Am Sonntag, den 18.02.2007, 18:42 +0100 schrieb Bernhard Walle:

* Dirk Förster [2007-02-18 14:29]:

...

habe mit dem Dateimanager und YaST die Datei quickcam-kmp-default installieren wollen.

Was sagt:

# rpm -Uvh kmp-quickcam-default....

Und, was sagt:

# rpm -qf /boot/vmlinuz-*

Gruß, Bernhard

Hallo Bernhard, Habe openSUSE 10.2 (X86_64). Bei: rpm -Uvh quickcam-kmp-default-0.6.6_2.6.20_2-2.x86_64.rpm Kommt: error: Failed dependencies: kernel(vmlinux) = c44f15c620d08d74 is needed by quickcam-kmp-default-0.6.6_2.6.20_2-2.x86_64 kernel(drivers_usb_core) = ed32221bd045957e is needed by quickcam-kmp-default-0.6.6_2.6.20_2-2.x86_64 kernel(drivers_media_video) = debb3626623c7e6c is needed by quickcam-kmp-default-0.6.6_2.6.20_2-2.x86_64 Und bei: rpm -qf /boot/vmlinuz-* Kommt: kernel-default-2.6.18.2-34 Viele Grüße, Dirk -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org

Am Sonntag, den 18.02.2007, 21:57 +0100 schrieb Bernhard Walle:

* Dirk Förster [2007-02-18 20:32]:

...

Habe openSUSE 10.2 (X86_64).

Eben. Und warum willst du dann unbedingt das Kernelmodul für Factory installieren? Das wird eben nicht gehen. Nimm

http://download.opensuse.org/distribution/10.2/repo/oss/suse/x86_64/quickcam...

Gruß, Bernhard

Hallo Bernhard, danke für deine Hilfe! Keine Ahnung, was ein Factory Kernelmodul ist. Auf der Website war das die einzige x86_64 Datei. Wie wechsele ich in der Kommandozeile den Dateiordner? Bin immer über MC gegangen. Das geht doch sicher auch anders. Habe die Datei installiert. Nur, Ekiga 2.0.3 kann das Gerät nicht finden. Woran liegt das jetzt? Viele Grüße, Dirk -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org

Am Montag, den 19.02.2007, 14:58 +0100 schrieb Bernhard Walle:

Hello,

* Dirk Förster [2007-02-19 14:53]:

...

danke für deine Hilfe!

Keine Ahnung, was ein Factory Kernelmodul ist. Auf der Website war das die einzige x86_64 Datei.

Factory ist einfach eine andere Version als 10.2 (halt der Entwicklungszweig). Kernelmodule müssen immer zu der Version des Kernels passen.

...

Wie wechsele ich in der Kommandozeile den Dateiordner? Bin immer über MC gegangen. Das geht doch sicher auch anders.

cd <verzeichnis>

...

Habe die Datei installiert.

Nur, Ekiga 2.0.3 kann das Gerät nicht finden. Woran liegt das jetzt?

Ist das Modul geladen? Was sagt 'lsmod' und 'dmesg' nachdem du die Kamera eingesteckt hast. Also vorher rausziehen und wieder einstecken.

