February 2022 - openSUSE Security Announce

openSUSE-SU-2022:0574-1: important: Security update for ucode-intel
by opensuse-security＠opensuse.org 25 Feb '22

25 Feb '22

openSUSE Security Update: Security update for ucode-intel ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0574-1 Rating: important References: #1192615 #1195779 #1195780 #1195781 Cross-References: CVE-2021-0127 CVE-2021-0145 CVE-2021-0146 CVE-2021-33120 CVSS scores: CVE-2021-0127 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-0127 (SUSE): 5.6 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:N/I:N/A:H CVE-2021-0145 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N CVE-2021-0145 (SUSE): 6.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N CVE-2021-0146 (NVD) : 6.8 CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2021-0146 (SUSE): 7.1 CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H CVE-2021-33120 (NVD) : 5.4 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:L CVE-2021-33120 (SUSE): 3.6 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:L Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes four vulnerabilities is now available. Description: This update for ucode-intel fixes the following issues: Updated to Intel CPU Microcode 20220207 release. - CVE-2021-0146: Fixed a potential security vulnerability in some Intel Processors may allow escalation of privilege (bsc#1192615) - CVE-2021-0127: Intel Processor Breakpoint Control Flow (bsc#1195779) - CVE-2021-0145: Fast store forward predictor - Cross Domain Training (bsc#1195780) - CVE-2021-33120: Out of bounds read for some Intel Atom processors (bsc#1195781) - Security updates for [INTEL-SA-00528](https://www.intel.com/content/www/us/en/security-center/ad visory/intel-sa-00528.html) - Security updates for [INTEL-SA-00532](https://www.intel.com/content/www/us/en/security-center/ad visory/intel-sa-00532.html) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-574=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-574=1 Package List: - openSUSE Leap 15.4 (x86_64): ucode-intel-20220207-10.1 - openSUSE Leap 15.3 (x86_64): ucode-intel-20220207-10.1 References: https://www.suse.com/security/cve/CVE-2021-0127.html https://www.suse.com/security/cve/CVE-2021-0145.html https://www.suse.com/security/cve/CVE-2021-0146.html https://www.suse.com/security/cve/CVE-2021-33120.html https://bugzilla.suse.com/1192615 https://bugzilla.suse.com/1195779 https://bugzilla.suse.com/1195780 https://bugzilla.suse.com/1195781

1 0

openSUSE-SU-2022:0050-1: important: Security update for opera
by opensuse-security＠opensuse.org 25 Feb '22

25 Feb '22

openSUSE Security Update: Security update for opera ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0050-1 Rating: important References: #1027353 #1081164 #1102775 #1108471 #1111122 #1116807 #1140341 #1145864 #1152968 #1174961 #1178021 #1178351 #1179009 #1179699 #1181591 SLE-6120 Cross-References: CVE-2018-18065 CVE-2020-15862 CVE-2022-0452 CVE-2022-0453 CVE-2022-0454 CVE-2022-0455 CVE-2022-0456 CVE-2022-0457 CVE-2022-0458 CVE-2022-0459 CVE-2022-0460 CVE-2022-0461 CVE-2022-0462 CVE-2022-0463 CVE-2022-0464 CVE-2022-0465 CVE-2022-0466 CVE-2022-0467 CVE-2022-0468 CVE-2022-0469 CVE-2022-0470 CVSS scores: CVE-2018-18065 (NVD) : 6.5 CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2018-18065 (SUSE): 7.5 CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2020-15862 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2020-15862 (SUSE): 8.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.3:NonFree ______________________________________________________________________________ An update that fixes 21 vulnerabilities, contains one feature is now available. Description: This update for opera fixes the following issues: - Update to 84.0.4316.14 - CHR-8753 Update chromium on desktop-stable-98-4316 to 98.0.4758.82 - DNA-97177 Battery saver �� the icon looks bad for DPI!=100% - DNA-97614 automatic video pop-out for most popular websites broadcasting Winter Olympic Games 2022 - DNA-97804 Promote O84 to stable - The update to chromium 98.0.4758.82 fixes following issues: CVE-2022-0452, CVE-2022-0453, CVE-2022-0454, CVE-2022-0455, CVE-2022-0456, CVE-2022-0457, CVE-2022-0458, CVE-2022-0459, CVE-2022-0460, CVE-2022-0461, CVE-2022-0462, CVE-2022-0463, CVE-2022-0464, CVE-2022-0465, CVE-2022-0466, CVE-2022-0467, CVE-2022-0468, CVE-2022-0469, CVE-2022-0470 - Complete Opera 84.0 changelog at: https://blogs.opera.com/desktop/changelog-for-84/ - Update to 83.0.4254.54 - DNA-96581 Fast tab tooltip doesn��t always show related sites with scrollable tab strip - DNA-96608 Cannot drag a tab to create a new window - DNA-96657 Do not make tab tooltip hoverable if there��s no list of tabs - DNA-97291 Crash at opera::flow::FlowSessionImpl::RegisterDevice(base::OnceCallback) - DNA-97468 Incorrect number of restored tabs when video-popout is detached - DNA-97476 Add retry to stapling during signing - DNA-97609 Failing MetricsReporterTest.TimeSpent* smoketests Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3:NonFree: zypper in -t patch openSUSE-2022-50=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-50=1 Package List: - openSUSE Leap 15.3:NonFree (x86_64): opera-84.0.4316.14-lp153.2.36.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): libsnmp30-5.7.3-10.9.1 libsnmp30-debuginfo-5.7.3-10.9.1 net-snmp-5.7.3-10.9.1 net-snmp-debuginfo-5.7.3-10.9.1 net-snmp-debugsource-5.7.3-10.9.1 net-snmp-devel-5.7.3-10.9.1 perl-SNMP-5.7.3-10.9.1 perl-SNMP-debuginfo-5.7.3-10.9.1 python2-net-snmp-5.7.3-10.9.1 python2-net-snmp-debuginfo-5.7.3-10.9.1 python3-net-snmp-5.7.3-10.9.1 python3-net-snmp-debuginfo-5.7.3-10.9.1 snmp-mibs-5.7.3-10.9.1 - openSUSE Leap 15.3 (x86_64): libsnmp30-32bit-5.7.3-10.9.1 libsnmp30-32bit-debuginfo-5.7.3-10.9.1 net-snmp-devel-32bit-5.7.3-10.9.1 References: https://www.suse.com/security/cve/CVE-2018-18065.html https://www.suse.com/security/cve/CVE-2020-15862.html https://www.suse.com/security/cve/CVE-2022-0452.html https://www.suse.com/security/cve/CVE-2022-0453.html https://www.suse.com/security/cve/CVE-2022-0454.html https://www.suse.com/security/cve/CVE-2022-0455.html https://www.suse.com/security/cve/CVE-2022-0456.html https://www.suse.com/security/cve/CVE-2022-0457.html https://www.suse.com/security/cve/CVE-2022-0458.html https://www.suse.com/security/cve/CVE-2022-0459.html https://www.suse.com/security/cve/CVE-2022-0460.html https://www.suse.com/security/cve/CVE-2022-0461.html https://www.suse.com/security/cve/CVE-2022-0462.html https://www.suse.com/security/cve/CVE-2022-0463.html https://www.suse.com/security/cve/CVE-2022-0464.html https://www.suse.com/security/cve/CVE-2022-0465.html https://www.suse.com/security/cve/CVE-2022-0466.html https://www.suse.com/security/cve/CVE-2022-0467.html https://www.suse.com/security/cve/CVE-2022-0468.html https://www.suse.com/security/cve/CVE-2022-0469.html https://www.suse.com/security/cve/CVE-2022-0470.html https://bugzilla.suse.com/1027353 https://bugzilla.suse.com/1081164 https://bugzilla.suse.com/1102775 https://bugzilla.suse.com/1108471 https://bugzilla.suse.com/1111122 https://bugzilla.suse.com/1116807 https://bugzilla.suse.com/1140341 https://bugzilla.suse.com/1145864 https://bugzilla.suse.com/1152968 https://bugzilla.suse.com/1174961 https://bugzilla.suse.com/1178021 https://bugzilla.suse.com/1178351 https://bugzilla.suse.com/1179009 https://bugzilla.suse.com/1179699 https://bugzilla.suse.com/1181591

1 0

openSUSE-SU-2022:0562-1: moderate: Security update for jasper
by opensuse-security＠opensuse.org 24 Feb '22

24 Feb '22

openSUSE Security Update: Security update for jasper ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0562-1 Rating: moderate References: #1188437 Cross-References: CVE-2021-27845 CVSS scores: CVE-2021-27845 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2021-27845 (SUSE): 4 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for jasper fixes the following issues: - CVE-2021-27845: Fixed divide-by-zery issue in cp_create() (bsc#1188437). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-562=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-562=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): jasper-2.0.14-3.22.1 jasper-debuginfo-2.0.14-3.22.1 jasper-debugsource-2.0.14-3.22.1 libjasper-devel-2.0.14-3.22.1 libjasper4-2.0.14-3.22.1 libjasper4-debuginfo-2.0.14-3.22.1 - openSUSE Leap 15.4 (x86_64): libjasper4-32bit-2.0.14-3.22.1 libjasper4-32bit-debuginfo-2.0.14-3.22.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): jasper-2.0.14-3.22.1 jasper-debuginfo-2.0.14-3.22.1 jasper-debugsource-2.0.14-3.22.1 libjasper-devel-2.0.14-3.22.1 libjasper4-2.0.14-3.22.1 libjasper4-debuginfo-2.0.14-3.22.1 - openSUSE Leap 15.3 (x86_64): libjasper4-32bit-2.0.14-3.22.1 libjasper4-32bit-debuginfo-2.0.14-3.22.1 References: https://www.suse.com/security/cve/CVE-2021-27845.html https://bugzilla.suse.com/1188437

1 0

openSUSE-SU-2022:0559-1: important: Security update for MozillaThunderbird
by opensuse-security＠opensuse.org 23 Feb '22

23 Feb '22

openSUSE Security Update: Security update for MozillaThunderbird ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0559-1 Rating: important References: #1195682 #1196072 Cross-References: CVE-2022-0566 CVE-2022-22753 CVE-2022-22754 CVE-2022-22756 CVE-2022-22759 CVE-2022-22760 CVE-2022-22761 CVE-2022-22763 CVE-2022-22764 Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes 9 vulnerabilities is now available. Description: This update for MozillaThunderbird fixes the following issues: - Mozilla Thunderbird 91.6.1 / MFSA 2022-07 (bsc#1196072) * CVE-2022-0566 (bmo#1753094) Crafted email could trigger an out-of-bounds write - Mozilla Thunderbird 91.6 / MFSA 2022-06 (bsc#1195682) * CVE-2022-22753 (bmo#1732435) Privilege Escalation to SYSTEM on Windows via Maintenance Service * CVE-2022-22754 (bmo#1750565) Extensions could have bypassed permission confirmation during update * CVE-2022-22756 (bmo#1317873) Drag and dropping an image could have resulted in the dropped object being an executable * CVE-2022-22759 (bmo#1739957) Sandboxed iframes could have executed script if the parent appended elements * CVE-2022-22760 (bmo#1740985, bmo#1748503) Cross-Origin responses could be distinguished between script and non-script content-types * CVE-2022-22761 (bmo#1745566) frame-ancestors Content Security Policy directive was not enforced for framed extension pages * CVE-2022-22763 (bmo#1740534) Script Execution during invalid object state * CVE-2022-22764 (bmo#1742682, bmo#1744165, bmo#1746545, bmo#1748210, bmo#1748279) Memory safety bugs fixed in Thunderbird 91.6 Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-559=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-559=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): MozillaThunderbird-91.6.1-8.54.1 MozillaThunderbird-debuginfo-91.6.1-8.54.1 MozillaThunderbird-debugsource-91.6.1-8.54.1 MozillaThunderbird-translations-common-91.6.1-8.54.1 MozillaThunderbird-translations-other-91.6.1-8.54.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): MozillaThunderbird-91.6.1-8.54.1 MozillaThunderbird-debuginfo-91.6.1-8.54.1 MozillaThunderbird-debugsource-91.6.1-8.54.1 MozillaThunderbird-translations-common-91.6.1-8.54.1 MozillaThunderbird-translations-other-91.6.1-8.54.1 References: https://www.suse.com/security/cve/CVE-2022-0566.html https://www.suse.com/security/cve/CVE-2022-22753.html https://www.suse.com/security/cve/CVE-2022-22754.html https://www.suse.com/security/cve/CVE-2022-22756.html https://www.suse.com/security/cve/CVE-2022-22759.html https://www.suse.com/security/cve/CVE-2022-22760.html https://www.suse.com/security/cve/CVE-2022-22761.html https://www.suse.com/security/cve/CVE-2022-22763.html https://www.suse.com/security/cve/CVE-2022-22764.html https://bugzilla.suse.com/1195682 https://bugzilla.suse.com/1196072

1 0

openSUSE-SU-2022:0539-1: moderate: Security update for systemd
by opensuse-security＠opensuse.org 21 Feb '22

21 Feb '22

openSUSE Security Update: Security update for systemd ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0539-1 Rating: moderate References: #1191826 #1192637 #1194178 Cross-References: CVE-2021-3997 CVSS scores: CVE-2021-3997 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that solves one vulnerability and has two fixes is now available. Description: This update for systemd fixes the following issues: - CVE-2021-3997: Fixed an uncontrolled recursion in systemd's systemd-tmpfiles (bsc#1194178). The following non-security bugs were fixed: - udev/net_id: don't generate slot based names if multiple devices might claim the same slot (bsc#1192637) - localectl: don't omit keymaps files that are symlinks (bsc#1191826) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-539=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-539=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): systemd-logger-246.16-150300.7.39.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): libsystemd0-246.16-150300.7.39.1 libsystemd0-debuginfo-246.16-150300.7.39.1 libudev-devel-246.16-150300.7.39.1 libudev1-246.16-150300.7.39.1 libudev1-debuginfo-246.16-150300.7.39.1 nss-myhostname-246.16-150300.7.39.1 nss-myhostname-debuginfo-246.16-150300.7.39.1 nss-mymachines-246.16-150300.7.39.1 nss-mymachines-debuginfo-246.16-150300.7.39.1 nss-resolve-246.16-150300.7.39.1 nss-resolve-debuginfo-246.16-150300.7.39.1 nss-systemd-246.16-150300.7.39.1 nss-systemd-debuginfo-246.16-150300.7.39.1 systemd-246.16-150300.7.39.1 systemd-container-246.16-150300.7.39.1 systemd-container-debuginfo-246.16-150300.7.39.1 systemd-coredump-246.16-150300.7.39.1 systemd-coredump-debuginfo-246.16-150300.7.39.1 systemd-debuginfo-246.16-150300.7.39.1 systemd-debugsource-246.16-150300.7.39.1 systemd-devel-246.16-150300.7.39.1 systemd-doc-246.16-150300.7.39.1 systemd-journal-remote-246.16-150300.7.39.1 systemd-journal-remote-debuginfo-246.16-150300.7.39.1 systemd-logger-246.16-150300.7.39.1 systemd-network-246.16-150300.7.39.1 systemd-network-debuginfo-246.16-150300.7.39.1 systemd-sysvinit-246.16-150300.7.39.1 udev-246.16-150300.7.39.1 udev-debuginfo-246.16-150300.7.39.1 - openSUSE Leap 15.3 (noarch): systemd-lang-246.16-150300.7.39.1 - openSUSE Leap 15.3 (x86_64): libsystemd0-32bit-246.16-150300.7.39.1 libsystemd0-32bit-debuginfo-246.16-150300.7.39.1 libudev-devel-32bit-246.16-150300.7.39.1 libudev1-32bit-246.16-150300.7.39.1 libudev1-32bit-debuginfo-246.16-150300.7.39.1 nss-myhostname-32bit-246.16-150300.7.39.1 nss-myhostname-32bit-debuginfo-246.16-150300.7.39.1 nss-mymachines-32bit-246.16-150300.7.39.1 nss-mymachines-32bit-debuginfo-246.16-150300.7.39.1 systemd-32bit-246.16-150300.7.39.1 systemd-32bit-debuginfo-246.16-150300.7.39.1 References: https://www.suse.com/security/cve/CVE-2021-3997.html https://bugzilla.suse.com/1191826 https://bugzilla.suse.com/1192637 https://bugzilla.suse.com/1194178

1 0

openSUSE-SU-2022:0540-1: moderate: Security update for ImageMagick
by opensuse-security＠opensuse.org 21 Feb '22

21 Feb '22

openSUSE Security Update: Security update for ImageMagick ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0540-1 Rating: moderate References: #1195563 Cross-References: CVE-2022-0284 CVSS scores: CVE-2022-0284 (SUSE): 6.1 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:H Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for ImageMagick fixes the following issues: - CVE-2022-0284: Fixed heap buffer overread in GetPixelAlpha() in MagickCore/pixel-accessor.h (bsc#1195563). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-540=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-540=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): libMagick++-7_Q16HDRI4-7.0.7.34-10.21.1 libMagick++-7_Q16HDRI4-debuginfo-7.0.7.34-10.21.1 libMagickCore-7_Q16HDRI6-7.0.7.34-10.21.1 libMagickCore-7_Q16HDRI6-debuginfo-7.0.7.34-10.21.1 libMagickWand-7_Q16HDRI6-7.0.7.34-10.21.1 libMagickWand-7_Q16HDRI6-debuginfo-7.0.7.34-10.21.1 - openSUSE Leap 15.4 (x86_64): libMagick++-7_Q16HDRI4-32bit-7.0.7.34-10.21.1 libMagick++-7_Q16HDRI4-32bit-debuginfo-7.0.7.34-10.21.1 libMagickCore-7_Q16HDRI6-32bit-7.0.7.34-10.21.1 libMagickCore-7_Q16HDRI6-32bit-debuginfo-7.0.7.34-10.21.1 libMagickWand-7_Q16HDRI6-32bit-7.0.7.34-10.21.1 libMagickWand-7_Q16HDRI6-32bit-debuginfo-7.0.7.34-10.21.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): ImageMagick-7.0.7.34-10.21.1 ImageMagick-config-7-SUSE-7.0.7.34-10.21.1 ImageMagick-config-7-upstream-7.0.7.34-10.21.1 ImageMagick-debuginfo-7.0.7.34-10.21.1 ImageMagick-debugsource-7.0.7.34-10.21.1 ImageMagick-devel-7.0.7.34-10.21.1 ImageMagick-extra-7.0.7.34-10.21.1 ImageMagick-extra-debuginfo-7.0.7.34-10.21.1 libMagick++-7_Q16HDRI4-7.0.7.34-10.21.1 libMagick++-7_Q16HDRI4-debuginfo-7.0.7.34-10.21.1 libMagick++-devel-7.0.7.34-10.21.1 libMagickCore-7_Q16HDRI6-7.0.7.34-10.21.1 libMagickCore-7_Q16HDRI6-debuginfo-7.0.7.34-10.21.1 libMagickWand-7_Q16HDRI6-7.0.7.34-10.21.1 libMagickWand-7_Q16HDRI6-debuginfo-7.0.7.34-10.21.1 perl-PerlMagick-7.0.7.34-10.21.1 perl-PerlMagick-debuginfo-7.0.7.34-10.21.1 - openSUSE Leap 15.3 (x86_64): ImageMagick-devel-32bit-7.0.7.34-10.21.1 libMagick++-7_Q16HDRI4-32bit-7.0.7.34-10.21.1 libMagick++-7_Q16HDRI4-32bit-debuginfo-7.0.7.34-10.21.1 libMagick++-devel-32bit-7.0.7.34-10.21.1 libMagickCore-7_Q16HDRI6-32bit-7.0.7.34-10.21.1 libMagickCore-7_Q16HDRI6-32bit-debuginfo-7.0.7.34-10.21.1 libMagickWand-7_Q16HDRI6-32bit-7.0.7.34-10.21.1 libMagickWand-7_Q16HDRI6-32bit-debuginfo-7.0.7.34-10.21.1 - openSUSE Leap 15.3 (noarch): ImageMagick-doc-7.0.7.34-10.21.1 References: https://www.suse.com/security/cve/CVE-2022-0284.html https://bugzilla.suse.com/1195563

