Ich komme nicht dahinter, warum munin bei manchen Rechnern "sensors" nicht anzeigt. es liegt sicher nicht daran, dass die Rechner dafür zu alt sind. Ich vermute mir fehlen Pakete. Installiert ist: sensors-3.0.3-3.6 sensord-3.0.3-3.6 hddtemp-0.3_beta15-10.pm.2 lm_sensors und hddtemp ist per Runelvel-Editor aktiviert, aber AFAIK hat das mit munin nichts zu tun. Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Al Bogner wrote:
Ich komme nicht dahinter, warum munin bei manchen Rechnern "sensors" nicht anzeigt. es liegt sicher nicht daran, dass die Rechner dafür zu alt sind.
Ich vermute mir fehlen Pakete.
Installiert ist: sensors-3.0.3-3.6 sensord-3.0.3-3.6 hddtemp-0.3_beta15-10.pm.2
lm_sensors und hddtemp ist per Runelvel-Editor aktiviert, aber AFAIK hat das mit munin nichts zu tun.
Im gewissen Sinne doch. Vielleicht ist es am einfachsten, wenn du methodisch vorgehst. (^-^) Prüfe erst einmal, ob im Pluginverzeichnis /etc/munin/plugins/ von dem Rechner auch sensors bzw. ein Link auf /usr/share/munin/plugins/sensors enthalten ist. Wenn nicht, dann kannst du dies nachträglich setzen. -- Sandy Antworten bitte nur in die Mailingliste! PMs bitte an: news-reply2 (@) japantest (.) homelinux (.) com -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Am Freitag 03 April 2009 12:23:59 schrieb Sandy Drobic: Hallo Sandy,
Al Bogner wrote:
Ich komme nicht dahinter, warum munin bei manchen Rechnern "sensors" nicht anzeigt. es liegt sicher nicht daran, dass die Rechner dafür zu alt sind.
Ich vermute mir fehlen Pakete.
Installiert ist: sensors-3.0.3-3.6 sensord-3.0.3-3.6 hddtemp-0.3_beta15-10.pm.2
lm_sensors und hddtemp ist per Runelvel-Editor aktiviert, aber AFAIK hat das mit munin nichts zu tun.
Im gewissen Sinne doch. Vielleicht ist es am einfachsten, wenn du methodisch vorgehst. (^-^)
Gerne, mit deiner Hilfe. Ich habe das deswegen geschrieben, weil am Sempron 2400, wo munin sensors anzeigt, sensord nicht installiert war bzw. lm_sensors nicht aktiviert war.
Prüfe erst einmal, ob im Pluginverzeichnis /etc/munin/plugins/ von dem Rechner auch sensors bzw. ein Link auf /usr/share/munin/plugins/sensors enthalten ist.
Wenn nicht, dann kannst du dies nachträglich setzen.
ls /etc/munin/plugins/ | grep -i sensor Da ist nichts. ls /usr/share/munin/plugins/ | grep -i sensor sensors_ snmp__sensors_fsc_bx_fan snmp__sensors_fsc_bx_temp snmp__sensors_fsc_fan snmp__sensors_fsc_temp snmp__sensors_mbm_fan snmp__sensors_mbm_temp snmp__sensors_mbm_volt Am Sempron 2400, wo munin sensors anzeigt, ist da auch kein Link. sensors_ (mit _) macht mich nachdenklich. Welchen Link soll ich setzen? ln -s /usr/share/munin/plugins/sensors_ /etc/munin/plugins/ ? Das habe ich probiert, hat aber nichts gebracht. ls -1 /etc/munin/plugins/ acpi cpu df df_inode entropy forks if_err_eth0 if_eth0 interrupts iostat irqstats load memory netstat nfs_client open_files open_inodes postfix_mailqueue postfix_mailvolume processes swap vmstat BTW smart-Info gibt es auf keinem Rechner, angeblich soll munin auch smart auswerten können. Die smartmontools sind natürlich installiert. Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Al Bogner wrote:
Am Freitag 03 April 2009 12:23:59 schrieb Sandy Drobic:
Hallo Sandy,
Al Bogner wrote:
Ich komme nicht dahinter, warum munin bei manchen Rechnern "sensors" nicht anzeigt. es liegt sicher nicht daran, dass die Rechner dafür zu alt sind.
