Hallo Linux-Gemeinde, ich arbeite hier zu Hause in meinem Homenetzwerk momentan leider noch mit Suse 9.1, möchte aber umstellen auf Suse 9.2. Somit versuche ich schon seit geraumer Zeit auf meinem stationärem Rechner diese neue Version 9.2 fehlerfrei zu installieren. Das Problem: Der statonäre Rechner (9.2) ist im Netzwerk nicht als nfs-Server sichtbar, aber nutzbar! Jedesmal, wenn ich versuche mit dem nfs-Client des Notebooks freigegebene Verzeichnisse zu installieren, kann der nfs-Bowser diesen rechner nicht finden. Gebe ich jedoch manuell die IP-Adresse des stationären Rechners ein, kann ich aus den freigegebenen Verzeichnissen auswählen und diese mounten. Die Firewall ist dabei deaktiviert. Ist auf beiden Rechnern Suse 9.1 installiert besteht das Problem nicht. Ist auf beiden Rechnern Suse 9.2 installiert besteht auf beiden Rechnern das Problem. Ich lasse mir kontinuierlich die die Mails dieses Forums senden, offenbar wurde dieses Phänomen noch von keinem beobachtet, beanstandet, registriert. Was mache ich da falsch? Gruß Pfeffer
Hallo pfeffer, On Sunday 06 March 2005 15:21, pfeffer wrote:
Hallo Linux-Gemeinde,
[snip]
Das Problem: Der statonäre Rechner (9.2) ist im Netzwerk nicht als nfs-Server sichtbar, aber nutzbar! Jedesmal, wenn ich versuche mit dem nfs-Client des Notebooks freigegebene Verzeichnisse zu installieren, kann der nfs-Bowser diesen rechner nicht finden. Gebe ich jedoch manuell die IP-Adresse des stationären Rechners ein, kann ich aus den freigegebenen Verzeichnissen auswählen und diese mounten. Die Firewall ist dabei deaktiviert. [snip] Gruß Pfeffer Sieht nach 'nem Routing Problem aus. Ich vermute jetzt mal, Du hast keinen DNS-Server laufen? Schon mal die /etc/hosts verglichen? Welche Firewall? (nfs/tcp port 2049 glaube ich)
Hoffe das hilft. Gruss, Roland -- Roland.Harke@gmx.de
Hallo Roland, was bedeutet Firewall nfs/tcp port 2049? Ich kann lediglich sagen das die Suse Firewall deaktiviert ist. habe den DNS-Server nachinstalliert und hoffentlich richtig konfiguriert. Jedoch nach wie vor kann ich bei der Konfiguration des Clients den Stationären Rechner nicht sehen. Habe mal die etc/exports und etc/hosts der beiden Rechner angehängt. etc/exports des Notebooks (Suse 9.1, keine Probleme) /windows/D/ 192.168.69.1/255.255.255.0(rw,no_root_squash,sync) 192.168.69.3/255.255.255.0(rw,no_root_squash,sync) etc/hosts des Notebooks (Suse 9.1, keine Probleme) # # hosts This file describes a number of hostname-to-address # mappings for the TCP/IP subsystem. It is mostly # used at boot time, when no name servers are running. # On small systems, this file can be used instead of a # "named" name server. # Syntax: # # IP-Address Full-Qualified-Hostname Short-Hostname # 127.0.0.1 localhost # special IPv6 addresses ::1 localhost ipv6-localhost ipv6-loopback fe00::0 ipv6-localnet ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 192.168.69.1 l1.local.net l1 192.168.69.3 l3.local.net l3 192.168.69.2 l2.local.net l2 etc/export des statonären Rechners l3 (Suse 9.2, Problem kann den Rechner l1 und l2 bei der Konfiguration des nfs-Clients nicht sehen) /windows/D/ 192.168.69.2(rw,no_root_squash,sync) / 192.168.69.2(ro,root_squash,sync) etc/hosts des statonären Rechners l3 (Suse 9.2, Problem kann den Rechner l1 und l2 bei der Konfiguration des nfs-Clients nicht sehen) # # hosts This file describes a number of hostname-to-address # mappings for the TCP/IP subsystem. It is mostly # used at boot time, when no name servers are running. # On small systems, this file can be used instead of a # "named" name server. # Syntax: # # IP-Address Full-Qualified-Hostname Short-Hostname # 127.0.0.1 localhost # special IPv6 addresses ::1 localhost ipv6-localhost ipv6-loopback fe00::0 ipv6-localnet ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 192.168.69.3 l3.local.net l3 192.168.69.1 l1.local.net l1 192.168.69.2 l2.local.net l2 Mir ist das alles ein Rätsel MfG Kris Pfeffer Am Sonntag, 6. März 2005 17:37 schrieb Roland Harke:
Hallo pfeffer,
On Sunday 06 March 2005 15:21, pfeffer wrote:
Hallo Linux-Gemeinde,
[snip]
Das Problem: Der statonäre Rechner (9.2) ist im Netzwerk nicht als nfs-Server sichtbar, aber nutzbar! Jedesmal, wenn ich versuche mit dem nfs-Client des Notebooks freigegebene Verzeichnisse zu installieren, kann der nfs-Bowser diesen rechner nicht finden. Gebe ich jedoch manuell die IP-Adresse des stationären Rechners ein, kann ich aus den freigegebenen Verzeichnissen auswählen und diese mounten. Die Firewall ist dabei deaktiviert.