1 0

openSUSE-SU-2022:0046-1: moderate: Security update for sphinx
by opensuse-security＠opensuse.org 21 Feb '22

21 Feb '22

openSUSE Security Update: Security update for sphinx ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0046-1 Rating: moderate References: #1195227 Cross-References: CVE-2020-29050 CVSS scores: CVE-2020-29050 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: sphinx was updated to fix the following issues: - CVE-2020-29050: SphinxSearch in Sphinx Technologies Sphinx through 3.1.1 allows directory traversal (in conjunction with CVE-2019-14511) because the mysql client can be used for CALL SNIPPETS and load_file operations on a full pathname (e.g., a file in the /etc directory). (boo#1195227) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-2022-46=1 Package List: - openSUSE Leap 15.4 (aarch64 i586 ppc64le s390x x86_64): libsphinxclient-0_0_1-2.2.11-lp154.3.3.1 libsphinxclient-devel-2.2.11-lp154.3.3.1 sphinx-2.2.11-lp154.3.3.1 sphinx-debuginfo-2.2.11-lp154.3.3.1 sphinx-debugsource-2.2.11-lp154.3.3.1 References: https://www.suse.com/security/cve/CVE-2020-29050.html https://bugzilla.suse.com/1195227

1 0

openSUSE-SU-2022:0526-1: moderate: Security update for kubevirt, virt-api-container, virt-controller-container, virt-handler-container, virt-launcher-container, virt-libguestfs-tools-container, virt-operator-container
by opensuse-security＠opensuse.org 21 Feb '22

21 Feb '22

openSUSE Security Update: Security update for kubevirt, virt-api-container, virt-controller-container, virt-handler-container, virt-launcher-container, virt-libguestfs-tools-container, virt-operator-container ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0526-1 Rating: moderate References: Cross-References: CVE-2021-43565 CVSS scores: CVE-2021-43565 (SUSE): 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for kubevirt, virt-api-container, virt-controller-container, virt-handler-container, virt-launcher-container, virt-libguestfs-tools-container, virt-operator-container fixes the following issues: - Update to version 0.49.0 Release notes https://github.com/kubevirt/kubevirt/releases/tag/v0.49.0 - Drop kubevirt-psp-caasp.yaml - Install curl and lsscsi (needed for testing) - Symlink UEFI firmware with AMD SEV support - Install tar package to enable kubectl cp ... - Make a "fixed appliance" for libguestfs - Explicitly install libguestfs{,-devel} and supermin Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-526=1 Package List: - openSUSE Leap 15.3 (x86_64): kubevirt-container-disk-0.49.0-150300.8.10.1 kubevirt-container-disk-debuginfo-0.49.0-150300.8.10.1 kubevirt-manifests-0.49.0-150300.8.10.1 kubevirt-tests-0.49.0-150300.8.10.1 kubevirt-tests-debuginfo-0.49.0-150300.8.10.1 kubevirt-virt-api-0.49.0-150300.8.10.1 kubevirt-virt-api-debuginfo-0.49.0-150300.8.10.1 kubevirt-virt-controller-0.49.0-150300.8.10.1 kubevirt-virt-controller-debuginfo-0.49.0-150300.8.10.1 kubevirt-virt-handler-0.49.0-150300.8.10.1 kubevirt-virt-handler-debuginfo-0.49.0-150300.8.10.1 kubevirt-virt-launcher-0.49.0-150300.8.10.1 kubevirt-virt-launcher-debuginfo-0.49.0-150300.8.10.1 kubevirt-virt-operator-0.49.0-150300.8.10.1 kubevirt-virt-operator-debuginfo-0.49.0-150300.8.10.1 kubevirt-virtctl-0.49.0-150300.8.10.1 kubevirt-virtctl-debuginfo-0.49.0-150300.8.10.1 obs-service-kubevirt_containers_meta-0.49.0-150300.8.10.1 References: https://www.suse.com/security/cve/CVE-2021-43565.html

1 0

openSUSE-SU-2022:0047-1: important: Security update for opera
by opensuse-security＠opensuse.org 21 Feb '22

21 Feb '22

openSUSE Security Update: Security update for opera ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0047-1 Rating: important References: Cross-References: CVE-2021-37980 CVE-2021-37997 CVE-2021-37998 CVE-2021-37999 CVE-2021-38001 CVE-2021-38002 CVE-2021-38003 CVE-2021-38004 CVE-2021-38005 CVE-2021-38006 CVE-2021-38007 CVE-2021-38008 CVE-2021-38009 CVE-2021-38010 CVE-2021-38011 CVE-2021-38012 CVE-2021-38013 CVE-2021-38014 CVE-2021-38015 CVE-2021-38016 CVE-2021-38017 CVE-2021-38019 CVE-2021-38020 CVE-2021-38021 CVE-2021-38022 CVE-2021-4052 CVE-2021-4053 CVE-2021-4054 CVE-2021-4055 CVE-2021-4056 CVE-2021-4057 CVE-2021-4058 CVE-2021-4059 CVE-2021-4061 CVE-2021-4062 CVE-2021-4063 CVE-2021-4064 CVE-2021-4065 CVE-2021-4066 CVE-2021-4067 CVE-2021-4068 CVE-2021-4078 CVE-2021-4079 CVE-2021-4098 CVE-2021-4099 CVE-2021-4100 CVE-2021-4101 CVE-2021-4102 CVE-2022-0096 CVE-2022-0097 CVE-2022-0098 CVE-2022-0099 CVE-2022-0100 CVE-2022-0101 CVE-2022-0102 CVE-2022-0103 CVE-2022-0104 CVE-2022-0105 CVE-2022-0106 CVE-2022-0107 CVE-2022-0108 CVE-2022-0109 CVE-2022-0110 CVE-2022-0111 CVE-2022-0112 CVE-2022-0113 CVE-2022-0114 CVE-2022-0115 CVE-2022-0116 CVE-2022-0117 CVE-2022-0118 CVE-2022-0120 CVE-2022-0289 CVE-2022-0290 CVE-2022-0291 CVE-2022-0292 CVE-2022-0293 CVE-2022-0294 CVE-2022-0295 CVE-2022-0296 CVE-2022-0297 CVE-2022-0298 CVE-2022-0300 CVE-2022-0301 CVE-2022-0302 CVE-2022-0304 CVE-2022-0305 CVE-2022-0306 CVE-2022-0307 CVE-2022-0308 CVE-2022-0309 CVE-2022-0310 CVE-2022-0311 CVSS scores: CVE-2021-37980 (NVD) : 7.4 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N CVE-2021-37997 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-37998 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-37999 (NVD) : 6.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N CVE-2021-38001 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38002 (NVD) : 9.6 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:H CVE-2021-38003 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38004 (NVD) : 4.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:N CVE-2021-38005 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38006 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38007 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38008 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38009 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2021-38010 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N CVE-2021-38011 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38012 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38013 (NVD) : 9.6 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:H CVE-2021-38014 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38015 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38016 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38017 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-38019 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2021-38020 (NVD) : 4.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:N CVE-2021-38021 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N CVE-2021-38022 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2021-4052 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4053 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4054 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N CVE-2021-4055 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4056 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4057 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4058 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4059 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2021-4061 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4062 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4063 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4064 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4065 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4066 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4067 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4068 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2021-4078 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4079 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4098 (NVD) : 7.4 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:N/I:H/A:N CVE-2021-4099 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4100 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4101 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-4102 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0096 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0097 (NVD) : 9.6 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:H CVE-2022-0098 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0099 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0100 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0101 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0102 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0103 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0104 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0105 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0106 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0107 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0108 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2022-0109 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2022-0110 (NVD) : 4.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:N CVE-2022-0111 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N CVE-2022-0289 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0290 (NVD) : 9.6 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:H CVE-2022-0293 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0295 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0296 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0297 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0298 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0300 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0302 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0304 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0307 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0308 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H Affected Products: openSUSE Leap 15.3:NonFree ______________________________________________________________________________ An update that fixes 93 vulnerabilities is now available. Description: This update for opera fixes the following issues: Update to 83.0.4254.27 - CHR-8737 Update chromium on desktop-stable-97-4254 to 97.0.4692.99 - DNA-96336 [Mac] Translate new network installer slogan - DNA-96678 Add battery level monitoring capability to powerSavePrivate - DNA-96939 Crash at opera::ExternalVideoService::MarkAsManuallyClosed() - DNA-97276 Enable #static-tab-audio-indicator on all streams - The update to chromium 97.0.4692.99 fixes following issues: CVE-2022-0289, CVE-2022-0290, CVE-2022-0291, CVE-2022-0292, CVE-2022-0293, CVE-2022-0294, CVE-2022-0295, CVE-2022-0296, CVE-2022-0297, CVE-2022-0298, CVE-2022-0300, CVE-2022-0301, CVE-2022-0302, CVE-2022-0304, CVE-2022-0305, CVE-2022-0306, CVE-2022-0307, CVE-2022-0308, CVE-2022-0309, CVE-2022-0310, CVE-2022-0311 Update to 83.0.4254.19 - DNA-96079 Turn on #automatic-video-popout on developer - DNA-97070 Opera 83 translations - DNA-97119 [LastCard] Stop showing used burner cards - DNA-97131 Enable automatic-video-popout on all streams from O84 on - DNA-97257 Crash at views::ImageButton::SetMinimumImageSize(gfx::Size const&) - DNA-97259 Promote O83 to stable - Complete Opera 83.0 changelog at: https://blogs.opera.com/desktop/changelog-for-83/ - Update to 83.0.4254.16 - DNA-96968 Fix alignment of the 'Advanced' button in Settings - Update to 83.0.4254.14 - CHR-8701 Update chromium on desktop-stable-97-4254 to 97.0.4692.45 - CHR-8713 Update chromium on desktop-stable-97-4254 to 97.0.4692.56 - CHR-8723 Update chromium on desktop-stable-97-4254 to 97.0.4692.71 - DNA-96780 Crash at ui::NativeTheme::RemoveObserver(ui::NativeThemeObserver*) - DNA-96822 Tab close resize behavior change - DNA-96861 Create Loomi Options menu - DNA-96904 Support Win11 snap layout popup - DNA-96951 Tab close animation broken - DNA-96991 Tab X button doesn��t work correctly - DNA-97027 Incorrect tab size after tab close - The update to chromium 97.0.4692.71 fixes following issues: CVE-2022-0096, CVE-2022-0097, CVE-2022-0098, CVE-2022-0099, CVE-2022-0100, CVE-2022-0101, CVE-2022-0102, CVE-2022-0103, CVE-2022-0104, CVE-2022-0105, CVE-2022-0105, CVE-2022-0106, CVE-2022-0107, CVE-2022-0108, CVE-2022-0109, CVE-2022-0110, CVE-2022-0111, CVE-2022-0111, CVE-2022-0112, CVE-2022-0113, CVE-2022-0114, CVE-2022-0115, CVE-2022-0116, CVE-2022-0117, CVE-2022-0118, CVE-2022-0120 - Update to version 82.0.4227.58 - DNA-96780 Crash at ui::NativeTheme::RemoveObserver(ui::NativeThemeObserver*) - DNA-96890 Settings default browser not working for current user on Windows 7 - Update to version 82.0.4227.43 - CHR-8705 Update chromium on desktop-stable-96-4227 to 96.0.4664.110 - DNA-93284 Unstable obj/opera/desktop/common/installer_rc_generated/installer.res - DNA-95908 Interstitial/internal pages shown as NOT SECURE after visiting http site - DNA-96404 Opera doesn��t show on main screen when second screen is abruptly disconnected - The update to chromium 96.0.4664.110 fixes following issues: CVE-2021-4098, CVE-2021-4099, CVE-2021-4100, CVE-2021-4101, CVE-2021-4102 - Update to version 82.0.4227.33 - CHR-8689 Update chromium on desktop-stable-96-4227 to 96.0.4664.93 - DNA-96559 Tooltip popup looks bad in dark theme - DNA-96570 [Player] Tidal logging in via PLAY doesn��t work - DNA-96594 Unnecessary extra space in fullscreen mode on M1 Pro MacBooks - DNA-96649 Update Meme button - DNA-96676 Add Icon in the Sidebar Setup - DNA-96677 Add default URL - The update to chromium 96.0.4664.93 fixes following issues: CVE-2021-4052, CVE-2021-4053, CVE-2021-4079, CVE-2021-4054, CVE-2021-4078, CVE-2021-4055, CVE-2021-4056, CVE-2021-4057, CVE-2021-4058, CVE-2021-4059, CVE-2021-4061, CVE-2021-4062, CVE-2021-4063, CVE-2021-4064, CVE-2021-4065, CVE-2021-4066, CVE-2021-4067, CVE-2021-4068 - Update to version 82.0.4227.23 - DNA-95632 With new au-logic UUID is set with delay and may be not set for pb-builds (when closing fast) - DNA-96349 Laggy tooltip animation - DNA-96483 [Snap][Linux] Video not working / wrong ffmpeg snap version for Opera 82 - DNA-96493 Create 'small' enticement in credit card autofill - DNA-96533 Opera 82 translations - DNA-96535 Make the URL configurable - DNA-96553 Add switch to whitelist test pages - DNA-96557 Links not opened from panel - DNA-96558 AdBlock bloks some trackers inside the panel - DNA-96568 [Player] Tidal in sidebar Player opens wrong site when logging in - DNA-96659 Siteprefs not applied after network service crash - DNA-96593 Promote O82 to stable - Complete Opera 82.0 changelog at: https://blogs.opera.com/desktop/changelog-for-82/ - Update to version 82.0.4227.13 - CHR-8668 Update chromium on desktop-stable-96-4227 to 96.0.4664.45 - DNA-76987 [Mac] Update desktop EULA with geolocation split - DNA-93388 Problem with symlinks on windows when creating file list - DNA-95734 Discarded Recently Closed items get revived after restart - DNA-96134 "Your profile has been updated" does not disappear - DNA-96190 Opera freezes when trying to drag expanded bookmark folder with nested subfolders - DNA-96223 Easy Files not working in Full Screen - DNA-96274 Checkout autofill shouldn't show used burner card - DNA-96275 Change the notification message for pausing multi-use cards - DNA-96295 "Video pop out" setting doesn't sync - DNA-96316 Highlight text wrong colour on dark mode - DNA-96326 Wrong translation Private Mode > Turkish - DNA-96351 macOS window controls are missing in full screen - DNA-96440 Update video URL - DNA-96448 add option to pin extension via rich hints - DNA-96453 Register user-chosen option on client-side, read on hint side - DNA-96454 Choosing an option from the settings menu should close the popup - DNA-96484 Enable AB test for a new autoupdater logic (for 50%) - DNA-96500 Add "don't show me again" prefs to allowed whitelist - DNA-96538 Inline audiocomplete for www.mediaexpert.pl incorrectly suggested - The update to chromium 96.0.4664.45 fixes following issues: CVE-2021-38005, CVE-2021-38006, CVE-2021-38007, CVE-2021-38008, CVE-2021-38009, CVE-2021-38010, CVE-2021-38011, CVE-2021-38012, CVE-2021-38013, CVE-2021-38014, CVE-2021-38015, CVE-2021-38016, CVE-2021-38017, CVE-2021-38019, CVE-2021-38020, CVE-2021-38021, CVE-2021-38022 - Update to version 81.0.4196.54 - CHR-8644 Update chromium on desktop-stable-95-4196 to 95.0.4638.69 - DNA-95773 ExtensionWebRequestApiTest crashes on mac - DNA-96062 Opera 81 translations - DNA-96134 ��Your profile has been updated�� does not disappear - DNA-96274 Checkout autofill shouldn��t show used burner card - DNA-96275 Change the notification message for pausing multi-use cards - DNA-96440 Update video URL - The update to chromium 95.0.4638.69 fixes following issues: CVE-2021-37997, CVE-2021-37998, CVE-2021-37999, CVE-2021-37980, CVE-2021-38001, CVE-2021-38002, CVE-2021-38003, CVE-2021-38004 - Update to version 81.0.4196.37 - DNA-96008 Crash at content::WebContentsImpl::OpenURL(content::OpenURLParams const&) - DNA-96032 Closing the videoconference pop-up force leaving the meeting - DNA-96092 Crash at void opera::ModalDialogViews::OnWidgetClosing(opera::ModalDialog::Result) - DNA-96142 [Yat] Emoji icon cut off in URL for Yat Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3:NonFree: zypper in -t patch openSUSE-2022-47=1 Package List: - openSUSE Leap 15.3:NonFree (x86_64): opera-83.0.4254.27-lp153.2.33.1 References: https://www.suse.com/security/cve/CVE-2021-37980.html https://www.suse.com/security/cve/CVE-2021-37997.html https://www.suse.com/security/cve/CVE-2021-37998.html https://www.suse.com/security/cve/CVE-2021-37999.html https://www.suse.com/security/cve/CVE-2021-38001.html https://www.suse.com/security/cve/CVE-2021-38002.html https://www.suse.com/security/cve/CVE-2021-38003.html https://www.suse.com/security/cve/CVE-2021-38004.html https://www.suse.com/security/cve/CVE-2021-38005.html https://www.suse.com/security/cve/CVE-2021-38006.html https://www.suse.com/security/cve/CVE-2021-38007.html https://www.suse.com/security/cve/CVE-2021-38008.html https://www.suse.com/security/cve/CVE-2021-38009.html https://www.suse.com/security/cve/CVE-2021-38010.html https://www.suse.com/security/cve/CVE-2021-38011.html https://www.suse.com/security/cve/CVE-2021-38012.html https://www.suse.com/security/cve/CVE-2021-38013.html https://www.suse.com/security/cve/CVE-2021-38014.html https://www.suse.com/security/cve/CVE-2021-38015.html https://www.suse.com/security/cve/CVE-2021-38016.html https://www.suse.com/security/cve/CVE-2021-38017.html https://www.suse.com/security/cve/CVE-2021-38019.html https://www.suse.com/security/cve/CVE-2021-38020.html https://www.suse.com/security/cve/CVE-2021-38021.html https://www.suse.com/security/cve/CVE-2021-38022.html https://www.suse.com/security/cve/CVE-2021-4052.html https://www.suse.com/security/cve/CVE-2021-4053.html https://www.suse.com/security/cve/CVE-2021-4054.html https://www.suse.com/security/cve/CVE-2021-4055.html https://www.suse.com/security/cve/CVE-2021-4056.html https://www.suse.com/security/cve/CVE-2021-4057.html https://www.suse.com/security/cve/CVE-2021-4058.html https://www.suse.com/security/cve/CVE-2021-4059.html https://www.suse.com/security/cve/CVE-2021-4061.html https://www.suse.com/security/cve/CVE-2021-4062.html https://www.suse.com/security/cve/CVE-2021-4063.html https://www.suse.com/security/cve/CVE-2021-4064.html https://www.suse.com/security/cve/CVE-2021-4065.html https://www.suse.com/security/cve/CVE-2021-4066.html https://www.suse.com/security/cve/CVE-2021-4067.html https://www.suse.com/security/cve/CVE-2021-4068.html https://www.suse.com/security/cve/CVE-2021-4078.html https://www.suse.com/security/cve/CVE-2021-4079.html https://www.suse.com/security/cve/CVE-2021-4098.html https://www.suse.com/security/cve/CVE-2021-4099.html https://www.suse.com/security/cve/CVE-2021-4100.html https://www.suse.com/security/cve/CVE-2021-4101.html https://www.suse.com/security/cve/CVE-2021-4102.html https://www.suse.com/security/cve/CVE-2022-0096.html https://www.suse.com/security/cve/CVE-2022-0097.html https://www.suse.com/security/cve/CVE-2022-0098.html https://www.suse.com/security/cve/CVE-2022-0099.html https://www.suse.com/security/cve/CVE-2022-0100.html https://www.suse.com/security/cve/CVE-2022-0101.html https://www.suse.com/security/cve/CVE-2022-0102.html https://www.suse.com/security/cve/CVE-2022-0103.html https://www.suse.com/security/cve/CVE-2022-0104.html https://www.suse.com/security/cve/CVE-2022-0105.html https://www.suse.com/security/cve/CVE-2022-0106.html https://www.suse.com/security/cve/CVE-2022-0107.html https://www.suse.com/security/cve/CVE-2022-0108.html https://www.suse.com/security/cve/CVE-2022-0109.html https://www.suse.com/security/cve/CVE-2022-0110.html https://www.suse.com/security/cve/CVE-2022-0111.html https://www.suse.com/security/cve/CVE-2022-0112.html https://www.suse.com/security/cve/CVE-2022-0113.html https://www.suse.com/security/cve/CVE-2022-0114.html https://www.suse.com/security/cve/CVE-2022-0115.html https://www.suse.com/security/cve/CVE-2022-0116.html https://www.suse.com/security/cve/CVE-2022-0117.html https://www.suse.com/security/cve/CVE-2022-0118.html https://www.suse.com/security/cve/CVE-2022-0120.html https://www.suse.com/security/cve/CVE-2022-0289.html https://www.suse.com/security/cve/CVE-2022-0290.html https://www.suse.com/security/cve/CVE-2022-0291.html https://www.suse.com/security/cve/CVE-2022-0292.html https://www.suse.com/security/cve/CVE-2022-0293.html https://www.suse.com/security/cve/CVE-2022-0294.html https://www.suse.com/security/cve/CVE-2022-0295.html https://www.suse.com/security/cve/CVE-2022-0296.html https://www.suse.com/security/cve/CVE-2022-0297.html https://www.suse.com/security/cve/CVE-2022-0298.html https://www.suse.com/security/cve/CVE-2022-0300.html https://www.suse.com/security/cve/CVE-2022-0301.html https://www.suse.com/security/cve/CVE-2022-0302.html https://www.suse.com/security/cve/CVE-2022-0304.html https://www.suse.com/security/cve/CVE-2022-0305.html https://www.suse.com/security/cve/CVE-2022-0306.html https://www.suse.com/security/cve/CVE-2022-0307.html https://www.suse.com/security/cve/CVE-2022-0308.html https://www.suse.com/security/cve/CVE-2022-0309.html https://www.suse.com/security/cve/CVE-2022-0310.html https://www.suse.com/security/cve/CVE-2022-0311.html

