December 2017 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-RU-2017:3209-1: Recommended update for openvswitch
by maintenance＠opensuse.org 03 Dec '17

03 Dec '17

openSUSE Recommended Update: Recommended update for openvswitch ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3209-1 Rating: low References: #1002734 #1009682 #1050896 Affected Products: openSUSE Leap 42.2 ______________________________________________________________________________ An update that has three recommended fixes can now be installed. Description: This update for openvswitch provides the following fixes: - Strip off encapsulation offload indications when packets are decapsulated. (bsc#1009682) - Do not restart the openvswitch service after a package update. Restarting it may interrupt connectivity so let the user decide when is the best time for such action. (bsc#1002734) - Do not stop the systemd service on package removals as this can break networking. Moreover, this allows easier updates to more recent openvswitch releases without connectivity problems. (bsc#1050896) This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1338=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.2 (i586 x86_64): openvswitch-2.5.1-2.3.1 openvswitch-debuginfo-2.5.1-2.3.1 openvswitch-debugsource-2.5.1-2.3.1 openvswitch-devel-2.5.1-2.3.1 openvswitch-dpdk-2.5.1-2.3.1 openvswitch-dpdk-debuginfo-2.5.1-2.3.1 openvswitch-dpdk-debugsource-2.5.1-2.3.1 openvswitch-dpdk-devel-2.5.1-2.3.1 openvswitch-dpdk-ovn-2.5.1-2.3.1 openvswitch-dpdk-ovn-debuginfo-2.5.1-2.3.1 openvswitch-dpdk-pki-2.5.1-2.3.1 openvswitch-dpdk-switch-2.5.1-2.3.1 openvswitch-dpdk-switch-debuginfo-2.5.1-2.3.1 openvswitch-dpdk-test-2.5.1-2.3.1 openvswitch-dpdk-test-debuginfo-2.5.1-2.3.1 openvswitch-dpdk-vtep-2.5.1-2.3.1 openvswitch-dpdk-vtep-debuginfo-2.5.1-2.3.1 openvswitch-ovn-2.5.1-2.3.1 openvswitch-ovn-debuginfo-2.5.1-2.3.1 openvswitch-pki-2.5.1-2.3.1 openvswitch-switch-2.5.1-2.3.1 openvswitch-switch-debuginfo-2.5.1-2.3.1 openvswitch-test-2.5.1-2.3.1 openvswitch-test-debuginfo-2.5.1-2.3.1 openvswitch-vtep-2.5.1-2.3.1 openvswitch-vtep-debuginfo-2.5.1-2.3.1 python-openvswitch-2.5.1-2.3.1 python-openvswitch-test-2.5.1-2.3.1 References: https://bugzilla.suse.com/1002734 https://bugzilla.suse.com/1009682 https://bugzilla.suse.com/1050896

1 0

openSUSE-RU-2017:3208-1: Recommended update for libtool
by maintenance＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Recommended Update: Recommended update for libtool ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3208-1 Rating: low References: #1056381 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for libtool provides the following fix: - Add missing dependencies and provides to baselibs.conf to make sure libltdl libraries are properly installed. (bsc#1056381) This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1329=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1329=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): libltdl7-2.4.2-22.1 libltdl7-debuginfo-2.4.2-22.1 libtool-2.4.2-22.1 libtool-debugsource-2.4.2-22.1 - openSUSE Leap 42.3 (x86_64): libltdl7-32bit-2.4.2-22.1 libltdl7-debuginfo-32bit-2.4.2-22.1 libtool-32bit-2.4.2-22.1 - openSUSE Leap 42.2 (i586 x86_64): libltdl7-2.4.2-18.6.1 libltdl7-debuginfo-2.4.2-18.6.1 libtool-2.4.2-18.6.1 libtool-debugsource-2.4.2-18.6.1 - openSUSE Leap 42.2 (x86_64): libltdl7-32bit-2.4.2-18.6.1 libltdl7-debuginfo-32bit-2.4.2-18.6.1 libtool-32bit-2.4.2-18.6.1 References: https://bugzilla.suse.com/1056381

1 0

openSUSE-RU-2017:3207-1: moderate: Recommended update for open-vm-tools
by maintenance＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Recommended Update: Recommended update for open-vm-tools ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3207-1 Rating: moderate References: #1051627 #1051977 #1052129 #1054800 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has four recommended fixes can now be installed. Description: This update provides open-vm-tools 10.1.10, bringing the following fixes and enhancements: - Fix setting the screen resolution under Wayland environments. (bsc#1054800) - Map certain PAM errors to VGAUTH_E_AUTHENTICATION_DENIED. - Fix timesync state to be uncalibrated when adjustment is larger than 60ms. - Fix a crash when the VSS provider is not installed. - Add support for the new copy and paste selection target named "text/rtf". - Previously Common Agent Framework (CAF) builds were linking against specific versions of PCRE and libiconv. That restriction has been removed. - Reverts a fix that was causing intermittent hangs during soft reboots of some Linux VMs. - Fix a problem that was causing VMs to freeze during snapshots. (bsc#1051627) This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1334=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (x86_64): libvmtools-devel-10.1.10-4.1 libvmtools0-10.1.10-4.1 libvmtools0-debuginfo-10.1.10-4.1 open-vm-tools-10.1.10-4.1 open-vm-tools-debuginfo-10.1.10-4.1 open-vm-tools-debugsource-10.1.10-4.1 open-vm-tools-desktop-10.1.10-4.1 open-vm-tools-desktop-debuginfo-10.1.10-4.1 References: https://bugzilla.suse.com/1051627 https://bugzilla.suse.com/1051977 https://bugzilla.suse.com/1052129 https://bugzilla.suse.com/1054800

1 0

openSUSE-RU-2017:3206-1: Recommended update for zip
by maintenance＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Recommended Update: Recommended update for zip ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3206-1 Rating: low References: #1068346 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for zip provides the following fix: - Fix memory leaks when appending files (bsc#1068346) This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1331=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1331=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): zip-3.0-22.1 zip-debuginfo-3.0-22.1 zip-debugsource-3.0-22.1 - openSUSE Leap 42.2 (i586 x86_64): zip-3.0-19.3.1 zip-debuginfo-3.0-19.3.1 zip-debugsource-3.0-19.3.1 References: https://bugzilla.suse.com/1068346

1 0

openSUSE-RU-2017:3205-1: Recommended update for cryptctl
by maintenance＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Recommended Update: Recommended update for cryptctl ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3205-1 Rating: low References: #1056082 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update of cryptctl to version 2.3 provides the following enhancement: - Allow system administrators to issue mount/umount commands to client computers via key server. (bsc#1056082, fate#322292) This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1335=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (x86_64): cryptctl-2.3-3.1 cryptctl-debuginfo-2.3-3.1 cryptctl-debugsource-2.3-3.1 References: https://bugzilla.suse.com/1056082

1 0

openSUSE-RU-2017:3204-1: moderate: Recommended update for open-vm-tools
by maintenance＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Recommended Update: Recommended update for open-vm-tools ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3204-1 Rating: moderate References: #1027987 #1028866 #1031968 #1051627 #1051977 #1052129 #1054800 Affected Products: openSUSE Leap 42.2 ______________________________________________________________________________ An update that has 7 recommended fixes can now be installed. Description: This update provides open-vm-tools 10.1.10, bringing the following fixes and enhancements: - Fix setting the screen resolution under Wayland environments. (bsc#1054800) - Map certain PAM errors to VGAUTH_E_AUTHENTICATION_DENIED. - Fix timesync state to be uncalibrated when adjustment is larger than 60ms. - Fix a crash when the VSS provider is not installed. - Add support for the new copy and paste selection target named "text/rtf". - Previously Common Agent Framework (CAF) builds were linking against specific versions of PCRE and libiconv. That restriction has been removed. - Reverts a fix that was causing intermittent hangs during soft reboots of some Linux VMs. - Fix a problem that was causing VMs to freeze during snapshots. (bsc#1051627) - Fix unowned /var/lib/vmware directory, which was causing the vgauthd service initialization to fail. (bsc#1028866) - Fix a package dependency for open-vm-tools on libvmtools0. (bsc#1031968) - Fix a build failure caused by an upstream glibc change requiring the explicit inclusion of sys/sysmacros.h - Fix reporting authentication failures. - Make it possible to backup virtual machines with active Docker containers. This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1333=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.2 (x86_64): libvmtools-devel-10.1.10-2.6.1 libvmtools0-10.1.10-2.6.1 libvmtools0-debuginfo-10.1.10-2.6.1 open-vm-tools-10.1.10-2.6.1 open-vm-tools-debuginfo-10.1.10-2.6.1 open-vm-tools-debugsource-10.1.10-2.6.1 open-vm-tools-desktop-10.1.10-2.6.1 open-vm-tools-desktop-debuginfo-10.1.10-2.6.1 References: https://bugzilla.suse.com/1027987 https://bugzilla.suse.com/1028866 https://bugzilla.suse.com/1031968 https://bugzilla.suse.com/1051627 https://bugzilla.suse.com/1051977 https://bugzilla.suse.com/1052129 https://bugzilla.suse.com/1054800

