wlan BCM4306 auf IBM Think Pad T40 OpenSUSE 11.2
Hallo Leute, ich habe einen IBM Think Pad T40 mit einer broadcom wlan-Schnittstelle. Installiert ist SuSE 11.2 Mir gelingt es nicht wlan ans Laufen zu bringen. Syslog: Jan 31 18:11:05 gomse-linux kernel: [36560.500137] b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 Jan 31 18:11:05 gomse-linux kernel: [36560.503649] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 Jan 31 18:11:05 gomse-linux kernel: [36560.555624] b43-phy0: Broadcom 4306 WLAN found (core revision 5) Jan 31 18:11:05 gomse-linux kernel: [36560.602359] phy0: Selected rate control algorithm 'minstrel' Jan 31 18:11:05 gomse-linux kernel: [36560.605385] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ] Jan 31 18:11:05 gomse-linux ifup: interface 'wmaster0' is a wlan helper interface. Exiting. Jan 31 18:11:05 gomse-linux ifup: Service network not started and mode 'auto' -> skipping Jan 31 18:11:10 gomse-linux kernel: [36565.024211] b43 ssb0:0: firmware: requesting b43/ucode5.fw Jan 31 18:11:10 gomse-linux kernel: [36565.463741] b43 ssb0:0: firmware: requesting b43/pcm5.fw Jan 31 18:11:10 gomse-linux kernel: [36565.480196] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw Jan 31 18:11:10 gomse-linux kernel: [36565.488443] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw Jan 31 18:11:10 gomse-linux kernel: [36565.612169] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) Jan 31 18:11:10 gomse-linux kernel: [36565.665262] Registered led device: b43-phy0::tx Jan 31 18:11:10 gomse-linux kernel: [36565.665341] Registered led device: b43-phy0::rx Jan 31 18:11:10 gomse-linux kernel: [36565.665421] Registered led device: b43-phy0::radio Jan 31 18:11:10 gomse-linux kernel: [36565.699013] ADDRCONF(NETDEV_UP): wlan0: link is not ready gomse-linux:~ # lspci -vnn | grep 14e4 02:02.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Subsystem: Broadcom Corporation Device [14e4:0418] Ich habe schon alle Versionen von http://linuxwireless.org/en/users/Drivers/b43#b43_and_b43legacy ausprobiert. ndiswrapper scheitert, weil ich nicht den passenden XP-Treiber finde. Kann mir jemand helfen? Danke Günter -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo Günter Am 31.01.2010 18:35, schrieb Günter Ohmer:
Hallo Leute,
gomse-linux:~ # lspci -vnn | grep 14e4 02:02.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Subsystem: Broadcom Corporation Device [14e4:0418] Ich hab das kürzlich auf einem Laptop mit dem gleichen Wlan-chip durchexerziert, und hatte letzlich Erfolg mit:
...~> sudo /usr/sbin/install_bcm43xx_firmware (das Kommando hast du vmtl. auch schon) und danach als su: ..# /etc/init.d/network restart Alles weitere dann mit dem Networkmanager, und *nicht* per Yast! Viel Erfolg Werner -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Werner Tietz´s Tastaturgeklapper am Sonntag, 31. Januar 2010 :
Hallo Günter
Am 31.01.2010 18:35, schrieb Günter Ohmer:
Hallo Leute,
gomse-linux:~ # lspci -vnn | grep 14e4 02:02.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Subsystem: Broadcom Corporation Device [14e4:0418]
Ich hab das kürzlich auf einem Laptop mit dem gleichen Wlan-chip durchexerziert, und hatte letzlich Erfolg mit:
...~> sudo /usr/sbin/install_bcm43xx_firmware
(das Kommando hast du vmtl. auch schon) und danach als su:
..# /etc/init.d/network restart
Alles weitere dann mit dem Networkmanager, und *nicht* per Yast!
Viel Erfolg Werner
Hi Günter, Ich hatte das T40 unter 10.3. Wie Werner schon schrieb, muss die firmware installiert sein. Was dir noch passieren kann, dass das T40 nicht mehr hochfährt mit der Meldung falsche Wlan-Schnittstelle oder so. Musste die Karte ausbauen dann gings wieder. Falls das passiert hab ich noch den Patch von meinem Händler (tb-computers.de) damit's wieder funktioniert. Gruß Lutz -- http://www.linux-beginnerforum.de -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo Werner, Hallo Lutz, Am Montag, 1. Februar 2010 um 12:06 schrieb Lutz Weber:
Werner Tietz´s Tastaturgeklapper am Sonntag, 31. Januar 2010 :
Hallo Günter
Am 31.01.2010 18:35, schrieb Günter Ohmer:
Hallo Leute,
gomse-linux:~ # lspci -vnn | grep 14e4 02:02.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Subsystem: Broadcom Corporation Device [14e4:0418]
Ich hab das kürzlich auf einem Laptop mit dem gleichen Wlan-chip durchexerziert, und hatte letzlich Erfolg mit:
...~> sudo /usr/sbin/install_bcm43xx_firmware
(das Kommando hast du vmtl. auch schon) und danach als su:
..# /etc/init.d/network restart
Ich habe vor dem Laden der neuen Firmware das Verzeichnis /lib/firmware/b43 gelöscht, um ganz sicher zu gehen, dass da nicht noch irgend welcher Schrott drin steht. Nach "modprobe -r b43" und "und "modprobe b43" hatte das Ding Kontakt. Der ping mit -I wlan0 hat funktioniert
Alles weitere dann mit dem Networkmanager, und *nicht* per Yast!