1 0

openSUSE-SU-2022:0045-1: moderate: Security update for jaw
by opensuse-security＠opensuse.org 21 Feb '22

21 Feb '22

openSUSE Security Update: Security update for jaw ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0045-1 Rating: moderate References: #1194358 Cross-References: CVE-2022-21653 CVSS scores: CVE-2022-21653 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Backports SLE-15-SP2 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: jawn was updated to fix: * CVE-2022-21653: DoS caused by a hash collision in SimpleFacade and MutableFacade (bsc#1194358) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15-SP2: zypper in -t patch openSUSE-2022-45=1 Package List: - openSUSE Backports SLE-15-SP2 (noarch): jawn-ast-0.14.1-bp152.2.3.1 jawn-json4s-0.14.1-bp152.2.3.1 jawn-parser-0.14.1-bp152.2.3.1 jawn-util-0.14.1-bp152.2.3.1 References: https://www.suse.com/security/cve/CVE-2022-21653.html https://bugzilla.suse.com/1194358

1 0

openSUSE-SU-2022:0525-1: moderate: Security update for polkit
by opensuse-security＠opensuse.org 21 Feb '22

21 Feb '22

openSUSE Security Update: Security update for polkit ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0525-1 Rating: moderate References: #1195542 Cross-References: CVE-2021-4115 CVSS scores: CVE-2021-4115 (SUSE): 3.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for polkit fixes the following issues: - CVE-2021-4115: Fixed a denial of service via file descriptor leak (bsc#1195542). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-525=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-525=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): libpolkit0-0.116-3.9.1 libpolkit0-debuginfo-0.116-3.9.1 polkit-0.116-3.9.1 polkit-debuginfo-0.116-3.9.1 polkit-debugsource-0.116-3.9.1 polkit-devel-0.116-3.9.1 polkit-devel-debuginfo-0.116-3.9.1 typelib-1_0-Polkit-1_0-0.116-3.9.1 - openSUSE Leap 15.4 (noarch): polkit-doc-0.116-3.9.1 - openSUSE Leap 15.4 (x86_64): libpolkit0-32bit-0.116-3.9.1 libpolkit0-32bit-debuginfo-0.116-3.9.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): libpolkit0-0.116-3.9.1 libpolkit0-debuginfo-0.116-3.9.1 polkit-0.116-3.9.1 polkit-debuginfo-0.116-3.9.1 polkit-debugsource-0.116-3.9.1 polkit-devel-0.116-3.9.1 polkit-devel-debuginfo-0.116-3.9.1 typelib-1_0-Polkit-1_0-0.116-3.9.1 - openSUSE Leap 15.3 (noarch): polkit-doc-0.116-3.9.1 - openSUSE Leap 15.3 (x86_64): libpolkit0-32bit-0.116-3.9.1 libpolkit0-32bit-debuginfo-0.116-3.9.1 References: https://www.suse.com/security/cve/CVE-2021-4115.html https://bugzilla.suse.com/1195542

1 0

openSUSE-SU-2022:0498-1: important: Security update for expat
by opensuse-security＠opensuse.org 18 Feb '22

18 Feb '22

openSUSE Security Update: Security update for expat ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0498-1 Rating: important References: #1195054 #1195217 Cross-References: CVE-2022-23852 CVE-2022-23990 CVSS scores: CVE-2022-23852 (NVD) : 9.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-23852 (SUSE): 8.1 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-23990 (NVD) : 9.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-23990 (SUSE): 8.1 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for expat fixes the following issues: - CVE-2022-23852: Fixed signed integer overflow in XML_GetBuffer (bsc#1195054). - CVE-2022-23990: Fixed integer overflow in the doProlog function (bsc#1195217). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-498=1 Package List: - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): expat-2.2.5-3.12.1 expat-debuginfo-2.2.5-3.12.1 expat-debugsource-2.2.5-3.12.1 libexpat-devel-2.2.5-3.12.1 libexpat1-2.2.5-3.12.1 libexpat1-debuginfo-2.2.5-3.12.1 - openSUSE Leap 15.3 (x86_64): expat-32bit-debuginfo-2.2.5-3.12.1 libexpat-devel-32bit-2.2.5-3.12.1 libexpat1-32bit-2.2.5-3.12.1 libexpat1-32bit-debuginfo-2.2.5-3.12.1 References: https://www.suse.com/security/cve/CVE-2022-23852.html https://www.suse.com/security/cve/CVE-2022-23990.html https://bugzilla.suse.com/1195054 https://bugzilla.suse.com/1195217

1 0

openSUSE-SU-2022:0210-2: Security update for qemu
by opensuse-security＠opensuse.org 18 Feb '22

18 Feb '22

openSUSE Security Update: Security update for qemu ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0210-2 Rating: low References: #1172033 #1181361 Cross-References: CVE-2020-13253 CVE-2021-20196 CVSS scores: CVE-2020-13253 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2020-13253 (SUSE): 3.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L CVE-2021-20196 (NVD) : 6.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H CVE-2021-20196 (SUSE): 3.2 CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:N/I:N/A:L Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for qemu fixes the following issues: - CVE-2020-13253: Fixed an OOB access that could crash the guest resulting in DoS (bsc#1172033) - CVE-2021-20196: Fixed null pointer dereference that may lead to guest crash (bsc#1181361). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-210=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): qemu-s390-4.2.1-11.34.2 qemu-s390-debuginfo-4.2.1-11.34.2 References: https://www.suse.com/security/cve/CVE-2020-13253.html https://www.suse.com/security/cve/CVE-2021-20196.html https://bugzilla.suse.com/1172033 https://bugzilla.suse.com/1181361

1 0

openSUSE-SU-2022:0492-1: important: Security update for strongswan
by opensuse-security＠opensuse.org 18 Feb '22

18 Feb '22

openSUSE Security Update: Security update for strongswan ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0492-1 Rating: important References: #1194471 Cross-References: CVE-2021-45079 CVSS scores: CVE-2021-45079 (NVD) : 9.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H CVE-2021-45079 (SUSE): 6.5 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:L Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for strongswan fixes the following issues: - CVE-2021-45079: Fixed authentication bypass in EAP authentication. (bsc#1194471) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-492=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-492=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): strongswan-5.8.2-11.24.1 strongswan-debuginfo-5.8.2-11.24.1 strongswan-debugsource-5.8.2-11.24.1 strongswan-hmac-5.8.2-11.24.1 strongswan-ipsec-5.8.2-11.24.1 strongswan-ipsec-debuginfo-5.8.2-11.24.1 strongswan-libs0-5.8.2-11.24.1 strongswan-libs0-debuginfo-5.8.2-11.24.1 strongswan-mysql-5.8.2-11.24.1 strongswan-mysql-debuginfo-5.8.2-11.24.1 strongswan-nm-5.8.2-11.24.1 strongswan-nm-debuginfo-5.8.2-11.24.1 strongswan-sqlite-5.8.2-11.24.1 strongswan-sqlite-debuginfo-5.8.2-11.24.1 - openSUSE Leap 15.4 (noarch): strongswan-doc-5.8.2-11.24.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): strongswan-5.8.2-11.24.1 strongswan-debuginfo-5.8.2-11.24.1 strongswan-debugsource-5.8.2-11.24.1 strongswan-hmac-5.8.2-11.24.1 strongswan-ipsec-5.8.2-11.24.1 strongswan-ipsec-debuginfo-5.8.2-11.24.1 strongswan-libs0-5.8.2-11.24.1 strongswan-libs0-debuginfo-5.8.2-11.24.1 strongswan-mysql-5.8.2-11.24.1 strongswan-mysql-debuginfo-5.8.2-11.24.1 strongswan-nm-5.8.2-11.24.1 strongswan-nm-debuginfo-5.8.2-11.24.1 strongswan-sqlite-5.8.2-11.24.1 strongswan-sqlite-debuginfo-5.8.2-11.24.1 - openSUSE Leap 15.3 (noarch): strongswan-doc-5.8.2-11.24.1 References: https://www.suse.com/security/cve/CVE-2021-45079.html https://bugzilla.suse.com/1194471

1 0

openSUSE-SU-2022:0493-1: important: Security update for clamav
by opensuse-security＠opensuse.org 18 Feb '22

18 Feb '22

openSUSE Security Update: Security update for clamav ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0493-1 Rating: important References: #1194731 Cross-References: CVE-2022-20698 CVSS scores: CVE-2022-20698 (SUSE): 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for clamav fixes the following issues: - CVE-2022-20698: Fixed invalid pointer read allowing denial of service crash. (bsc#1194731) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-493=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-493=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): clamav-0.103.5-3.35.1 clamav-debuginfo-0.103.5-3.35.1 clamav-debugsource-0.103.5-3.35.1 clamav-devel-0.103.5-3.35.1 libclamav9-0.103.5-3.35.1 libclamav9-debuginfo-0.103.5-3.35.1 libfreshclam2-0.103.5-3.35.1 libfreshclam2-debuginfo-0.103.5-3.35.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): clamav-0.103.5-3.35.1 clamav-debuginfo-0.103.5-3.35.1 clamav-debugsource-0.103.5-3.35.1 clamav-devel-0.103.5-3.35.1 libclamav9-0.103.5-3.35.1 libclamav9-debuginfo-0.103.5-3.35.1 libfreshclam2-0.103.5-3.35.1 libfreshclam2-debuginfo-0.103.5-3.35.1 References: https://www.suse.com/security/cve/CVE-2022-20698.html https://bugzilla.suse.com/1194731

1 0

openSUSE-SU-2022:0503-1: important: Security update for xerces-j2
by opensuse-security＠opensuse.org 18 Feb '22

18 Feb '22

openSUSE Security Update: Security update for xerces-j2 ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0503-1 Rating: important References: #1195108 Cross-References: CVE-2022-23437 CVSS scores: CVE-2022-23437 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2022-23437 (SUSE): 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for xerces-j2 fixes the following issues: - CVE-2022-23437: Fixed infinite loop within Apache XercesJ xml parser (bsc#1195108). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-503=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-503=1 Package List: - openSUSE Leap 15.4 (noarch): xerces-j2-2.12.0-3.3.1 xerces-j2-demo-2.12.0-3.3.1 xerces-j2-javadoc-2.12.0-3.3.1 - openSUSE Leap 15.3 (noarch): xerces-j2-2.12.0-3.3.1 xerces-j2-demo-2.12.0-3.3.1 xerces-j2-javadoc-2.12.0-3.3.1 References: https://www.suse.com/security/cve/CVE-2022-23437.html https://bugzilla.suse.com/1195108

1 0

openSUSE-SU-2022:0500-1: important: Security update for xerces-j2
by opensuse-security＠opensuse.org 18 Feb '22

18 Feb '22

openSUSE Security Update: Security update for xerces-j2 ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0500-1 Rating: important References: #1195108 Cross-References: CVE-2022-23437 CVSS scores: CVE-2022-23437 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2022-23437 (SUSE): 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for xerces-j2 fixes the following issues: - CVE-2022-23437: Fixed infinite loop within Apache XercesJ xml parser (bsc#1195108). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-500=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-500=1 Package List: - openSUSE Leap 15.4 (noarch): xerces-j2-scripts-2.11.0-4.3.1 xerces-j2-xml-apis-2.11.0-4.3.1 xerces-j2-xml-resolver-2.11.0-4.3.1 - openSUSE Leap 15.3 (noarch): xerces-j2-scripts-2.11.0-4.3.1 xerces-j2-xml-apis-2.11.0-4.3.1 xerces-j2-xml-resolver-2.11.0-4.3.1 References: https://www.suse.com/security/cve/CVE-2022-23437.html https://bugzilla.suse.com/1195108

1 0

openSUSE-SU-2022:0491-1: moderate: Security update for rust
by opensuse-security＠opensuse.org 18 Feb '22

18 Feb '22

openSUSE Security Update: Security update for rust ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0491-1 Rating: moderate References: #1194767 Cross-References: CVE-2022-21658 CVSS scores: CVE-2022-21658 (NVD) : 6.3 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:H CVE-2022-21658 (SUSE): 6.2 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for rust fixes the following issues: - CVE-2022-21658: Fixed race condition in std::fs::remove_dir_all (bsc#1194767). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-491=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-491=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): cargo-debuginfo-1.53.0-22.1 rust-debuginfo-1.53.0-22.1 - openSUSE Leap 15.4 (aarch64 x86_64): rls-debuginfo-1.53.0-22.1 rust-analysis-1.53.0-22.1 rust-doc-1.53.0-22.1 - openSUSE Leap 15.4 (noarch): cargo-doc-1.53.0-22.1 rust-src-1.53.0-22.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): cargo-debuginfo-1.53.0-22.1 rust-debuginfo-1.53.0-22.1 - openSUSE Leap 15.3 (aarch64 x86_64): rls-debuginfo-1.53.0-22.1 rust-analysis-1.53.0-22.1 rust-doc-1.53.0-22.1 - openSUSE Leap 15.3 (noarch): cargo-doc-1.53.0-22.1 rust-src-1.53.0-22.1 References: https://www.suse.com/security/cve/CVE-2022-21658.html https://bugzilla.suse.com/1194767

1 0

openSUSE-SU-2022:0499-1: important: Security update for python-Twisted
by opensuse-security＠opensuse.org 18 Feb '22