1 0

openSUSE-SU-2017:3203-1: moderate: Security update for tor
by opensuse-security＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Security Update: Security update for tor ______________________________________________________________________________ Announcement ID: openSUSE-SU-2017:3203-1 Rating: moderate References: #1070849 Cross-References: CVE-2017-8819 CVE-2017-8820 CVE-2017-8821 CVE-2017-8822 CVE-2017-8823 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that fixes 5 vulnerabilities is now available. Description: This update for tor fixes vulnerabilities that allowed some traffic confirmation, DoS and other attacks (bsc#1070849): - CVE-2017-8819: Replay-cache ineffective for v2 onion services - CVE-2017-8820: Remote DoS attack against directory authorities - CVE-2017-8821: An attacker can make Tor ask for a password - CVE-2017-8822: Relays can pick themselves in a circuit path - CVE-2017-8823: Use-after-free in onion service v2 Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1336=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1336=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): tor-0.3.0.13-9.1 tor-debuginfo-0.3.0.13-9.1 tor-debugsource-0.3.0.13-9.1 - openSUSE Leap 42.2 (i586 x86_64): tor-0.2.9.14-8.12.1 tor-debuginfo-0.2.9.14-8.12.1 tor-debugsource-0.2.9.14-8.12.1 References: https://www.suse.com/security/cve/CVE-2017-8819.html https://www.suse.com/security/cve/CVE-2017-8820.html https://www.suse.com/security/cve/CVE-2017-8821.html https://www.suse.com/security/cve/CVE-2017-8822.html https://www.suse.com/security/cve/CVE-2017-8823.html https://bugzilla.suse.com/1070849

1 0

openSUSE-SU-2017:3202-1: Security update for wireshark
by opensuse-security＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Security Update: Security update for wireshark ______________________________________________________________________________ Announcement ID: openSUSE-SU-2017:3202-1 Rating: low References: #1070727 Cross-References: CVE-2017-17083 CVE-2017-17084 CVE-2017-17085 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that fixes three vulnerabilities is now available. Description: This update for wireshark to version 2.2.11 fixes the following issues: Minor vulnerabilities that could be used to trigger dissector crashes by making Wireshark read specially crafted packages from the network or capture files (boo#1070727): - CVE-2017-17084: IWARP_MPA dissector crash (wnpa-sec-2017-47) - CVE-2017-17083: NetBIOS dissector crash (wnpa-sec-2017-48) - CVE-2017-17085: CIP Safety dissector crash (wnpa-sec-2017-49) This update also fixes further bugs and updates protocol support as listed in: https://www.wireshark.org/docs/relnotes/wireshark-2.2.11.html Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1337=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1337=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (x86_64): wireshark-2.2.11-28.1 wireshark-debuginfo-2.2.11-28.1 wireshark-debugsource-2.2.11-28.1 wireshark-devel-2.2.11-28.1 wireshark-ui-gtk-2.2.11-28.1 wireshark-ui-gtk-debuginfo-2.2.11-28.1 wireshark-ui-qt-2.2.11-28.1 wireshark-ui-qt-debuginfo-2.2.11-28.1 - openSUSE Leap 42.2 (x86_64): wireshark-2.2.11-14.20.1 wireshark-debuginfo-2.2.11-14.20.1 wireshark-debugsource-2.2.11-14.20.1 wireshark-devel-2.2.11-14.20.1 wireshark-ui-gtk-2.2.11-14.20.1 wireshark-ui-gtk-debuginfo-2.2.11-14.20.1 wireshark-ui-qt-2.2.11-14.20.1 wireshark-ui-qt-debuginfo-2.2.11-14.20.1 References: https://www.suse.com/security/cve/CVE-2017-17083.html https://www.suse.com/security/cve/CVE-2017-17084.html https://www.suse.com/security/cve/CVE-2017-17085.html https://bugzilla.suse.com/1070727

1 0

openSUSE-SU-2017:3201-1: moderate: Security update for tor
by opensuse-security＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Security Update: Security update for tor ______________________________________________________________________________ Announcement ID: openSUSE-SU-2017:3201-1 Rating: moderate References: #1070849 Cross-References: CVE-2017-8819 CVE-2017-8820 CVE-2017-8821 CVE-2017-8822 CVE-2017-8823 Affected Products: SUSE Package Hub for SUSE Linux Enterprise 12 ______________________________________________________________________________ An update that fixes 5 vulnerabilities is now available. Description: This update for tor fixes vulnerabilities that allowed some traffic confirmation, DoS and other attacks (bsc#1070849): - CVE-2017-8819: Replay-cache ineffective for v2 onion services - CVE-2017-8820: Remote DoS attack against directory authorities - CVE-2017-8821: An attacker can make Tor ask for a password - CVE-2017-8822: Relays can pick themselves in a circuit path - CVE-2017-8823: Use-after-free in onion service v2 Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - SUSE Package Hub for SUSE Linux Enterprise 12: zypper in -t patch openSUSE-2017-1336=1 To bring your system up-to-date, use "zypper patch". Package List: - SUSE Package Hub for SUSE Linux Enterprise 12 (aarch64 ppc64le s390x x86_64): tor-0.3.1.9-8.1 tor-debuginfo-0.3.1.9-8.1 tor-debugsource-0.3.1.9-8.1 References: https://www.suse.com/security/cve/CVE-2017-8819.html https://www.suse.com/security/cve/CVE-2017-8820.html https://www.suse.com/security/cve/CVE-2017-8821.html https://www.suse.com/security/cve/CVE-2017-8822.html https://www.suse.com/security/cve/CVE-2017-8823.html https://bugzilla.suse.com/1070849

1 0

openSUSE-RU-2017:3200-1: Recommended update for coreutils
by maintenance＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Recommended Update: Recommended update for coreutils ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3200-1 Rating: low References: #1026567 #1043059 #965780 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that has three recommended fixes can now be installed. Description: This update for coreutils provides the following fixes: - Fix df(1) to no longer interact with excluded file system types, so for example specifying -x nfs no longer hangs with problematic nfs mounts. (bsc#1026567) - Ensure df -l no longer interacts with dummy file system types, so for example no longer hangs with problematic NFS mounted via system.automount(5). (bsc#1043059) - Significantly speed up df(1) for huge mount lists. (bsc#965780) This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1328=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1328=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): coreutils-8.25-5.1 coreutils-debuginfo-8.25-5.1 coreutils-debugsource-8.25-5.1 - openSUSE Leap 42.3 (noarch): coreutils-lang-8.25-5.1 - openSUSE Leap 42.3 (x86_64): coreutils-testsuite-8.25-5.1 - openSUSE Leap 42.2 (i586 x86_64): coreutils-8.25-2.3.1 coreutils-debuginfo-8.25-2.3.1 coreutils-debugsource-8.25-2.3.1 - openSUSE Leap 42.2 (noarch): coreutils-lang-8.25-2.3.1 - openSUSE Leap 42.2 (x86_64): coreutils-testsuite-8.25-2.3.1 References: https://bugzilla.suse.com/1026567 https://bugzilla.suse.com/1043059 https://bugzilla.suse.com/965780