Ich vermute mir fehlen Pakete.
Installiert ist: sensors-3.0.3-3.6 sensord-3.0.3-3.6 hddtemp-0.3_beta15-10.pm.2
lm_sensors und hddtemp ist per Runelvel-Editor aktiviert, aber AFAIK hat das mit munin nichts zu tun. Im gewissen Sinne doch. Vielleicht ist es am einfachsten, wenn du methodisch vorgehst. (^-^)
Gerne, mit deiner Hilfe. Ich habe das deswegen geschrieben, weil am Sempron 2400, wo munin sensors anzeigt, sensord nicht installiert war bzw. lm_sensors nicht aktiviert war.
Prüfe erst einmal, ob im Pluginverzeichnis /etc/munin/plugins/ von dem Rechner auch sensors bzw. ein Link auf /usr/share/munin/plugins/sensors enthalten ist.
Wenn nicht, dann kannst du dies nachträglich setzen.
ls /etc/munin/plugins/ | grep -i sensor Da ist nichts.
ls /usr/share/munin/plugins/ | grep -i sensor sensors_ snmp__sensors_fsc_bx_fan snmp__sensors_fsc_bx_temp snmp__sensors_fsc_fan snmp__sensors_fsc_temp snmp__sensors_mbm_fan snmp__sensors_mbm_temp snmp__sensors_mbm_volt
Am Sempron 2400, wo munin sensors anzeigt, ist da auch kein Link.
sensors_ (mit _) macht mich nachdenklich.
Da ich davon ausgehe, dass es sich nicht um einen FSC-Server handelt und du auch kein SNMP-System auf dem Rechner am Laufen hast, solltest du sensors_ verwenden: ln -s /usr/share/munin/plugins/sensors_ /etc/munin/plugins/sensors_ munin-run sensors_ autoconfig munin-run sensors_ Was kommt jetzt als Ausgabe bei dem letzten Befehl? Alles wie gesagt in der Hoffnung, dass sensors_ bei dir auch verwertbare Werte findet. (^-^) -- Sandy Antworten bitte nur in die Mailingliste! PMs bitte an: news-reply2 (@) japantest (.) homelinux (.) com -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Am Freitag 03 April 2009 13:53:12 schrieb Sandy Drobic: Hallo Sandy,
Ich komme nicht dahinter, warum munin bei manchen Rechnern "sensors" nicht anzeigt. es liegt sicher nicht daran, dass die Rechner dafür zu alt sind.
Installiert ist: sensors-3.0.3-3.6 sensord-3.0.3-3.6 hddtemp-0.3_beta15-10.pm.2
ln -s /usr/share/munin/plugins/sensors_ /etc/munin/plugins/sensors_ munin-run sensors_ autoconfig munin-run sensors_
Was kommt jetzt als Ausgabe bei dem letzten Befehl?
ln -s /usr/share/munin/plugins/sensors_ /etc/munin/plugins/sensors_ ln: creating symbolic link `/etc/munin/plugins/sensors_': File exists munin-run sensors_ autoconfig yes munin-run sensors_ plugin must be called as one of sensors_fan sensors_volt sensors_temp munin-run sensors_temp ERROR: Could not execute plugin (plugin doesn't exist?)
Alles wie gesagt in der Hoffnung, dass sensors_ bei dir auch verwertbare Werte findet. (^-^)
Zur Info, es geht zB um diesen Rechner: smolts.org/client/show_all/pub_c0526ec8-0759-44f3-a39b-7c1425772a66 mit einem MSI K9N2 SLI Platinum Ich habe aber auch noch andere Rechner, die zumindest etwas anzeigen sollten. Na ja, irgendwelche Werte kommen mit anderen Tools schon. ;-) Ich wollte schon meine CPU als Kühlschrank patentieren lassen. Gkrellm meinte -2°C. Die GPU wird gerade mit 45°C angezeigt. Also irgendwelche Werte können schon ausgelesen werden. Gkrellm mag zB keine HD-Temperatur anzeigen. hddtemp /dev/sda /dev/sda: WDC WD10EADS-00L5B1: 39°C Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Al Bogner wrote:
Am Freitag 03 April 2009 13:53:12 schrieb Sandy Drobic:
Hallo Sandy,
Ich komme nicht dahinter, warum munin bei manchen Rechnern "sensors" nicht anzeigt. es liegt sicher nicht daran, dass die Rechner dafür zu alt sind.
