Funktioniert ACPI automatisch?
Nun habe ich eine dmesg, die danach aussieht als ob nun ACPI mit dem KT400A funktioniert. Muß man dazu etwas einstellen oder funktioniert Stromsparen nun automatisch? Warum ACPI: Skipping APIC setup ? Ist diese dmesg nun ok bis auf die HD-Fehlermeldung? Ich hoffe, ich bekomme keine Rüge wegen der vollen dmesg, aber das letzte Mal wurde dies von der Liste extra gewünscht. Al # dmesg Linux version 2.4.21-87-athlon (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Thu Sep 18 10:18:21 UTC 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 501MB vmalloc/ioremap area available. 0MB HIGHMEM available. 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. ACPI: RSDP (v000 KT400A ) @ 0x000f7440 ACPI: RSDT (v001 KT400A AWRDACPI 16944.11825) @ 0x1fff3000 ACPI: FADT (v001 KT400A AWRDACPI 16944.11825) @ 0x1fff3040 ACPI: MADT (v001 KT400A AWRDACPI 16944.11825) @ 0x1fff7080 ACPI: DSDT (v001 KT400A AWRDACPI 00000.04096) @ 0x00000000 ACPI: Skipping APIC setup Building zonelist for node : 0 Kernel command line: root=/dev/hdb7 splash=silent splash=silent bootsplash: silent mode. bootsplash: silent mode. Initializing CPU#0 Detected 1999.839 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3984.58 BogoMIPS Memory: 514160k/524224k available (1738k kernel code, 9680k reserved, 605k data, 176k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) XP 2400+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030619 PCI: PCI BIOS revision 2.10 entry at 0xfb350, last bus=1 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 20) ACPI: PCI Interrupt Link [ALKB] (IRQs 21) ACPI: PCI Interrupt Link [ALKC] (IRQs 22) ACPI: PCI Interrupt Link [ALKD] (IRQs 23) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 00:00:08[A] -> IRQ 11 Mode 1 Trigger 1 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 00:00:08[B] -> IRQ 10 Mode 1 Trigger 1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 00:00:08[C] -> IRQ 12 Mode 1 Trigger 1 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 00:00:08[D] -> IRQ 5 Mode 1 Trigger 1 PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (11) already programmed PIC: IRQ (11) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: overridden by ACPI. PISCH: Plug In Scheduler Interface (Version 6) Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). kinoded started VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 32764 aio_setup: sizeof(struct page) = 48 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 16 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA hda: IC35L120AVV207-1, ATA DISK drive hdb: Maxtor 5T040H4, ATA DISK drive blk: queue c03e96c0, I/O limit 4095Mb (mask 0xffffffff) blk: queue c03e981c, I/O limit 4095Mb (mask 0xffffffff) hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive hdd: Maxtor 96147H6, ATA DISK drive blk: queue c03e9cb0, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=15017/255/63, UDMA(100) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=4982/255/63, UDMA(100) hdd: attached ide-disk driver. hdd: host protected area => 1 hdd: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 hdb9 > hdd: hdd1 ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. cryptoapi: loaded RAMDISK: Compressed image found at block 0 Freeing initrd memory: 390k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 176k freed md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,71), internal journal LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded Adding Swap: 200804k swap-space (priority 42) hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,71), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,67), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,72), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,73), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,69), internal journal EXT3-fs: mounted filesystem with ordered data mode. via-rhine.c:v1.10-LK1.1.17 March-1-2003 Written by Donald Becker http://www.scyld.com/network/via-rhine.html eth0: VIA VT6102 Rhine-II at 0xd000, 00:50:ba:2d:b7:4d, IRQ 10. eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1. eth1: VIA VT6102 Rhine-II at 0xec00, 00:04:61:4a:54:d4, IRQ 11. eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 45e1. raw1394: /dev/raw1394 device initialized usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:10.3: irq 5, pci mem e0834000 usb.c: new USB bus registered, assigned bus number 1 PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW. PCI: 00:10.3 PCI cache line size corrected to 64. ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 6 ports detected usb-uhci.c: $Revision: 1.275 $ time 10:45:43 Sep 18 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 12 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 hub.c: new USB device 00:10.1-1, assigned address 2 mice: PS/2 mouse device common for all mice usb.c: USB device 2 (vend/prod 0x9bf/0xdb) is not claimed by any active driver. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded IPsec Security Association Database (SADB): initialized. IPsec Security Policy Database (SPD): initialized. IPsec PF_KEY V2: initialized HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 1.1.4.1 HiSax: Layer2 Revision 1.1.4.1 HiSax: TeiMgr Revision 1.1.4.1 HiSax: Layer3 Revision 1.1.4.1 HiSax: LinkLayer Revision 1.1.4.1 HiSax: Approval certification failed because of HiSax: unauthorized source code changes IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0 IPv6 over IPv4 tunneling driver usb.c: registered new driver auerswald auermain.c: device is a COMpact 2206,Ser# HiSax: Card 1 Protocol EDSS1 Id=auerswald_usb0 (0) HiSax: DSS1 Rev. 1.1.4.1 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport0: PC-style at 0x378 [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 eth0: no IPv6 routers present -- Infos zu Softwarepatenten: http://swpat.ffii.org/index.de.html http://petition.eurolinux.org/index.html?LANG=de
participants (1)
-
Al Bogner