1 0

openSUSE-SU-2017:3199-1: moderate: Security update for binutils
by opensuse-security＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Security Update: Security update for binutils ______________________________________________________________________________ Announcement ID: openSUSE-SU-2017:3199-1 Rating: moderate References: #1003846 #1025282 #1029907 #1029908 #1029909 #1029995 #1030296 #1030297 #1030298 #1030583 #1030584 #1030585 #1030588 #1030589 #1031590 #1031593 #1031595 #1031638 #1031644 #1031656 #1033122 #1037052 #1037057 #1037061 #1037062 #1037066 #1037070 #1037072 #1037273 #1038874 #1038875 #1038876 #1038877 #1038878 #1038880 #1038881 #1044891 #1044897 #1044901 #1044909 #1044925 #1044927 #1046094 #1052061 #1052496 #1052503 #1052507 #1052509 #1052511 #1052514 #1052518 #1053347 #1056312 #1056437 #1057139 #1057144 #1057149 #1058480 #1059050 #1060599 #1060621 #1061241 #437293 #445037 #546106 #561142 #578249 #590820 #691290 #698346 #713504 #776968 #863764 #938658 #970239 Cross-References: CVE-2014-9939 CVE-2017-12448 CVE-2017-12450 CVE-2017-12452 CVE-2017-12453 CVE-2017-12454 CVE-2017-12456 CVE-2017-12799 CVE-2017-13757 CVE-2017-14128 CVE-2017-14129 CVE-2017-14130 CVE-2017-14333 CVE-2017-14529 CVE-2017-14729 CVE-2017-14745 CVE-2017-14974 CVE-2017-6965 CVE-2017-6966 CVE-2017-6969 CVE-2017-7209 CVE-2017-7210 CVE-2017-7223 CVE-2017-7224 CVE-2017-7225 CVE-2017-7226 CVE-2017-7227 CVE-2017-7299 CVE-2017-7300 CVE-2017-7301 CVE-2017-7302 CVE-2017-7303 CVE-2017-7304 CVE-2017-7614 CVE-2017-8392 CVE-2017-8393 CVE-2017-8394 CVE-2017-8395 CVE-2017-8396 CVE-2017-8397 CVE-2017-8398 CVE-2017-8421 CVE-2017-9038 CVE-2017-9039 CVE-2017-9040 CVE-2017-9041 CVE-2017-9042 CVE-2017-9043 CVE-2017-9044 CVE-2017-9746 CVE-2017-9747 CVE-2017-9748 CVE-2017-9750 CVE-2017-9755 CVE-2017-9756 CVE-2017-9954 CVE-2017-9955 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that solves 57 vulnerabilities and has 18 fixes is now available. Description: GNU binutil was updated to the 2.29.1 release, bringing various new features, fixing a lot of bugs and security issues. Following security issues are being addressed by this release: * 18750 bsc#1030296 CVE-2014-9939 * 20891 bsc#1030585 CVE-2017-7225 * 20892 bsc#1030588 CVE-2017-7224 * 20898 bsc#1030589 CVE-2017-7223 * 20905 bsc#1030584 CVE-2017-7226 * 20908 bsc#1031644 CVE-2017-7299 * 20909 bsc#1031656 CVE-2017-7300 * 20921 bsc#1031595 CVE-2017-7302 * 20922 bsc#1031593 CVE-2017-7303 * 20924 bsc#1031638 CVE-2017-7301 * 20931 bsc#1031590 CVE-2017-7304 * 21135 bsc#1030298 CVE-2017-7209 * 21137 bsc#1029909 CVE-2017-6965 * 21139 bsc#1029908 CVE-2017-6966 * 21156 bsc#1029907 CVE-2017-6969 * 21157 bsc#1030297 CVE-2017-7210 * 21409 bsc#1037052 CVE-2017-8392 * 21412 bsc#1037057 CVE-2017-8393 * 21414 bsc#1037061 CVE-2017-8394 * 21432 bsc#1037066 CVE-2017-8396 * 21440 bsc#1037273 CVE-2017-8421 * 21580 bsc#1044891 CVE-2017-9746 * 21581 bsc#1044897 CVE-2017-9747 * 21582 bsc#1044901 CVE-2017-9748 * 21587 bsc#1044909 CVE-2017-9750 * 21594 bsc#1044925 CVE-2017-9755 * 21595 bsc#1044927 CVE-2017-9756 * 21787 bsc#1052518 CVE-2017-12448 * 21813 bsc#1052503, CVE-2017-12456, bsc#1052507, CVE-2017-12454, bsc#1052509, CVE-2017-12453, bsc#1052511, CVE-2017-12452, bsc#1052514, CVE-2017-12450, bsc#1052503, CVE-2017-12456, bsc#1052507, CVE-2017-12454, bsc#1052509, CVE-2017-12453, bsc#1052511, CVE-2017-12452, bsc#1052514, CVE-2017-12450 * 21933 bsc#1053347 CVE-2017-12799 * 21990 bsc#1058480 CVE-2017-14333 * 22018 bsc#1056312 CVE-2017-13757 * 22047 bsc#1057144 CVE-2017-14129 * 22058 bsc#1057149 CVE-2017-14130 * 22059 bsc#1057139 CVE-2017-14128 * 22113 bsc#1059050 CVE-2017-14529 * 22148 bsc#1060599 CVE-2017-14745 * 22163 bsc#1061241 CVE-2017-14974 * 22170 bsc#1060621 CVE-2017-14729 Update to binutils 2.29. [fate#321454, fate#321494, fate#323293]: * The MIPS port now supports microMIPS eXtended Physical Addressing (XPA) instructions for assembly and disassembly. * The MIPS port now supports the microMIPS Release 5 ISA for assembly and disassembly. * The MIPS port now supports the Imagination interAptiv MR2 processor, which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple of implementation-specific regular MIPS and MIPS16e2 ASE instructions. * The SPARC port now supports the SPARC M8 processor, which implements the Oracle SPARC Architecture 2017. * The MIPS port now supports the MIPS16e2 ASE for assembly and disassembly. * Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * Add support for the wasm32 ELF conversion of the WebAssembly file format. * Add --inlines option to objdump, which extends the --line-numbers option so that inlined functions will display their nesting information. * Add --merge-notes options to objcopy to reduce the size of notes in a binary file by merging and deleting redundant notes. * Add support for locating separate debug info files using the build-id method, where the separate file has a name based upon the build-id of the original file. - GAS specific: * Add support for ELF SHF_GNU_MBIND. * Add support for the WebAssembly file format and wasm32 ELF conversion. * PowerPC gas now checks that the correct register class is used in instructions. For instance, "addi %f4,%cr3,%r31" warns three times that the registers are invalid. * Add support for the Texas Instruments PRU processor. * Support for the ARMv8-R architecture and Cortex-R52 processor has been added to the ARM port. - GNU ld specific: * Support for -z shstk in the x86 ELF linker to generate GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program properties. * Add support for GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program properties in the x86 ELF linker. * Add support for GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program properties in the x86 ELF linker. * Support for -z ibtplt in the x86 ELF linker to generate IBT-enabled PLT. * Support for -z ibt in the x86 ELF linker to generate IBT-enabled PLT as well as GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program properties. * Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * Add support for ELF GNU program properties. * Add support for the Texas Instruments PRU processor. * When configuring for arc*-*-linux* targets the default linker emulation will change if --with-cpu=nps400 is used at configure time. * Improve assignment of LMAs to orphan sections in some edge cases where a mixture of both AT>LMA_REGION and AT(LMA) are used. * Orphan sections placed after an empty section that has an AT(LMA) will now take an load memory address starting from LMA. * Section groups can now be resolved (the group deleted and the group members placed like normal sections) at partial link time either using the new linker option --force-group-allocation or by placing FORCE_GROUP_ALLOCATION into the linker script. - Add riscv64 target, tested with gcc7 and downstream newlib 2.4.0 - Prepare riscv32 target (gh#riscv/riscv-newlib#8) - Make compressed debug section handling explicit, disable for old products and enable for gas on all architectures otherwise. [bsc#1029995] - Remove empty rpath component removal optimization from to workaround CMake rpath handling. [bsc#1025282] Minor security bugs fixed: PR 21147, PR 21148, PR 21149, PR 21150, PR 21151, PR 21155, PR 21158, PR 21159 - Update to binutils 2.28. * Add support for locating separate debug info files using the build-id method, where the separate file has a name based upon the build-id of the original file. * This version of binutils fixes a problem with PowerPC VLE 16A and 16D relocations which were functionally swapped, for example, R_PPC_VLE_HA16A performed like R_PPC_VLE_HA16D while R_PPC_VLE_HA16D performed like R_PPC_VLE_HA16A. This could have been fixed by renumbering relocations, which would keep object files created by an older version of gas compatible with a newer ld. However, that would require an ABI update, affecting other assemblers and linkers that create and process the relocations correctly. It is recommended that all VLE object files be recompiled, but ld can modify the relocations if --vle-reloc-fixup is passed to ld. If the new ld command line option is not used, ld will ld warn on finding relocations