18 Feb '22

openSUSE Security Update: Security update for python-Twisted ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0499-1 Rating: important References: #1195667 Cross-References: CVE-2022-21712 CVSS scores: CVE-2022-21712 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N CVE-2022-21712 (SUSE): 7.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:L/A:N Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for python-Twisted fixes the following issues: - CVE-2022-21712: Fixed secret exposure in cross-origin redirects by properly removing sensitive headers when redirecting to a different origin (bsc#1195667). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-499=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-499=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): python-Twisted-debuginfo-19.10.0-3.6.1 python-Twisted-debugsource-19.10.0-3.6.1 python2-Twisted-19.10.0-3.6.1 python2-Twisted-debuginfo-19.10.0-3.6.1 python3-Twisted-debuginfo-19.10.0-3.6.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): python-Twisted-debuginfo-19.10.0-3.6.1 python-Twisted-debugsource-19.10.0-3.6.1 python-Twisted-doc-19.10.0-3.6.1 python2-Twisted-19.10.0-3.6.1 python2-Twisted-debuginfo-19.10.0-3.6.1 python3-Twisted-19.10.0-3.6.1 python3-Twisted-debuginfo-19.10.0-3.6.1 References: https://www.suse.com/security/cve/CVE-2022-21712.html https://bugzilla.suse.com/1195667

1 0

openSUSE-SU-2022:0069-2: Security update for libmspack
by opensuse-security＠opensuse.org 18 Feb '22

18 Feb '22

openSUSE Security Update: Security update for libmspack ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0069-2 Rating: low References: #1113040 Cross-References: CVE-2018-18586 CVSS scores: CVE-2018-18586 (NVD) : 5.3 CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for libmspack fixes the following issues: - CVE-2018-18586: Fixed directory traversal in chmextract by adding anti "../" and leading slash protection (bsc#1113040). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-69=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): libmspack-debugsource-0.6-3.14.1 libmspack-devel-0.6-3.14.1 libmspack0-0.6-3.14.1 libmspack0-debuginfo-0.6-3.14.1 mspack-tools-0.6-3.14.1 mspack-tools-debuginfo-0.6-3.14.1 - openSUSE Leap 15.4 (x86_64): libmspack0-32bit-0.6-3.14.1 libmspack0-32bit-debuginfo-0.6-3.14.1 References: https://www.suse.com/security/cve/CVE-2018-18586.html https://bugzilla.suse.com/1113040

1 0

openSUSE-SU-2022:0052-2: important: Security update for libsndfile
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for libsndfile ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0052-2 Rating: important References: #1194006 Cross-References: CVE-2021-4156 CVSS scores: CVE-2021-4156 (SUSE): 6.1 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:H Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for libsndfile fixes the following issues: - CVE-2021-4156: Fixed heap buffer overflow in flac_buffer_copy that could potentially lead to heap exploitation (bsc#1194006). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-52=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): libsndfile-debugsource-1.0.28-5.15.1 libsndfile-devel-1.0.28-5.15.1 libsndfile-progs-1.0.28-5.15.1 libsndfile-progs-debuginfo-1.0.28-5.15.1 libsndfile-progs-debugsource-1.0.28-5.15.1 libsndfile1-1.0.28-5.15.1 libsndfile1-debuginfo-1.0.28-5.15.1 - openSUSE Leap 15.4 (x86_64): libsndfile1-32bit-1.0.28-5.15.1 libsndfile1-32bit-debuginfo-1.0.28-5.15.1 References: https://www.suse.com/security/cve/CVE-2021-4156.html https://bugzilla.suse.com/1194006

1 0

openSUSE-SU-2022:0150-2: important: Security update for aide
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for aide ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0150-2 Rating: important References: #1194735 Cross-References: CVE-2021-45417 CVSS scores: CVE-2021-45417 (SUSE): 7 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for aide fixes the following issues: - CVE-2021-45417: Fix a bufferoverflow in base64 functions (bsc#1194735) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-150=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): aide-0.16-24.1 aide-debuginfo-0.16-24.1 aide-debugsource-0.16-24.1 aide-test-0.16-24.1 References: https://www.suse.com/security/cve/CVE-2021-45417.html https://bugzilla.suse.com/1194735

1 0

openSUSE-SU-2022:0043-1: moderate: Security update for htmldoc
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for htmldoc ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0043-1 Rating: moderate References: #1178561 #1190515 #1192357 #1194178 #1194487 #1195758 Cross-References: CVE-2021-3997 CVE-2021-40985 CVE-2021-43579 CVE-2022-0534 CVSS scores: CVE-2021-3997 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-40985 (SUSE): 3.3 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L CVE-2021-43579 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2022-0534 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2022-0534 (SUSE): 6.1 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:H Affected Products: openSUSE Backports SLE-15-SP3 openSUSE Leap 15.3 ______________________________________________________________________________ An update that solves four vulnerabilities and has two fixes is now available. Description: htmldoc was updated to fix issues: - CVE-2021-40985: Fixed buffer overflow may lead to DoS via a crafted BMP image (bsc#1192357) - CVE-2021-43579: Fixed stack-based buffer overflow in image_load_bmp() results in remote code execution if the victim converts an HTML document linking to a crafted BMP file (bsc#1194487) - CVE-2022-0534: Fixed stack out-of-bounds read in gif_get_code() when opening a malicious GIF file results in a segmentation fault (bsc#1195758) Special Instructions and Notes: Please reboot the system after installing this update. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-43=1 - openSUSE Backports SLE-15-SP3: zypper in -t patch openSUSE-2022-43=1 Package List: - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): libsystemd0-246.16-7.33.1 libsystemd0-debuginfo-246.16-7.33.1 libudev-devel-246.16-7.33.1 libudev1-246.16-7.33.1 libudev1-debuginfo-246.16-7.33.1 nss-myhostname-246.16-7.33.1 nss-myhostname-debuginfo-246.16-7.33.1 nss-mymachines-246.16-7.33.1 nss-mymachines-debuginfo-246.16-7.33.1 nss-resolve-246.16-7.33.1 nss-resolve-debuginfo-246.16-7.33.1 nss-systemd-246.16-7.33.1 nss-systemd-debuginfo-246.16-7.33.1 systemd-246.16-7.33.1 systemd-container-246.16-7.33.1 systemd-container-debuginfo-246.16-7.33.1 systemd-coredump-246.16-7.33.1 systemd-coredump-debuginfo-246.16-7.33.1 systemd-debuginfo-246.16-7.33.1 systemd-debugsource-246.16-7.33.1 systemd-devel-246.16-7.33.1 systemd-doc-246.16-7.33.1 systemd-journal-remote-246.16-7.33.1 systemd-journal-remote-debuginfo-246.16-7.33.1 systemd-logger-246.16-7.33.1 systemd-network-246.16-7.33.1 systemd-network-debuginfo-246.16-7.33.1 systemd-sysvinit-246.16-7.33.1 udev-246.16-7.33.1 udev-debuginfo-246.16-7.33.1 - openSUSE Leap 15.3 (x86_64): libsystemd0-32bit-246.16-7.33.1 libsystemd0-32bit-debuginfo-246.16-7.33.1 libudev-devel-32bit-246.16-7.33.1 libudev1-32bit-246.16-7.33.1 libudev1-32bit-debuginfo-246.16-7.33.1 nss-myhostname-32bit-246.16-7.33.1 nss-myhostname-32bit-debuginfo-246.16-7.33.1 nss-mymachines-32bit-246.16-7.33.1 nss-mymachines-32bit-debuginfo-246.16-7.33.1 systemd-32bit-246.16-7.33.1 systemd-32bit-debuginfo-246.16-7.33.1 - openSUSE Leap 15.3 (noarch): systemd-lang-246.16-7.33.1 - openSUSE Backports SLE-15-SP3 (aarch64 i586 ppc64le s390x x86_64): htmldoc-1.9.12-bp153.2.6.1 References: https://www.suse.com/security/cve/CVE-2021-3997.html https://www.suse.com/security/cve/CVE-2021-40985.html https://www.suse.com/security/cve/CVE-2021-43579.html https://www.suse.com/security/cve/CVE-2022-0534.html https://bugzilla.suse.com/1178561 https://bugzilla.suse.com/1190515 https://bugzilla.suse.com/1192357 https://bugzilla.suse.com/1194178 https://bugzilla.suse.com/1194487 https://bugzilla.suse.com/1195758

1 0

openSUSE-SU-2022:0042-1: important: Security update for chromium
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for chromium ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0042-1 Rating: important References: #1195986 Cross-References: CVE-2022-0603 CVE-2022-0604 CVE-2022-0605 CVE-2022-0606 CVE-2022-0607 CVE-2022-0608 CVE-2022-0609 CVE-2022-0610 Affected Products: openSUSE Backports SLE-15-SP3 ______________________________________________________________________________ An update that fixes 8 vulnerabilities is now available. Description: This update for chromium fixes the following issues: - Chromium 98.0.4758.102 (boo#1195986) * CVE-2022-0603: Use after free in File Manager * CVE-2022-0604: Heap buffer overflow in Tab Groups * CVE-2022-0605: Use after free in Webstore API * CVE-2022-0606: Use after free in ANGLE * CVE-2022-0607: Use after free in GPU * CVE-2022-0608: Integer overflow in Mojo * CVE-2022-0609: Use after free in Animation * CVE-2022-0610: Inappropriate implementation in Gamepad API * Various fixes from internal audits, fuzzing and other initiatives Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15-SP3: zypper in -t patch openSUSE-2022-42=1 Package List: - openSUSE Backports SLE-15-SP3 (aarch64 x86_64): chromedriver-98.0.4758.102-bp153.2.63.1 chromium-98.0.4758.102-bp153.2.63.1 References: https://www.suse.com/security/cve/CVE-2022-0603.html https://www.suse.com/security/cve/CVE-2022-0604.html https://www.suse.com/security/cve/CVE-2022-0605.html https://www.suse.com/security/cve/CVE-2022-0606.html https://www.suse.com/security/cve/CVE-2022-0607.html https://www.suse.com/security/cve/CVE-2022-0608.html https://www.suse.com/security/cve/CVE-2022-0609.html https://www.suse.com/security/cve/CVE-2022-0610.html https://bugzilla.suse.com/1195986

1 0

openSUSE-SU-2022:0480-1: important: Security update for tiff
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for tiff ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0480-1 Rating: important References: #1071031 #1154365 #1182808 #1182809 #1182811 #1182812 #1190312 #1194539 Cross-References: CVE-2017-17095 CVE-2019-17546 CVE-2020-19131 CVE-2020-35521 CVE-2020-35522 CVE-2020-35523 CVE-2020-35524 CVE-2022-22844 CVSS scores: CVE-2017-17095 (NVD) : 8.8 CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2017-17095 (SUSE): 8.1 CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2019-17546 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2019-17546 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-19131 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2020-19131 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-35521 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-35521 (SUSE): 4.4 CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H CVE-2020-35522 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-35522 (SUSE): 4.4 CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H CVE-2020-35523 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-35523 (SUSE): 6.7 CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H CVE-2020-35524 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-35524 (SUSE): 6.7 CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H CVE-2022-22844 (SUSE): 5.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes 8 vulnerabilities is now available. Description: This update for tiff fixes the following issues: - CVE-2017-17095: Fixed DoS in tools/pal2rgb.c in pal2rgb (bsc#1071031). - CVE-2019-17546: Fixed integer overflow that potentially causes a heap-based buffer overflow via a crafted RGBA image (bsc#1154365). - CVE-2020-19131: Fixed buffer overflow in tiffcrop that may cause DoS via the invertImage() function (bsc#1190312). - CVE-2020-35521: Fixed memory allocation failure in tif_read.c (bsc#1182808). - CVE-2020-35522: Fixed memory allocation failure in tif_pixarlog.c (bsc#1182809). - CVE-2020-35523: Fixed integer overflow in tif_getimage.c (bsc#1182811). - CVE-2020-35524: Fixed heap-based buffer overflow in TIFF2PDF tool (bsc#1182812). - CVE-2022-22844: Fixed out-of-bounds read in _TIFFmemcpy in tif_unix.c (bsc#1194539). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-480=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-480=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): libtiff-devel-4.0.9-45.5.1 libtiff5-4.0.9-45.5.1 libtiff5-debuginfo-4.0.9-45.5.1 tiff-4.0.9-45.5.1 tiff-debuginfo-4.0.9-45.5.1 tiff-debugsource-4.0.9-45.5.1 - openSUSE Leap 15.4 (x86_64): libtiff-devel-32bit-4.0.9-45.5.1 libtiff5-32bit-4.0.9-45.5.1 libtiff5-32bit-debuginfo-4.0.9-45.5.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): libtiff-devel-4.0.9-45.5.1 libtiff5-4.0.9-45.5.1 libtiff5-debuginfo-4.0.9-45.5.1 tiff-4.0.9-45.5.1 tiff-debuginfo-4.0.9-45.5.1 tiff-debugsource-4.0.9-45.5.1 - openSUSE Leap 15.3 (x86_64): libtiff-devel-32bit-4.0.9-45.5.1 libtiff5-32bit-4.0.9-45.5.1 libtiff5-32bit-debuginfo-4.0.9-45.5.1 References: https://www.suse.com/security/cve/CVE-2017-17095.html https://www.suse.com/security/cve/CVE-2019-17546.html https://www.suse.com/security/cve/CVE-2020-19131.html https://www.suse.com/security/cve/CVE-2020-35521.html https://www.suse.com/security/cve/CVE-2020-35522.html https://www.suse.com/security/cve/CVE-2020-35523.html https://www.suse.com/security/cve/CVE-2020-35524.html https://www.suse.com/security/cve/CVE-2022-22844.html https://bugzilla.suse.com/1071031 https://bugzilla.suse.com/1154365 https://bugzilla.suse.com/1182808 https://bugzilla.suse.com/1182809 https://bugzilla.suse.com/1182811 https://bugzilla.suse.com/1182812 https://bugzilla.suse.com/1190312 https://bugzilla.suse.com/1194539

1 0

openSUSE-SU-2022:0479-1: important: Security update for virglrenderer
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for virglrenderer ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0479-1 Rating: important References: #1195389 Cross-References: CVE-2022-0135 CVSS scores: CVE-2022-0135 (SUSE): 7.5 CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for virglrenderer fixes the following issues: - CVE-2022-0135: Fixed out-of-bonds write in read_transfer_data() (bsc#1195389). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-479=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-479=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): libvirglrenderer0-0.6.0-4.9.1 libvirglrenderer0-debuginfo-0.6.0-4.9.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): libvirglrenderer0-0.6.0-4.9.1 libvirglrenderer0-debuginfo-0.6.0-4.9.1 virglrenderer-debuginfo-0.6.0-4.9.1 virglrenderer-debugsource-0.6.0-4.9.1 virglrenderer-devel-0.6.0-4.9.1 virglrenderer-test-server-0.6.0-4.9.1 virglrenderer-test-server-debuginfo-0.6.0-4.9.1 References: https://www.suse.com/security/cve/CVE-2022-0135.html https://bugzilla.suse.com/1195389

1 0

openSUSE-SU-2022:0040-1: important: Security update for kafka
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for kafka ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0040-1 Rating: important References: #1190587 #1190839 #1193662 #1193930 #1194842 #1194843 #1194844 Cross-References: CVE-2021-4104 CVE-2021-43565 CVE-2022-23302 CVE-2022-23305 CVE-2022-23307 CVSS scores: CVE-2021-4104 (NVD) : 7.5 CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-4104 (SUSE): 6.4 CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H CVE-2021-43565 (SUSE): 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2022-23302 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2022-23302 (SUSE): 6.6 CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H CVE-2022-23305 (NVD) : 9.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-23305 (SUSE): 8.1 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-23307 (SUSE): 8.1 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H Affected Products: openSUSE Backports SLE-15-SP2 openSUSE Leap 15.3 ______________________________________________________________________________ An update that solves 5 vulnerabilities and has two fixes is now available. Description: This update for kafka, kafka-kit fixes following issues: - Remove JDBCAppender, JMSSink, chainsaw from log4j jars during build to prevent bsc#1194842, CVE-2022-23302, bsc#1194843, CVE-2022-23305, bsc#1194844, CVE-2022-23307 - Rebuild with kafka-kit change to Remove JMSAppender from log4j jars during build to prevent bsc#1193662, CVE-2021-4104 Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-40=1 - openSUSE Backports SLE-15-SP2: zypper in -t patch openSUSE-2022-40=1 Package List: - openSUSE Leap 15.3 (x86_64): kubevirt-container-disk-0.45.0-8.7.1 kubevirt-container-disk-debuginfo-0.45.0-8.7.1 kubevirt-manifests-0.45.0-8.7.1 kubevirt-tests-0.45.0-8.7.1 kubevirt-tests-debuginfo-0.45.0-8.7.1 kubevirt-virt-api-0.45.0-8.7.1 kubevirt-virt-api-debuginfo-0.45.0-8.7.1 kubevirt-virt-controller-0.45.0-8.7.1 kubevirt-virt-controller-debuginfo-0.45.0-8.7.1 kubevirt-virt-handler-0.45.0-8.7.1 kubevirt-virt-handler-debuginfo-0.45.0-8.7.1 kubevirt-virt-launcher-0.45.0-8.7.1 kubevirt-virt-launcher-debuginfo-0.45.0-8.7.1 kubevirt-virt-operator-0.45.0-8.7.1 kubevirt-virt-operator-debuginfo-0.45.0-8.7.1 kubevirt-virtctl-0.45.0-8.7.1 kubevirt-virtctl-debuginfo-0.45.0-8.7.1 obs-service-kubevirt_containers_meta-0.45.0-8.7.1 - openSUSE Backports SLE-15-SP2 (aarch64 ppc64le s390x x86_64): kafka-source-2.1.0-bp152.2.3.1 - openSUSE Backports SLE-15-SP2 (x86_64): kafka-kit-2.1.0-bp152.2.3.1 References: https://www.suse.com/security/cve/CVE-2021-4104.html https://www.suse.com/security/cve/CVE-2021-43565.html https://www.suse.com/security/cve/CVE-2022-23302.html https://www.suse.com/security/cve/CVE-2022-23305.html https://www.suse.com/security/cve/CVE-2022-23307.html https://bugzilla.suse.com/1190587 https://bugzilla.suse.com/1190839 https://bugzilla.suse.com/1193662 https://bugzilla.suse.com/1193930 https://bugzilla.suse.com/1194842 https://bugzilla.suse.com/1194843 https://bugzilla.suse.com/1194844

