Moin moin, ich versuch gerade verzweifelt via DHCP eine statische Route zu setzen nur leider scheint der dhcp-client die option 249 zu ignorieren. Hat jemand das schonmal hinbekommen ?? mfg Max
Markus Heinze wrote:
Moin moin,
ich versuch gerade verzweifelt via DHCP eine statische Route zu setzen nur leider scheint der dhcp-client die option 249 zu ignorieren. Hat jemand das schonmal hinbekommen ??
Scheint etwas neuer zu sein, auf Windows 2003 DHCP Server ist sie vorhanden, bei Windows 2000 noch nicht. "man dhcp-options" sagt: option static-routes ip-address ip-address [, ip-address ip-address...]; This option specifies a list of static routes that the client should install in its routing cache. If multiple routes to the same destination are specified, they are listed in descending order of priority. The routes consist of a list of IP address pairs. The first address is the destination address, and the second address is the router for the destination. The default route (0.0.0.0) is an illegal destination for a static route. To specify the default route, use the routers option. Also, please note that this option is not intended for classless IP routing - it does not include a subnet mask. Dies könnte der Grund sein für das Problem: Since classless IP routing is now the most widely deployed routing standard, this option is virtually useless, and is not implemented by any of the popular DHCP clients, for example the Microsoft DHCP client. Was für ein DHCP-Client ist das denn? -- Sandy Antworten bitte nur in die Mailingliste! PMs bitte an: news-reply2 (@) japantest (.) homelinux (.) com -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Moin moin, Also der DHCP Server ist in der Tat ein Windows 2003, die meisten Clients sind Windows XP oder schlimmer :( Jedoch gibts auch einige Clients mit richtigem Betriebssystem, Sprich Linux, speziell openSuSE 11. Es gibt einige administrative Netze die ein 'normaler' Client nicht erreichen soll, daher sind entsprechend die Mac-Adressen im DHCP hinterlegt welche spezielle Optionen konfgurriert bekommen, unter anderem die Option 249. Ich find diese Option äusserst praktisch und bin leider etwas enttäuscht das ich sie mit meiner SuSI nicht nutzen kann und stattdessen am Lappi frickeln muss, wo doch der Server die Arbeit machen sollte. Ich hoff das dies zeitnah beim ISC Client einfliessen wird bis dahin muss ich halt selbst schaun das die Routen passen. mfg Max Sandy Drobic schrieb:
Markus Heinze wrote:
Moin moin,
ich versuch gerade verzweifelt via DHCP eine statische Route zu setzen nur leider scheint der dhcp-client die option 249 zu ignorieren. Hat jemand das schonmal hinbekommen ??
Scheint etwas neuer zu sein, auf Windows 2003 DHCP Server ist sie vorhanden, bei Windows 2000 noch nicht.
"man dhcp-options" sagt:
option static-routes ip-address ip-address [, ip-address ip-address...];
This option specifies a list of static routes that the client should install in its routing cache. If multiple routes to the same destination are specified, they are listed in descending order of priority.
The routes consist of a list of IP address pairs. The first address is the destination address, and the second address is the router for the destination.
The default route (0.0.0.0) is an illegal destination for a static route. To specify the default route, use the routers option. Also, please note that this option is not intended for classless IP routing - it does not include a subnet mask.
Dies könnte der Grund sein für das Problem:
Since classless IP routing is now the most widely deployed routing standard, this option is virtually useless, and is not implemented by any of the popular DHCP clients, for example the Microsoft DHCP client.
Was für ein DHCP-Client ist das denn?
Markus Heinze wrote:
Moin moin,
Also der DHCP Server ist in der Tat ein Windows 2003, die meisten Clients sind Windows XP oder schlimmer :( Jedoch gibts auch einige Clients mit richtigem Betriebssystem, Sprich Linux, speziell openSuSE
Tröste dich, ich setze die Routen im Loginscript, aber ich habe auch eine reiche Windows-Client-Umgebung, Linux läuft nur auf Servern mit statischen Adressen.
11. Es gibt einige administrative Netze die ein 'normaler' Client nicht erreichen soll, daher sind entsprechend die Mac-Adressen im DHCP hinterlegt welche spezielle Optionen konfgurriert bekommen, unter anderem die Option 249. Ich find diese Option äusserst praktisch und bin
Wenn jemand ein Netz nicht erreichen soll, ist es am einfachsten, ihn physikalisch nicht zu verbinden. Ich verwende VLans/getrennte Switche und eine zweite Netzwerkkarte für die Teilnehmer des Admin-Netzes. Einfach, transparent und sicher, aber vor allem wartbar. (^-^) -- Sandy Antworten bitte nur in die Mailingliste! PMs bitte an: news-reply2 (@) japantest (.) homelinux (.) com -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
participants (2)
-
Markus Heinze
-
Sandy Drobic