inconsistent with the instructions being relocated. * The nm program has a new command line option (--with-version-strings) which will display a symbol's version information, if any, after the symbol's name. * The ARC port of objdump now accepts a -M option to specify the extra instruction class(es) that should be disassembled. * The --remove-section option for objcopy and strip now accepts section patterns starting with an exclamation point to indicate a non-matching section. A non-matching section is removed from the set of sections matched by an earlier --remove-section pattern. * The --only-section option for objcopy now accepts section patterns starting with an exclamation point to indicate a non-matching section. A non-matching section is removed from the set of sections matched by an earlier --only-section pattern. * New --remove-relocations=SECTIONPATTERN option for objcopy and strip. This option can be used to remove sections containing relocations. The SECTIONPATTERN is the section to which the relocations apply, not the relocation section itself. - GAS specific: * Add support for the RISC-V architecture. * Add support for the ARM Cortex-M23 and Cortex-M33 processors. - GNU ld specific: * The EXCLUDE_FILE linker script construct can now be applied outside of the section list in order for the exclusions to apply over all input sections in the list. * Add support for the RISC-V architecture. * The command line option --no-eh-frame-hdr can now be used in ELF based linkers to disable the automatic generation of .eh_frame_hdr sections. * Add --in-implib=<infile> to the ARM linker to enable specifying a set of Secure Gateway veneers that must exist in the output import library specified by --out-implib=<outfile> and the address they must have. As such, --in-implib is only supported in combination with --cmse-implib. * Extended the --out-implib=<file> option, previously restricted to x86 PE targets, to any ELF based target. This allows the generation of an import library for an ELF executable, which can then be used by another application to link against the executable. - GOLD specific: * Add -z bndplt option (x86-64 only) to support Intel MPX. * Add --orphan-handling option. * Add --stub-group-multi option (PowerPC only). * Add --target1-rel, --target1-abs, --target2 options (Arm only). * Add -z stack-size option. * Add --be8 option (Arm only). * Add HIDDEN support in linker scripts. * Add SORT_BY_INIT_PRIORITY support in linker scripts. - Other fixes: * Fix section alignment on .gnu_debuglink. [bso#21193] * Add s390x to gold_archs. * Fix alignment frags for aarch64 (bsc#1003846) * Call ldconfig for libbfd * Fix an assembler problem with clang on ARM. * Restore monotonically increasing section offsets. - Update to binutils 2.27. * Add a configure option, --enable-64-bit-archive, to force use of a 64-bit format when creating an archive symbol index. * Add --elf-stt-common= option to objcopy for ELF targets to control whether to convert common symbols to the STT_COMMON type. - GAS specific: * Default to --enable-compressed-debug-sections=gas for Linux/x86 targets. * Add --no-pad-sections to stop the assembler from padding the end of output sections up to their alignment boundary. * Support for the ARMv8-M architecture has been added to the ARM port. Support for the ARMv8-M Security and DSP Extensions has also been added to the ARM port. * ARC backend accepts .extInstruction, .extCondCode, .extAuxRegister, and .extCoreRegister pseudo-ops that allow an user to define custom instructions, conditional codes, auxiliary and core registers. * Add a configure option --enable-elf-stt-common to decide whether ELF assembler should generate common symbols with the STT_COMMON type by default. Default to no. * New command line option --elf-stt-common= for ELF targets to control whether to generate common symbols with the STT_COMMON type. * Add ability to set section flags and types via numeric values for ELF based targets. * Add a configure option --enable-x86-relax-relocations to decide whether x86 assembler should generate relax relocations by default. Default to yes, except for x86 Solaris targets older than Solaris 12. * New command line option -mrelax-relocations= for x86 target to control whether to generate relax relocations. * New command line option -mfence-as-lock-add=yes for x86 target to encode lfence, mfence and sfence as "lock addl $0x0, (%[re]sp)". * Add assembly-time relaxation option for ARC cpus. * Add --with-cpu=TYPE configure option for ARC gas. This allows the default cpu type to be adjusted at configure time. - GOLD specific: * Add a configure option --enable-relro to decide whether -z relro should be enabled by default. Default to yes. * Add support for s390, MIPS, AArch64, and TILE-Gx architectures. * Add support for STT_GNU_IFUNC symbols. * Add support for incremental linking (--incremental). - GNU ld specific: * Add a configure option --enable-relro to decide whether -z relro should be enabled in ELF linker by default. Default to yes for all Linux targets except FRV, HPPA, IA64 and MIPS. * Support for -z noreloc-overflow in the x86-64 ELF linker to disable relocation overflow check. * Add -z common/-z nocommon options for ELF targets to control whether to convert common symbols to the STT_COMMON type during a relocatable link. * Support for -z nodynamic-undefined-weak in the x86 ELF linker, which avoids dynamic relocations against undefined weak symbols in executable. * The NOCROSSREFSTO command was added to the linker script language. * Add --no-apply-dynamic-relocs to the AArch64 linker to do not apply link-time values for dynamic relocations. This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1330=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1330=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): binutils-2.29.1-13.1 binutils-debuginfo-2.29.1-13.1 binutils-debugsource-2.29.1-13.1 binutils-devel-2.29.1-13.1 binutils-gold-2.29.1-13.1 binutils-gold-debuginfo-2.29.1-13.1 cross-aarch64-binutils-2.29.1-13.1 cross-aarch64-binutils-debuginfo-2.29.1-13.1 cross-aarch64-binutils-debugsource-2.29.1-13.1 cross-arm-binutils-2.29.1-13.1 cross-arm-binutils-debuginfo-2.29.1-13.1 cross-arm-binutils-debugsource-2.29.1-13.1 cross-avr-binutils-2.29.1-13.1 cross-avr-binutils-debuginfo-2.29.1-13.1 cross-avr-binutils-debugsource-2.29.1-13.1 cross-hppa-binutils-2.29.1-13.1 cross-hppa-binutils-debuginfo-2.29.1-13.1 cross-hppa-binutils-debugsource-2.29.1-13.1 cross-hppa64-binutils-2.29.1-13.1 cross-hppa64-binutils-debuginfo-2.29.1-13.1 cross-hppa64-binutils-debugsource-2.29.1-13.1 cross-ia64-binutils-2.29.1-13.1 cross-ia64-binutils-debuginfo-2.29.1-13.1 cross-ia64-binutils-debugsource-2.29.1-13.1 cross-m68k-binutils-2.29.1-13.1 cross-m68k-binutils-debuginfo-2.29.1-13.1 cross-m68k-binutils-debugsource-2.29.1-13.1 cross-mips-binutils-2.29.1-13.1 cross-mips-binutils-debuginfo-2.29.1-13.1 cross-mips-binutils-debugsource-2.29.1-13.1 cross-ppc-binutils-2.29.1-13.1 cross-ppc-binutils-debuginfo-2.29.1-13.1 cross-ppc-binutils-debugsource-2.29.1-13.1 cross-ppc64-binutils-2.29.1-13.1 cross-ppc64-binutils-debuginfo-2.29.1-13.1 cross-ppc64-binutils-debugsource-2.29.1-13.1 cross-ppc64le-binutils-2.29.1-13.1 cross-ppc64le-binutils-debuginfo-2.29.1-13.1 cross-ppc64le-binutils-debugsource-2.29.1-13.1 cross-s390-binutils-2.29.1-13.1 cross-s390-binutils-debuginfo-2.29.1-13.1 cross-s390-binutils-debugsource-2.29.1-13.1 cross-s390x-binutils-2.29.1-13.1 cross-s390x-binutils-debuginfo-2.29.1-13.1 cross-s390x-binutils-debugsource-2.29.1-13.1 cross-sparc-binutils-2.29.1-13.1 cross-sparc-binutils-debuginfo-2.29.1-13.1 cross-sparc-binutils-debugsource-2.29.1-13.1 cross-sparc64-binutils-2.29.1-13.1 cross-sparc64-binutils-debuginfo-2.29.1-13.1 cross-sparc64-binutils-debugsource-2.29.1-13.1 cross-spu-binutils-2.29.1-13.1 cross-spu-binutils-debuginfo-2.29.1-13.1 cross-spu-binutils-debugsource-2.29.1-13.1 - openSUSE Leap 42.3 (x86_64): binutils-devel-32bit-2.29.1-13.1 cross-i386-binutils-2.29.1-13.1 cross-i386-binutils-debuginfo-2.29.1-13.1 cross-i386-binutils-debugsource-2.29.1-13.1 - openSUSE Leap 42.3 (i586): cross-x86_64-binutils-2.29.1-13.1 