Installiert ist: sensors-3.0.3-3.6 sensord-3.0.3-3.6 hddtemp-0.3_beta15-10.pm.2
ln -s /usr/share/munin/plugins/sensors_ /etc/munin/plugins/sensors_ munin-run sensors_ autoconfig munin-run sensors_
Was kommt jetzt als Ausgabe bei dem letzten Befehl?
ln -s /usr/share/munin/plugins/sensors_ /etc/munin/plugins/sensors_ ln: creating symbolic link `/etc/munin/plugins/sensors_': File exists
munin-run sensors_ autoconfig yes
munin-run sensors_ plugin must be called as one of sensors_fan sensors_volt sensors_temp
munin-run sensors_temp ERROR: Could not execute plugin (plugin doesn't exist?)
Alles wie gesagt in der Hoffnung, dass sensors_ bei dir auch verwertbare Werte findet. (^-^)
Hier der wichtige Ausschnitt von sensors_: #!/usr/bin/perl -w # -*- perl -*- # Wildcard plugin to monitor sensors. # # Requirements: # - i2c and lm_sensors modules installed and loaded # - sensors program installed and in path Ist dies bei dir der Fall? -- Sandy Antworten bitte nur in die Mailingliste! PMs bitte an: news-reply2 (@) japantest (.) homelinux (.) com -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Am Freitag 03 April 2009 14:42:51 schrieb Sandy Drobic:
Al Bogner wrote:
Am Freitag 03 April 2009 13:53:12 schrieb Sandy Drobic:
Hallo Sandy,
Ich komme nicht dahinter, warum munin bei manchen Rechnern "sensors" nicht anzeigt. es liegt sicher nicht daran, dass die Rechner dafür zu alt sind.
Installiert ist: sensors-3.0.3-3.6 sensord-3.0.3-3.6 hddtemp-0.3_beta15-10.pm.2
ln -s /usr/share/munin/plugins/sensors_ /etc/munin/plugins/sensors_ munin-run sensors_ autoconfig munin-run sensors_
Was kommt jetzt als Ausgabe bei dem letzten Befehl?
ln -s /usr/share/munin/plugins/sensors_ /etc/munin/plugins/sensors_ ln: creating symbolic link `/etc/munin/plugins/sensors_': File exists
munin-run sensors_ autoconfig yes
munin-run sensors_ plugin must be called as one of sensors_fan sensors_volt sensors_temp
munin-run sensors_temp ERROR: Could not execute plugin (plugin doesn't exist?)
Alles wie gesagt in der Hoffnung, dass sensors_ bei dir auch verwertbare Werte findet. (^-^)
Hier der wichtige Ausschnitt von sensors_:
#!/usr/bin/perl -w # -*- perl -*- # Wildcard plugin to monitor sensors. # # Requirements: # - i2c and lm_sensors modules installed and loaded # - sensors program installed and in path
Ist dies bei dir der Fall?
cat /usr/share/munin/plugins/sensors_ #!/usr/bin/perl -w # -*- perl -*- # Wildcard plugin to monitor sensors. # # Requirements: # - i2c and lm_sensors modules installed and loaded # - sensors program installed and in path Ist ident, ich verstehe aber nicht, was an einem Kommentar wichtig ist Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
# Requirements: # - i2c and lm_sensors modules installed and loaded # - sensors program installed and in path
Ist ident, ich verstehe aber nicht, was an einem Kommentar wichtig ist
Mensch Al! Da steht doch ganz ausdrücklich, was das Plugin als Voraussetzung erwartet!! Sind diese Voraussetzungen erfüllt oder nicht? -- Sandy Antworten bitte nur in die Mailingliste! PMs bitte an: news-reply2 (@) japantest (.) homelinux (.) com -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Am Freitag 03 April 2009 17:31:52 schrieb Sandy Drobic:
# Requirements: # - i2c and lm_sensors modules installed and loaded # - sensors program installed and in path
Ist ident, ich verstehe aber nicht, was an einem Kommentar wichtig ist
Mensch Al! Da steht doch ganz ausdrücklich, was das Plugin als Voraussetzung erwartet!! Sind diese Voraussetzungen erfüllt oder nicht?