1 0

openSUSE-SU-2021:4136-2: important: Security update for xorg-x11-server
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for xorg-x11-server ______________________________________________________________________________ Announcement ID: openSUSE-SU-2021:4136-2 Rating: important References: #1190487 #1190488 #1190489 Cross-References: CVE-2021-4009 CVE-2021-4010 CVE-2021-4011 CVSS scores: CVE-2021-4009 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-4010 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-4011 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes three vulnerabilities is now available. Description: This update for xorg-x11-server fixes the following issues: - CVE-2021-4009: The handler for the CreatePointerBarrier request of the XFixes extension does not properly validate the request length leading to out of bounds memory write. (bsc#1190487) - CVE-2021-4010: The handler for the Suspend request of the Screen Saver extension does not properly validate the request length leading to out of bounds memory write. (bsc#1190488) - CVE-2021-4011: The handlers for the RecordCreateContext and RecordRegisterClients requests of the Record extension do not properly validate the request length leading to out of bounds memory write. (bsc#1190489) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-465=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): xorg-x11-server-wayland-1.20.3-22.5.42.1 xorg-x11-server-wayland-debuginfo-1.20.3-22.5.42.1 References: https://www.suse.com/security/cve/CVE-2021-4009.html https://www.suse.com/security/cve/CVE-2021-4010.html https://www.suse.com/security/cve/CVE-2021-4011.html https://bugzilla.suse.com/1190487 https://bugzilla.suse.com/1190488 https://bugzilla.suse.com/1190489

1 0

openSUSE-SU-2022:0182-2: important: Security update for webkit2gtk3
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for webkit2gtk3 ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0182-2 Rating: important References: #1194019 Cross-References: CVE-2019-8766 CVE-2019-8782 CVE-2019-8808 CVE-2019-8815 CVE-2020-13753 CVE-2020-27918 CVE-2020-29623 CVE-2020-3902 CVE-2020-9802 CVE-2020-9803 CVE-2020-9805 CVE-2020-9947 CVE-2020-9948 CVE-2020-9951 CVE-2020-9952 CVE-2021-1765 CVE-2021-1788 CVE-2021-1817 CVE-2021-1820 CVE-2021-1825 CVE-2021-1826 CVE-2021-1844 CVE-2021-1871 CVE-2021-30661 CVE-2021-30666 CVE-2021-30682 CVE-2021-30761 CVE-2021-30762 CVE-2021-30809 CVE-2021-30818 CVE-2021-30823 CVE-2021-30836 CVE-2021-30846 CVE-2021-30848 CVE-2021-30849 CVE-2021-30851 CVE-2021-30858 CVE-2021-30884 CVE-2021-30887 CVE-2021-30888 CVE-2021-30889 CVE-2021-30890 CVE-2021-30897 CVSS scores: CVE-2019-8766 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2019-8766 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2019-8782 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2019-8782 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2019-8808 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2019-8808 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2019-8815 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2019-8815 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-13753 (NVD) : 10 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H CVE-2020-13753 (SUSE): 6.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L CVE-2020-27918 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-27918 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-29623 (NVD) : 3.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N CVE-2020-29623 (SUSE): 3.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N CVE-2020-3902 (NVD) : 6.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N CVE-2020-3902 (SUSE): 6.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N CVE-2020-9802 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-9802 (SUSE): 6.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L CVE-2020-9803 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-9803 (SUSE): 6.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L CVE-2020-9805 (NVD) : 7.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:L CVE-2020-9805 (SUSE): 7.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:L CVE-2020-9947 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-9947 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-9948 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-9951 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-9951 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-9952 (NVD) : 7.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:L CVE-2020-9952 (SUSE): 6.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N CVE-2021-1765 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N CVE-2021-1765 (SUSE): 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N CVE-2021-1788 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-1788 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-1844 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-1844 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-1871 (NVD) : 9.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2021-1871 (SUSE): 9.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2021-30809 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30809 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30818 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30818 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30823 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N CVE-2021-30823 (SUSE): 6.5 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N CVE-2021-30836 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2021-30836 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2021-30846 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30846 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30848 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30848 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30849 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30849 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30851 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30851 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30858 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30858 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30884 (NVD) : 4.7 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:N/A:N CVE-2021-30884 (SUSE): 4.7 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:N/A:N CVE-2021-30887 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N CVE-2021-30887 (SUSE): 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N CVE-2021-30888 (NVD) : 7.4 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N CVE-2021-30888 (SUSE): 7.4 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N CVE-2021-30889 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30889 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-30890 (NVD) : 6.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N CVE-2021-30890 (SUSE): 6.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N CVE-2021-30897 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N CVE-2021-30897 (SUSE): 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes 43 vulnerabilities is now available. Description: This update for webkit2gtk3 fixes the following issues: - Update to version 2.34.3 (bsc#1194019). - CVE-2021-30887: Fixed logic issue allowing unexpectedly unenforced Content Security Policy when processing maliciously crafted web content. - CVE-2021-30890: Fixed logic issue allowing universal cross site scripting when processing maliciously crafted web content. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-182=1 Package List: - openSUSE Leap 15.4 (noarch): libwebkit2gtk3-lang-2.34.3-23.3 References: https://www.suse.com/security/cve/CVE-2019-8766.html https://www.suse.com/security/cve/CVE-2019-8782.html https://www.suse.com/security/cve/CVE-2019-8808.html https://www.suse.com/security/cve/CVE-2019-8815.html https://www.suse.com/security/cve/CVE-2020-13753.html https://www.suse.com/security/cve/CVE-2020-27918.html https://www.suse.com/security/cve/CVE-2020-29623.html https://www.suse.com/security/cve/CVE-2020-3902.html https://www.suse.com/security/cve/CVE-2020-9802.html https://www.suse.com/security/cve/CVE-2020-9803.html https://www.suse.com/security/cve/CVE-2020-9805.html https://www.suse.com/security/cve/CVE-2020-9947.html https://www.suse.com/security/cve/CVE-2020-9948.html https://www.suse.com/security/cve/CVE-2020-9951.html https://www.suse.com/security/cve/CVE-2020-9952.html https://www.suse.com/security/cve/CVE-2021-1765.html https://www.suse.com/security/cve/CVE-2021-1788.html https://www.suse.com/security/cve/CVE-2021-1817.html https://www.suse.com/security/cve/CVE-2021-1820.html https://www.suse.com/security/cve/CVE-2021-1825.html https://www.suse.com/security/cve/CVE-2021-1826.html https://www.suse.com/security/cve/CVE-2021-1844.html https://www.suse.com/security/cve/CVE-2021-1871.html https://www.suse.com/security/cve/CVE-2021-30661.html https://www.suse.com/security/cve/CVE-2021-30666.html https://www.suse.com/security/cve/CVE-2021-30682.html https://www.suse.com/security/cve/CVE-2021-30761.html https://www.suse.com/security/cve/CVE-2021-30762.html https://www.suse.com/security/cve/CVE-2021-30809.html https://www.suse.com/security/cve/CVE-2021-30818.html https://www.suse.com/security/cve/CVE-2021-30823.html https://www.suse.com/security/cve/CVE-2021-30836.html https://www.suse.com/security/cve/CVE-2021-30846.html https://www.suse.com/security/cve/CVE-2021-30848.html https://www.suse.com/security/cve/CVE-2021-30849.html https://www.suse.com/security/cve/CVE-2021-30851.html https://www.suse.com/security/cve/CVE-2021-30858.html https://www.suse.com/security/cve/CVE-2021-30884.html https://www.suse.com/security/cve/CVE-2021-30887.html https://www.suse.com/security/cve/CVE-2021-30888.html https://www.suse.com/security/cve/CVE-2021-30889.html https://www.suse.com/security/cve/CVE-2021-30890.html https://www.suse.com/security/cve/CVE-2021-30897.html https://bugzilla.suse.com/1194019

1 0

openSUSE-SU-2022:0184-2: important: Security update for json-c
by opensuse-security＠opensuse.org 17 Feb '22

17 Feb '22

openSUSE Security Update: Security update for json-c ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0184-2 Rating: important References: #1171479 Cross-References: CVE-2020-12762 CVSS scores: CVE-2020-12762 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-12762 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for json-c fixes the following issues: - CVE-2020-12762: Fixed integer overflow and out-of-bounds write. (bsc#1171479) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-184=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): json-c-debugsource-0.13-3.3.1 libjson-c-devel-0.13-3.3.1 libjson-c3-0.13-3.3.1 libjson-c3-debuginfo-0.13-3.3.1 - openSUSE Leap 15.4 (x86_64): libjson-c3-32bit-0.13-3.3.1 libjson-c3-32bit-debuginfo-0.13-3.3.1 - openSUSE Leap 15.4 (noarch): libjson-c-doc-0.13-3.3.1 References: https://www.suse.com/security/cve/CVE-2020-12762.html https://bugzilla.suse.com/1171479

1 0

openSUSE-SU-2022:0038-1: important: Security update for kafka
by opensuse-security＠opensuse.org 16 Feb '22

16 Feb '22

openSUSE Security Update: Security update for kafka ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0038-1 Rating: important References: #1193662 #1194842 #1194843 #1194844 Cross-References: CVE-2021-4104 CVE-2022-23302 CVE-2022-23305 CVE-2022-23307 CVSS scores: CVE-2021-4104 (NVD) : 7.5 CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-4104 (SUSE): 6.4 CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H CVE-2022-23302 (NVD) : 8.8 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2022-23302 (SUSE): 6.6 CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H CVE-2022-23305 (NVD) : 9.8 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-23305 (SUSE): 8.1 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-23307 (SUSE): 8.1 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H Affected Products: openSUSE Backports SLE-15-SP3 ______________________________________________________________________________ An update that fixes four vulnerabilities is now available. Description: This update for kafka, kafka-kit fixes following issues: - Remove JDBCAppender, JMSSink, chainsaw from log4j jars during build to prevent bsc#1194842, CVE-2022-23302, bsc#1194843, CVE-2022-23305, bsc#1194844, CVE-2022-23307 - Rebuild with kafka-kit change to Remove JMSAppender from log4j jars during build to prevent bsc#1193662, CVE-2021-4104 Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15-SP3: zypper in -t patch openSUSE-2022-38=1 Package List: - openSUSE Backports SLE-15-SP3 (aarch64 i586 ppc64le s390x x86_64): kafka-source-2.1.0-bp153.2.6.1 - openSUSE Backports SLE-15-SP3 (x86_64): kafka-kit-2.1.0-bp153.2.6.1 References: https://www.suse.com/security/cve/CVE-2021-4104.html https://www.suse.com/security/cve/CVE-2022-23302.html https://www.suse.com/security/cve/CVE-2022-23305.html https://www.suse.com/security/cve/CVE-2022-23307.html https://bugzilla.suse.com/1193662 https://bugzilla.suse.com/1194842 https://bugzilla.suse.com/1194843 https://bugzilla.suse.com/1194844

1 0

openSUSE-SU-2022:0037-1: important: Security update for firejail
by opensuse-security＠opensuse.org 16 Feb '22

16 Feb '22

openSUSE Security Update: Security update for firejail ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0037-1 Rating: important References: #1195880 Affected Products: openSUSE Backports SLE-15-SP3 ______________________________________________________________________________ An update that contains security fixes can now be installed. Description: This update for firejail fixes the following issues: - Update Leap 15.3 package to 0.9.68 (boo#1195880) update to firejail 0.9.68: - security: on Ubuntu, the PPA is now recommended over the distro package - (see README.md) (#4748) - security: bugfix: private-cwd leaks access to the entire filesystem - (#4780); reported by Hugo Osvaldo Barrera - feature: remove (some) environment variables with auth-tokens (#4157) - feature: ALLOW_TRAY condition (#4510 #4599) - feature: add basic Firejail support to AppArmor base abstraction (#3226 - #4628) - feature: intrusion detection system (--ids-init, --ids-check) - feature: deterministic shutdown command (--deterministic-exit-code, - --deterministic-shutdown) (#928 #3042 #4635) - feature: noprinters command (#4607 #4827) - feature: network monitor (--nettrace) - feature: network locker (--netlock) (#4848) - feature: whitelist-ro profile command (#4740) - feature: disable pipewire with --nosound (#4855) - feature: Unset TMP if it doesn't exist inside of sandbox (#4151) - feature: Allow apostrophe in whitelist and blacklist (#4614) - feature: AppImage support in --build command (#4878) - modifs: exit code: distinguish fatal signals by adding 128 (#4533) - modifs: firecfg.config is now installed to /etc/firejail/ (#408 #4669) - modifs: close file descriptors greater than 2 (--keep-fd) (#4845) - modifs: nogroups now stopped causing certain system groups to be dropped, - which are now controlled by the relevant "no" options instead (such as - nosound -> drop audio group), which fixes device access issues on systems - not using (e)logind (such as with seatd) (#4632 #4725 #4732 #4851) - removal: --disable-whitelist at compile time - removal: whitelist=yes/no in /etc/firejail/firejail.config - bugfix: Fix sndio support (#4362 #4365) - bugfix: Error mounting tmpfs (MS_REMOUNT flag not being cleared) (#4387) - bugfix: --build clears the environment (#4460 #4467) - bugfix: firejail hangs with net parameter (#3958 #4476) - bugfix: Firejail does not work with a custom hosts file (#2758 #4560) - bugfix: --tracelog and --trace override /etc/ld.so.preload (#4558 #4586) - bugfix: PATH_MAX is undeclared on musl libc (#4578 #4579 #4583 #4606) - bugfix: firejail symlinks are not skipped with private-bin + globs (#4626) - bugfix: Firejail rejects empty arguments (#4395) - bugfix: firecfg does not work with symlinks (discord.desktop) (#4235) - bugfix: Seccomp list output goes to stdout instead of stderr (#4328) - bugfix: private-etc does not work with symlinks (#4887) - bugfix: Hardware key not detected on keepassxc (#4883) - build: allow building with address sanitizer (#4594) - build: Stop linking pthread (#4695) - build: Configure cleanup and improvements (#4712) - ci: add profile checks for sorting disable-programs.inc and - firecfg.config and for the required arguments in private-etc (#2739 #4643) - ci: pin GitHub actions to SHAs and use Dependabot to update them (#4774) - docs: Add new command checklist to CONTRIBUTING.md (#4413) - docs: Rework bug report issue template and add both a question and a - feature request template (#4479 #4515 #4561) - docs: fix contradictory descriptions of machine-id ("preserves" vs - "spoofs") (#4689) - docs: Document that private-bin and private-etc always accumulate (#4078) - new includes: whitelist-run-common.inc (#4288), disable-X11.inc (#4462) - new includes: disable-proc.inc (#4521) - removed includes: disable-passwordmgr.inc (#4454 #4461) - new profiles: microsoft-edge-beta, clion-eap, lifeograph, zim - new profiles: io.github.lainsce.Notejot, rednotebook, gallery-dl - new profiles: yt-dlp, goldendict, goldendict, bundle, cmake - new profiles: make, meson, pip, codium, telnet, ftp, OpenStego - new profiles: imv, retroarch, torbrowser, CachyBrowser, - new profiles: notable, RPCS3, wget2, raincat, conitop, 1passwd, - new profiles: Seafile, neovim, com.github.tchx84.Flatseal firejail 0.9.66: * deprecated --audit options, relpaced by jailcheck utility * deprecated follow-symlink-as-user from firejail.config * new firejail.config settings: private-bin, private-etc * new firejail.config settings: private-opt, private-srv * new firejail.config settings: whitelist-disable-topdir * new firejail.config settings: seccomp-filter-add * removed kcmp syscall from seccomp default filter * rename --noautopulse to keep-config-pulse * filtering environment variables * zsh completion * command line: --mkdir, --mkfile * --protocol now accumulates * jailtest utility for testing running sandboxes * faccessat2 syscall support * --private-dev keeps /dev/input * added --noinput to disable /dev/input * add support for subdirs in --private-etc * subdirs support in private-etc * input devices support in private-dev, --no-input * support trailing comments on profile lines * many new profiles - split shell completion into standard subpackages Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15-SP3: zypper in -t patch openSUSE-2022-37=1 Package List: - openSUSE Backports SLE-15-SP3 (aarch64 i586 ppc64le s390x x86_64): firejail-0.9.68-bp153.2.3.1 References: https://bugzilla.suse.com/1195880

1 0

openSUSE-SU-2022:0036-1: moderate: Security update for zabbix
by opensuse-security＠opensuse.org 16 Feb '22

16 Feb '22

openSUSE Security Update: Security update for zabbix ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0036-1 Rating: moderate References: #1144018 #1174253 #1181400 #1183014 #1194681 Cross-References: CVE-2020-15803 CVE-2021-27927 CVE-2022-23134 CVSS scores: CVE-2020-15803 (NVD) : 6.1 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N CVE-2020-15803 (SUSE): 6.3 CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:L/I:H/A:N CVE-2022-23134 (NVD) : 5.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N CVE-2022-23134 (SUSE): 3.7 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that solves three vulnerabilities and has two fixes is now available. Description: This update for zabbix fixes the following issues: - Updated to latest realease 4.0.37. Security issues fixed: - CVE-2022-23134: Fixed possible view of the setup pages by unauthenticated users if config file already exists (boo#1194681). - CVE-2021-27927: Fixed CSRF protection mechanism inside CControllerAuthenticationUpdate controller (boo#1183014). - CVE-2020-15803: Fixed stored XSS in the URL Widget (boo#1174253). Bugfixes: - boo#1181400: Added hardening to systemd service(s) - boo#1144018: Restructured for easier maintenance because FATE#324346 Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-2022-36=1 Package List: - openSUSE Leap 15.3 (aarch64 i586 ppc64le s390x x86_64): zabbix-agent-4.0.37-lp153.2.3.1 zabbix-agent-debuginfo-4.0.37-lp153.2.3.1 zabbix-debuginfo-4.0.37-lp153.2.3.1 zabbix-debugsource-4.0.37-lp153.2.3.1 zabbix-java-gateway-4.0.37-lp153.2.3.1 zabbix-phpfrontend-4.0.37-lp153.2.3.1 zabbix-proxy-4.0.37-lp153.2.3.1 zabbix-proxy-mysql-4.0.37-lp153.2.3.1 zabbix-proxy-mysql-debuginfo-4.0.37-lp153.2.3.1 zabbix-proxy-postgresql-4.0.37-lp153.2.3.1 zabbix-proxy-postgresql-debuginfo-4.0.37-lp153.2.3.1 zabbix-proxy-sqlite-4.0.37-lp153.2.3.1 zabbix-proxy-sqlite-debuginfo-4.0.37-lp153.2.3.1 zabbix-server-4.0.37-lp153.2.3.1 zabbix-server-debuginfo-4.0.37-lp153.2.3.1 zabbix-server-mysql-4.0.37-lp153.2.3.1 zabbix-server-mysql-debuginfo-4.0.37-lp153.2.3.1 zabbix-server-postgresql-4.0.37-lp153.2.3.1 zabbix-server-postgresql-debuginfo-4.0.37-lp153.2.3.1 References: https://www.suse.com/security/cve/CVE-2020-15803.html https://www.suse.com/security/cve/CVE-2021-27927.html https://www.suse.com/security/cve/CVE-2022-23134.html https://bugzilla.suse.com/1144018 https://bugzilla.suse.com/1174253 https://bugzilla.suse.com/1181400 https://bugzilla.suse.com/1183014 https://bugzilla.suse.com/1194681