cross-x86_64-binutils-debuginfo-2.29.1-13.1 cross-x86_64-binutils-debugsource-2.29.1-13.1 - openSUSE Leap 42.2 (i586 x86_64): binutils-2.29.1-9.6.1 binutils-debuginfo-2.29.1-9.6.1 binutils-debugsource-2.29.1-9.6.1 binutils-devel-2.29.1-9.6.1 binutils-gold-2.29.1-9.6.1 binutils-gold-debuginfo-2.29.1-9.6.1 cross-aarch64-binutils-2.29.1-9.6.1 cross-aarch64-binutils-debuginfo-2.29.1-9.6.1 cross-aarch64-binutils-debugsource-2.29.1-9.6.1 cross-arm-binutils-2.29.1-9.6.1 cross-arm-binutils-debuginfo-2.29.1-9.6.1 cross-arm-binutils-debugsource-2.29.1-9.6.1 cross-avr-binutils-2.29.1-9.6.1 cross-avr-binutils-debuginfo-2.29.1-9.6.1 cross-avr-binutils-debugsource-2.29.1-9.6.1 cross-hppa-binutils-2.29.1-9.6.1 cross-hppa-binutils-debuginfo-2.29.1-9.6.1 cross-hppa-binutils-debugsource-2.29.1-9.6.1 cross-hppa64-binutils-2.29.1-9.6.1 cross-hppa64-binutils-debuginfo-2.29.1-9.6.1 cross-hppa64-binutils-debugsource-2.29.1-9.6.1 cross-ia64-binutils-2.29.1-9.6.1 cross-ia64-binutils-debuginfo-2.29.1-9.6.1 cross-ia64-binutils-debugsource-2.29.1-9.6.1 cross-m68k-binutils-2.29.1-9.6.1 cross-m68k-binutils-debuginfo-2.29.1-9.6.1 cross-m68k-binutils-debugsource-2.29.1-9.6.1 cross-mips-binutils-2.29.1-9.6.1 cross-mips-binutils-debuginfo-2.29.1-9.6.1 cross-mips-binutils-debugsource-2.29.1-9.6.1 cross-ppc-binutils-2.29.1-9.6.1 cross-ppc-binutils-debuginfo-2.29.1-9.6.1 cross-ppc-binutils-debugsource-2.29.1-9.6.1 cross-ppc64-binutils-2.29.1-9.6.1 cross-ppc64-binutils-debuginfo-2.29.1-9.6.1 cross-ppc64-binutils-debugsource-2.29.1-9.6.1 cross-ppc64le-binutils-2.29.1-9.6.1 cross-ppc64le-binutils-debuginfo-2.29.1-9.6.1 cross-ppc64le-binutils-debugsource-2.29.1-9.6.1 cross-s390-binutils-2.29.1-9.6.1 cross-s390-binutils-debuginfo-2.29.1-9.6.1 cross-s390-binutils-debugsource-2.29.1-9.6.1 cross-s390x-binutils-2.29.1-9.6.1 cross-s390x-binutils-debuginfo-2.29.1-9.6.1 cross-s390x-binutils-debugsource-2.29.1-9.6.1 cross-sparc-binutils-2.29.1-9.6.1 cross-sparc-binutils-debuginfo-2.29.1-9.6.1 cross-sparc-binutils-debugsource-2.29.1-9.6.1 cross-sparc64-binutils-2.29.1-9.6.1 cross-sparc64-binutils-debuginfo-2.29.1-9.6.1 cross-sparc64-binutils-debugsource-2.29.1-9.6.1 cross-spu-binutils-2.29.1-9.6.1 cross-spu-binutils-debuginfo-2.29.1-9.6.1 cross-spu-binutils-debugsource-2.29.1-9.6.1 - openSUSE Leap 42.2 (x86_64): binutils-devel-32bit-2.29.1-9.6.1 cross-i386-binutils-2.29.1-9.6.1 cross-i386-binutils-debuginfo-2.29.1-9.6.1 cross-i386-binutils-debugsource-2.29.1-9.6.1 - openSUSE Leap 42.2 (i586): cross-x86_64-binutils-2.29.1-9.6.1 cross-x86_64-binutils-debuginfo-2.29.1-9.6.1 cross-x86_64-binutils-debugsource-2.29.1-9.6.1 References: https://www.suse.com/security/cve/CVE-2014-9939.html https://www.suse.com/security/cve/CVE-2017-12448.html https://www.suse.com/security/cve/CVE-2017-12450.html https://www.suse.com/security/cve/CVE-2017-12452.html https://www.suse.com/security/cve/CVE-2017-12453.html https://www.suse.com/security/cve/CVE-2017-12454.html https://www.suse.com/security/cve/CVE-2017-12456.html https://www.suse.com/security/cve/CVE-2017-12799.html https://www.suse.com/security/cve/CVE-2017-13757.html https://www.suse.com/security/cve/CVE-2017-14128.html https://www.suse.com/security/cve/CVE-2017-14129.html https://www.suse.com/security/cve/CVE-2017-14130.html https://www.suse.com/security/cve/CVE-2017-14333.html https://www.suse.com/security/cve/CVE-2017-14529.html https://www.suse.com/security/cve/CVE-2017-14729.html https://www.suse.com/security/cve/CVE-2017-14745.html https://www.suse.com/security/cve/CVE-2017-14974.html https://www.suse.com/security/cve/CVE-2017-6965.html https://www.suse.com/security/cve/CVE-2017-6966.html https://www.suse.com/security/cve/CVE-2017-6969.html https://www.suse.com/security/cve/CVE-2017-7209.html https://www.suse.com/security/cve/CVE-2017-7210.html https://www.suse.com/security/cve/CVE-2017-7223.html https://www.suse.com/security/cve/CVE-2017-7224.html https://www.suse.com/security/cve/CVE-2017-7225.html https://www.suse.com/security/cve/CVE-2017-7226.html https://www.suse.com/security/cve/CVE-2017-7227.html https://www.suse.com/security/cve/CVE-2017-7299.html https://www.suse.com/security/cve/CVE-2017-7300.html https://www.suse.com/security/cve/CVE-2017-7301.html https://www.suse.com/security/cve/CVE-2017-7302.html https://www.suse.com/security/cve/CVE-2017-7303.html https://www.suse.com/security/cve/CVE-2017-7304.html https://www.suse.com/security/cve/CVE-2017-7614.html https://www.suse.com/security/cve/CVE-2017-8392.html https://www.suse.com/security/cve/CVE-2017-8393.html https://www.suse.com/security/cve/CVE-2017-8394.html https://www.suse.com/security/cve/CVE-2017-8395.html https://www.suse.com/security/cve/CVE-2017-8396.html https://www.suse.com/security/cve/CVE-2017-8397.html https://www.suse.com/security/cve/CVE-2017-8398.html https://www.suse.com/security/cve/CVE-2017-8421.html https://www.suse.com/security/cve/CVE-2017-9038.html https://www.suse.com/security/cve/CVE-2017-9039.html https://www.suse.com/security/cve/CVE-2017-9040.html https://www.suse.com/security/cve/CVE-2017-9041.html https://www.suse.com/security/cve/CVE-2017-9042.html https://www.suse.com/security/cve/CVE-2017-9043.html https://www.suse.com/security/cve/CVE-2017-9044.html https://www.suse.com/security/cve/CVE-2017-9746.html https://www.suse.com/security/cve/CVE-2017-9747.html https://www.suse.com/security/cve/CVE-2017-9748.html https://www.suse.com/security/cve/CVE-2017-9750.html https://www.suse.com/security/cve/CVE-2017-9755.html https://www.suse.com/security/cve/CVE-2017-9756.html https://www.suse.com/security/cve/CVE-2017-9954.html https://www.suse.com/security/cve/CVE-2017-9955.html https://bugzilla.suse.com/1003846 https://bugzilla.suse.com/1025282 https://bugzilla.suse.com/1029907 https://bugzilla.suse.com/1029908 https://bugzilla.suse.com/1029909 https://bugzilla.suse.com/1029995 https://bugzilla.suse.com/1030296 https://bugzilla.suse.com/1030297 https://bugzilla.suse.com/1030298 https://bugzilla.suse.com/1030583 https://bugzilla.suse.com/1030584 https://bugzilla.suse.com/1030585 https://bugzilla.suse.com/1030588 https://bugzilla.suse.com/1030589 https://bugzilla.suse.com/1031590 https://bugzilla.suse.com/1031593 https://bugzilla.suse.com/1031595 https://bugzilla.suse.com/1031638 https://bugzilla.suse.com/1031644 https://bugzilla.suse.com/1031656 https://bugzilla.suse.com/1033122 https://bugzilla.suse.com/1037052 https://bugzilla.suse.com/1037057 https://bugzilla.suse.com/1037061 https://bugzilla.suse.com/1037062 https://bugzilla.suse.com/1037066 https://bugzilla.suse.com/1037070 https://bugzilla.suse.com/1037072 https://bugzilla.suse.com/1037273 https://bugzilla.suse.com/1038874 https://bugzilla.suse.com/1038875 https://bugzilla.suse.com/1038876 https://bugzilla.suse.com/1038877 https://bugzilla.suse.com/1038878 https://bugzilla.suse.com/1038880 https://bugzilla.suse.com/1038881 https://bugzilla.suse.com/1044891 https://bugzilla.suse.com/1044897 https://bugzilla.suse.com/1044901 https://bugzilla.suse.com/1044909 https://bugzilla.suse.com/1044925 https://bugzilla.suse.com/1044927 https://bugzilla.suse.com/1046094 https://bugzilla.suse.com/1052061 https://bugzilla.suse.com/1052496 https://bugzilla.suse.com/1052503 https://bugzilla.suse.com/1052507 https://bugzilla.suse.com/1052509 https://bugzilla.suse.com/1052511 https://bugzilla.suse.com/1052514 https://bugzilla.suse.com/1052518 https://bugzilla.suse.com/1053347 https://bugzilla.suse.com/1056312 https://bugzilla.suse.com/1056437 https://bugzilla.suse.com/1057139 https://bugzilla.suse.com/1057144 https://bugzilla.suse.com/1057149 https://bugzilla.suse.com/1058480 https://bugzilla.suse.com/1059050 https://bugzilla.suse.com/1060599 https://bugzilla.suse.com/1060621 https://bugzilla.suse.com/1061241 https://bugzilla.suse.com/437293 https://bugzilla.suse.com/445037 https://bugzilla.suse.com/546106 https://bugzilla.suse.com/561142 https://bugzilla.suse.com/578249 https://bugzilla.suse.com/590820 https://bugzilla.suse.com/691290 https://bugzilla.suse.com/698346 https://bugzilla.suse.com/713504 https://bugzilla.suse.com/776968 https://bugzilla.suse.com/863764 https://bugzilla.suse.com/938658 https://bugzilla.suse.com/970239

