reipl - en to unknown language translation catalogue (37 entries)

en: This machine does not support reipl!
target: Denne maskine underst��tter ikke reipl!

en: Configured reipl methods
target: Konfigurerede reipl-metoder

en: The method ccw is configured and being used.
target: Metoden ccw er konfigureret og bliver brugt.

en: The method ccw is configured.
target: Metoden ccw er konfigureret.

en: The method ccw is not supported.
target: metoden ccw underst��ttes ikke.

en: The method fcp is configured and being used.
target: Metoden fcp er konfigureret og bliver brugt.

en: The method fcp is configured.
target: Metoden fcp er konfigureret.

en: The method fcp is not supported.
target: Metoden fcp underst��ttes ikke.

note: Reipl configure dialog caption Initialization dialog caption
en: Reipl Configuration
target: Reipl-konfiguration

en: reipl methods
target: reipl-metoder

en: ccw parameters
target: ccw-parametre

en: &Device
target: Enhe&d

en: fcp parameters
target: fcp-parametre

en: D&evice
target: &Enhed

en: &World wide port number
target: &Verdensomsp��ndende portnummer

en: Lo&gical unit number
target: Lo&gisk enhedsnummer

en: B&oot program selector
target: B&ootprogramv��lger

en: Boo&t record logical block address
target: Boo&tregisters logiske blokadresse

en: reipl configuration
target: reipl-konfiguration

en: help missing in helps.ycp
target: hj��lp mangler i helps.ycp

note: Read dialog help 1/2
en: <p><b><big>Initializing reipl Configuration</big></b><br>
    Please wait...<br></p>
target: <p><b><big>Initialiserer reipl-konfiguration</big></b><br>
    Vent venligst...<br></p>

note: Read dialog help 2/2
en: <p><b><big>Aborting Initialization:</big></b><br>
    Safely abort the configuration utility by pressing <b>Abort</b> now.</p>
target: <p><b><big>Afbryde initialisering:</big></b><br>
    Du kan trygt afbryde konfigurationsv��rkt��jet ved at trykke p�� <b>Afbryd</b> nu.</p>

note: Write dialog help 1/2
en: <p><b><big>Saving reipl Configuration</big></b><br>
    Please wait...<br></p>
target: <p><b><big>Gemmer reipl-konfiguration</big></b><br>
    Vent venligst...<br></p>

note: Write dialog help 2/2
en: <p><b><big>Aborting Saving:</big></b><br>
    Abort the save procedure by pressing <b>Abort</b>.
    An additional dialog informs whether it is safe to do so.
    </p>
target: <p><b><big>Afbryde gemmeprocessen:</big></b><br>
    Afbryd gemmeproceduren ved at trykke p�� <b>Afbryd</b>.
    En yderligere dialog informerer, om det er sikkert at g��re det.
    </p>

note: Configure dialog help 1
en: <p><b><big>s390 reIPL Configuration</big></b></p>
target: <p><b><big>s390 reIPL-konfiguration</big></b></p>

note: Configure dialog help 2
en: <p>Choose one of the methods to reboot your machine with the radio buttons
    listed inside <b>reipl methods</b>. Depending on what your machine supports,
    you can choose between CCW (channel command word) devices and SCSI devices,
    that are attached through zFCP (fibre channel protocol). Then fill out the
    necessary parameter entry fields for the respective method.</p>
target: <p>V��lg en af metoderne, til at genstarte din maskine, med radioknapperne,
    der vises i <b>reipl-metoder</b>. Afh��ngigt af hvad din maskine underst��tter,
    kan du v��lge mellem enhederne CCW (channel command word) og SCSI, der er
    tilsluttet gennem zFCP (fibre channel protocol). Fyld s�� indgangsfelterne ud med
    de n��dvendige parametre for den respektive metode.</p>