1 0

openSUSE-SU-2022:0088-2: moderate: Security update for ghostscript
by opensuse-security＠opensuse.org 14 Feb '22

14 Feb '22

openSUSE Security Update: Security update for ghostscript ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0088-2 Rating: moderate References: #1194303 #1194304 Cross-References: CVE-2021-45944 CVE-2021-45949 CVSS scores: CVE-2021-45944 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2021-45944 (SUSE): 6.2 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-45949 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2021-45949 (SUSE): 6.2 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for ghostscript fixes the following issues: - CVE-2021-45944: Fixed use-after-free in sampled_data_sample (bsc#1194303) - CVE-2021-45949: Fixed heap-based buffer overflow in sampled_data_finish (bsc#1194304) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-88=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): ghostscript-9.52-161.1 ghostscript-debuginfo-9.52-161.1 ghostscript-debugsource-9.52-161.1 ghostscript-devel-9.52-161.1 ghostscript-x11-9.52-161.1 ghostscript-x11-debuginfo-9.52-161.1 References: https://www.suse.com/security/cve/CVE-2021-45944.html https://www.suse.com/security/cve/CVE-2021-45949.html https://bugzilla.suse.com/1194303 https://bugzilla.suse.com/1194304

1 0

openSUSE-SU-2022:0104-2: important: Security update for SDL2
by opensuse-security＠opensuse.org 14 Feb '22

14 Feb '22

openSUSE Security Update: Security update for SDL2 ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0104-2 Rating: important References: #1181201 #1181202 Cross-References: CVE-2020-14409 CVE-2020-14410 CVSS scores: CVE-2020-14409 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2020-14409 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2020-14410 (NVD) : 5.4 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L CVE-2020-14410 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for SDL2 fixes the following issues: - CVE-2020-14409: Fixed Integer Overflow resulting in heap corruption in SDL_BlitCopy in video/SDL_blit_copy.c via a crafted .BMP (bsc#1181202). - CVE-2020-14410: Fixed heap-based buffer over-read in Blit_3or4_to_3or4__inversed_rgb in video/SDL_blit_N.c via a crafted .BMP (bsc#1181201). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-104=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): SDL2-debugsource-2.0.8-11.3.1 libSDL2-2_0-0-2.0.8-11.3.1 libSDL2-2_0-0-debuginfo-2.0.8-11.3.1 libSDL2-devel-2.0.8-11.3.1 - openSUSE Leap 15.4 (x86_64): libSDL2-2_0-0-32bit-2.0.8-11.3.1 libSDL2-2_0-0-32bit-debuginfo-2.0.8-11.3.1 libSDL2-devel-32bit-2.0.8-11.3.1 References: https://www.suse.com/security/cve/CVE-2020-14409.html https://www.suse.com/security/cve/CVE-2020-14410.html https://bugzilla.suse.com/1181201 https://bugzilla.suse.com/1181202

1 0

openSUSE-SU-2022:0375-1: moderate: Security update for wireshark
by opensuse-security＠opensuse.org 14 Feb '22

14 Feb '22

openSUSE Security Update: Security update for wireshark ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0375-1 Rating: moderate References: #1194166 #1194167 #1194168 #1194169 #1194170 #1194171 #1194780 SLE-18727 Cross-References: CVE-2021-4181 CVE-2021-4182 CVE-2021-4183 CVE-2021-4184 CVE-2021-4185 CVE-2021-4190 CVSS scores: CVE-2021-4181 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-4181 (SUSE): 4.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L CVE-2021-4182 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-4182 (SUSE): 4.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L CVE-2021-4183 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2021-4183 (SUSE): 3.3 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L CVE-2021-4184 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-4184 (SUSE): 4.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L CVE-2021-4185 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-4185 (SUSE): 4.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L CVE-2021-4190 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-4190 (SUSE): 4.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that solves 6 vulnerabilities, contains one feature and has one errata is now available. Description: This update for wireshark fixes the following issues: Update to version 3.6.1: - CVE-2021-4185: RTMPT dissector infinite loop (bsc#1194166) - CVE-2021-4184: BitTorrent DHT dissector infinite loop (bsc#1194167) - CVE-2021-4183: pcapng file parser crash (bsc#1194168) - CVE-2021-4182: RFC 7468 file parser infinite loop (bsc#1194169) - CVE-2021-4181: Sysdig Event dissector crash (bsc#1194170) - CVE-2021-4190: Kafka dissector infinite loop (bsc#1194171) - Support for Shared Memory Communications (SMC) (jsc#SLE-18727) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-375=1 Package List: - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): libvirt-7.1.0-150300.6.23.1 libvirt-admin-7.1.0-150300.6.23.1 libvirt-admin-debuginfo-7.1.0-150300.6.23.1 libvirt-client-7.1.0-150300.6.23.1 libvirt-client-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-7.1.0-150300.6.23.1 libvirt-daemon-config-network-7.1.0-150300.6.23.1 libvirt-daemon-config-nwfilter-7.1.0-150300.6.23.1 libvirt-daemon-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-interface-7.1.0-150300.6.23.1 libvirt-daemon-driver-interface-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-lxc-7.1.0-150300.6.23.1 libvirt-daemon-driver-lxc-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-network-7.1.0-150300.6.23.1 libvirt-daemon-driver-network-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-nodedev-7.1.0-150300.6.23.1 libvirt-daemon-driver-nodedev-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-nwfilter-7.1.0-150300.6.23.1 libvirt-daemon-driver-nwfilter-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-qemu-7.1.0-150300.6.23.1 libvirt-daemon-driver-qemu-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-secret-7.1.0-150300.6.23.1 libvirt-daemon-driver-secret-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-core-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-core-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-disk-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-disk-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-gluster-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-gluster-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-iscsi-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-iscsi-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-iscsi-direct-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-iscsi-direct-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-logical-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-logical-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-mpath-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-mpath-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-scsi-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-scsi-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-hooks-7.1.0-150300.6.23.1 libvirt-daemon-lxc-7.1.0-150300.6.23.1 libvirt-daemon-qemu-7.1.0-150300.6.23.1 libvirt-debugsource-7.1.0-150300.6.23.1 libvirt-devel-7.1.0-150300.6.23.1 libvirt-libs-7.1.0-150300.6.23.1 libvirt-libs-debuginfo-7.1.0-150300.6.23.1 libvirt-lock-sanlock-7.1.0-150300.6.23.1 libvirt-lock-sanlock-debuginfo-7.1.0-150300.6.23.1 libvirt-nss-7.1.0-150300.6.23.1 libvirt-nss-debuginfo-7.1.0-150300.6.23.1 libwireshark15-3.6.1-3.68.1 libwireshark15-debuginfo-3.6.1-3.68.1 libwiretap12-3.6.1-3.68.1 libwiretap12-debuginfo-3.6.1-3.68.1 libwsutil13-3.6.1-3.68.1 libwsutil13-debuginfo-3.6.1-3.68.1 wireshark-3.6.1-3.68.1 wireshark-debuginfo-3.6.1-3.68.1 wireshark-debugsource-3.6.1-3.68.1 wireshark-devel-3.6.1-3.68.1 wireshark-plugin-libvirt-7.1.0-150300.6.23.1 wireshark-plugin-libvirt-debuginfo-7.1.0-150300.6.23.1 wireshark-ui-qt-3.6.1-3.68.1 wireshark-ui-qt-debuginfo-3.6.1-3.68.1 - openSUSE Leap 15.3 (aarch64 x86_64): libvirt-daemon-driver-storage-rbd-7.1.0-150300.6.23.1 libvirt-daemon-driver-storage-rbd-debuginfo-7.1.0-150300.6.23.1 - openSUSE Leap 15.3 (x86_64): libvirt-client-32bit-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-driver-libxl-7.1.0-150300.6.23.1 libvirt-daemon-driver-libxl-debuginfo-7.1.0-150300.6.23.1 libvirt-daemon-xen-7.1.0-150300.6.23.1 libvirt-devel-32bit-7.1.0-150300.6.23.1 - openSUSE Leap 15.3 (noarch): libvirt-bash-completion-7.1.0-150300.6.23.1 libvirt-doc-7.1.0-150300.6.23.1 References: https://www.suse.com/security/cve/CVE-2021-4181.html https://www.suse.com/security/cve/CVE-2021-4182.html https://www.suse.com/security/cve/CVE-2021-4183.html https://www.suse.com/security/cve/CVE-2021-4184.html https://www.suse.com/security/cve/CVE-2021-4185.html https://www.suse.com/security/cve/CVE-2021-4190.html https://bugzilla.suse.com/1194166 https://bugzilla.suse.com/1194167 https://bugzilla.suse.com/1194168 https://bugzilla.suse.com/1194169 https://bugzilla.suse.com/1194170 https://bugzilla.suse.com/1194171 https://bugzilla.suse.com/1194780

1 0

openSUSE-SU-2022:0141-2: moderate: Security update for permissions
by opensuse-security＠opensuse.org 14 Feb '22

14 Feb '22

openSUSE Security Update: Security update for permissions ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0141-2 Rating: moderate References: #1169614 Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that contains security fixes can now be installed. Description: This update for permissions fixes the following issues: - Update to version 20181225: setuid bit for cockpit session binary (bsc#1169614). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-141=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): permissions-20181225-23.12.1 permissions-debuginfo-20181225-23.12.1 permissions-debugsource-20181225-23.12.1 - openSUSE Leap 15.4 (noarch): permissions-zypp-plugin-20181225-23.12.1 References: https://bugzilla.suse.com/1169614

1 0

openSUSE-SU-2022:0062-2: important: Security update for openexr
by opensuse-security＠opensuse.org 14 Feb '22

14 Feb '22

openSUSE Security Update: Security update for openexr ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0062-2 Rating: important References: #1194333 Cross-References: CVE-2021-45942 CVSS scores: CVE-2021-45942 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2021-45942 (SUSE): 6.6 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:H Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for openexr fixes the following issues: - CVE-2021-45942: Fixed heap-based buffer overflow in Imf_3_1:LineCompositeTask:execute. (bsc#1194333) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-62=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): libIlmImf-2_2-23-2.2.1-3.41.1 libIlmImf-2_2-23-debuginfo-2.2.1-3.41.1 libIlmImfUtil-2_2-23-2.2.1-3.41.1 libIlmImfUtil-2_2-23-debuginfo-2.2.1-3.41.1 openexr-2.2.1-3.41.1 openexr-debuginfo-2.2.1-3.41.1 openexr-debugsource-2.2.1-3.41.1 openexr-devel-2.2.1-3.41.1 openexr-doc-2.2.1-3.41.1 - openSUSE Leap 15.4 (x86_64): libIlmImf-2_2-23-32bit-2.2.1-3.41.1 libIlmImf-2_2-23-32bit-debuginfo-2.2.1-3.41.1 libIlmImfUtil-2_2-23-32bit-2.2.1-3.41.1 libIlmImfUtil-2_2-23-32bit-debuginfo-2.2.1-3.41.1 References: https://www.suse.com/security/cve/CVE-2021-45942.html https://bugzilla.suse.com/1194333

1 0

openSUSE-SU-2022:0370-1: critical: Security update for the Linux Kernel
by opensuse-security＠opensuse.org 11 Feb '22

