768 resume=/dev/disk/by-id/ata-debian80-x86_64-he-vmtempl-0_SSMZNEJFYRVMX22VJ118-part1 splash=silent quiet showopts idle=nomwait echo 'Loading initial ramdisk ...' initrd /boot/initrd-5.3.18-59.40-default } menuentry 'openSUSE Leap 15.3, with Linux 5.3.18-59.40-default (recovery mode)' --hotkey=1 --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.18-59.40-default-recovery-60829f48-c32a-4787-b280-a644e969d829' { load_video set gfxpayload=keep insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint='hd0,gpt2' 60829f48-c32a-4787-b280-a644e969d829 else search --no-floppy --fs-uuid --set=root 60829f48-c32a-4787-b280-a644e969d829 fi echo 'Loading Linux 5.3.18-59.40-default ...' linux /boot/vmlinuz-5.3.18-59.40-default root=UUID=60829f48-c32a-4787-b280-a644e969d829 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe echo 'Loading initial ramdisk ...' initrd /boot/initrd-5.3.18-59.40-default } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### ### BEGIN /etc/grub.d/80_suse_btrfs_snapshot ### ### END /etc/grub.d/80_suse_btrfs_snapshot ### ### BEGIN /etc/grub.d/90_persistent ### ### END /etc/grub.d/90_persistent ### ### BEGIN /etc/grub.d/95_textmode ### if [ "${grub_platform}" = "efi" ]; then # On EFI systems we can only have graphics *or* serial, so allow the user # to switch between the two hiddenentry 'Text mode' --hotkey 't' { set textmode=true terminal_output console } fi ### END /etc/grub.d/95_textmode ###
Welche Config ist für den YaST Bootloader gesetzt? Inhalt von: /etc/sysconfig/bootloader
mail:~ # cat /etc/sysconfig/bootloader ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: list(grub,lilo,none) ## Default: grub # # Type of bootloader in use. # For making the change effect run bootloader configuration tool # and configure newly selected bootloader # # LOADER_TYPE="grub2" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: yesno ## Default: "no" # # Enable UEFI Secure Boot support # This setting is only relevant to UEFI which supports UEFI. It won't # take effect on any other firmware type. # # SECURE_BOOT="no" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: string ## Default: "splash=silent quiet showotps" # # Arguments for kernel which is used like default boot section. # If the options is commented perl-Bootloader uses his default arguments # for kernel. # DEFAULT_APPEND=" video=1024x768 resume=/dev/disk/by-id/ata-debian80-x86_64-he-vmtempl-0_SSMZNEJFYRVMX22VJ118-part1 splash=silent quiet showopts" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: string ## Default: none # # VGA option for kernel which is used like default boot section. # If the options is commented or empty perl-Bootloader doesn't use it. # Empty option could be cause of broken size of fonts etc. # DEFAULT_VGA="0x317" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: string ## Default: "showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe" # # Arguments for kernel which is used like failsafe boot section # If the options is commented perl-Bootloader uses his default arguments # for kernel. # FAILSAFE_APPEND="showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: string ## Default: none # # VGA option for kernel which is used like failsafe boot section. # If the options is commented or empty perl-Bootloader doesn't use it. # Empty option could be cause of broken size of fonts etc. # FAILSAFE_VGA="" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: string ## Default: "splash=silent quiet showotps" # # Arguments for XEN kernel in Dom0. # If the options is commented perl-Bootloader uses his default arguments # for XEN kernel. # XEN_KERNEL_APPEND=" video=1024x768 resume=/dev/disk/by-id/ata-debian80-x86_64-he-vmtempl-0_SSMZNEJFYRVMX22VJ118-part1 splash=silent quiet showopts" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: string ## Default: none # # Arguments for XEN hypervisor # Usually it is empty or includes arguments like crashkernel for kdump etc. # XEN_APPEND="" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: string ## Default: none # # VGA option for XEN kernel. # If the options is commented or empty perl-Bootloader doesn't use it. # Empty option could be cause of broken size of fonts etc. # XEN_VGA="0x317" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: yesno ## Default: no # # Should the boot cycle detection be used to # avoid unconditional reboot cycles of not # supervised system. # CYCLE_DETECTION="no" ## Type: integer(0:) ## Default: 1 # # The number of the entry in grub's menu.lst # which should be used on the next reboot cycle. # Note that the first entry has the number 0. # CYCLE_NEXT_ENTRY="1" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: yesno ## Default: "no" # # Enable Trusted Boot support # Only available for legacy (non-UEFI) boot. # TRUSTED_BOOT="no" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: yesno ## Default: "yes" # # Update nvram boot settings (UEFI, OF) # Unset to preserve specific settings or workaround firmware issues. # UPDATE_NVRAM="yes"
Vielleicht kann man ja mit den Angaben was herausfinden. -- Gruß Sebastian - openSUSE Member (Freespacer) - Wichtiger Hinweis zur openSUSE Mailing Liste: https://de.opensuse.org/openSUSE:Mailinglisten_Netiquette
Ich hatte gehofft, das es etwas einfacher ist, denn sonst mache ich das weiter mit YaST. Beste Grüße Andreas -- ae | Andreas Ernst | IT Spektrum Postfach 5, 65612 Beselich Schupbacher Str. 32, 65614 Beselich, Germany Tel: +49-6484-91002 Fax: +49-6484-91003 ae@ae-online.de | www.ae-online.de www.tachyon-online.de
participants (2)
-
Andreas Ernst
-
Sebastian Siebert