note: Configure dialog help 3
en: <p>The <b>device</b> must be a valid device bus ID with lower case letters
    in a sysfs compatible format 0.<i>&lt;subchannel set ID&gt;</i>.<i>&lt;device ID&gt;</i>,
    such as 0.0.5c51. Depending on the chosen method, this can either refer to a DASD or to
    an FCP adapter.</p>
target: <p><b>Enhed</b> skal v��re en gyldig enhedsbus-ID med sm�� bogstaver i et
    sysfs-kompatibelt format 0.<i>&lt;subkanals��t-ID&gt;</i>.<i>&lt;enheds-ID&gt;</i>,
    som f.eks. 0.0.5c51. Afh��ngigt af den valgte metode kan det henvise til en DASD- eller
    en FCP-adapter.</p>

note: Configure dialog help 4
en: <p>The <b>loadparm</b> must be a maximum of 8 characters and selects a boot
    configuration from the menu of the zipl bootloader. Use one blank character
    to select the default configuration.</p>
target: <p><b>loadparm</b> m�� have maks. 8 tegn og v��lger en boot-konfiguration
    fra zipl-bootloaderens menu. Brug ��t blankt tegn for at v��lge standard
    konfigurationen.</p>

note: Configure dialog help 5
en: <p>The <b>world wide port number</b> (WWPN) must be entered with lowercase
    letters as a 16-digit hex value, such as 0x5005076300c40e5a.</p>
target: <p>Det <b>verdensomsp��ndende portnummer</b> (WWPN) skal angives med sm��
    bogstaver som en 16-cifret hex-v��rdi som f.eks. 0x5005076300c40e5a.</p>

note: Configure dialog help 6
en: <p>The <b>logical unit number</b> (LUN) must be entered with lowercase letters
    as a 16-digit hex value with all trailing zeros, such as 0x52ca000000000000.</p>
target: <p>Det <b>logiske enhedsnummer</b> (LUN) skal angives med sm�� bogstaver som
    en 16-cifret hex-v��rdi med alle efterf��lgende nuller som f.eks. 0x52ca000000000000.</p>

note: Configure dialog help 7
en: <p>The <b>boot program selector</b> must be a non-negative integer choosing
    a boot configuration from the menu of the zipl bootloader. Use 0 to select
    the default configuration.</p>
target: <p><b>Bootprogramv��lgeren</b> skal v��re et ikke-negativt heltal, der v��lger
    en boot-konfiguration fra zipl-bootloaderens menu. Brug 0 for at v��lge standard
    konfigurationen.</p>

note: Configure dialog help 8
en: <p>The <b>boot record logical block address</b> (LBA) specifies the master
    boot record and is currently always 0.</p>
target: <p><b>Bootregisterets logiske blokadresse</b> (LBA) angiver master
    boot record (MBR) og er for tiden altid 0.</p>

note: Configure dialog help 9
en: <p>After confirmation of this dialog, you may trigger a reboot, e.g. by shutdown,
    and the system will automatically restart from your specified device.</p>
target: <p>Efter bekr��ftelse af denne dialog, kan du udl��se en genstart (f.eks. ved en
    nedlukning), og systemet vil automatisk genstarte fra enheden, du har angivet.</p>

note: Command line help text for the Xreipl module
en: Configuration of reipl
target: Konfiguration af reipl

note: TRANSLATORS: part of a shutdown message %1 is replaced with a device name Newline at the end is required
en: After shutdown, reload the system
    with an IPL from DASD '%1'.
target: Genindl��s systemet efter en nedlukning
    med en IPL fra DASD '%1'.

note: TRANSLATORS: part of a shutdown message %1 is replaced with a FCP name %2 is replaced with a WWPN name %3 is replaced with a LUN name Newline at the end is required
en: After shutdown, reload the system
    with an IPL from FCP '%1' with WWPN '%2'
    and LUN '%3'.
target: Genindl��s systemet efter en nedlukning
    med en IPL fra FCP '%1' med WWPN '%2'
    og LUN '%3'.

note: Initialization dialog contents
en: Initializing...
target: Initialiserer...
