December 2002 - openSUSE Users (Deutsch)

x-cdroast compilieren
by Bernd Wagner 01 Dec '02

01 Dec '02

Hallo ! Ich wollte mir die neuste Version con x-cdroast installieren. nach ./configure bekomme Ich diese Fehlermeldung checking for GLIB - version >= 1.2.3... no *** The glib-config script installed by GLIB could not be found *** If GLIB was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GLIB_CONFIG environment variable to the *** full path to glib-config. configure: error: Test for GLIB failed. See the file 'INSTALL' for help. Wie finde Ich heraus welches Paket Ich brauche oder wie finde Ich die angegebene Datei in meinem System ? ************************ rpm -q glib glib-1.2.10-305 rpm -q gtk gtk-1.2.10-437 find -name "glib-config" kein ergebniss ************************** Gruss, Bernd

2 2

cdbakeoven
by Jens Frederich 01 Dec '02

01 Dec '02

Wie kann ich cdbakeoven umstellen so das ich nicht nur als root brennen kann sondern auch als normal-user. Bekomme folgende Fehlermeldung: status: starting burn process! Process: cdrecord Operation not permitted. WARNING: Cannot do mlockall(2) usw. das gleich nur noch für andere Aufrufe.. Jens

4 3

Nach Installation nur 0101010101
by Christian Riekenberg 01 Dec '02

01 Dec '02

Hallo !! Da mir die Suse Support Datenbank nicht so wirklich weiterhelfen kann, wende ich mich nun an euch. Ich habe auf meiner HDD1 Win2000 laufen gehabt und wollte auf meiner HDD2 Suse Linux 8.0 installieren. (Ist eine zweite Festplatte in einem Wechselrahmen) Er installiert auch fleissig, jedoch nach dem Booten bekomme ich statt Lilo Bootmanager nur einen Bildschirm der in etwa so aussieht.... 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 Und das war's.... Wenn ich den alten Bootsektor wieder herstelle, läuft Win2000 wieder normal.... Was ist passiert ??? Habe mehrfach versucht das zu installieren und beim letzteb versuch ist mein Mainboard abgeschirmt :-<<<< Wie auch immer !!! Hier http://sdb.suse.de/de/sdb/html/1024_Zylinder.html wird ja gesagt, das Linux Platz innerhalb des 1024 Zylinder braucht. Aber da ich auch schon versucht habe den Bootsektor auf Diskette zu schreiben kann es daran auch nicht liegen. Unter Windows (Verwaltung) sieht die Linux Platte so aus : 1. Fat32 mit Win Daten 2. Linux Swap 3. Linux Natürlich werden die letzten beiden als unformatiert angezeigt in Win. In der Suse-DB habe ich nämlich auch noch das gefunden http://sdb.suse.de/de/sdb/html/kgw_lilo_errmsg.html habe ich also eine falsch HDD-Geometrie ?? HILFE.... Danke CU Christian

4 3

Staroffice-Impress
by Karl Brandt 01 Dec '02

01 Dec '02

Zwar kein SuSE-Problem, aber trotzdem: Ich versuche gerade einen kleinen Vortrag mit Impress zu erstellen. Die mitgelieferten Vorlagen passen aber nicht so richtig zum Thema. Gibt es irgendwo Quellen für zusätzliche Vorlagen ? Mit Google habe ich bisher keinen Erfolg gehabt. MfG Karl Brandt