Sorry, ich habe mich nebenan ja auch schon entschuldigt. Meine Aufmerksamkeit galt noch anderen Dingen bei diesem (neuen) Rechner und habe ich etwas schräg gedacht. Ein lsmod zeigt: i2c_core 35200 1 nvidia Ich vergleiche immer mit dem Rechner bei dem es funktioniert. Da finde ich: i2c_core 29916 2 i2c_viapro,nvidia Mir ist aber nicht klar, ob ich i2c-tools brauche. Jedenfalls ist es am Rechner wo sensors angezeigt wird, nicht installiert und wo es nicht funktioniert, habe ich es einfach mal installiert. Brachte aber nichts. Ist i2c nicht ein Kernel-Feature, dass man normalerweise annehmen kann? Ich verwende 2.6.27.19-3.2-default, wo es nicht funktioniert und 2.6.27.19-3.2-pae wo es funktioniert. rpm -q sensors sensors-3.0.3-3.6 ist also installiert Und sollte auch im Pfad sein: which sensors /usr/bin/sensors Ich habe /etc/init.d/lm_sensors /etc/init.d/rc2.d/K01lm_sensors /etc/init.d/rc2.d/S07lm_sensors /etc/init.d/rc3.d/K01lm_sensors /etc/init.d/rc3.d/S07lm_sensors /etc/init.d/rc5.d/K01lm_sensors /etc/init.d/rc5.d/S07lm_sensors /etc/sensors.conf /etc/sensors3.conf Wie nebenan geschrieben, # /etc/init.d/lm_sensors stop Shutting down sensors: done # /etc/init.d/lm_sensors start Starting up sensors: done Da sehe ich auch nichts auffälliges. Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo,
Am Fre, 03 Apr 2009, Al Bogner schrieb:
[..]
Konfiguriere sensors mal (sensors-detect), das spuckt dir die nötigen
Module aus.
Bei mir mit nforce 570 spuckt sensors-detect aus:
Busdriver 'i2c-nforce2'
Driver: w83627ehf
Driver: k8temp
==== /etc/sysconfig/lm_sensors ====
MODULE_0=i2c-nforce2
MODULE_1=eeprom
MODULE_2=w83627ehf
MODULE_3=k8temp
====
eeprom hab ich selber noch eingefügt.
==== lsmod ====
w83627ehf 19428 0
hwmon_vid 2528 1 w83627ehf
eeprom 5592 0
powernow_k8 12552 1
i2c_nforce2 7000 0
k8temp 4000 0
i2c_core 29916 3 eeprom,nvidia,i2c_nforce2
thermal 19984 0
processor 43152 2 powernow_k8,thermal
thermal_sys 11364 3 fan,thermal,processor
hwmon 2916 3 w83627ehf,k8temp,thermal_sys
=====
Bei dir dürfte i2c-nforce2 oder i2c-amd756 zuständig sein, welches
Modul statt w83627ehf dran ist sollte sensors-detect herausfinden.
HTH,
-dnh
--
"Ja, aber Popcorn over IP (PoIP) ist noch nicht so ganz ausgereift. Ich
habe schon versucht, das mit RFC1149 zu koppeln, aber die blöden Viecher
fressen die Popcorn immer selber :-("
-- Peter J. Holzer [ais]
Am Freitag 03 April 2009 20:28:53 schrieb David Haller: Hallo David,
Konfiguriere sensors mal (sensors-detect), das spuckt dir die nötigen Module aus.
Bei mir mit nforce 570 spuckt sensors-detect aus:
Busdriver 'i2c-nforce2' Driver: w83627ehf Driver: k8temp
==== /etc/sysconfig/lm_sensors ==== MODULE_0=i2c-nforce2 MODULE_1=eeprom MODULE_2=w83627ehf MODULE_3=k8temp ====
Driver `f71882fg' (should be inserted): Detects correctly: * ISA bus, address 0xa00 Chip `Fintek F71882FG/F71883FG Super IO Sensors' (confidence: 9) Driver `k8temp' (should be inserted): Detects correctly: * Chip `AMD K8 thermal sensors' (confidence: 9) #----cut here---- # Chip drivers modprobe f71882fg modprobe k8temp /usr/bin/sensors -s #----cut here----
eeprom hab ich selber noch eingefügt.