Die Wiederholung mit dem Networkmanager hat dann nicht geklappt und mit YAST geht jetzt auch nichts mehr. Ich habe folgenden Effekt beobachtet: ==================================== Feb 1 18:36:03 gomse-linux kernel: [ 624.024069] wlan0: authentication with AP 00:18:39:c7:28:d7 timed out Feb 1 18:36:15 gomse-linux kernel: [ 636.248405] wlan0: authenticate with AP 00:18:39:c7:28:d7 Feb 1 18:36:15 gomse-linux kernel: [ 636.250002] wlan0: authenticated Feb 1 18:36:15 gomse-linux kernel: [ 636.250011] wlan0: associate with AP 00:18:39:c7:28:d7 Feb 1 18:36:15 gomse-linux kernel: [ 636.252503] wlan0: RX AssocResp from 00:18:39:c7:28:d7 (capab=0x411 status=0 aid=1) Feb 1 18:36:15 gomse-linux kernel: [ 636.252516] wlan0: associated Feb 1 18:36:15 gomse-linux kernel: [ 636.254144] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Feb 1 18:36:16 gomse-linux avahi-daemon[2690]: Registering new address record for fe80::290:4bff:fe87:c9c0 on wlan0.*. Feb 1 18:36:25 gomse-linux kernel: [ 646.692132] wlan0: no IPv6 routers present Feb 1 18:42:51 gomse-linux kernel: [ 1032.508065] wlan0: no probe response from AP 00:18:39:c7:28:d7 - disassociating Feb 1 18:42:59 gomse-linux kernel: [ 1040.528811] wlan0: authenticate with AP 00:18:39:c7:28:d7 Feb 1 18:42:59 gomse-linux kernel: [ 1040.728166] wlan0: authenticate with AP 00:18:39:c7:28:d7 Feb 1 18:42:59 gomse-linux kernel: [ 1040.928065] wlan0: authenticate with AP 00:18:39:c7:28:d7 Feb 1 18:43:00 gomse-linux kernel: [ 1041.128062] wlan0: authentication with AP 00:18:39:c7:28:d7 timed out Feb 1 18:51:10 gomse-linux kernel: [ 1531.080158] wlan0: authentication with AP 00:18:39:c7:28:d7 timed out Feb 1 18:51:22 gomse-linux kernel: [ 1543.328443] wlan0: authenticate with AP 00:18:39:c7:28:d7 Feb 1 18:51:22 gomse-linux kernel: [ 1543.329978] wlan0: authenticated Feb 1 18:51:22 gomse-linux kernel: [ 1543.329988] wlan0: associate with AP 00:18:39:c7:28:d7 Feb 1 18:51:22 gomse-linux kernel: [ 1543.332520] wlan0: RX ReassocResp from 00:18:39:c7:28:d7 (capab=0x411 status=0 aid=1) Feb 1 18:51:22 gomse-linux kernel: [ 1543.332531] wlan0: associated Feb 1 19:23:41 gomse-linux dhcpcd[4698]: wlan0: renewing lease of 192.168.1.106 Feb 1 19:23:41 gomse-linux dhcpcd[4698]: wlan0: leased 192.168.1.106 for 86400 seconds Feb 1 19:23:41 gomse-linux dhcpcd[4698]: wlan0: no renewal time supplied, assuming 43200 seconds Feb 1 19:23:41 gomse-linux dhcpcd[4698]: wlan0: no rebind time supplied, assuming 75600 seconds Feb 1 19:23:41 gomse-linux dhcpcd[4698]: wlan0: adding IP address 192.168.1.106/24 Feb 1 19:23:41 gomse-linux dhcpcd[4698]: wlan0: adding default route via 192.168.1.1 metric 0 Feb 1 19:23:41 gomse-linux ifup: wlan0 name: BCM4306 802.11b/g Wireless LAN Controller Feb 1 19:27:17 gomse-linux kernel: [ 3698.992155] wlan0: no probe response from AP 00:18:39:c7:28:d7 - disassociating Feb 1 19:27:26 gomse-linux kernel: [ 3707.004275] wlan0: authenticate with AP 00:18:39:c7:28:d7 ================================================== Das bedeutet doch, dass zwischendurch die Verbindung steht und eine IP-Adresse zugeordnet wird. Nach einigen Minuten bricht das wieder ab.
Ich hatte das T40 unter 10.3. Wie Werner schon schrieb, muss die firmware installiert sein.
Was dir noch passieren kann, dass das T40 nicht mehr hochfährt mit der Meldung falsche Wlan-Schnittstelle oder so. Musste die Karte ausbauen dann gings wieder. Falls das passiert hab ich noch den Patch von meinem Händler (tb-computers.de) damit's wieder funktioniert.
Entweder ist der Patch schon eingespielt, oder ich habe einen anderen Chip? Das funktioniert bei mir jedenfalls. Hat da jemand eine Idee? Wo wird der wpa_supplicant gestartet, damit ich da -dd eintragen kann? Vielleicht hilft das weiter. Viele Grüße Günter -- -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
participants (3)
-
Günter Ohmer
-
Lutz Weber
-
Werner Tietz