1 0

openSUSE-SU-2017:3198-1: moderate: Security update for lynx
by opensuse-security＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Security Update: Security update for lynx ______________________________________________________________________________ Announcement ID: openSUSE-SU-2017:3198-1 Rating: moderate References: #1068885 Cross-References: CVE-2017-1000211 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for lynx fixes the following issues: Security issue fixed: - CVE-2017-1000211: Fix use after free in the HTMLparser that can resulting in memory disclosure (bsc#1068885). This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1332=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1332=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): lynx-2.8.7-11.1 lynx-debuginfo-2.8.7-11.1 lynx-debugsource-2.8.7-11.1 - openSUSE Leap 42.2 (i586 x86_64): lynx-2.8.7-8.3.1 lynx-debuginfo-2.8.7-8.3.1 lynx-debugsource-2.8.7-8.3.1 References: https://www.suse.com/security/cve/CVE-2017-1000211.html https://bugzilla.suse.com/1068885

1 0

openSUSE-RU-2017:3197-1: moderate: Recommended update for systemd
by maintenance＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Recommended Update: Recommended update for systemd ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3197-1 Rating: moderate References: #1004995 #1035386 #1039099 #1040800 #1045472 #1048605 #1050152 #1053137 #1053595 #1055641 #1063249 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that has 11 recommended fixes can now be installed. Description: This update for systemd fixes the following issues: - unit: When JobTimeoutSec= is turned off, implicitly turn off JobRunningTimeoutSec= too. (bsc#1048605, bsc#1004995) - compat-rules: Generate compat by-id symlinks with 'nvme' prefix missing and warn users that have broken symlinks. (bsc#1063249) - compat-rules: Allow to specify the generation number through the kernel command line. - scsi_id: Fixup prefix for pre-SPC inquiry reply. (bsc#1039099) - tmpfiles: Remove old ICE and X11 sockets at boot. - tmpfiles: Silently ignore any path that passes through autofs. (bsc#1045472) - pam_logind: Skip leading /dev/ from PAM_TTY field before passing it on. - shared/machine-pool: Fix another mkfs.btrfs checking. (bsc#1053595) - shutdown: Fix incorrect fscanf() result check. - shutdown: Don't remount,ro network filesystems. (bsc#1035386) - shutdown: Don't be fooled when detaching DM devices with BTRFS. (bsc#1055641) - bash-completion: Add support for --now. (bsc#1053137) - Add convert-lib-udev-path.sh script to convert /lib/udev directory into a symlink pointing to /usr/lib/udev when upgrading from SLE11. (bsc#1050152) - Add a rule to teach hotplug to offline containers transparently. (bsc#1040800) This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1325=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1325=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): libsystemd0-228-38.1 libsystemd0-debuginfo-228-38.1 libsystemd0-mini-228-38.1 libsystemd0-mini-debuginfo-228-38.1 libudev-devel-228-38.1 libudev-mini-devel-228-38.1 libudev-mini1-228-38.1 libudev-mini1-debuginfo-228-38.1 libudev1-228-38.1 libudev1-debuginfo-228-38.1 nss-myhostname-228-38.1 nss-myhostname-debuginfo-228-38.1 nss-mymachines-228-38.1 nss-mymachines-debuginfo-228-38.1 systemd-228-38.1 systemd-debuginfo-228-38.1 systemd-debugsource-228-38.1 systemd-devel-228-38.1 systemd-logger-228-38.1 systemd-mini-228-38.1 systemd-mini-debuginfo-228-38.1 systemd-mini-debugsource-228-38.1 systemd-mini-devel-228-38.1 systemd-mini-sysvinit-228-38.1 systemd-sysvinit-228-38.1 udev-228-38.1 udev-debuginfo-228-38.1 udev-mini-228-38.1 udev-mini-debuginfo-228-38.1 - openSUSE Leap 42.3 (noarch): systemd-bash-completion-228-38.1 systemd-mini-bash-completion-228-38.1 - openSUSE Leap 42.3 (x86_64): libsystemd0-32bit-228-38.1 libsystemd0-debuginfo-32bit-228-38.1 libudev1-32bit-228-38.1 libudev1-debuginfo-32bit-228-38.1 nss-myhostname-32bit-228-38.1 nss-myhostname-debuginfo-32bit-228-38.1 systemd-32bit-228-38.1 systemd-debuginfo-32bit-228-38.1 - openSUSE Leap 42.2 (i586 x86_64): libsystemd0-228-25.18.1 libsystemd0-debuginfo-228-25.18.1 libsystemd0-mini-228-25.18.1 libsystemd0-mini-debuginfo-228-25.18.1 libudev-devel-228-25.18.1 libudev-mini-devel-228-25.18.1 libudev-mini1-228-25.18.1 libudev-mini1-debuginfo-228-25.18.1 libudev1-228-25.18.1 libudev1-debuginfo-228-25.18.1 nss-myhostname-228-25.18.1 nss-myhostname-debuginfo-228-25.18.1 nss-mymachines-228-25.18.1 nss-mymachines-debuginfo-228-25.18.1 systemd-228-25.18.1 systemd-debuginfo-228-25.18.1 systemd-debugsource-228-25.18.1 systemd-devel-228-25.18.1 systemd-logger-228-25.18.1 systemd-mini-228-25.18.1 systemd-mini-debuginfo-228-25.18.1 systemd-mini-debugsource-228-25.18.1 systemd-mini-devel-228-25.18.1 systemd-mini-sysvinit-228-25.18.1 systemd-sysvinit-228-25.18.1 udev-228-25.18.1 udev-debuginfo-228-25.18.1 udev-mini-228-25.18.1 udev-mini-debuginfo-228-25.18.1 - openSUSE Leap 42.2 (x86_64): libsystemd0-32bit-228-25.18.1 libsystemd0-debuginfo-32bit-228-25.18.1 libudev1-32bit-228-25.18.1 libudev1-debuginfo-32bit-228-25.18.1 nss-myhostname-32bit-228-25.18.1 nss-myhostname-debuginfo-32bit-228-25.18.1 systemd-32bit-228-25.18.1 systemd-debuginfo-32bit-228-25.18.1 - openSUSE Leap 42.2 (noarch): systemd-bash-completion-228-25.18.1 systemd-mini-bash-completion-228-25.18.1 References: https://bugzilla.suse.com/1004995 https://bugzilla.suse.com/1035386 https://bugzilla.suse.com/1039099 https://bugzilla.suse.com/1040800 https://bugzilla.suse.com/1045472 https://bugzilla.suse.com/1048605 https://bugzilla.suse.com/1050152 https://bugzilla.suse.com/1053137 https://bugzilla.suse.com/1053595 https://bugzilla.suse.com/1055641 https://bugzilla.suse.com/1063249