==== lsmod ==== w83627ehf 19428 0 hwmon_vid 2528 1 w83627ehf eeprom 5592 0 powernow_k8 12552 1 i2c_nforce2 7000 0 k8temp 4000 0 i2c_core 29916 3 eeprom,nvidia,i2c_nforce2 thermal 19984 0 processor 43152 2 powernow_k8,thermal thermal_sys 11364 3 fan,thermal,processor hwmon 2916 3 w83627ehf,k8temp,thermal_sys =====
lsmod | sort Module Size Used by ahci 34468 8 amd74xx 7152 0 ata_generic 6044 0 binfmt_misc 10068 1 button 8328 0 cdrom 36200 1 sr_mod cpufreq_conservative 8384 0 cpufreq_powersave 2248 0 cpufreq_userspace 4204 0 crc_t10dif 2152 1 sd_mod dm_mod 73904 0 dock 14164 1 libata edd 10272 0 ehci_hcd 54004 0 ext3 140776 1 f71882fg 12260 0 fan 6016 0 ff_memless 8752 1 usbhid floppy 62952 0 forcedeth 56440 0 fuse 57840 3 hid 41216 1 usbhid hwmon 3720 3 f71882fg,k8temp,thermal_sys i2c_core 35200 1 nvidia ide_core 115068 2 ide_pci_generic,amd74xx ide_pci_generic 4652 0 ieee1394 98528 1 ohci1394 ipv6 292168 39 jbd 61736 1 ext3 k8temp 5160 0 libata 183232 4 ata_generic,pata_jmicron,ahci,pata_amd lockd 71536 1 nfs loop 17268 0 mbcache 9484 1 ext3 nfs 288384 7 nfs_acl 3480 1 nfs nvidia 8148328 36 ohci1394 31380 0 ohci_hcd 35284 0 pata_amd 13692 0 pata_jmicron 4104 0 pci_hotplug 31864 1 shpchp pcspkr 3064 0 powernow_k8 14236 1 processor 49088 2 powernow_k8,thermal rtc_cmos 13000 0 rtc_core 21396 1 rtc_cmos rtc_lib 3560 1 rtc_core scsi_mod 178280 5 sr_mod,usb_storage,sg,sd_mod,libata sd_mod 35272 9 sg 35376 0 shpchp 32244 0 snd 73560 21 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_usb_audio,snd_usb_lib,snd_hda_intel,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer,snd_hwdep snd_hda_intel 547700 3 snd_hwdep 9072 2 snd_usb_audio,snd_hda_intel snd_mixer_oss 16808 1 snd_pcm_oss snd_page_alloc 9816 2 snd_hda_intel,snd_pcm snd_pcm 91856 3 snd_pcm_oss,snd_usb_audio,snd_hda_intel snd_pcm_oss 48496 0 snd_rawmidi 25792 1 snd_usb_lib snd_seq 61504 0 snd_seq_device 8604 2 snd_seq,snd_rawmidi snd_timer 24968 2 snd_seq,snd_pcm snd_usb_audio 97760 2 snd_usb_lib 18488 1 snd_usb_audio soundcore 8368 1 snd sr_mod 15940 0 sunrpc 213768 23 nfs,lockd,nfs_acl thermal 24392 0 thermal_sys 14336 3 fan,thermal,processor usb_storage 105504 0 usbcore 195904 7 snd_usb_audio,snd_usb_lib,usb_storage,usbhid,ohci_hcd,ehci_hcd usbhid 52512 0 wmi 8160 0 xfs 540576 6
Bei dir dürfte i2c-nforce2 oder i2c-amd756 zuständig sein, welches Modul statt w83627ehf dran ist sollte sensors-detect herausfinden.
