Hallo Wenn ich meine 10.2 booten will mit DMA dann kommt folgendes: ide-amd74xxx NForce-MCP51 Bios Settings hda : dma hdb : dma hdc : dma hdd : dma hda : lost interrupt nehme ich die falseeistellungen ohne DMA bootet die Kiste. Von DVD läuft sie auch normal mit DMA hoch. Unter XP und im Betreib keine Probleme Eine Erklärung? CPU AMD Socket 754 Ist der ide-amd74xxx vielleicht Falsch? Müsste da nicht was von NVIDIA als IDE stehen ? Board: Northbridge NVIDA Geforce 6100 Southbridge NVIDIA nForce 410 Storage nForce 410 --------------------------------------------------------------------------------- # Modified by YaST2. Last modification on Di Feb 27 22:08:53 CET 2007 default 1 timeout 8 color white/blue black/light-gray ##gfxmenu (hd0,3)/boot/message ##YaST - generic_mbr ###Don't change this comment - YaST2 identifier: Original name: linux### title SUSE 10.2 root (hd0,3) kernel /boot/vmlinuz root=/dev/hda4 showopts ide=dma splash=verbose nosmp noresume initrd /boot/initrd ###Don't change this comment - YaST2 identifier: Original name: windows### title Windows rootnoverify (hd0,0) chainloader (hd0,1)+1 ###Don't change this comment - YaST2 identifier: Original name: floppy### title Diskette rootnoverify (hd0,0) chainloader (fd0)+1 ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 10.2 root (hd0,3) kernel /boot/vmlinuz root=/dev/hda4 showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3 initrd /boot/initrd ---------------------------------------------------------------------------- Kann einer da weiterhelfen. Danke Stefan -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo Stefan, Am Sonntag, 4. März 2007 11:38 schrieb Stefan Fehlbier:
Hallo
Wenn ich meine 10.2 booten will mit DMA dann kommt folgendes: ide-amd74xxx NForce-MCP51 Bios Settings hda : dma hdb : dma hdc : dma hdd : dma hda : lost interrupt Was "sagt" dmesg? Bei Interruptproblemen hilft als Bootparameter manchmal pci=usepirq oder pci=routeirq.Bei letzterem hast Du dann 24 IRQ's und die werden dann auch anders verteilt. ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3 die würde ich dann aber wieder rausnehmen. Wenn es geht, dann poste doch mal den Output von dmesg, da stehen manchmal Parameter, die einem weiterhelfen können. Viel Glück Gruß Thomas
-- Mögen täten wir schon wollen, doch dürfen haben wir uns nicht getraut. Karl Valentin -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Thomas Becker schrieb:
Hallo Stefan, Am Sonntag, 4. März 2007 11:38 schrieb Stefan Fehlbier:
Hallo
Wenn ich meine 10.2 booten will mit DMA dann kommt folgendes: ide-amd74xxx NForce-MCP51 Bios Settings hda : dma hdb : dma hdc : dma hdd : dma hda : lost interrupt
Was "sagt" dmesg? Bei Interruptproblemen hilft als Bootparameter manchmal pci=usepirq oder pci=routeirq.Bei letzterem hast Du dann 24 IRQ's und die werden dann auch anders verteilt.
ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
die würde ich dann aber wieder rausnehmen. Wenn es geht, dann poste doch mal den Output von dmesg, da stehen manchmal Parameter, die einem weiterhelfen können. Viel Glück Gruß Thomas
Hallo Thomas Habe das IDE wieder ein genommen und den Rest drinn gelassen. Bootet. Tippe auf acpi. Oder mal Etappenweise Einträge rausnehmen? Stefan dmeag: Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bfc0000 (usable) BIOS-e820: 000000003bfc0000 - 000000003bfce000 (ACPI data) BIOS-e820: 000000003bfce000 - 000000003bff0000 (ACPI NVS) BIOS-e820: 000000003bff0000 - 000000003c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 63MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 245696 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 16320 pages, LIFO batch:3 DMI 2.3 present. Using APIC driver default IO/L-APIC disabled because your old system seems to be old overwrite with "apic" Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) Detected 1808.240 MHz processor. Built 1 zonelists. Total pages: 245696 Kernel command line: root=/dev/hda4 showopts ide=dma apm=off acpi=off noresume nosmp splash=verbose maxcpus=0 edd=off bootsplash: verbose mode. mapped APIC to ffffd000 (00000000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 967020k/982784k available (1697k kernel code, 15120k reserved, 968k data, 196k init, 65280k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3619.74 BogoMIPS (lpj=7239492) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000001 CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000000 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 3245k freed CPU0: AMD Sempron(tm) Processor 3100+ stepping 00 weird, boot CPU (#0) not listed by the BIOS. SMP mode deactivated, forcing use of dummy APIC emulation. Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f8b50 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9b9a, dseg 0xf0000 PnPBIOS: Resource structure does not contain an end tag. PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:05.0 PCI: Transparent bridge - 0000:00:10.0 PCI: Using IRQ router default [10de/0261] at 0000:00:0a.0 pnp: 00:0a: ioport range 0x290-0x297 has been reserved pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0b: ioport range 0xcf8-0xcff could not be reserved pnp: 00:0b: ioport range 0x800-0x87f has been reserved pnp: 00:0b: ioport range 0x880-0x8ff has been reserved pnp: 00:0b: ioport range 0x500-0x57f has been reserved pnp: 00:0b: ioport range 0x580-0x5ff has been reserved pnp: 00:0b: ioport range 0x900-0x97f has been reserved pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0c: ioport range 0xcf8-0xcff could not be reserved PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:10.0 IO window: d000-dfff MEM window: faa00000-faafffff PREFETCH window: 40000000-400fffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled on user request. audit: initializing netlink socket (disabled) audit(1173011317.624:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:03.0 to 64 pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:00:04.0 to 64 pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:11: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 input: ImPS/2 Generic Wheel Mouse as /class/input/input2 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 Using IPI No-Shortcut mode Freeing unused kernel memory: 196k freed Time: tsc clocksource has been installed. Unknown option '' ide_setup: ide=dma -- BAD OPTION Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 161 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SAMSUNG SP2514N, ATA DISK drive hdb: SAMSUNG SP2514N, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > hda4 hdb: max request size: 512KiB hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive hdd: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 libata version 2.00 loaded. sata_nv 0000:00:0e.0: version 2.0 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE000 irq 9 ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 9 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hda4 Ending clean XFS mount for filesystem: hda4 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] lp0: using parport0 (interrupt-driven). i2c_adapter i2c-0: nForce2 SMBus adapter at 0x600 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x700 usbcore: registered new driver usbfs usbcore: registered new driver hub Linux agpgart interface v0.101 (c) Dave Jones PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 5, io mem 0xfebdfc00 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 9, io mem 0xfebde000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 nvidia: module license 'NVIDIA' taints kernel. PCI: Setting latency timer of device 0000:00:05.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2006 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xf8878c00, 00:50:bf:d4:b9:5e, IRQ 9 eth0: Identified 8139 chip type 'RTL-8139C' Model 1006 Rev 00000000 Serial 10061102 hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1173011332.992:2): AppArmor initialized Adding 104380k swap on /dev/hda5. Priority:-1 extents:1 across:104380k Adding 2097140k swap on /dev/hda7. Priority:-2 extents:1 across:2097140k Adding 168644k swap on /dev/hda8. Priority:-3 extents:1 across:168644k powernow-k8: Found 1 AMD Sempron(tm) Processor 3100+ processors (version 2.00.00) powernow-k8: BIOS error - no PSB or ACPI _PSS objects powernow: This module only works with AMD K7 CPUs eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 audit(1173007747.174:3): audit_pid=3321 old=0 by auid=4294967295 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 NET: Registered protocol family 17 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 24 ppp0 renamed to dsl0 /dev/vmmon[3763]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[3763]: Module vmmon: initialized /dev/vmnet: open called by PID 3802 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 3817 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened eth0: no IPv6 routers present /dev/vmnet: open called by PID 3930 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 3931 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 4035 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 4036 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present NET: Registered protocol family 4 NET: Registered protocol family 3 NET: Registered protocol family 5 NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS-fs warning (device hdb1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel. NTFS volume version 3.1. vmmon: Had to deallocate AWE 16 pages from vm driver d274e000 vmmon: Had to deallocate AWE 16 pages from vm driver d1890000 -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo Stefan, Am Sonntag, 4. März 2007 12:44 schrieb Stefan Fehlbier: Mhmm, sieht ja seltsam aus.Das hier irritiert mich etwas:
IO/L-APIC disabled because your old system seems to be old ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ overwrite with "apic" Was ja nicht sein kann...(1) Gibt es evtl ein neueres Bios für Deinen Rechner? Sieh mal hier: CPU0: AMD Sempron(tm) Processor 3100+ stepping 00 weird, boot CPU (#0) not listed by the BIOS. ^^^^^^^^^^^^^^^^^^^^^^ und hier: pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS (1)..... powernow-k8: BIOS error - no PSB or ACPI _PSS objects powernow: This module only works with AMD K7 CPUs Ich vermute erstmal, das Du ein "Bios" hast, welches Die CPU nicht richtig unterstützt.Sieh mal, ob Du ein neueres bekommst.Wenn ja, dann solltest Du alle Einträge herausnehmen, die Du eingetragen hast und nur mit dem Bootparameter "pci=routeirq" versuchen. Könntest Du auch jetzt gleich nochmal testen, wird aber schätze ich (noch) nichts bringen.
