Hi Liste, ich betreibe Hylafax mit nem Modem. Das Modem - soviel kann ich gleich sagen - funktioniert einwandfrei! Ich habe nach der Install. von Hylafax faxsetup aufgerufen und alles passend eingetragen. Soweit so gut! Sobald ich aber ein Fax erfolgreich versendet habe bekomme ich diese Meldung mit faxstat geliefert: HylaFAX scheduler on www.apoptose.dynaccess.de: Running Modem modem (+49 7071 689080): Waiting for modem to come ready und Hylafax geht nicht mehr auf Empfang. Auch das Versenden eines weiteren Fax ist nicht möglich! Ich habe schon die ttySx getauscht, Modems getauscht... ich bin am Ende! Hat jemand ne Idee? Gruß Bernd config: LogFacility: daemon CountryCode: 49 AreaCode: 7071 LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: "etc/dialrules" ServerTracing: 527 SessionTracing: 527 ContCoverPage: etc/cover.templ MaxSendPages: 10 ModemGroup: any:.* config.modem: [schnipp] # # Generic Class 2 modem configuration. # # EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP # CountryCode: 49 AreaCode: 7071 FAXNumber: "+49 7071 123456" LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: "etc/dialrules" ServerTracing: 527 SessionTracing: 527 RecvFileMode: 0644 LogFileMode: 0600 DeviceMode: 0666 RingsBeforeAnswer: 3 SpeakerVolume: off GettyArgs: "-h %l dx_%s" LocalIdentifier: "Schwendele | Konantz" TagLineFont: etc/lutRS18.pcf TagLineFormat: "From %%l|%c|Page %%P of %%T" MaxRecvPages: 25 # # # Modem-related stuff: should reflect modem command interface # and hardware connection/cabling (e.g. flow control). # ModemType: Class2 # use this to supply a hint #ModemRate: 19200 # max rate for DCE-DTE communication #ModemFlowControl: xonxoff # XON/XOFF flow control assumed #ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem #ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not) # # We can append the "@" symbol to the dial string so that # the modem will wait 5 seconds before attempting to connect # and return result codes that distinguish between no carrier # and no answer. This makes it possible to avoid problems with # repeatedly dialing a number that doesn't have a fax machine # (kudos to Stuart Lynne for this trick.) # # NB: If you need to prefix phone numbers to get through a PBX, # put it in the ModemDialCmd; e.g. "DT9%s@". # #ModemDialCmd: ATDT%s # T for tone dialing # # Other possible configuration stuff. The default strings are # shown below. Only those that are different from the defaults # need to be included in the configuration file. # #ModemResetCmds: "" # stuff to do when modem is reset #ModemAnswerCmd: ATA # use this to answer phone #ModemNoFlowCmd: AT&K # disable flow control cmd #ModemHardFlowCmd: AT&K3 # hardware flow control cmd #ModemSoftFlowCmd: AT&K4 # software flow control cmd #ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer # # Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH. # Note that we both turn the speaker on/off and set volume. # #ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1" #ModemEchoOffCmd: ATE0 # disable command echo #ModemVerboseResultsCmd: ATV1 # enable verbose command results #ModemResultCodesCmd: ATQ0 # enable result codes #ModemOnHookCmd: ATH0 # place phone on hook (hangup) #ModemSoftResetCmd: ATZ # do soft reset of modem #ModemSoftResetCmdDelay: 3000 # pause after soft reset #ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier #ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2 seconds #ModemRecvFillOrder: LSB2MSB # bit order of received facsimile #ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit # # Configuration parameters for Class 2 modems. # Class2Cmd: AT+FCLASS=2 # command to enter class 2 Class2BORCmd: AT+FBOR=0 # bit order for phase B/C/D (direct) Class2RELCmd: AT+FREL=1 # byte-align EOL codes on recv Class2CQCmd: "" # commands to enable copy quality proc. Class2AbortCmd: AT+FK # abort session command Class2CQQueryCmd: AT+FCQ=? # query for copy quality capabilities Class2DCCQueryCmd: AT+FDCC=? # query for modem capabilities Class2TBCCmd: AT+FTBC=0 # setup stream mode Class2CRCmd: AT+FCR=1 # enable capability to receive Class2PHCTOCmd: AT+FPHCTO=30 # set phase C timeout parameter Class2BUGCmd: AT+FBUG=1 # enable HDLC frame tracing Class2LIDCmd: AT+FLID # set local identifier command Class2DCCCmd: AT+FDCC # set modem capabilities command Class2DISCmd: AT+FDIS # set session parameters command Class2DDISCmd: "" # disable pre-dial DIS command hack Class2CIGCmd: AT+FCIG # set polling identifier command Class2PTSCmd: AT+FPTS # set post-page status command Class2SPLCmd: AT+FSPL # set polling indicator command # # If Class2RecvDataTrigger is not set, then it is set to DC1 # Class2RecvDataTrigger: "" # character sent to modem to start recv Class2XmitWaitForXON: yes # if true, wait for XON before send