Hallo! Ich mach's diesmal ganz kurz. Bis auf den USB-Scanner scheint jetzt alles zu laufen. Wie krieg ich den jetzt auch noch zum Laufen? Es ist ein Epson 1260 Ggf. wäre es prima, wenn mir jemand auch den passenden Ausschnitt aus seiner config -Datei zusendet. Vielen Dank schon mal im voraus! Gruß, Jürgen
Am Samstag, 13. März 2004 13:35 schrieb Jürgen Fahnenschreiber:
Hallo!
Ich mach's diesmal ganz kurz. Bis auf den USB-Scanner scheint jetzt alles zu laufen. Wie krieg ich den jetzt auch noch zum Laufen? Es ist ein Epson 1260 Ggf. wäre es prima, wenn mir jemand auch den passenden Ausschnitt aus seiner config -Datei zusendet. Vielen Dank schon mal im voraus! Gruß,
Jürgen Folgenden Eintrag hab ich in der /var/log/messages nach dem booten:
Mar 14 06:54:17 linux0 /sbin/hotplug[3092]: no runnable /etc/ hotplug/block.agent is installed Mar 14 06:54:17 linux0 kernel: Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1 Mar 14 06:54:17 linux0 kernel: Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2 Mar 14 06:54:17 linux0 /sbin/hotplug[3099]: no runnable /etc/ hotplug/block.agent is installed Mar 14 06:54:22 linux0 kernel: Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3 Mar 14 06:54:22 linux0 /sbin/hotplug[3106]: no runnable /etc/ hotplug/block.agent is installed Mar 14 06:54:30 linux0 kdm[2734]: pam_unix2: session started for user fahnenju, service xdm Kann es sein, das Kernel 2.6.4 Probleme mit hotplug hat? Gruß, Jürgen
From: "Jürgen Fahnenschreiber"
[...] Folgenden Eintrag hab ich in der /var/log/messages nach dem booten:
Mar 14 06:54:17 linux0 /sbin/hotplug[3092]: no runnable /etc/ hotplug/block.agent is installed Mar 14 06:54:17 linux0 kernel: Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1 Mar 14 06:54:17 linux0 kernel: Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2 Mar 14 06:54:17 linux0 /sbin/hotplug[3099]: no runnable /etc/ hotplug/block.agent is installed Mar 14 06:54:22 linux0 kernel: Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3 Mar 14 06:54:22 linux0 /sbin/hotplug[3106]: no runnable /etc/ hotplug/block.agent is installed Mar 14 06:54:30 linux0 kdm[2734]: pam_unix2: session started for user fahnenju, service xdm
Kann es sein, das Kernel 2.6.4 Probleme mit hotplug hat?
Hast Du denn hier mal nachgeschaut? ftp://ftp.leo.org/pub/comp/os/unix/linux/suse/people/kraxel/8.2-i386/noarch/ bzw. ftp://ftp.leo.org/pub/comp/os/unix/linux/suse/people/kraxel/9.0-i386/noarch/
Gruß,
Jürgen
Gruß Torsten
Am Sonntag, 14. März 2004 07:12 schrieb Torsten E.:
From: "Jürgen Fahnenschreiber"
Sent: Sunday, March 14, 2004 6:58 AM Guten Morgen,
[...]
Folgenden Eintrag hab ich in der /var/log/messages nach dem booten:
Mar 14 06:54:17 linux0 /sbin/hotplug[3092]: no runnable /etc/ hotplug/block.agent is installed Mar 14 06:54:17 linux0 kernel: Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1 Mar 14 06:54:17 linux0 kernel: Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2 Mar 14 06:54:17 linux0 /sbin/hotplug[3099]: no runnable /etc/ hotplug/block.agent is installed Mar 14 06:54:22 linux0 kernel: Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3 Mar 14 06:54:22 linux0 /sbin/hotplug[3106]: no runnable /etc/ hotplug/block.agent is installed Mar 14 06:54:30 linux0 kdm[2734]: pam_unix2: session started for user fahnenju, service xdm
Kann es sein, das Kernel 2.6.4 Probleme mit hotplug hat?