Hast Du einen Drucker am LPT, wenn nicht, im Bios abschalten, dann sollte das hier verschwinden:
spurious 8259A interrupt: IRQ7. Das wird schon, Don't Panic ;-)) Was für ein Board genau ist denn das.Mir kommt das irgendwie sehr bekannt vor, ist das ein Asus? Und was sagt "cat /proc/interrupts"? Wenn ich nicht sofort antworte, dann sei bitte nicht sauer. Bis später, Gruß Thomas
-- Mögen täten wir schon wollen, doch dürfen haben wir uns nicht getraut. Karl Valentin -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo Stefan, noch ein kleiner Nachtrag... Am Sonntag, 4. März 2007 13:41 schrieb Thomas Becker:
Gibt es evtl ein neueres Bios für Deinen Rechner? Ich habe noch etwas vergessen, überprüfe nochmals Deine Einstellungen im Bios selbst.Falls Du da unsicher bist, dann kannst Du hier: http://www.bios-info.de/ und hier: http://www.wimsbios.com/index.jsp Informationen zu allem, was mit Bios zu tun hat, finden. Bis denne Thomas -- Mögen täten wir schon wollen, doch dürfen haben wir uns nicht getraut. Karl Valentin -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Thomas Becker schrieb:
Hallo Stefan, Am Sonntag, 4. März 2007 12:44 schrieb Stefan Fehlbier: Mhmm, sieht ja seltsam aus.Das hier irritiert mich etwas:
IO/L-APIC disabled because your old system seems to be old
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
overwrite with "apic"
Was ja nicht sein kann...(1) Gibt es evtl ein neueres Bios für Deinen Rechner? Sieh mal hier:
CPU0: AMD Sempron(tm) Processor 3100+ stepping 00 weird, boot CPU (#0) not listed by the BIOS.
^^^^^^^^^^^^^^^^^^^^^^ und hier:
pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
(1).....
powernow-k8: BIOS error - no PSB or ACPI _PSS objects powernow: This module only works with AMD K7 CPUs
Ich vermute erstmal, das Du ein "Bios" hast, welches Die CPU nicht richtig unterstützt.Sieh mal, ob Du ein neueres bekommst.Wenn ja, dann solltest Du alle Einträge herausnehmen, die Du eingetragen hast und nur mit dem Bootparameter "pci=routeirq" versuchen. Könntest Du auch jetzt gleich nochmal testen, wird aber schätze ich (noch) nichts bringen.
Hast Du einen Drucker am LPT, wenn nicht, im Bios abschalten, dann sollte das hier verschwinden:
spurious 8259A interrupt: IRQ7.
Das wird schon, Don't Panic ;-)) Was für ein Board genau ist denn das.Mir kommt das irgendwie sehr bekannt vor, ist das ein Asus? Und was sagt "cat /proc/interrupts"? Wenn ich nicht sofort antworte, dann sei bitte nicht sauer. Bis später, Gruß Thomas
Hallo Thomas Ja ist ein ASUS K8N-VM mit vorletzten BIOS MfG STefan -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo Stefan, Am Sonntag, 4. März 2007 15:28 schrieb Stefan Fehlbier:
Hallo Thomas
Ja ist ein ASUS K8N-VM mit vorletzten BIOS Dachte ich mir schon, versuche das mal mit dem Update, ich denke, daß sich die Probleme dann erledigt haben. ;-)) Da bin ich mir fast schon sicher... Ich habe zwar ein anderes Board von Asus, aber da war das ähnlich.Den Rechner hat jetzt meine Frau und der läuft und läuft und..... .. mit ACPI und DMA etc. MfG STefan Gruß retour Thomas
-- Mögen täten wir schon wollen, doch dürfen haben wir uns nicht getraut. Karl Valentin -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
participants (2)
-
Stefan Fehlbier
-
Thomas Becker