1 0

openSUSE-SU-2017:3196-1: Security update for libressl
by opensuse-security＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Security Update: Security update for libressl ______________________________________________________________________________ Announcement ID: openSUSE-SU-2017:3196-1 Rating: low References: #1065363 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that contains security fixes can now be installed. Description: This update for libressl fixes the following issues: - an out-of-bounds read in the DES code may have led to an application crash (boo#1065363) Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1323=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1323=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): libcrypto41-2.5.3-8.1 libcrypto41-debuginfo-2.5.3-8.1 libressl-2.5.3-8.1 libressl-debuginfo-2.5.3-8.1 libressl-debugsource-2.5.3-8.1 libressl-devel-2.5.3-8.1 libssl43-2.5.3-8.1 libssl43-debuginfo-2.5.3-8.1 libtls15-2.5.3-8.1 libtls15-debuginfo-2.5.3-8.1 - openSUSE Leap 42.3 (x86_64): libcrypto41-32bit-2.5.3-8.1 libcrypto41-debuginfo-32bit-2.5.3-8.1 libressl-devel-32bit-2.5.3-8.1 libssl43-32bit-2.5.3-8.1 libssl43-debuginfo-32bit-2.5.3-8.1 libtls15-32bit-2.5.3-8.1 libtls15-debuginfo-32bit-2.5.3-8.1 - openSUSE Leap 42.3 (noarch): libressl-devel-doc-2.5.3-8.1 - openSUSE Leap 42.2 (i586 x86_64): libcrypto41-2.5.3-5.6.1 libcrypto41-debuginfo-2.5.3-5.6.1 libressl-2.5.3-5.6.1 libressl-debuginfo-2.5.3-5.6.1 libressl-debugsource-2.5.3-5.6.1 libressl-devel-2.5.3-5.6.1 libssl43-2.5.3-5.6.1 libssl43-debuginfo-2.5.3-5.6.1 libtls15-2.5.3-5.6.1 libtls15-debuginfo-2.5.3-5.6.1 - openSUSE Leap 42.2 (x86_64): libcrypto41-32bit-2.5.3-5.6.1 libcrypto41-debuginfo-32bit-2.5.3-5.6.1 libressl-devel-32bit-2.5.3-5.6.1 libssl43-32bit-2.5.3-5.6.1 libssl43-debuginfo-32bit-2.5.3-5.6.1 libtls15-32bit-2.5.3-5.6.1 libtls15-debuginfo-32bit-2.5.3-5.6.1 - openSUSE Leap 42.2 (noarch): libressl-devel-doc-2.5.3-5.6.1 References: https://bugzilla.suse.com/1065363

1 0

openSUSE-RU-2017:3195-1: moderate: Recommended update for cloud-init
by maintenance＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Recommended Update: Recommended update for cloud-init ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3195-1 Rating: moderate References: #1003977 #1005616 #1007529 #1017832 #1024709 #930524 #998103 #998836 #998843 #999942 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that has 10 recommended fixes can now be installed. Description: This update provides cloud-init version 0.7.8, which brings several fixes and enhancements: - Fall back to the previous method of writing network information and fix the default path for network scripts. (bsc#1007529) - Allow dmidecode usage on aarch64 systems. (bsc#1005616) - Wait for the network to be up an running in order to get ssh key injected. - Handle exception when attempting to detect if the network device is up when it is not. (bsc#1003977) - Fix decoding error. (bsc#998843) - Add missing closing bracket. (bsc#998836) - Hostname of VM instance does not change after reboot. (bsc#998103) - The service file cloud-init.service referenced networking.service which on SUSE is network.service. (bsc#999942) - Do not set mount options for ephemeral drive, use the defaults that are built into the code. (bsc#930524) - Fix path to cloud-init.target in cloud-init-generator. (bsc#1024709) - Exit with a proper error message when user attempts to use the "query" command. (bsc#1017832) - Require net-tools for network setup. For a comprehensive list of all changes please refer to the package's change log. This update was imported from the SUSE:SLE-12-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1327=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1327=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): cloud-init-0.7.8-31.1 cloud-init-config-suse-0.7.8-31.1 cloud-init-doc-0.7.8-31.1 cloud-init-test-0.7.8-31.1 - openSUSE Leap 42.2 (i586 x86_64): cloud-init-0.7.8-28.3.1 cloud-init-config-suse-0.7.8-28.3.1 cloud-init-doc-0.7.8-28.3.1 cloud-init-test-0.7.8-28.3.1 References: https://bugzilla.suse.com/1003977 https://bugzilla.suse.com/1005616 https://bugzilla.suse.com/1007529 https://bugzilla.suse.com/1017832 https://bugzilla.suse.com/1024709 https://bugzilla.suse.com/930524 https://bugzilla.suse.com/998103 https://bugzilla.suse.com/998836 https://bugzilla.suse.com/998843 https://bugzilla.suse.com/999942

1 0

openSUSE-SU-2017:3194-1: important: Security update for xen
by opensuse-security＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Security Update: Security update for xen ______________________________________________________________________________ Announcement ID: openSUSE-SU-2017:3194-1 Rating: important References: #1027519 #1055047 #1061075 #1063123 #1068187 #1068191 Cross-References: CVE-2017-15289 CVE-2017-15597 Affected Products: openSUSE Leap 42.2 ______________________________________________________________________________ An update that solves two vulnerabilities and has four fixes is now available. Description: This update for xen to version 4.7.4 (bsc#1027519) fixes several issues. This new feature was added: - Support migration of HVM domains larger than 1 TB These security issues were fixed: - bsc#1068187: Failure to recognize errors in the Populate on Demand (PoD) code allowed for DoS (XSA-246) - bsc#1068191: Missing p2m error checking in PoD code allowed unprivileged guests to retain a writable mapping of freed memory leading to information leaks, privilege escalation or DoS (XSA-247). - CVE-2017-15289: The mode4and5 write functions allowed local OS guest privileged users to cause a denial of service (out-of-bounds write access and Qemu process crash) via vectors related to dst calculation (bsc#1063123) - CVE-2017-15597: A grant copy operation being done on a grant of a dying domain allowed a malicious guest administrator to corrupt hypervisor memory, allowing for DoS or potentially privilege escalation and information leaks (bsc#1061075). This non-security issue was fixed: - bsc#1055047: Fixed --initrd-inject option in virt-install This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1322=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.2 (i586 x86_64): xen-debugsource-4.7.4_02-11.21.1 xen-devel-4.7.4_02-11.21.1 xen-libs-4.7.4_02-11.21.1 xen-libs-debuginfo-4.7.4_02-11.21.1 xen-tools-domU-4.7.4_02-11.21.1 xen-tools-domU-debuginfo-4.7.4_02-11.21.1 - openSUSE Leap 42.2 (x86_64): xen-4.7.4_02-11.21.1 xen-doc-html-4.7.4_02-11.21.1 xen-libs-32bit-4.7.4_02-11.21.1 xen-libs-debuginfo-32bit-4.7.4_02-11.21.1 xen-tools-4.7.4_02-11.21.1 xen-tools-debuginfo-4.7.4_02-11.21.1 References: https://www.suse.com/security/cve/CVE-2017-15289.html https://www.suse.com/security/cve/CVE-2017-15597.html https://bugzilla.suse.com/1027519 https://bugzilla.suse.com/1055047 https://bugzilla.suse.com/1061075 https://bugzilla.suse.com/1063123 https://bugzilla.suse.com/1068187 https://bugzilla.suse.com/1068191

1 0

openSUSE-SU-2017:3193-1: important: Security update for xen
by opensuse-security＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Security Update: Security update for xen ______________________________________________________________________________ Announcement ID: openSUSE-SU-2017:3193-1 Rating: important References: #1027519 #1055047 #1061075 #1063123 #1068187 #1068191 Cross-References: CVE-2017-15289 CVE-2017-15597 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that solves two vulnerabilities and has four fixes is now available. Description: This update for xen to version 4.9.1 (bsc#1027519) fixes several issues. This new feature was added: - Support migration of HVM domains larger than 1 TB These security issues were fixed: - bsc#1068187: Failure to recognize errors in the Populate on Demand (PoD) code allowed for DoS (XSA-246) - bsc#1068191: Missing p2m error checking in PoD code allowed unprivileged guests to retain a writable mapping of freed memory leading to information leaks, privilege escalation or DoS (XSA-247). - CVE-2017-15289: The mode4and5 write functions allowed local OS guest privileged users to cause a denial of service (out-of-bounds write access and Qemu process crash) via vectors related to dst calculation (bsc#1063123) - CVE-2017-15597: A grant copy operation being done on a grant of a dying domain allowed a malicious guest administrator to corrupt hypervisor memory, allowing for DoS or potentially privilege escalation and information leaks (bsc#1061075). This non-security issue was fixed: - bsc#1055047: Fixed --initrd-inject option in virt-install This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1321=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (x86_64): xen-4.9.1_02-13.2 xen-debugsource-4.9.1_02-13.2 xen-devel-4.9.1_02-13.2 xen-doc-html-4.9.1_02-13.2 xen-libs-4.9.1_02-13.2 xen-libs-debuginfo-4.9.1_02-13.2 xen-tools-4.9.1_02-13.2 xen-tools-debuginfo-4.9.1_02-13.2 xen-tools-domU-4.9.1_02-13.2 xen-tools-domU-debuginfo-4.9.1_02-13.2 References: https://www.suse.com/security/cve/CVE-2017-15289.html https://www.suse.com/security/cve/CVE-2017-15597.html https://bugzilla.suse.com/1027519 https://bugzilla.suse.com/1055047 https://bugzilla.suse.com/1061075 https://bugzilla.suse.com/1063123 https://bugzilla.suse.com/1068187 https://bugzilla.suse.com/1068191

