From: "Henne Vogelsang"

Hi,

Hallo !

On Monday, March 25, 2002 at 12:19:36, Frank Schmidt wrote:

[...]

Jede PPP verbindung benutzt /etc/ppp/*. Wie sieht denn deine

ip-up.local

aus? Steht nen interpreter drinne? Ist sie executable?

Ich habe mal die ip-up und die ip-up.local mit angefügt. Beide sind ausführbar. #!/bin/sh # File /etc/ppp/ip-up # (C) 1997-2001 SuSE GmbH, Germany # Klaus Franken 25.02.1998 # Remo Behn 18.07.1998 # Send suggestions and comments to feedback@suse.de BASENAME=${0##*/} INTERFACE=$1 DEVICE=$2 SPEED=$3 LOCALIP=$4 REMOTEIP=$5 if [ -z "$REMOTEIP" ]; then echo "Usage: $0 <INTERFACE> <DEVICE> <SPEED> <LOCALIP> <REMOTEIP>" exit 1 fi TERM=raw export TERM . /etc/rc.config case "$INTERFACE" in ippp*) # find the device found=0 for I in $NETCONFIG $NETCONFIG_PCMCIA; do eval NETDEV=\$NETDEV$I if [ $NETDEV = $INTERFACE ]; then found=1 break; fi done if [ $found -eq 0 ]; then echo "Device '$INTERFACE' not configured in '/etc/rc.config'" exit 1 fi eval IFCONFIG=\$IFCONFIG$I case "$BASENAME" in ip-up) # Get the nameservers (works with ipppd option ms-get-dns): if [ -n "$MS_DNS1" -a "$START_NAMED" != "yes" ]; then /sbin/modify_resolvconf modify -s ipppd -e "$INTERFACE" \ -p ipppd -f /etc/ppp/ip-up -n "$MS_DNS1 $MS_DNS2" -t - << EOT This is a temporary resolv.conf created by ipppd. The previous file has been saved as . It will be restored when ippp disconnects. If you don't like ipppd to change your nameserver settings then set MODIFY_RESOLV_CONF_DYNAMICALLY=no in /etc/rc.config or remove the option ms-get-dns from /etc/ppp/options.ippp*. EOT fi # # SuSE Firewall script: If you installed the package firewals # and configured your firewall in /etc/rc.config.d/firewall.rc.config # then set START_FW in /etc/rc.config to yes and it will be # started here: # test "$START_FW" = yes && /sbin/SuSEfirewall test -x /sbin/SuSEpersonal-firewall && . /sbin/SuSEpersonal-firewall # # You may choose to use a default firewall script, configured for # the standard dialup user(install package ipchains): # #test -x /etc/ppp/inet_chains.local && /etc/ppp/inet_chains.local "$@" # maybe you want to start mail services: # set follow variables in /etc/rc.config.d/sendmail.rc.config # SENDMAIL_TYPE="yes" # SENDMAIL_SMARTHOST="<ISP-mailserver>" # SENDMAIL_ARGS="-bd -om" # SENDMAIL_EXPENSIVE="yes" # SENDMAIL_NOCANONIFY="yes" #/usr/bin/fetchmail -a -v >>/var/log/fetchmail 2>&1 & #/usr/sbin/sendmail -q & # As an alternative to the commands above, you can use a seperate script, # /etc/ppp/poll.tcpip. The default scripts as shipped is able to set the # system clock using ntpdate (see the XNTPD_INITIAL_NTPDATE setting in # /etc/rc.config). It supports fetchmail with a system-wide # /etc/fetchmailrc and can use UUCP to fetch mail over TCP/IP, provided # that UUCP is configured properly. Last not least it also calls sendmail # to send any queued mail. Uncomment the line below. # /etc/ppp/poll.tcpip # call ip-up.local if it exists and is executable: test -x /etc/ppp/ip-up.local && /etc/ppp/ip-up.local "$@" ;; ip-down) # Restore the nameservers (got with ipppd option ms-get-dns): if [ -n "$MS_DNS1" -a "$START_NAMED" != "yes" ]; then /sbin/modify_resolvconf restore -s ipppd -e "$INTERFACE" fi # restart interface /sbin/ifconfig $INTERFACE $IFCONFIG # set routes from /etc/route.conf /etc/init.d/route start $INTERFACE # # SuSE Firewall script: If you installed the package firewals # and configured your firewall in /etc/rc.config.d/firewall.rc.config # then set START_FW in /etc/rc.config to yes and it will be # started here: # test "$START_FW" = yes && /sbin/SuSEfirewall test -x /sbin/SuSEpersonal-firewall && . /sbin/SuSEpersonal-firewall # call ip-down.local if it exists and is executable: test -x /etc/ppp/ip-down.local && /etc/ppp/ip-down.local "$@" ;; *) ;; esac ;; ppp*) # Analog-PPP, add commands as you need... case "$BASENAME" in ip-up) # # This code allows automatic configuration of your resolv.conf # for peer supplied DNS addresses when using the `usepeerdns' # option. Original resolv.conf is restored when ip-down is called # by pppd when the link goes down. # if [ -n "$USEPEERDNS" -a -f /etc/ppp/resolv.conf -a "$START_NAMED" != "yes" ]; then /sbin/modify_resolvconf modify -s pppd -p pppd -e "$INTERFACE" \ -f /etc/ppp/ip-up -n "$DNS1 $DNS2" -t - << EOT This is a temporary resolv.conf created by pppd. The previous file has been saved as <see Backup: field above>. It will be restored when pppd disconnects. If you do not like pppd to change your nameserver settings then set MODIFY_RESOLV_CONF_DYNAMICALLY=no in /etc/rc.config. EOT fi # # SuSE Firewall script: If you installed the package firewals # and configured your firewall in /etc/rc.config.d/firewall.rc.config # then set START_FW in /etc/rc.config to yes and it will be # started here: # test "$START_FW" = yes && /sbin/SuSEfirewall test -x /sbin/SuSEpersonal-firewall && . /sbin/SuSEpersonal-firewall # # You may choose to use a default firewall script, configured for # the standard dialup user(install package ipchains): # #test -x /etc/ppp/inet_chains.local && /etc/ppp/inet_chains.local "$@" # call ip-up.local if it exists and is executable: test -x /etc/ppp/ip-up.local && /etc/ppp/ip-up.local "$@" ;; ip-down) # # This code restores the original resolv.conf saved when ip-up # was called by the pppd which uses the `usepeerdns' option and # resolv.conf was modified for the supplied dns server adresses. # if [ -n "$USEPEERDNS" -a -f /etc/ppp/resolv.conf -a "$START_NAMED" != "yes" ]; then /sbin/modify_resolvconf restore -s pppd -e "$INTERFACE" fi # # SuSE Firewall script: If you installed the package firewals # and configured your firewall in /etc/rc.config.d/firewall.rc.config # then set START_FW in /etc/rc.config to yes and it will be # started here: # test "$START_FW" = yes && /sbin/SuSEfirewall test -x /sbin/SuSEpersonal-firewall && . /sbin/SuSEpersonal-firewall # call ip-down.local if it exists and is executable: test -x /etc/ppp/ip-down.local && /etc/ppp/ip-down.local "$@" ;; *) ;; esac ;; *) # dont know... ;; esac | logger -p security.notice -t $BASENAME #!/bin/bash # File /etc/ppp/ip-up.local # The following lines added for Linux-HA support # Heartbeat echo "haha" beep DEVFILE=`echo $DEVICE | sed -e 's!^/dev/!!' -e 's!/!.!g'` # Heartbeat echo "haha" beep OUTFILE=/var/run/ppp.d/$DEVFILE # Heartbeat echo "haha" beep ( # Heartbeat echo "$IPREMOTE" # Heartbeat echo "$IFNAME" # Heartbeat echo "$PPPD_PID" # Heartbeat echo "$IPLOCAL" # Heartbeat ) > $OUTFILE # Heartbeat echo "haha" beep

Henne

mfg Frank _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com