Qmapshack startet nicht mehr
Hallo, ich habe festgestellt, dass mein installiertes qmapshack nicht mehr startet, was es bereits oft gemacht hat. Leider kann ich nicht mehr genaus sagen, nach welcher Veränderung dies eingetreten ist. Ich vermute, dass es nach der Installation von Grass war, das ebenfalls nicht startet. Die Fehlermeldung von qmapshack ist: ~> qmapshack qmapshack: symbol lookup error: /usr/lib64/libspatialite.so.8: undefined symbol: fre exl_open_ods System ist Leap 15.5 und qmapshack 1.17.0-lp155.1.4 aus dem Repo: Applications related to the earth. Die etwas neuere Version 1.17.0-lp155.3.1 von Sauerland lässt sich nicht installieren mit der Fehlermeldung: libgdal.so32()(64bit) kann nicht bereit gestellt werden. Installiert ist bei mir die libgdal.so34 Kann jemand helfen. -- Dirk
Am Mittwoch, 20. März 2024, 18:36:38 CET schrieb Dirk Meier:
Hallo, ich habe festgestellt, dass mein installiertes qmapshack nicht mehr startet, was es bereits oft gemacht hat. Leider kann ich nicht mehr genaus sagen, nach welcher Veränderung dies eingetreten ist. Ich vermute, dass es nach der Installation von Grass war, das ebenfalls nicht startet. Die Fehlermeldung von qmapshack ist: ~> qmapshack qmapshack: symbol lookup error: /usr/lib64/libspatialite.so.8: undefined symbol: fre exl_open_ods
System ist Leap 15.5 und qmapshack 1.17.0-lp155.1.4 aus dem Repo: Applications related to the earth. Die etwas neuere Version 1.17.0-lp155.3.1 von Sauerland lässt sich nicht installieren mit der Fehlermeldung: libgdal.so32()(64bit) kann nicht bereit gestellt werden. Installiert ist bei mir die libgdal.so34 Kann jemand helfen.
Ich baue qmapshack gegen die libs aus dem OSS Repo, einzig routino und proj wird noch benötigt. https://download.opensuse.org/repositories/home:/Sauerland:/geo/15.5/ Starte hier...... Du wirst mal wieder ein Mischmasch der Pakete aus verschiedenen Repos installiert haben. Deine fehlende lib ist übrigens vorhanden: https://build.opensuse.org/package/show/Application:Geo/libspatialite Musst du nur installieren. Gruß Stephan
Am Mittwoch, 20. März 2024, 20:02:07 CET schrieb Stephan Hemeier:
Am Mittwoch, 20. März 2024, 18:36:38 CET schrieb Dirk Meier:
Hallo, ich habe festgestellt, dass mein installiertes qmapshack nicht mehr startet, was es bereits oft gemacht hat. Leider kann ich nicht mehr genaus sagen, nach welcher Veränderung dies eingetreten ist. Ich vermute, dass es nach der Installation von Grass war, das ebenfalls nicht startet. Die Fehlermeldung von qmapshack ist: ~> qmapshack qmapshack: symbol lookup error: /usr/lib64/libspatialite.so.8: undefined symbol: fre exl_open_ods
System ist Leap 15.5 und qmapshack 1.17.0-lp155.1.4 aus dem Repo: Applications related to the earth. Die etwas neuere Version 1.17.0-lp155.3.1 von Sauerland lässt sich nicht installieren mit der Fehlermeldung: libgdal.so32()(64bit) kann nicht bereit gestellt werden. Installiert ist bei mir die libgdal.so34 Kann jemand helfen.
Ich baue qmapshack gegen die libs aus dem OSS Repo, einzig routino und proj wird noch benötigt.
https://download.opensuse.org/repositories/home:/Sauerland:/geo/15.5/
Starte hier......
Du wirst mal wieder ein Mischmasch der Pakete aus verschiedenen Repos installiert haben.
Deine fehlende lib ist übrigens vorhanden: https://build.opensuse.org/package/show/Application:Geo/libspatialite Musst du nur installieren.
Gruß Stephan
Hallo Stephan, danke für deine Antwort. Wenn ich die lib von https://build.opensuse.org/package/show/Application:Geo/ libspatialite mit Download package für Leap 15.5 downloaden möchte, erhalte ich die Fehlermeldung: "Keine Anbieter von 'libspatialite' gefunden." -- Gruß Dirk
Am Sonntag, 24. März 2024, 14:58:43 CET schrieb Dirk Meier:
Hallo Stephan, danke für deine Antwort. Wenn ich die lib von https://build.opensuse.org/package/show/Application:Geo/ libspatialite mit Download package für Leap 15.5 downloaden möchte, erhalte ich die Fehlermeldung: "Keine Anbieter von 'libspatialite' gefunden."