11 Feb '22

openSUSE Security Update: Security update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0370-1 Rating: critical References: #1154353 #1154488 #1156395 #1160634 #1176447 #1177599 #1183405 #1185377 #1187428 #1187723 #1188605 #1191881 #1193096 #1193506 #1193767 #1193802 #1193861 #1193864 #1193867 #1194048 #1194227 #1194291 #1194880 #1195009 #1195062 #1195065 #1195073 #1195183 #1195184 #1195254 #1195267 #1195293 #1195371 #1195476 #1195477 #1195478 #1195479 #1195480 #1195481 #1195482 Cross-References: CVE-2020-28097 CVE-2021-22600 CVE-2021-39648 CVE-2021-39657 CVE-2021-39685 CVE-2021-44733 CVE-2021-45095 CVE-2022-0286 CVE-2022-0330 CVE-2022-0435 CVE-2022-22942 CVSS scores: CVE-2020-28097 (NVD) : 5.9 CVSS:3.1/AV:P/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H CVE-2020-28097 (SUSE): 6.2 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-22600 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-22600 (SUSE): 8.4 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2021-39648 (SUSE): 4.4 CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N CVE-2021-39657 (SUSE): 3.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L CVE-2021-39685 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-44733 (SUSE): 4.2 CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L CVE-2021-45095 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N CVE-2021-45095 (SUSE): 4.3 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N CVE-2022-0286 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2022-0286 (SUSE): 5.1 CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2022-0435 (SUSE): 8.1 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-22942 (SUSE): 7 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that solves 11 vulnerabilities and has 29 fixes is now available. Description: The SUSE Linux Enterprise 15 SP3 kernel was updated to receive various security and bugfixes. The following security bugs were fixed: - CVE-2022-0435: Fixed remote stack overflow in net/tipc module that validate domain record count on input (bsc#1195254). - CVE-2022-0330: Fixed flush TLBs before releasing backing store (bsc#1194880). - CVE-2022-0286: Fixed null pointer dereference in bond_ipsec_add_sa() that may have lead to local denial of service (bnc#1195371). - CVE-2022-22942: Fixed stale file descriptors on failed usercopy (bsc#1195065). - CVE-2021-45095: Fixed refcount leak in pep_sock_accept in net/phonet/pep.c (bnc#1193867). - CVE-2021-44733: Fixed a use-after-free exists in drivers/tee/tee_shm.c in the TEE subsystem, that could have occured because of a race condition in tee_shm_get_from_id during an attempt to free a shared memory object (bnc#1193767). - CVE-2021-39685: Fixed USB gadget buffer overflow caused by too large endpoint 0 requests (bsc#1193802). - CVE-2021-39657: Fixed out of bounds read due to a missing bounds check in ufshcd_eh_device_reset_handler of ufshcd.c. This could lead to local information disclosure with System execution privileges needed (bnc#1193864). - CVE-2021-39648: Fixed possible disclosure of kernel heap memory due to a race condition in gadget_dev_desc_UDC_show of configfs.c. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation (bnc#1193861). - CVE-2021-22600: Fixed double free bug in packet_set_ring() in net/packet/af_packet.c that could have been exploited by a local user through crafted syscalls to escalate privileges or deny service (bnc#1195184). - CVE-2020-28097: Fixed out-of-bounds read in vgacon subsystem that mishandled software scrollback (bnc#1187723). The following non-security bugs were fixed: - ACPI: battery: Add the ThinkPad "Not Charging" quirk (git-fixes). - ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R() (git-fixes). - ACPICA: Fix wrong interpretation of PCC address (git-fixes). - ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5 (git-fixes). - ACPICA: Utilities: Avoid deleting the same object twice in a row (git-fixes). - ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions (git-fixes). - ALSA: seq: Set upper limit of processed events (git-fixes). - ALSA: usb-audio: Correct quirk for VF0770 (git-fixes). - ALSA: usb-audio: initialize variables that could ignore errors (git-fixes). - ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name (git-fixes). - ASoC: fsl: Add missing error handling in pcm030_fabric_probe (git-fixes). - ASoC: max9759: fix underflow in speaker_gain_control_put() (git-fixes). - ASoC: mediatek: mt8173: fix device_node leak (git-fixes). - ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes (git-fixes). - Bluetooth: Fix debugfs entry leak in hci_register_dev() (git-fixes). - Bluetooth: refactor malicious adv data check (git-fixes). - Documentation: fix firewire.rst ABI file path error (git-fixes). - HID: apple: Do not reset quirks when the Fn key is not found (git-fixes). - HID: quirks: Allow inverting the absolute X/Y values (git-fixes). - HID: uhid: Fix worker destroying device without any protection (git-fixes). - HID: wacom: Reset expected and received contact counts at the same time (git-fixes). - IB/cm: Avoid a loop when device has 255 ports (git-fixes) - IB/hfi1: Fix error return code in parse_platform_config() (git-fixes) - IB/hfi1: Use kzalloc() for mmu_rb_handler allocation (git-fixes) - IB/isert: Fix a use after free in isert_connect_request (git-fixes) - IB/mlx4: Separate tunnel and wire bufs parameters (git-fixes) - IB/mlx5: Add missing error code (git-fixes) - IB/mlx5: Add mutex destroy call to cap_mask_mutex mutex (git-fixes) - IB/mlx5: Fix error unwinding when set_has_smi_cap fails (git-fixes) - IB/mlx5: Return appropriate error code instead of ENOMEM (git-fixes) - IB/umad: Return EIO in case of when device disassociated (git-fixes) - IB/umad: Return EPOLLERR in case of when device disassociated (git-fixes) - Input: wm97xx: Simplify resource management (git-fixes). - NFS: Ensure the server had an up to date ctime before renaming (git-fixes). - NFSv4: Handle case where the lookup of a directory fails (git-fixes). - NFSv4: nfs_atomic_open() can race when looking up a non-regular file (git-fixes). - PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller (git-fixes). - PM: wakeup: simplify the output logic of pm_show_wakelocks() (git-fixes). - RDMA/addr: Be strict with gid size (git-fixes) - RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res (git-fixes) - RDMA/bnxt_re: Fix error return code in bnxt_qplib_cq_process_terminal() (git-fixes) - RDMA/bnxt_re: Set queue pair state when being queried (git-fixes) - RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait (git-fixes) - RDMA/core: Clean up cq pool mechanism (jsc#SLE-15176). - RDMA/core: Do not access cm_id after its destruction (git-fixes) - RDMA/core: Do not indicate device ready when device enablement fails (git-fixes) - RDMA/core: Fix corrupted SL on passive side (git-fixes) - RDMA/core: Unify RoCE check and re-factor code (git-fixes) - RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server (git-fixes) - RDMA/cxgb4: Fix the reported max_recv_sge value (git-fixes) - RDMA/cxgb4: Validate the number of CQEs (git-fixes) - RDMA/cxgb4: add missing qpid increment (git-fixes) - RDMA/hns: Add a check for current state before modifying QP (git-fixes) - RDMA/hns: Remove the portn field in UD SQ WQE (git-fixes) - RDMA/hns: Remove unnecessary access right set during INIT2INIT (git-fixes) - RDMA/i40iw: Address an mmap handler exploit in i40iw (git-fixes) - RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails (git-fixes) - RDMA/mlx5: Fix corruption of reg_pages in mlx5_ib_rereg_user_mr() (git-fixes) - RDMA/mlx5: Fix potential race between destroy and CQE poll (git-fixes) - RDMA/mlx5: Fix query DCT via DEVX (git-fixes) - RDMA/mlx5: Fix type warning of sizeof in __mlx5_ib_alloc_counters() (git-fixes) - RDMA/mlx5: Fix wrong free of blue flame register on error (git-fixes) - RDMA/mlx5: Issue FW command to destroy SRQ on reentry (git-fixes) - RDMA/mlx5: Recover from fatal event in dual port mode (git-fixes) - RDMA/mlx5: Use the correct obj_id upon DEVX TIR creation (git-fixes) - RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd() (git-fixes) - RDMA/rxe: Clear all QP fields if creation failed (git-fixes) - RDMA/rxe: Compute PSN windows correctly (git-fixes) - RDMA/rxe: Correct skb on loopback path (git-fixes) - RDMA/rxe: Fix coding error in rxe_rcv_mcast_pkt (git-fixes) - RDMA/rxe: Fix coding error in rxe_recv.c (git-fixes) - RDMA/rxe: Fix missing kconfig dependency on CRYPTO (git-fixes) - RDMA/rxe: Remove the unnecessary variable (jsc#SLE-15176). - RDMA/rxe: Remove useless code in rxe_recv.c (git-fixes) - RDMA/siw: Fix a use after free in siw_alloc_mr (git-fixes) - RDMA/siw: Fix calculation of tx_valid_cpus size (git-fixes) - RDMA/siw: Fix handling of zero-sized Read and Receive Queues. (git-fixes) - RDMA/siw: Properly check send and receive CQ pointers (git-fixes) - RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp (git-fixes) - RDMA/uverbs: Fix a NULL vs IS_ERR() bug (git-fixes) - RDMA/uverbs: Tidy input validation of ib_uverbs_rereg_mr() (git-fixes) - RMDA/sw: Do not allow drivers using dma_virt_ops on highmem configs (git-fixes) - USB: core: Fix hang in usb_kill_urb by adding memory barriers (git-fixes). - USB: serial: mos7840: fix probe error handling (git-fixes). - ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply (git-fixes). - arm64: Kconfig: add a choice for endianness (jsc#SLE-23432). - asix: fix wrong return value in asix_check_host_enable() (git-fixes). - ata: pata_platform: Fix a NULL pointer dereference in __pata_platform_probe() (git-fixes). - ath10k: Fix tx hanging (git-fixes). - ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream (git-fixes). - batman-adv: allow netlink usage in unprivileged containers (git-fixes). - blk-cgroup: fix missing put device in error path from blkg_conf_pref() (bsc#1195481). - blk-mq: introduce blk_mq_set_request_complete (git-fixes). - bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds() (bsc#1194227). - btrfs: tree-checker: Add EXTENT_ITEM and METADATA_ITEM check (bsc#1195009). - btrfs: tree-checker: annotate all error branches as unlikely (bsc#1195009). - btrfs: tree-checker: check for BTRFS_BLOCK_FLAG_FULL_BACKREF being set improperly (bsc#1195009). - cgroup/cpuset: Fix a partition bug with hotplug (bsc#1194291). - clk: si5341: Fix clock HW provider cleanup (git-fixes). - crypto: qat - fix undetected PFVF timeout in ACK loop (git-fixes). - dma-buf: heaps: Fix potential spectre v1 gadget (git-fixes). - drm/amdgpu: fixup bad vram size on gmc v8 (git-fixes). - drm/bridge: megachips: Ensure both bridges are probed before registration (git-fixes). - drm/etnaviv: limit submit sizes (git-fixes). - drm/etnaviv: relax submit size limits (git-fixes). - drm/i915/overlay: Prevent divide by zero bugs in scaling (git-fixes). - drm/lima: fix warning when CONFIG_DEBUG_SG=y & CONFIG_DMA_API_DEBUG=y (git-fixes). - drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc (git-fixes). - drm/msm/dsi: Fix missing put_device() call in dsi_get_phy (git-fixes). - drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable (git-fixes). - drm/msm/hdmi: Fix missing put_device() call in msm_hdmi_get_phy (git-fixes). - drm/msm: Fix wrong size calculation (git-fixes). - drm/nouveau/kms/nv04: use vzalloc for nv04_display (git-fixes). - drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR (git-fixes). - drm/nouveau: fix off by one in BIOS boundary checking (git-fixes). - drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Book X91F/L (git-fixes). - ext4: fix an use-after-free issue about data=journal writeback mode (bsc#1195482). - ext4: make sure quota gets properly shutdown on error (bsc#1195480). - ext4: set csum seed in tmp inode while migrating to extents (bsc#1195267). - floppy: Add max size check for user space request (git-fixes). - fsnotify: fix fsnotify hooks in pseudo filesystems (bsc#1195479). - fsnotify: invalidate dcache before IN_DELETE event (bsc#1195478). - gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlock (git-fixes). - gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use (git-fixes). - hv_netvsc: Set needed_headroom according to VF (bsc#1193506). - hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681 (git-fixes). - hwmon: (lm90) Mark alert as broken for MAX6646/6647/6649 (git-fixes). - hwmon: (lm90) Mark alert as broken for MAX6654 (git-fixes). - hwmon: (lm90) Mark alert as broken for MAX6680 (git-fixes). - hwmon: (lm90) Reduce maximum conversion rate for G781 (git-fixes). - i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters (git-fixes). - i2c: i801: Do not silently correct invalid transfer size (git-fixes). - i2c: mpc: Correct I2C reset procedure (git-fixes). - i40iw: Add support to make destroy QP synchronous (git-fixes) - ibmvnic: Allow extra failures before disabling (bsc#1195073 ltc#195713). - ibmvnic: Update driver return codes (bsc#1195293 ltc#196198). - ibmvnic: do not spin in tasklet (bsc#1195073 ltc#195713). - ibmvnic: init ->running_cap_crqs early (bsc#1195073 ltc#195713). - ibmvnic: remove unused ->wait_capability (bsc#1195073 ltc#195713). - ibmvnic: remove unused defines (bsc#1195293 ltc#196198). - igc: Fix TX timestamp support for non-MSI-X platforms (bsc#1160634). - iwlwifi: fix leaks/bad data after failed firmware load (git-fixes). - iwlwifi: mvm: Fix calculation of frame length (git-fixes). - iwlwifi: mvm: Increase the scan timeout guard to 30 seconds (git-fixes). - iwlwifi: mvm: synchronize with FW after multicast commands (git-fixes). - iwlwifi: remove module loading failure message (git-fixes). - lib82596: Fix IRQ check in sni_82596_probe (git-fixes). - lightnvm: Remove lightnvm implemenation (bsc#1191881). - mac80211: allow non-standard VHT MCS-10/11 (git-fixes). - media: b2c2: Add missing check in flexcop_pci_isr: (git-fixes). - media: coda/imx-vdoa: Handle dma_set_coherent_mask error codes (git-fixes). - media: igorplugusb: receiver overflow should be reported (git-fixes). - media: m920x: do not use stack on USB reads (git-fixes). - media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach() (git-fixes). - media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach() (git-fixes). - media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds (git-fixes). - mlxsw: Only advertise link modes supported by both driver and device (bsc#1154488). - mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO (git-fixes). - mtd: nand: bbt: Fix corner case in bad block table handling (git-fixes). - mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings (git-fixes). - mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6 (git-fixes). - net, xdp: Introduce xdp_init_buff utility routine (bsc#1193506). - net, xdp: Introduce xdp_prepare_buff utility routine (bsc#1193506). - net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering (jsc#SLE-8464). - net/mlx5: E-Switch, fix changing vf VLANID (jsc#SLE-15172). - net/mlx5e: Protect encap route dev from concurrent release (jsc#SLE-8464). - net: allow retransmitting a TCP packet if original is still in queue (bsc#1188605 bsc#1187428). - net: bonding: fix bond_xmit_broadcast return value error bug (bsc#1176447). - net: bridge: vlan: fix memory leak in __allowed_ingress (bsc#1176447). - net: bridge: vlan: fix single net device option dumping (bsc#1176447). - net: mana: Add RX fencing (bsc#1193506). - net: mana: Add XDP support (bsc#1193506). - net: sch_generic: aviod concurrent reset and enqueue op for lockless qdisc (bsc#1183405). - net: sched: add barrier to ensure correct ordering for lockless qdisc (bsc#1183405). - net: sched: avoid unnecessary seqcount operation for lockless qdisc (bsc#1183405). - net: sched: fix packet stuck problem for lockless qdisc (bsc#1183405). - net: sched: fix tx action reschedule issue with stopped queue (bsc#1183405). - net: sched: fix tx action rescheduling issue during deactivation (bsc#1183405). - net: sched: replaced invalid qdisc tree flush helper in qdisc_replace (bsc#1183405). - net: sfp: fix high power modules without diagnostic monitoring (bsc#1154353). - netdevsim: set .owner to THIS_MODULE (bsc#1154353). - nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind() (git-fixes). - nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head (git-fixes). - nvme-fabrics: avoid double completions in nvmf_fail_nonready_command (git-fixes). - nvme-fabrics: ignore invalid fast_io_fail_tmo values (git-fixes). - nvme-fabrics: remove superfluous nvmf_host_put in nvmf_parse_options (git-fixes). - nvme-tcp: fix data digest pointer calculation (git-fixes). - nvme-tcp: fix incorrect h2cdata pdu offset accounting (git-fixes). - nvme-tcp: fix memory leak when freeing a queue (git-fixes). - nvme-tcp: fix possible use-after-completion (git-fixes). - nvme-tcp: validate R2T PDU in nvme_tcp_handle_r2t() (git-fixes). - nvme: add 'iopolicy' module parameter (bsc#1177599 bsc#1193096). - nvme: fix use after free when disconnecting a reconnecting ctrl (git-fixes). - nvme: introduce a nvme_host_path_error helper (git-fixes). - nvme: refactor ns->ctrl by request (git-fixes). - phy: uniphier-usb3ss: fix unintended writing zeros to PHY register (git-fixes). - phylib: fix potential use-after-free (git-fixes). - pinctrl: bcm2835: Add support for wake-up interrupts (git-fixes). - pinctrl: bcm2835: Match BCM7211 compatible string (git-fixes). - pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line (git-fixes). - pinctrl: intel: fix unexpected interrupt (git-fixes). - powerpc/book3s64/radix: make tlb_single_page_flush_ceiling a debugfs entry (bsc#1195183 ltc#193865). - powerpc/perf: Fix power_pmu_disable to call clear_pmi_irq_pending only if PMI is pending (bsc#1156395). - regulator: qcom_smd: Align probe function with rpmh-regulator (git-fixes). - rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev (git-fixes). - rpmsg: char: Fix race between the release of rpmsg_eptdev and cdev (git-fixes). - rsi: Fix use-after-free in rsi_rx_done_handler() (git-fixes). - sched/fair: Fix detection of per-CPU kthreads waking a task (git fixes (sched/fair)). - sched/numa: Fix is_core_idle() (git fixes (sched/numa)). - scripts/dtc: dtx_diff: remove broken example from help text (git-fixes). - scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting (git-fixes). - serial: 8250: of: Fix mapped region size when using reg-offset property (git-fixes). - serial: Fix incorrect rs485 polarity on uart open (git-fixes). - serial: amba-pl011: do not request memory region twice (git-fixes). - serial: core: Keep mctrl register state and cached copy in sync (git-fixes). - serial: pl010: Drop CR register reset on set_termios (git-fixes). - serial: stm32: fix software flow control transfer (git-fixes). - spi: bcm-qspi: check for valid cs before applying chip select (git-fixes). - spi: mediatek: Avoid NULL pointer crash in interrupt (git-fixes). - spi: meson-spicc: add IRQ check in meson_spicc_probe (git-fixes). - supported.conf: mark rtw88 modules as supported (jsc#SLE-22690) - tty: Add support for Brainboxes UC cards (git-fixes). - tty: n_gsm: fix SW flow control encoding/handling (git-fixes). - ucsi_ccg: Check DEV_INT bit only when starting CCG4 (git-fixes). - udf: Fix NULL ptr deref when converting from inline format (bsc#1195476). - udf: Restore i_lenAlloc when inode expansion fails (bsc#1195477). - usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge (git-fixes). - usb: common: ulpi: Fix crash in ulpi_match() (git-fixes). - usb: gadget: f_fs: Use stream_open() for endpoint files (git-fixes). - usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS (git-fixes). - usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0 (git-fixes). - usb: roles: fix include/linux/usb/role.h compile issue (git-fixes). - usb: typec: tcpm: Do not disconnect while receiving VBUS off (git-fixes). - usb: uhci: add aspeed ast2600 uhci support (git-fixes). - vfio/iommu_type1: replace kfree with kvfree (git-fixes). - video: hyperv_fb: Fix validation of screen resolution (git-fixes). - vxlan: fix error return code in __vxlan_dev_create() (bsc#1154353). - workqueue: Fix unbind_workers() VS wq_worker_running() race (bsc#1195062). - x86/gpu: Reserve stolen memory for first integrated Intel GPU (git-fixes). - xfrm: fix MTU regression (bsc#1185377, bsc#1194048). - xhci-pci: Allow host runtime PM as default for Intel Alpine Ridge LP (git-fixes). Special Instructions and Notes: Please reboot the system after installing this update. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-370=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-370=1 Package List: - openSUSE Leap 15.4 (aarch64 x86_64): cluster-md-kmp-preempt-5.3.18-150300.59.49.1 cluster-md-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 dlm-kmp-preempt-5.3.18-150300.59.49.1 dlm-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 gfs2-kmp-preempt-5.3.18-150300.59.49.1 gfs2-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 kernel-preempt-5.3.18-150300.59.49.1 kernel-preempt-debuginfo-5.3.18-150300.59.49.1 kernel-preempt-debugsource-5.3.18-150300.59.49.1 kernel-preempt-devel-5.3.18-150300.59.49.1 kernel-preempt-devel-debuginfo-5.3.18-150300.59.49.1 kernel-preempt-extra-5.3.18-150300.59.49.1 kernel-preempt-extra-debuginfo-5.3.18-150300.59.49.1 kernel-preempt-livepatch-devel-5.3.18-150300.59.49.1 kernel-preempt-optional-5.3.18-150300.59.49.1 kernel-preempt-optional-debuginfo-5.3.18-150300.59.49.1 kselftests-kmp-preempt-5.3.18-150300.59.49.1 kselftests-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 ocfs2-kmp-preempt-5.3.18-150300.59.49.1 ocfs2-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 reiserfs-kmp-preempt-5.3.18-150300.59.49.1 reiserfs-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 - openSUSE Leap 15.4 (aarch64): dtb-al-5.3.18-150300.59.49.1 dtb-zte-5.3.18-150300.59.49.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): cluster-md-kmp-default-5.3.18-150300.59.49.1 cluster-md-kmp-default-debuginfo-5.3.18-150300.59.49.1 dlm-kmp-default-5.3.18-150300.59.49.1 dlm-kmp-default-debuginfo-5.3.18-150300.59.49.1 gfs2-kmp-default-5.3.18-150300.59.49.1 gfs2-kmp-default-debuginfo-5.3.18-150300.59.49.1 kernel-default-5.3.18-150300.59.49.1 kernel-default-base-5.3.18-150300.59.49.1.150300.18.31.1 kernel-default-base-rebuild-5.3.18-150300.59.49.1.150300.18.31.1 kernel-default-debuginfo-5.3.18-150300.59.49.1 kernel-default-debugsource-5.3.18-150300.59.49.1 kernel-default-devel-5.3.18-150300.59.49.1 kernel-default-devel-debuginfo-5.3.18-150300.59.49.1 kernel-default-extra-5.3.18-150300.59.49.1 kernel-default-extra-debuginfo-5.3.18-150300.59.49.1 kernel-default-livepatch-5.3.18-150300.59.49.1 kernel-default-livepatch-devel-5.3.18-150300.59.49.1 kernel-default-optional-5.3.18-150300.59.49.1 kernel-default-optional-debuginfo-5.3.18-150300.59.49.1 kernel-obs-build-5.3.18-150300.59.49.1 kernel-obs-build-debugsource-5.3.18-150300.59.49.1 kernel-obs-qa-5.3.18-150300.59.49.1 kernel-syms-5.3.18-150300.59.49.1 kselftests-kmp-default-5.3.18-150300.59.49.1 kselftests-kmp-default-debuginfo-5.3.18-150300.59.49.1 ocfs2-kmp-default-5.3.18-150300.59.49.1 ocfs2-kmp-default-debuginfo-5.3.18-150300.59.49.1 reiserfs-kmp-default-5.3.18-150300.59.49.1 reiserfs-kmp-default-debuginfo-5.3.18-150300.59.49.1 - openSUSE Leap 15.3 (aarch64 x86_64): cluster-md-kmp-preempt-5.3.18-150300.59.49.1 cluster-md-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 dlm-kmp-preempt-5.3.18-150300.59.49.1 dlm-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 gfs2-kmp-preempt-5.3.18-150300.59.49.1 gfs2-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 kernel-preempt-5.3.18-150300.59.49.1 kernel-preempt-debuginfo-5.3.18-150300.59.49.1 kernel-preempt-debugsource-5.3.18-150300.59.49.1 kernel-preempt-devel-5.3.18-150300.59.49.1 kernel-preempt-devel-debuginfo-5.3.18-150300.59.49.1 kernel-preempt-extra-5.3.18-150300.59.49.1 kernel-preempt-extra-debuginfo-5.3.18-150300.59.49.1 kernel-preempt-livepatch-devel-5.3.18-150300.59.49.1 kernel-preempt-optional-5.3.18-150300.59.49.1 kernel-preempt-optional-debuginfo-5.3.18-150300.59.49.1 kselftests-kmp-preempt-5.3.18-150300.59.49.1 kselftests-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 ocfs2-kmp-preempt-5.3.18-150300.59.49.1 ocfs2-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 reiserfs-kmp-preempt-5.3.18-150300.59.49.1 reiserfs-kmp-preempt-debuginfo-5.3.18-150300.59.49.1 - openSUSE Leap 15.3 (ppc64le x86_64): kernel-debug-5.3.18-150300.59.49.1 kernel-debug-debuginfo-5.3.18-150300.59.49.1 kernel-debug-debugsource-5.3.18-150300.59.49.1 kernel-debug-devel-5.3.18-150300.59.49.1 kernel-debug-devel-debuginfo-5.3.18-150300.59.49.1 kernel-debug-livepatch-devel-5.3.18-150300.59.49.1 kernel-kvmsmall-5.3.18-150300.59.49.1 kernel-kvmsmall-debuginfo-5.3.18-150300.59.49.1 kernel-kvmsmall-debugsource-5.3.18-150300.59.49.1 kernel-kvmsmall-devel-5.3.18-150300.59.49.1 kernel-kvmsmall-devel-debuginfo-5.3.18-150300.59.49.1 kernel-kvmsmall-livepatch-devel-5.3.18-150300.59.49.1 - openSUSE Leap 15.3 (aarch64): cluster-md-kmp-64kb-5.3.18-150300.59.49.1 cluster-md-kmp-64kb-debuginfo-5.3.18-150300.59.49.1 dlm-kmp-64kb-5.3.18-150300.59.49.1 dlm-kmp-64kb-debuginfo-5.3.18-150300.59.49.1 dtb-al-5.3.18-150300.59.49.1 dtb-allwinner-5.3.18-150300.59.49.1 dtb-altera-5.3.18-150300.59.49.1 dtb-amd-5.3.18-150300.59.49.1 dtb-amlogic-5.3.18-150300.59.49.1 dtb-apm-5.3.18-150300.59.49.1 dtb-arm-5.3.18-150300.59.49.1 dtb-broadcom-5.3.18-150300.59.49.1 dtb-cavium-5.3.18-150300.59.49.1 dtb-exynos-5.3.18-150300.59.49.1 dtb-freescale-5.3.18-150300.59.49.1 dtb-hisilicon-5.3.18-150300.59.49.1 dtb-lg-5.3.18-150300.59.49.1 dtb-marvell-5.3.18-150300.59.49.1 dtb-mediatek-5.3.18-150300.59.49.1 dtb-nvidia-5.3.18-150300.59.49.1 dtb-qcom-5.3.18-150300.59.49.1 dtb-renesas-5.3.18-150300.59.49.1 dtb-rockchip-5.3.18-150300.59.49.1 dtb-socionext-5.3.18-150300.59.49.1 dtb-sprd-5.3.18-150300.59.49.1 dtb-xilinx-5.3.18-150300.59.49.1 dtb-zte-5.3.18-150300.59.49.1 gfs2-kmp-64kb-5.3.18-150300.59.49.1 gfs2-kmp-64kb-debuginfo-5.3.18-150300.59.49.1 kernel-64kb-5.3.18-150300.59.49.1 kernel-64kb-debuginfo-5.3.18-150300.59.49.1 kernel-64kb-debugsource-5.3.18-150300.59.49.1 kernel-64kb-devel-5.3.18-150300.59.49.1 kernel-64kb-devel-debuginfo-5.3.18-150300.59.49.1 kernel-64kb-extra-5.3.18-150300.59.49.1 kernel-64kb-extra-debuginfo-5.3.18-150300.59.49.1 kernel-64kb-livepatch-devel-5.3.18-150300.59.49.1 kernel-64kb-optional-5.3.18-150300.59.49.1 kernel-64kb-optional-debuginfo-5.3.18-150300.59.49.1 kselftests-kmp-64kb-5.3.18-150300.59.49.1 kselftests-kmp-64kb-debuginfo-5.3.18-150300.59.49.1 ocfs2-kmp-64kb-5.3.18-150300.59.49.1 ocfs2-kmp-64kb-debuginfo-5.3.18-150300.59.49.1 reiserfs-kmp-64kb-5.3.18-150300.59.49.1 reiserfs-kmp-64kb-debuginfo-5.3.18-150300.59.49.1 - openSUSE Leap 15.3 (noarch): kernel-devel-5.3.18-150300.59.49.1 kernel-docs-5.3.18-150300.59.49.1 kernel-docs-html-5.3.18-150300.59.49.1 kernel-macros-5.3.18-150300.59.49.1 kernel-source-5.3.18-150300.59.49.1 kernel-source-vanilla-5.3.18-150300.59.49.1 - openSUSE Leap 15.3 (s390x): kernel-zfcpdump-5.3.18-150300.59.49.1 kernel-zfcpdump-debuginfo-5.3.18-150300.59.49.1 kernel-zfcpdump-debugsource-5.3.18-150300.59.49.1 References: https://www.suse.com/security/cve/CVE-2020-28097.html https://www.suse.com/security/cve/CVE-2021-22600.html https://www.suse.com/security/cve/CVE-2021-39648.html https://www.suse.com/security/cve/CVE-2021-39657.html https://www.suse.com/security/cve/CVE-2021-39685.html https://www.suse.com/security/cve/CVE-2021-44733.html https://www.suse.com/security/cve/CVE-2021-45095.html https://www.suse.com/security/cve/CVE-2022-0286.html https://www.suse.com/security/cve/CVE-2022-0330.html https://www.suse.com/security/cve/CVE-2022-0435.html https://www.suse.com/security/cve/CVE-2022-22942.html https://bugzilla.suse.com/1154353 https://bugzilla.suse.com/1154488 https://bugzilla.suse.com/1156395 https://bugzilla.suse.com/1160634 https://bugzilla.suse.com/1176447 https://bugzilla.suse.com/1177599 https://bugzilla.suse.com/1183405 https://bugzilla.suse.com/1185377 https://bugzilla.suse.com/1187428 https://bugzilla.suse.com/1187723 https://bugzilla.suse.com/1188605 https://bugzilla.suse.com/1191881 https://bugzilla.suse.com/1193096 https://bugzilla.suse.com/1193506 https://bugzilla.suse.com/1193767 https://bugzilla.suse.com/1193802 https://bugzilla.suse.com/1193861 https://bugzilla.suse.com/1193864 https://bugzilla.suse.com/1193867 https://bugzilla.suse.com/1194048 https://bugzilla.suse.com/1194227 https://bugzilla.suse.com/1194291 https://bugzilla.suse.com/1194880 https://bugzilla.suse.com/1195009 https://bugzilla.suse.com/1195062 https://bugzilla.suse.com/1195065 https://bugzilla.suse.com/1195073 https://bugzilla.suse.com/1195183 https://bugzilla.suse.com/1195184 https://bugzilla.suse.com/1195254 https://bugzilla.suse.com/1195267 https://bugzilla.suse.com/1195293 https://bugzilla.suse.com/1195371 https://bugzilla.suse.com/1195476 https://bugzilla.suse.com/1195477 https://bugzilla.suse.com/1195478 https://bugzilla.suse.com/1195479 https://bugzilla.suse.com/1195480 https://bugzilla.suse.com/1195481 https://bugzilla.suse.com/1195482