HTH
Bis jetzt sehe ich noch nichts. Auch beim XP2700 nicht: Driver `w83627hf' (should be inserted): Detects correctly: * ISA bus, address 0x290 Chip `Winbond W83697HF/F/HG Super IO Sensors' (confidence: 9) #----cut here---- # Chip drivers modprobe w83627hf /usr/bin/sensors -s #----cut here---- Am Sempron 2400 (wo sensors angezeigt wird): Driver `w83627hf' (should be inserted): Detects correctly: * ISA bus, address 0x290 Chip `Winbond W83697HF/F/HG Super IO Sensors' (confidence: 9) Da ist also kein w83627hf aktiv und sensors wird angezeigt. Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo, Am Fre, 03 Apr 2009, Al Bogner schrieb:
Am Freitag 03 April 2009 20:28:53 schrieb David Haller:
==== /etc/sysconfig/lm_sensors ==== MODULE_0=i2c-nforce2 MODULE_1=eeprom MODULE_2=w83627ehf MODULE_3=k8temp ====
Driver `f71882fg' (should be inserted): Detects correctly: * ISA bus, address 0xa00 Chip `Fintek F71882FG/F71883FG Super IO Sensors' (confidence: 9)
Driver `k8temp' (should be inserted): Detects correctly: * Chip `AMD K8 thermal sensors' (confidence: 9)
Nix mit i2c- (außer -core)? Denn das Modul ist für den I2C Bus zuständig, d.h. für die Kommunikation über den I2C Bus, und über den werden die Sensoren ausgelesen. Deine /etc/sysconfig/lm_sensors sollte wohl so aussehen: MODULE_0=i2c-amd756 ## geraten MODULE_1=eeprom MODULE_2=f71882fg MODULE_3=k8temp Denn das i2c_ Modul vermisse ich bei deinem lsmod:
lsmod | sort [..] hwmon 3720 3 f71882fg,k8temp,thermal_sys i2c_core 35200 1 nvidia [..]
Bei dir dürfte i2c-nforce2 oder i2c-amd756 zuständig sein, welches Modul statt w83627ehf dran ist sollte sensors-detect herausfinden.
HTH, -dnh --
Ich wusste, warum ich plonke *g* -- M. Houdek Stimmt: Es macht das Leben ruhiger, wenn man den ersten Ärger über solche Postings anderen überlassen kann... ;-) -- M. Höhne -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Am Freitag 03 April 2009 23:25:44 schrieb David Haller: Hallo David,
Am Fre, 03 Apr 2009, Al Bogner schrieb:
Am Freitag 03 April 2009 20:28:53 schrieb David Haller:
==== /etc/sysconfig/lm_sensors ==== MODULE_0=i2c-nforce2 MODULE_1=eeprom MODULE_2=w83627ehf MODULE_3=k8temp ====
Driver `f71882fg' (should be inserted): Detects correctly: * ISA bus, address 0xa00 Chip `Fintek F71882FG/F71883FG Super IO Sensors' (confidence: 9)
Driver `k8temp' (should be inserted): Detects correctly: * Chip `AMD K8 thermal sensors' (confidence: 9)
Nix mit i2c- (außer -core)? Denn das Modul ist für den I2C Bus zuständig, d.h. für die Kommunikation über den I2C Bus, und über den werden die Sensoren ausgelesen.
Deine /etc/sysconfig/lm_sensors sollte wohl so aussehen:
MODULE_0=i2c-amd756 ## geraten MODULE_1=eeprom MODULE_2=f71882fg MODULE_3=k8temp
Denn das i2c_ Modul vermisse ich bei deinem lsmod:
lsmod | sort
[..]
hwmon 3720 3 f71882fg,k8temp,thermal_sys i2c_core 35200 1 nvidia
[..]
Bei dir dürfte i2c-nforce2 oder i2c-amd756 zuständig sein, welches Modul statt w83627ehf dran ist sollte sensors-detect herausfinden.