[snip]
Gruß Pfeffer
Sieht nach 'nem Routing Problem aus. Ich vermute jetzt mal, Du hast keinen DNS-Server laufen? Schon mal die /etc/hosts verglichen? Welche Firewall? (nfs/tcp port 2049 glaube ich)
Hoffe das hilft. Gruss, Roland -- Roland.Harke@gmx.de
Hallo Kris, On Sunday 06 March 2005 19:12, pfeffer wrote:
Hallo Roland,
was bedeutet Firewall nfs/tcp port 2049? Ich kann lediglich sagen das die Suse Firewall deaktiviert ist. Eine deaktivierte Firewall ist zu nichts nutz. Konfiguriere also Deine Firewall so, dass der port 2049 für das TC-Protocol freigeschaltet ist. habe den DNS-Server nachinstalliert und hoffentlich richtig konfiguriert. Jedoch nach wie vor kann ich bei der Konfiguration des Clients den Stationären Rechner nicht sehen.
Für ein 3-Hosts Netz brauchst Du keinen DNS-Server. Ein caching only tut's da schon. (Du hast mehrere DNS-Howto's auf Deinem System; /usr/share/doc/howto/)
Habe mal die etc/exports und etc/hosts der beiden Rechner angehängt.
etc/exports des Notebooks (Suse 9.1, keine Probleme) /windows/D/ 192.168.69.1/255.255.255.0(rw,no_root_squash,sync) 192.168.69.3/255.255.255.0(rw,no_root_squash,sync)
sieht bei mir so aus: roland@roland:~> cat /etc/exports /media/dvd/ *(async,no_root_squash) roland@roland:~>
etc/hosts des Notebooks (Suse 9.1, keine Probleme)
[snip]
# IP-Address Full-Qualified-Hostname Short-Hostname 127.0.0.1 localhost
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 192.168.69.1 l1.local.net l1 192.168.69.3 l3.local.net l3 192.168.69.2 l2.local.net l2
etc/export des statonären Rechners l3 (Suse 9.2, Problem kann den Rechner l1 und l2 bei der Konfiguration des nfs-Clients nicht sehen)
/windows/D/ 192.168.69.2(rw,no_root_squash,sync) / 192.168.69.2(ro,root_squash,sync)
Mit 'ner windows Kiste im Netz würde ich samba einrichten. Ich habe aber keine Ahnung wie sich NFS mit windows verhält.
etc/hosts des statonären Rechners l3 (Suse 9.2, Problem kann den Rechner l1 und l2 bei der Konfiguration des nfs-Clients nicht sehen) # # hosts This file describes a number of hostname-to-address # mappings for the TCP/IP subsystem. It is mostly # used at boot time, when no name servers are running. # On small systems, this file can be used instead of a # "named" name server. # Syntax: # # IP-Address Full-Qualified-Hostname Short-Hostname #
127.0.0.1 localhost
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 192.168.69.3 l3.local.net l3 192.168.69.1 l1.local.net l1 192.168.69.2 l2.local.net l2
Mir ist das alles ein Rätsel
MfG Kris Pfeffer
[snip] Bliebe noch die /etc/fstab zu vergleichen Gruss, Roland -- Roland.Harke@gmx.de
participants (2)
-
pfeffer
-
Roland Harke