Poste deine Repoliste: zypper lr -d
Am Sonntag, 24. März 2024, 16:22:50 CET schrieb Stephan Hemeier:
Am Sonntag, 24. März 2024, 14:58:43 CET schrieb Dirk Meier:
Hallo Stephan, danke für deine Antwort. Wenn ich die lib von https://build.opensuse.org/package/show/Application:Geo/ libspatialite mit Download package für Leap 15.5 downloaden möchte, erhalte ich die Fehlermeldung: "Keine Anbieter von 'libspatialite' gefunden." Poste deine Repoliste: zypper lr -d
~> zypper lr -d # | Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI | Service ---+---------------------------------------------- +--------------------------------------------------------------------------------------------- +---------+-----------+---------+----------+-------- +-------------------------------------------------------------------------- +-------- 1 | Application_Geo | Applications related to the earth (GIS, Mapping, geodesy, GPS, astronomy) (15.5) | Ja | (r ) Ja | Ja | 99 | rpm-md | https://download.opensuse.org/ repositories/Application:/Geo/15.5/ | 2 | ftp.gwdg.de-openSUSE_Leap_$releasever | Packman Repository | Ja | (r ) Ja | Ja | 99 | rpm-md | http://ftp.gwdg.de/pub/ linux/misc/packman/suse/openSUSE_Leap_15.5/ | 3 | home_Sauerland_geo | home:Sauerland:geo (15.5) | Ja | (r ) Ja | Nein | 99 | rpm-md | https:// download.opensuse.org/repositories/home:/Sauerland:/geo/15.5/ | 4 | home_ecsos_Publishing | home:ecsos:Publishing (15.5) | Ja | (r ) Ja | Ja | 99 | rpm-md | https://download.opensuse.org/ repositories/home:/ecsos:/Publishing/15.5/ | 5 | home_ithod_updated | Updated/additional applications (15.5) | Ja | (r ) Ja | Nein | 99 | rpm-md | https://download.opensuse.org/ repositories/home:/ithod:/updated/15.5/ | 6 | openSUSE-Leap-15.5-1 | openSUSE-Leap-15.5-1 | Nein | ---- | ---- | 99 | rpm-md | hd:/?device=/dev/disk/ by-id/usb-Intenso_Ultra_Line-0:0-part2 | 7 | opensuse-guide.org-openSUSE_Leap_$releasever | Libdvdcss Repository | Ja | (r ) Ja | Ja | 99 | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_15.5/ | 8 | packman | packman | Ja | (r ) Ja | Ja | 90 | rpm-md | https://ftp.gwdg.de/pub/ linux/misc/packman/suse/openSUSE_Leap_15.5/ | 9 | repo-backports-debug-update | Update repository with updates for openSUSE Leap debuginfo packages from openSUSE Backports | Nein | ---- | ---- | 99 | N/A | http://download.opensuse.org/ update/leap/15.5/backports_debug/ | 10 | repo-backports-update | Update repository of openSUSE Backports | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/ update/leap/15.5/backports/ | 11 | repo-debug | Debug Repository | Nein | ---- | ---- | 99 | N/A | http:// download.opensuse.org/debug/distribution/leap/15.5/repo/oss/ | 12 | repo-debug-non-oss | Debug Repository (Non-OSS) | Nein | ---- | ---- | 99 | N/A | http:// download.opensuse.org/debug/distribution/leap/15.5/repo/non-oss/ | 13 | repo-debug-update | Update Repository (Debug) | Nein | ---- | ---- | 99 | N/A | http:// download.opensuse.org/debug/update/leap/15.5/oss/ | 14 | repo-debug-update-non-oss | Update Repository (Debug, Non-OSS) | Nein | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/ update/leap/15.5/non-oss/ | 15 | repo-non-oss | Non-OSS Repository | Ja | (r ) Ja | Ja | 99 | rpm-md | http:// download.opensuse.org/distribution/leap/15.5/repo/non-oss/ | 16 | repo-openh264 | Open H.264 Codec (openSUSE Leap) | Ja | (r ) Ja | Ja | 99 | rpm-md | http://codecs.opensuse.org/openh264/ openSUSE_Leap/ | 17 | repo-oss | Main Repository | Ja | (r ) Ja | Ja | 99 | rpm-md | http:// download.opensuse.org/distribution/leap/15.5/repo/oss/ | 18 | repo-sle-debug-update | Update repository with debuginfo for updates from SUSE Linux Enterprise 15 | Nein | ---- | ---- | 99 | N/A | http://download.opensuse.org/ debug/update/leap/15.5/sle/ | 19 | repo-sle-update | Update repository with updates from SUSE Linux Enterprise 15 | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/ update/leap/15.5/sle/ | 20 | repo-source | Source Repository | Nein | ---- | ---- | 99 | N/A | http:// download.opensuse.org/source/distribution/leap/15.5/repo/oss/ | 21 | repo-update | Main Update Repository | Ja | (r ) Ja | Ja | 99 | rpm-md | http:// download.opensuse.org/update/leap/15.5/oss | 22 | repo-update-non-oss | Update Repository (Non- Oss) | Ja | (r ) Ja | Ja | 99 | rpm-md | http://download.opensuse.org/ update/leap/15.5/non-oss/ |
Hast du viel aus dem Geo Repo installiert? Die libtag2 gibt es wirklich nur im multimedia:libs Repo, naja, das Geo und das multimedia:libs Repo ist ja factory...... Wenn du aus dem Geo Repo nicht viel installiert hast, kann ich dir nur den Schwenk auf mein Geo sub-Repo anbietet, da sind nur die Pakete vorhanden, die qmapshack auch braucht. Stephan
Hallo Dirk, kleiner "Nebenkriegsschauplatz" und zu unwichtig für die Liste: Am Sonntag, 24. März 2024, 17:32:14 CET schrieb Dirk Meier:
~> zypper lr -d
Das ist einer der Fälle, in denen der Zeilenumbruch eher schadet als nützt ;-) Auch wenn es nichts mit Deiner Frage zu tun hat - das packman-Repo hast Du doppelt drin (2 und 8), einmal über http und einmal über https (und mit unterschiedlicher Priorität). Eins davon kannst Du löschen. Gruß Christian Boltz -- P.S.: In der kommenden Version sollen die besten Eigenschaften von Windows CE, Me und NT vereinigt werden zu "Windows CEMENT". Wenn das mal nicht'n stabiles OS wird. ;-))))) [Ratti in suse-linux]
participants (3)
-
Christian Boltz
-
Dirk Meier
-
Stephan Hemeier