Lsmod am Rechner, bei dem mit Munin Sensors angezeigt wird, siehe unten: Da gibt es also ein i2c_viapro, das sich auch bei anderem XP2400+ findet, wo sensors angezeigt wird. /etc/sysconfig/lm_sensors MODULE_0=w83627hf Das steht erst darin, seitdem ich sensors-detect aufgerufen habe. Sollte ich einfach mal in /etc/sysconfig/lm_sensors deinen Vorschlag dazu schreiben, wo es nicht funktioniert? Kann ich mit falschen Modulen in lm_sensors was kaputt machen? Ich vermute munin aktiviert die Module irgendwie anders, da i2c_viapro ja nicht in lm_sensors angeführt ist. lsmod | sort 8139cp 18828 0 8139too 22484 0 ac97_bus 1584 1 snd_ac97_codec af_packet 16412 0 agpgart 32308 2 nvidia,via_agp ata_generic 4484 0 binfmt_misc 7732 1 button 6568 0 cdrom 32288 2 ide_cd_mod,sr_mod crc_t10dif 1704 1 sd_mod dm_mod 62540 0 dock 11804 1 libata edd 8616 0 ehci_hcd 47420 0 fan 4712 0 fat 45792 1 vfat floppy 52764 0 fuse 50596 3 gameport 10800 1 snd_via82xx hwmon 2916 2 w83627hf,thermal_sys hwmon_vid 2528 1 w83627hf i2c_core 29916 2 i2c_viapro,nvidia i2c_viapro 7684 0 ide_cd_mod 29140 0 ide_core 97492 4 ide_disk,ide_cd_mod,ide_pci_generic,via82cxxx ide_disk 12884 0 ide_pci_generic 3428 0 ipv6 241840 33 joydev 8944 0 libata 160776 3 ata_generic,sata_via,pata_via lockd 61376 1 nfs loop 14612 0 lp 8644 0 mii 4968 2 8139too,8139cp Module Size Used by nfs 251452 7 nfs_acl 2848 1 nfs nls_cp437 5432 2 nls_iso8859_1 3768 2 nvidia 7093824 24 parport 33128 3 lp,parport_pc,ppdev parport_pc 34912 1 pata_via 7768 7 pci_hotplug 27392 1 shpchp pcspkr 2344 0 ppdev 6876 0 processor 43656 2 thermal reiserfs 215408 1 rtc_cmos 10896 0 rtc_core 17384 1 rtc_cmos rtc_lib 2816 1 rtc_core sata_via 9080 0 scsi_mod 149336 8 st,usb_storage,sr_mod,sg,sd_mod,libata,sym53c8xx,scsi_transport_spi scsi_transport_spi 21724 1 sym53c8xx sd_mod 31604 8 sg 29408 0 shpchp 28308 0 snd 56784 16 snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_seq,snd_via82xx,snd_ice1712,snd_ice17xx_ak4xxx,snd_ak4xxx_adda,snd_cs8427,snd_ac97_codec,snd_pcm,snd_timer,snd_i2c,snd_mpu401_uart,snd_rawmidi,snd_seq_device snd_ac97_codec 99756 2 snd_via82xx,snd_ice1712 snd_ak4xxx_adda 8032 2 snd_ice1712,snd_ice17xx_ak4xxx snd_cs8427 8152 1 snd_ice1712 snd_i2c 5388 2 snd_ice1712,snd_cs8427 snd_ice1712 56840 0 snd_ice17xx_ak4xxx 3544 1 snd_ice1712 snd_mixer_oss 14288 1 snd_pcm_oss snd_mpu401_uart 7172 2 snd_via82xx,snd_ice1712 snd_page_alloc 8184 2 snd_via82xx,snd_pcm snd_pcm 76904 4 snd_pcm_oss,snd_via82xx,snd_ice1712,snd_ac97_codec snd_pcm_oss 43040 0 snd_rawmidi 21300 2 snd_seq_midi,snd_mpu401_uart snd_seq 51916 2 snd_seq_midi,snd_seq_midi_event snd_seq_device 7168 3 snd_seq_midi,snd_seq,snd_rawmidi snd_seq_midi 7036 0 snd_seq_midi_event 6676 1 snd_seq_midi snd_timer 20204 2 snd_seq,snd_pcm snd_via82xx 23588 0 soundcore 6660 1 snd sr_mod 13360 0 st 34192 0 sunrpc 182568 23 nfs,lockd,nfs_acl sym53c8xx 69528 0 thermal 19984 0 thermal_sys 11364 3 fan,thermal,processor uhci_hcd 23080 0 usbcore 165932 4 usb_storage,ehci_hcd,uhci_hcd usb_storage 89980 0 vfat 9676 2 via82cxxx 5776 0 via_agp 7932 1 w83627hf 24516 0 xfs 527820 2 -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
participants (3)
-
Al Bogner
-
David Haller
-
Sandy Drobic