Gruß, Bernhard

Hallo Bernhard, danke für die Antworten! Habe die Kamera raus- und dann wieder eingesteckt. Danach habe ich lsmod aufgerufen: Module Size Used by fglrx 617120 19 ipt_LOG 23808 3 xt_limit 20224 3 ppp_generic 47904 0 slhc 24064 1 ppp_generic af_packet 57356 2 cpufreq_conservative 25608 0 cpufreq_ondemand 24592 1 cpufreq_userspace 24064 0 cpufreq_powersave 18688 0 powernow_k8 32416 0 freq_table 22912 1 powernow_k8 snd_pcm_oss 71680 0 snd_mixer_oss 35840 1 snd_pcm_oss snd_seq 82976 0 snd_seq_device 26516 1 snd_seq button 24736 0 battery 28168 0 ac 22792 0 ip6t_REJECT 22528 3 xt_tcpudp 20352 1 ipt_REJECT 22528 3 xt_state 19200 2 iptable_mangle 19840 0 iptable_nat 24964 0 ip_nat 37804 1 iptable_nat iptable_filter 19968 1 ip6table_mangle 19456 0 ip_conntrack 78372 3 xt_state,iptable_nat,ip_nat nfnetlink 24648 2 ip_nat,ip_conntrack ip_tables 39400 3 iptable_mangle,iptable_nat,iptable_filter ip6table_filter 19840 1 ip6_tables 33352 2 ip6table_mangle,ip6table_filter x_tables 37384 9 ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables ipv6 357728 17 ip6t_REJECT loop_fish2 27648 1 uhci_hcd 42520 0 apparmor 74264 0 aamatch_pcre 31232 1 apparmor nls_utf8 18944 1 ntfs 209032 1 loop 34064 3 loop_fish2 dm_mod 81872 0 usblp 32128 0 usbhid 69792 0 pcmcia 58648 0 firmware_class 28288 1 pcmcia ide_cd 59680 0 cdrom 54056 1 ide_cd sis900 43136 0 mii 22912 1 sis900 yenta_socket 45836 2 rsrc_nonstatic 29824 1 yenta_socket pcmcia_core 61988 3 pcmcia,yenta_socket,rsrc_nonstatic ehci_hcd 51080 0 ohci1394 52040 0 ieee1394 130552 1 ohci1394 ohci_hcd 38404 0 i2c_sis96x 23172 0 usbcore 148064 5 uhci_hcd,usblp,usbhid,ehci_hcd,ohci_hcd shpchp 56492 0 i2c_core 41472 1 i2c_sis96x pci_hotplug 52228 1 shpchp parport_pc 58984 1 lp 30664 0 parport 59660 2 parport_pc,lp snd_intel8x0 54440 1 snd_ac97_codec 127832 1 snd_intel8x0 snd_ac97_bus 19456 1 snd_ac97_codec snd_pcm 115464 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec snd_timer 44680 2 snd_seq,snd_pcm snd 89384 10 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer soundcore 28192 1 snd snd_page_alloc 27792 2 snd_intel8x0,snd_pcm reiserfs 260096 2 edd 27912 0 fan 22408 0 sis5513 31248 0 [permanent] thermal 33552 0 processor 53992 2 powernow_k8,thermal ide_disk 34304 5 ide_core 174720 3 ide_cd,sis5513,ide_disk Bei dmesg kommt: Bootdata ok (command line is root=/dev/hda3 vga=0x317 resume=/dev/hda2 splash=silent) Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001ffdf000 (ACPI data) BIOS-e820: 000000001ffdf000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f7970 ACPI: RSDT (v001 A M I OEMRSDT 0x09000402 MSFT 0x00000097) @ 0x000000001ffd0000 ACPI: FADT (v002 A M I OEMFACP 0x09000402 MSFT 0x00000097) @ 0x000000001ffd0200 ACPI: MADT (v001 A M I OEMAPIC 0x09000402 MSFT 0x00000097) @ 0x000000001ffd0390 ACPI: OEMB (v001 A M I AMI_OEM 0x09000402 MSFT 0x00000097) @ 0x000000001ffdf040 ACPI: DSDT (v001 UW F06_____ 0x00000000 INTL 0x02002026) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000001ffd0000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000001ffd0000 On node 0 totalpages: 128087 DMA zone: 2894 pages, LIFO batch:0 DMA32 zone: 125193 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ10 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) SMP: Allowing 1 CPUs, 0 hotplug CPUs Built 1 zonelists. Total pages: 128087 Kernel command line: root=/dev/hda3 vga=0x317 resume=/dev/hda2 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 798.250 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Checking aperture... CPU 0: aperture @ e0000000 size 128 MB Memory: 508152k/524096k available (1915k kernel code, 15556k reserved, 1278k data, 188k init) Calibrating delay using timer specific routine.. 1597.65 BogoMIPS (lpj=3195302) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code Freeing SMP alternatives: 28k freed checking if image is initramfs... it is Freeing initrd memory: 3323k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12472670 Detected 12.472 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS963 that hid as a SIS503 (compatible=0) Enabling SiS 96x SMBus. Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 11) interrupt mode. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 128M @ 0xe0000000 PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: fea00000-feafffff PREFETCH window: ee900000-fe8fffff PCI: Bus 2, cardbus bridge: 0000:00:09.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Bus 6, cardbus bridge: 0000:00:09.1 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 34000000-35ffffff MEM window: 36000000-37ffffff GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 17 (level, low) -> IRQ 169 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1171896031.916:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xf0000000, mapped to 0xffffc20000100000, using 6144k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=84 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177 ACPI: PCI interrupt for device 0000:00:02.6 disabled RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize i8042.c: Detected active multiplexing controller, rev 1.0. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input2 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 188k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [THRM] (75 C) SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: FUJITSU MHT2060AT, ATA DISK drive Losing some ticks... checking if CPU frequency changed. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 Probing IDE interface ide1... hdc: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Attempting manual resume ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode reiserfs: using flush barriers ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177 intel8x0_measure_ac97_clock: measured 55270 usecs intel8x0: clocking to 48000 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new driver usbfs usbcore: registered new driver hub sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 185 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 185, io mem 0xfebfd000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd usb usb1: SerialNumber: 0000:00:03.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 193 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 193, io mem 0xfebfe000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd usb usb2: SerialNumber: 0000:00:03.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ieee1394: Initialized config rom entry `ip1394' usb 1-1: new full speed USB device using ohci_hcd and address 2 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 201 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[febfb800-febfbfff] Max Packet=[2048] IR/IT contexts=[4/8] GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 209 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: irq 209, io mem 0xfebff000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb3: SerialNumber: 0000:00:03.3 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected Yenta: CardBus bridge found at 0000:00:09.0 [1734:105f] Yenta O2: res at 0x94/0xD4: 00/ea Yenta O2: enabling read prefetch/write burst Yenta: ISA IRQ mask 0x0ab8, PCI irq 169 Socket status: 30000006 Yenta: CardBus bridge found at 0000:00:09.1 [1734:105f] usb 1-1: device not accepting address 2, error -110 Yenta: ISA IRQ mask 0x0ab8, PCI irq 169 Socket status: 30000006 sis900.c: v1.08.10 Apr. 2 2006 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 201 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 201, 00:03:0d:18:12:2e. hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d532581bb23] usb 1-1: new full speed USB device using ohci_hcd and address 4 usb 1-1: new device found, idVendor=046d, idProduct=092c usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Camera usb 1-1: Manufacturer: usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new low speed USB device using ohci_hcd and address 5 usb 1-2: new device found, idVendor=046d, idProduct=c03d usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: USB-PS/2 Optical Mouse usb 1-2: Manufacturer: Logitech usb 1-2: configuration #1 chosen from 1 choice ohci_hcd 0000:00:03.1: wakeup usb 2-1: new full speed USB device using ohci_hcd and address 2 usb 2-1: new device found, idVendor=03f0, idProduct=4c11 usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: PSC 1500 series usb 2-1: Manufacturer: HP usb 2-1: SerialNumber: MY5AID254W04M2 usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4C11 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Adding 1015552k swap on /dev/hda2. Priority:42 extents:1 across:1015552k device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com loop: loaded (max 8 devices) NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs warning (device hda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows. AppArmor: AppArmor initialized audit(1171896054.085:2): AppArmor initialized bootsplash: status on console 0 changed to on USB Universal Host Controller Interface driver v3.0 loop: registered Twofish encryption ReiserFS: loop0: found reiserfs format "3.6" with standard journal ReiserFS: loop0: using ordered data mode reiserfs: using flush barriers ReiserFS: loop0: journal params: device loop0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: loop0: checking transaction log (loop0) ReiserFS: loop0: Using r5 hash to sort names ReiserFS: loop0: found reiserfs format "3.6" with standard journal ReiserFS: loop0: using ordered data mode reiserfs: using flush barriers ReiserFS: loop0: journal params: device loop0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: loop0: checking transaction log (loop0) ReiserFS: loop0: Using r5 hash to sort names bootsplash: status on console 0 changed to on NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (2047 buckets, 16376 max) - 288 bytes per conntrack ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWRB] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) ACPI: Invalid package argument ACPI Exception (acpi_processor-0270): AE_BAD_PARAMETER, Invalid _PSS data [20060707] powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x12 powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x6 powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x2 NET: Registered protocol family 17 eth0: Media Link On 100mbps full-duplex eth0: no IPv6 routers present audit(1171892518.367:3): audit_backlog_limit=256 old=64 by auid=4294967295 audit(1171892518.411:4): audit_pid=4083 old=0 by auid=4294967295 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 bootsplash: status on console 0 changed to on SFW2-IN-ILL-TARGET IN=eth0 OUT= MAC= SRC=192.168.178.20 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes. [fglrx] module loaded - fglrx 8.32.5 [Dec 12 2006] on minor 0 GSI 22 sharing vector 0xD9 and IRQ 22 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 217 [fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes. [fglrx] AGP detected, AgpState = 0x1f004e0b (hardware caps of chipset) agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [fglrx] AGP enabled, AgpCommand = 0x1f004302 (selected caps) [fglrx] total GART = 134217728 [fglrx] free GART = 118222848 [fglrx] max single GART = 118222848 [fglrx] total LFB = 134217728 [fglrx] free LFB = 119828480 [fglrx] max single LFB = 119828480 [fglrx] total Inv = 0 [fglrx] free Inv = 0 [fglrx] max single Inv = 0 [fglrx] total TIM = 0 SFW2-IN-ILL-TARGET IN=eth0 OUT= MAC= SRC=192.168.178.20 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 SFW2-IN-ILL-TARGET IN=eth0 OUT= MAC= SRC=192.168.178.20 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56593 DF PROTO=TCP SPT=7267 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A00000C8B6487A220) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56594 DF PROTO=TCP SPT=7267 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A00000CCD6487A220) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56595 DF PROTO=TCP SPT=7267 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A00000D516487A220) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56596 DF PROTO=TCP SPT=7267 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A00000E596487A220) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56597 DF PROTO=TCP SPT=7267 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A000010696487A220) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56600 DF PROTO=TCP SPT=7267 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A00002D496487A220) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56601 DF PROTO=TCP SPT=7267 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A00004E496487A220) psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: issuing reconnect request drivers/usb/class/usblp.c: usblp0: removed SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47154 DF PROTO=TCP SPT=22271 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C007D648C6D28) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47155 DF PROTO=TCP SPT=22271 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C00C1648C6D28) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47156 DF PROTO=TCP SPT=22271 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C0149648C6D28) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47157 DF PROTO=TCP SPT=22271 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C0259648C6D28) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47158 DF PROTO=TCP SPT=22271 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C0479648C6D28) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47161 DF PROTO=TCP SPT=22271 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C2239648C6D28) SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.20 DST=195.135.220.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47162 DF PROTO=TCP SPT=22271 DPT=80 WINDOW=216 RES=0x00 ACK FIN URGP=0 OPT (0101080A000C4439648C6D28) usb 1-1: USB disconnect, address 4 usb 1-1: new full speed USB device using ohci_hcd and address 6 usb 1-1: new device found, idVendor=046d, idProduct=092c usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Camera usb 1-1: Manufacturer: usb 1-1: configuration #1 chosen from 1 choice Viele Grüße, Dirk -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org

Am Dienstag, den 20.02.2007, 02:02 +0100 schrieb Bernhard Walle:

* Dirk Förster [2007-02-19 16:54]:

...

usb 1-1: USB disconnect, address 4 usb 1-1: new full speed USB device using ohci_hcd and address 6 usb 1-1: new device found, idVendor=046d, idProduct=092c usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Camera usb 1-1: Manufacturer: usb 1-1: configuration #1 chosen from 1 choice

Der Treiber unterstützt die Kamera nicht. Installiere http://software.opensuse.org/download/drivers:/webcam/openSUSE_10.2/x86_64/s....

Gruß, Bernhard

Hallo Bernhard, danke, hat geklappt! Kamera läuft mit Ekiga. Aus der Ekiga Anleitung bin ich nicht ganz schlau geworden. Kann ich mit Ekiga auch jemand bei MSN oder Skype anrufen? Funktioniert das nur mit SIP? Und was ist dann H.323? Wo kann ich zwischen Chinch-Headset und internem Lautsprecher/Mikro umschalten? Viele Grüße, Dirk -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org