Hallo! Ich habe einen Memorex BBQ200 CD ReWriter. Das Ding mag allerdings keine CDs schreiben. SuSE 7.3, alle aktuellen Patche drin. Das Gerät wird als /dev/sr0 erkannt. CD's lassen sich mounten und problemlos lesen. Unter KOnCD läßt sich der Brenner auch auswählen. Versucht man dann zu brennen gibt es folgende Fehlermeldung. cdrecord: Cannot get disk type. [Den Rest des Logs findet Ihr weiter unten] Die Rohlinge lassen sich unter Windoof beschreiben, also kann es eigentlich nicht an denen liegen ... Wer weiß Rat. Oder gibt es einen anderen USB Brenner, mit dem jemand Erfolg hatte?? Christian Gauer --- scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.20 Cdrecord 1.11a05 (i686-suse-linux) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'Memorex ' Identifikation : '16MAXX 1040JB ' Revision : 'OWS1' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1966272 = 1920 KB cdrecord: Input/output error. read disk info: scsi sendcmd: no error CDB: 51 00 00 00 00 00 00 00 04 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 28 00 00 00 Sense Key: 0x6 Unit Attention, Segment 0 Sense Code: 0x28 Qual 0x00 (not ready to ready change, medium may have changed) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.258s timeout 240s cdrecord: Cannot get disk type. Current Secsize: 0 Error, Exit status: 255 scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.20 scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.20 Cdrecord 1.11a05 (i686-suse-linux) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'Memorex ' Identifikation : '16MAXX 1040JB ' Revision : 'OWS1' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1966272 = 1920 KB Cdrecord 1.11a05 (i686-suse-linux) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'Memorex ' Identifikation : '16MAXX 1040JB ' Revision : 'OWS1' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1966272 = 1920 KB cdrecord: Input/output error. read disk info: scsi sendcmd: no error CDB: 51 00 00 00 00 00 00 00 04 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 28 00 00 00 Sense Key: 0x6 Unit Attention, Segment 0 Sense Code: 0x28 Qual 0x00 (not ready to ready change, medium may have changed) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.146s timeout 240s cdrecord: Cannot get disk type. cdrecord: Input/output error. read disk info: scsi sendcmd: no error CDB: 51 00 00 00 00 00 00 00 04 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 28 00 00 00 Sense Key: 0x6 Unit Attention, Segment 0 Sense Code: 0x28 Qual 0x00 (not ready to ready change, medium may have changed) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.146s timeout 240s cdrecord: Cannot get disk type. Current Secsize: 0 Current Secsize: 0 Error, Exit status: 255 Error, Exit status: 255 Christian Gauer --- Lutz Computer Systeme Christian Gauer - Systemadministration Tel. +49 (089) 6106660