1 0

openSUSE-SU-2017:3192-1: moderate: Security update for openssl
by opensuse-security＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Security Update: Security update for openssl ______________________________________________________________________________ Announcement ID: openSUSE-SU-2017:3192-1 Rating: moderate References: #1055825 #1056058 #1065363 #1066242 Cross-References: CVE-2017-3735 CVE-2017-3736 Affected Products: openSUSE Leap 42.3 openSUSE Leap 42.2 ______________________________________________________________________________ An update that solves two vulnerabilities and has two fixes is now available. Description: This update for openssl fixes the following issues: Security issues fixed: - CVE-2017-3735: openssl1,openssl: Malformed X.509 IPAdressFamily could cause OOB read (bsc#1056058) - CVE-2017-3736: openssl: bn_sqrx8x_internal carry bug on x86_64 (bsc#1066242) - Out of bounds read+crash in DES_fcrypt (bsc#1065363) - openssl DEFAULT_SUSE cipher list is missing ECDHE-ECDSA ciphers (bsc#1055825) This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1324=1 - openSUSE Leap 42.2: zypper in -t patch openSUSE-2017-1324=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): libopenssl-devel-1.0.2j-13.1 libopenssl1_0_0-1.0.2j-13.1 libopenssl1_0_0-debuginfo-1.0.2j-13.1 libopenssl1_0_0-hmac-1.0.2j-13.1 openssl-1.0.2j-13.1 openssl-cavs-1.0.2j-13.1 openssl-cavs-debuginfo-1.0.2j-13.1 openssl-debuginfo-1.0.2j-13.1 openssl-debugsource-1.0.2j-13.1 - openSUSE Leap 42.3 (noarch): openssl-doc-1.0.2j-13.1 - openSUSE Leap 42.3 (x86_64): libopenssl-devel-32bit-1.0.2j-13.1 libopenssl1_0_0-32bit-1.0.2j-13.1 libopenssl1_0_0-debuginfo-32bit-1.0.2j-13.1 libopenssl1_0_0-hmac-32bit-1.0.2j-13.1 - openSUSE Leap 42.2 (i586 x86_64): libopenssl-devel-1.0.2j-6.6.1 libopenssl1_0_0-1.0.2j-6.6.1 libopenssl1_0_0-debuginfo-1.0.2j-6.6.1 libopenssl1_0_0-hmac-1.0.2j-6.6.1 openssl-1.0.2j-6.6.1 openssl-cavs-1.0.2j-6.6.1 openssl-cavs-debuginfo-1.0.2j-6.6.1 openssl-debuginfo-1.0.2j-6.6.1 openssl-debugsource-1.0.2j-6.6.1 - openSUSE Leap 42.2 (x86_64): libopenssl-devel-32bit-1.0.2j-6.6.1 libopenssl1_0_0-32bit-1.0.2j-6.6.1 libopenssl1_0_0-debuginfo-32bit-1.0.2j-6.6.1 libopenssl1_0_0-hmac-32bit-1.0.2j-6.6.1 - openSUSE Leap 42.2 (noarch): openssl-doc-1.0.2j-6.6.1 References: https://www.suse.com/security/cve/CVE-2017-3735.html https://www.suse.com/security/cve/CVE-2017-3736.html https://bugzilla.suse.com/1055825 https://bugzilla.suse.com/1056058 https://bugzilla.suse.com/1065363 https://bugzilla.suse.com/1066242

1 0

openSUSE-RU-2017:3191-1: moderate: Recommended update for libsolv, libzypp, zypper
by maintenance＠opensuse.org 02 Dec '17

02 Dec '17

openSUSE Recommended Update: Recommended update for libsolv, libzypp, zypper ______________________________________________________________________________ Announcement ID: openSUSE-RU-2017:3191-1 Rating: moderate References: #1047233 #1053671 #1057188 #1057634 #1058695 #1058783 #1059065 #1061384 #1062561 #1064999 #661410 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has 11 recommended fixes can now be installed. Description: The Software Update Stack was updated to receive fixes and enhancements. libsolv: - Many fixes and improvements for cleandeps. - Always create dup rules for "distupgrade" jobs. - Use recommends also for ordering packages. - Fix splitprovides handling with addalreadyrecommended turned off. (bsc#1059065) - Expose solver_get_recommendations() in bindings. - Fix bug in solver_prune_to_highest_prio_per_name resulting in bad output from solver_get_recommendations(). - Support 'without' and 'unless' dependencies. - Use same heuristic as upstream to determine source RPMs. - Fix memory leak in bindings. - Add pool_best_solvables() function. - Fix 64bit integer parsing from RPM headers. - Enable bzip2 and xz/lzma compression support. - Enable complex/rich dependencies on distributions with RPM 4.13+. libzypp: - Fix media handling in presence of a repo path prefix. (bsc#1062561) - Fix RepoProvideFile ignoring a repo path prefix. (bsc#1062561) - Remove unused legacy notify-message script. (bsc#1058783) - Support multiple product licenses in repomd. (fate#322276) - Propagate 'rpm --import' errors. (bsc#1057188) - Fix typos in zypp.conf. zypper: - Locale: Fix possible segmentation fault. (bsc#1064999) - Add summary hint if product is better updated by a different command. This is mainly used by rolling distributions like openSUSE Tumbleweed to remind their users to use 'zypper dup' to update (not zypper up or patch). (bsc#1061384) - Unify '(add|modify)(repo|service)' property related arguments. - Fixed 'add' commands supporting to set only a subset of properties. - Introduced '-f/-F' as preferred short option for --[no-]refresh in all four commands. (bsc#661410, bsc#1053671) - Fix missing package names in installation report. (bsc#1058695) - Differ between unsupported and packages with unknown support status. (bsc#1057634) - Return error code '107' if an RPM's %post configuration script fails, but only if ZYPPER_ON_CODE12_RETURN_107=1 is set in the environment. (bsc#1047233) This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2017-1326=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.3 (i586 x86_64): libsolv-debugsource-0.6.30-3.1 libsolv-demo-0.6.30-3.1 libsolv-demo-debuginfo-0.6.30-3.1 libsolv-devel-0.6.30-3.1 libsolv-devel-debuginfo-0.6.30-3.1 libsolv-tools-0.6.30-3.1 libsolv-tools-debuginfo-0.6.30-3.1 libzypp-16.17.4-15.1 libzypp-debuginfo-16.17.4-15.1 libzypp-debugsource-16.17.4-15.1 libzypp-devel-16.17.4-15.1 libzypp-devel-doc-16.17.4-15.1 perl-solv-0.6.30-3.1 perl-solv-debuginfo-0.6.30-3.1 python-solv-0.6.30-3.1 python-solv-debuginfo-0.6.30-3.1 python3-solv-0.6.30-3.1 python3-solv-debuginfo-0.6.30-3.1 ruby-solv-0.6.30-3.1 ruby-solv-debuginfo-0.6.30-3.1 zypper-1.13.38-11.1 zypper-debuginfo-1.13.38-11.1 zypper-debugsource-1.13.38-11.1 - openSUSE Leap 42.3 (noarch): zypper-aptitude-1.13.38-11.1 zypper-log-1.13.38-11.1 References: https://bugzilla.suse.com/1047233 https://bugzilla.suse.com/1053671 https://bugzilla.suse.com/1057188 https://bugzilla.suse.com/1057634 https://bugzilla.suse.com/1058695 https://bugzilla.suse.com/1058783 https://bugzilla.suse.com/1059065 https://bugzilla.suse.com/1061384 https://bugzilla.suse.com/1062561 https://bugzilla.suse.com/1064999 https://bugzilla.suse.com/661410

1 0