Hast Du denn hier mal nachgeschaut? ftp://ftp.leo.org/pub/comp/os/unix/linux/suse/people/kraxel/8.2-i 386/noarch/ bzw. ftp://ftp.leo.org/pub/comp/os/unix/linux/suse/people/kraxel/9.0-i 386/noarch/
Gruß, Jürgen Gruß Torsten Danke für den Tip. Hab mir hotplug für 9.0 installiert. Jetzt krieg ich aber reihenweise (Fehler-) Meldungen beim Booten:
Configured serial ports doneHotplug: enabling agents for block ccw ccwgroup dasd firmware ide ieee1394 input macio mem misc net pci scsi scsi_device scsi_host sound tape tty usb usb_host video done Initializing random number generatordone Starting Firewall Initialization (phase 1 of 3) ERROR: No configuration found for sit0 done <notice>exit status of (setserial random hotplug SuSEfirewall2_init) is (0 0 0 0) <notice>start services (coldplug) No CCW bus support [mntent]: warning: no final newline at the end of /etc/fstab done <notice>exit status of (coldplug) is (0) cat: /sys//devices/pci0000:00/0000:00:13.0/usb1/bNumConfigurations: No such file or directory /etc/hotplug/usb.agent: line 140: [: too many arguments cat: /sys//devices/pci0000:00/0000:00:13.1/usb2/bNumConfigurations: No such file or directory /etc/hotplug/usb.agent: line 140: [: too many arguments <notice>start services (network) cat: /sys//devices/pci0000:00/0000:00:13.0/usb1/1-1/ bNumConfigurations: No such file or directory /etc/hotplug/usb.agent: line 140: [: too many arguments cat: /sys//devices/pci0000:00/0000:00:13.0/usb1/1-2/ bNumConfigurations: No such file or directory /etc/hotplug/usb.agent: line 140: [: too many arguments cat: /sys//devices/pci0000:00/0000:00:13.1/usb2/2-1/ bNumConfigurations: No such file or directory /etc/hotplug/usb.agent: line 140: [: too many arguments /etc/hotplug/sound.agent: line 23: /sbin/udev: No such file or directory cat: /sys//devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1.1/ bNumConfigurations: No such file or directory /etc/hotplug/usb.agent: line 140: [: too many arguments Setting up network interfaces: lo cat: /sys//devices/pci0000:00/0000:00:13.1/ usb2/2-1/2-1.3/bNumConfigurations: No such file or directory /etc/hotplug/usb.agent: line 140: [: too many arguments ... no modules for USB product 4b8/11d/100 /etc/hotplug/sound.agent: line 23: /sbin/udev: No such file or directory /etc/hotplug/sound.agent: line 23: /sbin/udev: No such file or directory /etc/hotplug/sound.agent: line 23: /sbin/udev: No such file or directory /etc/hotplug/sound.agent: line 23: /sbin/udev: No such file or directory /etc/hotplug/sound.agent: line 23: /sbin/udev: No such file or directory /etc/hotplug/sound.agent: line 23: /sbin/udev: No such file or directory modprobe: FATAL: Module hid already in kernel. ... can't load module hid missing kernel or user mode driver hid bogus sysfs DEVPATH=/devices/pci0000:00/0000:00:13.1/ usb2/2-1/2-1.3/2-1.3:1.0/host0/0:0:0:0 bogus sysfs DEVPATH=/devices/pci0000:00/0000:00:13.1/ usb2/2-1/2-1.3/2-1.3:1.0/host0/0:0:0:1 bogus sysfs DEVPATH=/devices/pci0000:00/0000:00:13.1/ usb2/2-1/2-1.3/2-1.3:1.0/host0/0:0:0:2 /etc/hotplug/scsi_host.agent: line 13: cd: /etc/hotplug-beta: No such file or directory modprobe: FATAL: Error inserting shpchp (/lib/ modules/2.6.4-0-default/kernel/drivers/pci/hotplug/shpchp.ko): Operation not permitted modprobe: WARNING: Error inserting agpgart (/lib/ modules/2.6.4-0-default/kernel/drivers/char/agp/agpgart.ko): Unknown symbol in module, or unknown parameter (see dmesg) bogus sysfs DEVPATH=/devices/pci0000:00/0000:00:13.1/ usb2/2-1/2-1.3/2-1.3:1.0/host0/0:0:0:3 done eth0 modprobe: FATAL: Error inserting sis_agp (/lib/ modules/2.6.4-0-default/kernel/drivers/char/agp/sis-agp.ko): Unknown symbol in module, or unknown parameter (see dmesg) IP/Netmask: 192.168.0.10 / 255.255.255.0 done dsl0 done Anscheinend fehlt noch "hid" zum Aktualisieren. Sound und Netzwerk funzen. Scanner wird immer noch nicht gefunden. Gruß, Jürgen
participants (2)
-
Jürgen Fahnenschreiber
-
Torsten E.