3 4

Fw: Nach Installation nur 0101010101
by Christian Riekenberg 01 Dec '02

01 Dec '02

Hallo !! Also, hier noch mal alle Daten die weiterhelfen sollten: Hier die Daten.... Fdisk -l ergab: Disk /dev/hdd: 255 heads, 63 sectors, 5005 cylinders /*Wechselrahmen Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hdd1 2 5005 40194630 f Win95 Ext'd (LBA) /dev/hdd5 2 2551 20482843+ b Win95 FAT32 /dev/hdd6 2552 2679 1028128+ 82 Linux swap /* Hier die beiden Linux Partitionen auf dem Wechselrahmen /dev/hdd7 2680 5005 18683563+ 83 Linux Disk /dev/hda: 255 heads, 63 sectors, 4867 cylinders /* Die eigentlich Festplatte mit Windows C: (Boot) Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 2 2001 16065000 f Win95 Ext'd (LBA) /dev/hda2 * 2002 4867 23021145 7 HPFS/NTFS /dev/hda5 2 2001 16064968+ 7 HPFS/NTFS Die obere Platte ist eigentlich der Wechselrahmen. Habe da eigentlich nur 1. Win-Partition und 2 für Linux !! So sieht das in Windows aus: www.christian-riekenberg.de/tools/platten.jpg Hier nun die lilo.conf: boot = /dev/hdd7 change-rules reset read-only menu-scheme = Wg:kw:Wg:Wg lba32 prompt timeout = 80 message = /boot/message image = /boot/vmlinuz label = linux root = /dev/hdd7 vga = 791 initrd = /boot/initrd append = " hdc=ide-scsi" image = /boot/vmlinuz.suse label = failsafe root = /dev/hdd7 vga = 791 initrd = /boot/initrd.suse append = "ide=nodma apm=off acpi=off hdc=ide-scsi" optional other = /dev/hda2 label = windows image = /boot/memtest.bin label = memtest86 Und zum Schluss der Inhalt der Boot.msg Cannot find map file. Loaded 258 symbols from 13 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.18-4GB (root(a)Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) <4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) <4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <4>Scanning bios EBDA for MXT signature <4>On node 0 totalpages: 131056 <4>zone(0): 4096 pages. <4>zone(1): 126960 pages. <4>zone(2): 0 pages. <4>Building zonelist for node : 0 <4>Kernel command line: initrd=initrd ramdisk_size=65536 rescue=1 BOOT_IMAGE=linux SuSE=,1207300200,ADCA5F1C., vga=0x0317 expert=0 <6>Initializing CPU#0 <4>Detected 1668.728 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 3329.22 BogoMIPS <4>Memory: 509280k/524224k available (1389k kernel code, 14556k reserved, 406k data, 120k init, 0k highmem) <4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) <4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) <4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes) <7>CPU: Before vendor init, caps: 0383f9ff c1c3f9ff 00000000, vendor = 2 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <7>CPU: After vendor init, caps: 0383f9ff c1c3f9ff 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0383f9ff c1c3f9ff 00000000 00000000 <7>CPU: Common caps: 0383f9ff c1c3f9ff 00000000 00000000 <4>CPU: AMD Athlon(tm) XP 2000+ stepping 02 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch(a)atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xfb470, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <3>Unknown bridge resource 0: assuming transparent <6>PCI: Using IRQ router default [1106/3099] at 00:00.0 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) <4>mxt_scan_bios: enter <4>Starting kswapd <4>kinoded started <5>VFS: Diskquotas version dquot_6.5.0 initialized <5>ACPI: APM is already active, exiting <6>vesafb: framebuffer at 0xe2000000, mapped to 0xe080d000, size 32768k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=0 <6>vesafb: protected mode interface info at c000:0336 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>Looking for splash picture..... found (1024x768, 42648 bytes). <4>Console: switching to colour frame buffer device 105x34 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <4>block: 128 slots per queue, batch=32 <4>RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>VP_IDE: IDE controller on PCI bus 00 dev 89 <4>PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq. <4>VP_IDE: chipset revision 6 <4>VP_IDE: not 100%% native mode: will probe irqs later <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1 <4> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hdaMA, hdbMA <4> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdcMA, hddMA <4>hda: MAXTOR 4K040H2, ATA DISK drive <4>hdb: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive <4>hdc: AOPEN CD-RW CRW2040, ATAPI CD/DVD-ROM drive <4>hdd: IC35L040AVER07-0, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>blk: queue c031ece4, I/O limit 4095Mb (mask 0xffffffff) <4>hda: safely enabled flush <6>hda: 78198750 sectors (40038 MB) w/2000KiB Cache, CHS=4867/255/63, UDMA(100) <4>blk: queue c031f1a4, I/O limit 4095Mb (mask 0xffffffff) <4>hdd: safely enabled flush <6>hdd: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100) <4>hdb: no flushcache support <4>hdb: ATAPI 48X DVD-ROM drive, 128kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <4>hdc: no flushcache support <4>hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache <4>ide-floppy driver 0.99 <6>Partition check: <6> hda: hda1 < hda5 > hda2 <6> hdd: [PTBL] [5005/255/63] hdd1 < hdd5 hdd6 hdd7 > <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>loop: loaded (max 16 devices) <6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 <6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. <4>ide-floppy driver 0.99 <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 4096 buckets, 32Kbytes <4>TCP: Hash tables configured (established 32768 bind 32768) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <4>Uncompressing.........................................done. <4>Freeing initrd memory: 4044k freed <4>VFS: Mounted root (minix filesystem). <7>VFS: Disk change detected on device ide0(3,64) <6>cdrom: open failed. <7>VFS: Disk change detected on device ide1(22,0) <6>Non-volatile memory driver v1.1 <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <7>VFS: Disk change detected on device fd(2,0) <4>end_request: I/O error, dev 02:00 (floppy), sector 0 <6>cdrom: open failed. <7>VFS: Disk change detected on device ide1(22,0) <6>usb.c: registered new driver usbdevfs <6>usb.c: registered new driver hub <6>usb-uhci.c: $Revision: 1.275 $ time 14:22:01 Mar 27 2002 <6>usb-uhci.c: High bandwidth mode enabled <6>usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10 <4>usb-uhci.c: Detected 2 ports <6>usb.c: new USB bus registered, assigned bus number 1 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <6>usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10 <4>usb-uhci.c: Detected 2 ports <6>usb.c: new USB bus registered, assigned bus number 2 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <6>usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 10 <4>usb-uhci.c: Detected 2 ports <6>usb.c: new USB bus registered, assigned bus number 3 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver <6>usb.c: registered new driver hiddev <6>usb.c: registered new driver hid <6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech(a)suse.cz> <6>hid-core.c: USB HID support drivers <6>cdrom: open failed. <7>VFS: Disk change detected on device ide1(22,0) <7>ISO 9660 Extensions: Microsoft Joliet Level 3 <7>ISO 9660 Extensions: RRIP_1991A <6>8139too Fast Ethernet driver 0.9.24 <6>eth0: RealTek RTL8139 Fast Ethernet at 0xe29a8000, 00:40:95:30:2e:5e, IRQ 10 <7>eth0: Identified 8139 chip type 'RTL-8139C' <4>VFS: Mounted root (ext2 filesystem) readonly. <4>change_root: old root has d_count=14 <5>Trying to unmount old root ... okay <4>Freeing unused kernel memory: 120k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. Kernel logging (ksyslog) stopped. Kernel log daemon terminating. <notice>killproc: kill(170,29) <notice>killproc: kill(170,3) Boot logging started on /dev/tty1(/dev/console) at Sun Dec 1 16:07:08 2002 Master Resource Control: previous runlevel: N, switching to runlevel: 3 Initializing random number generator<notice>/etc/init.d/rc3.d/S01random start done Starting syslog services<notice>'/etc/init.d/rc3.d/S01random start' exits with status 0 <notice>/etc/init.d/rc3.d/S01syslog start <notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ SuSE=,1207300200,ADCA5F1C., HOSTNAME=Rescue CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux rescue=1 PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ SuSE=,1207300200,ADCA5F1C., HOSTNAME=Rescue CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux rescue=1 PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/klogd ] done Starting RPC portmap daemon<notice>'/etc/init.d/rc3.d/S01syslog start' exits with status 0 <notice>/etc/init.d/rc3.d/S03portmap start <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ SuSE=,1207300200,ADCA5F1C., HOSTNAME=Rescue CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux rescue=1 PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/portmap ] done Starting Name Service Cache Daemon<notice>'/etc/init.d/rc3.d/S03portmap start' exits with status 0 <notice>/etc/init.d/rc3.d/S04nfs start <notice>'/etc/init.d/rc3.d/S04nfs start' exits with status 0 <notice>/etc/init.d/rc3.d/S06nscd start <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ SuSE=,1207300200,ADCA5F1C., HOSTNAME=Rescue CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N REDIRECT=/dev/tty1 initrd=initrd MACHTYPE=i386-suse-linux expert=0 LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux rescue=1 PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done Master Resource Control: runlevel 3 has been reached <notice>'/etc/init.d/rc3.d/S06nscd start' exits with status 0 <notice>killproc: kill(305,3) Danke für die Hilfe.... CU

3 3