1 0

openSUSE-SU-2022:0363-1: critical: Security update for the Linux Kernel
by opensuse-security＠opensuse.org 10 Feb '22

10 Feb '22

openSUSE Security Update: Security update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0363-1 Rating: critical References: #1154353 #1154488 #1160634 #1176447 #1177599 #1183405 #1185377 #1187428 #1187723 #1188605 #1191881 #1193096 #1193506 #1193767 #1193802 #1193861 #1193864 #1193867 #1194048 #1194227 #1194291 #1194880 #1195009 #1195062 #1195065 #1195073 #1195183 #1195184 #1195254 #1195267 #1195293 #1195371 Cross-References: CVE-2020-28097 CVE-2021-22600 CVE-2021-39648 CVE-2021-39657 CVE-2021-39685 CVE-2021-4159 CVE-2021-44733 CVE-2021-45095 CVE-2022-0286 CVE-2022-0330 CVE-2022-0435 CVE-2022-22942 CVSS scores: CVE-2020-28097 (NVD) : 5.9 CVSS:3.1/AV:P/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H CVE-2020-28097 (SUSE): 6.2 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-22600 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-22600 (SUSE): 8.4 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2021-39648 (SUSE): 4.4 CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N CVE-2021-39657 (SUSE): 3.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L CVE-2021-39685 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-4159 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N CVE-2021-44733 (SUSE): 4.2 CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L CVE-2021-45095 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N CVE-2021-45095 (SUSE): 4.3 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N CVE-2022-0286 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2022-0286 (SUSE): 5.1 CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2022-0435 (SUSE): 8.1 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-22942 (SUSE): 7 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that solves 12 vulnerabilities and has 20 fixes is now available. Description: The SUSE Linux Enterprise 15 SP3 Azure kernel was updated to receive various security and bugfixes. The following security bugs were fixed: - CVE-2022-0435: Fixed remote stack overflow in net/tipc module that validate domain record count on input (bsc#1195254). - CVE-2022-0330: Fixed flush TLBs before releasing backing store (bsc#1194880). - CVE-2022-0286: Fixed null pointer dereference in bond_ipsec_add_sa() that may have lead to local denial of service (bnc#1195371). - CVE-2022-22942: Fixed stale file descriptors on failed usercopy (bsc#1195065). - CVE-2021-45095: Fixed refcount leak in pep_sock_accept in net/phonet/pep.c (bnc#1193867). - CVE-2021-44733: Fixed a use-after-free exists in drivers/tee/tee_shm.c in the TEE subsystem, that could have occured because of a race condition in tee_shm_get_from_id during an attempt to free a shared memory object (bnc#1193767). - CVE-2021-39657: Fixed out of bounds read due to a missing bounds check in ufshcd_eh_device_reset_handler of ufshcd.c. This could lead to local information disclosure with System execution privileges needed (bnc#1193864). - CVE-2021-39648: Fixed possible disclosure of kernel heap memory due to a race condition in gadget_dev_desc_UDC_show of configfs.c. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation (bnc#1193861). - CVE-2021-22600: Fixed double free bug in packet_set_ring() in net/packet/af_packet.c that could have been exploited by a local user through crafted syscalls to escalate privileges or deny service (bnc#1195184). - CVE-2020-28097: Fixed out-of-bounds read in vgacon subsystem that mishandled software scrollback (bnc#1187723). - CVE-2021-4159: Fixed kernel ptr leak vulnerability via BPF in coerce_reg_to_size (bsc#1194227). The following security references were added to already fixed issues: - CVE-2021-39685: Fixed USB gadget buffer overflow caused by too large endpoint 0 requests (bsc#1193802). The following non-security bugs were fixed: - ACPI: battery: Add the ThinkPad "Not Charging" quirk (git-fixes). - ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R() (git-fixes). - ACPICA: Fix wrong interpretation of PCC address (git-fixes). - ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5 (git-fixes). - ACPICA: Utilities: Avoid deleting the same object twice in a row (git-fixes). - ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions (git-fixes). - ALSA: seq: Set upper limit of processed events (git-fixes). - ASoC: mediatek: mt8173: fix device_node leak (git-fixes). - Bluetooth: Fix debugfs entry leak in hci_register_dev() (git-fixes). - Documentation: fix firewire.rst ABI file path error (git-fixes). - HID: apple: Do not reset quirks when the Fn key is not found (git-fixes). - HID: quirks: Allow inverting the absolute X/Y values (git-fixes). - HID: uhid: Fix worker destroying device without any protection (git-fixes). - HID: wacom: Reset expected and received contact counts at the same time (git-fixes). - PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller (git-fixes). - RDMA/core: Clean up cq pool mechanism (jsc#SLE-15176). - RDMA/rxe: Remove the unnecessary variable (jsc#SLE-15176). - ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply (git-fixes). - arm64: Kconfig: add a choice for endianness (jsc#SLE-23432). - asix: fix wrong return value in asix_check_host_enable() (git-fixes). - ata: pata_platform: Fix a NULL pointer dereference in __pata_platform_probe() (git-fixes). - ath10k: Fix tx hanging (git-fixes). - ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream (git-fixes). - batman-adv: allow netlink usage in unprivileged containers (git-fixes). - btrfs: tree-checker: Add EXTENT_ITEM and METADATA_ITEM check (bsc#1195009). - btrfs: tree-checker: annotate all error branches as unlikely (bsc#1195009). - btrfs: tree-checker: check for BTRFS_BLOCK_FLAG_FULL_BACKREF being set improperly (bsc#1195009). - cgroup/cpuset: Fix a partition bug with hotplug (bsc#1194291). - clk: si5341: Fix clock HW provider cleanup (git-fixes). - crypto: qat - fix undetected PFVF timeout in ACK loop (git-fixes). - drm/amdgpu: fixup bad vram size on gmc v8 (git-fixes). - drm/bridge: megachips: Ensure both bridges are probed before registration (git-fixes). - drm/etnaviv: limit submit sizes (git-fixes). - drm/etnaviv: relax submit size limits (git-fixes). - drm/lima: fix warning when CONFIG_DEBUG_SG=y & CONFIG_DMA_API_DEBUG=y (git-fixes). - drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc (git-fixes). - drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable (git-fixes). - drm/msm/hdmi: Fix missing put_device() call in msm_hdmi_get_phy (git-fixes). - drm/msm: Fix wrong size calculation (git-fixes). - drm/nouveau/kms/nv04: use vzalloc for nv04_display (git-fixes). - drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR (git-fixes). - drm/radeon: fix error handling in radeon_driver_open_kms (git-fixes). - drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Book X91F/L (git-fixes). - ext4: set csum seed in tmp inode while migrating to extents (bsc#1195267). - floppy: Add max size check for user space request (git-fixes). - gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlock (git-fixes). - gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use (git-fixes). - hv_netvsc: Set needed_headroom according to VF (bsc#1193506). - hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681 (git-fixes). - hwmon: (lm90) Mark alert as broken for MAX6646/6647/6649 (git-fixes). - hwmon: (lm90) Mark alert as broken for MAX6654 (git-fixes). - hwmon: (lm90) Mark alert as broken for MAX6680 (git-fixes). - hwmon: (lm90) Reduce maximum conversion rate for G781 (git-fixes). - i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters (git-fixes). - i2c: i801: Do not silently correct invalid transfer size (git-fixes). - i2c: mpc: Correct I2C reset procedure (git-fixes). - ibmvnic: Allow extra failures before disabling (bsc#1195073 ltc#195713). - ibmvnic: Update driver return codes (bsc#1195293 ltc#196198). - ibmvnic: do not spin in tasklet (bsc#1195073 ltc#195713). - ibmvnic: init ->running_cap_crqs early (bsc#1195073 ltc#195713). - ibmvnic: remove unused ->wait_capability (bsc#1195073 ltc#195713). - ibmvnic: remove unused defines (bsc#1195293 ltc#196198). - igc: Fix TX timestamp support for non-MSI-X platforms (bsc#1160634). - iwlwifi: fix leaks/bad data after failed firmware load (git-fixes). - iwlwifi: mvm: Fix calculation of frame length (git-fixes). - iwlwifi: mvm: Increase the scan timeout guard to 30 seconds (git-fixes). - iwlwifi: mvm: synchronize with FW after multicast commands (git-fixes). - iwlwifi: remove module loading failure message (git-fixes). - lib82596: Fix IRQ check in sni_82596_probe (git-fixes). - lightnvm: Remove lightnvm implemenation (bsc#1191881). - mac80211: allow non-standard VHT MCS-10/11 (git-fixes). - media: b2c2: Add missing check in flexcop_pci_isr: (git-fixes). - media: coda/imx-vdoa: Handle dma_set_coherent_mask error codes (git-fixes). - media: igorplugusb: receiver overflow should be reported (git-fixes). - media: m920x: do not use stack on USB reads (git-fixes). - media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach() (git-fixes). - media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach() (git-fixes). - media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds (git-fixes). - mlxsw: Only advertise link modes supported by both driver and device (bsc#1154488). - mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO (git-fixes). - mtd: nand: bbt: Fix corner case in bad block table handling (git-fixes). - mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings (git-fixes). - mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6 (git-fixes). - net, xdp: Introduce xdp_init_buff utility routine (bsc#1193506). - net, xdp: Introduce xdp_prepare_buff utility routine (bsc#1193506). - net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering (jsc#SLE-8464). - net/mlx5: E-Switch, fix changing vf VLANID (jsc#SLE-15172). - net/mlx5e: Protect encap route dev from concurrent release (jsc#SLE-8464). - net: allow retransmitting a TCP packet if original is still in queue (bsc#1188605 bsc#1187428). - net: bonding: fix bond_xmit_broadcast return value error bug (bsc#1176447). - net: bridge: vlan: fix memory leak in __allowed_ingress (bsc#1176447). - net: bridge: vlan: fix single net device option dumping (bsc#1176447). - net: mana: Add RX fencing (bsc#1193506). - net: mana: Add XDP support (bsc#1193506). - net: sch_generic: aviod concurrent reset and enqueue op for lockless qdisc (bsc#1183405). - net: sched: add barrier to ensure correct ordering for lockless qdisc (bsc#1183405). - net: sched: avoid unnecessary seqcount operation for lockless qdisc (bsc#1183405). - net: sched: fix packet stuck problem for lockless qdisc (bsc#1183405). - net: sched: fix tx action reschedule issue with stopped queue (bsc#1183405). - net: sched: fix tx action rescheduling issue during deactivation (bsc#1183405). - net: sched: replaced invalid qdisc tree flush helper in qdisc_replace (bsc#1183405). - net: sfp: fix high power modules without diagnostic monitoring (bsc#1154353). - netdevsim: set .owner to THIS_MODULE (bsc#1154353). - nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind() (git-fixes). - nvme: add 'iopolicy' module parameter (bsc#1177599 bsc#1193096). - phy: uniphier-usb3ss: fix unintended writing zeros to PHY register (git-fixes). - phylib: fix potential use-after-free (git-fixes). - pinctrl: bcm2835: Add support for wake-up interrupts (git-fixes). - pinctrl: bcm2835: Match BCM7211 compatible string (git-fixes). - powerpc/book3s64/radix: make tlb_single_page_flush_ceiling a debugfs entry (bsc#1195183 ltc#193865). - regulator: qcom_smd: Align probe function with rpmh-regulator (git-fixes). - rsi: Fix use-after-free in rsi_rx_done_handler() (git-fixes). - sched/fair: Fix detection of per-CPU kthreads waking a task (git fixes (sched/fair)). - sched/numa: Fix is_core_idle() (git fixes (sched/numa)). - scripts/dtc: dtx_diff: remove broken example from help text (git-fixes). - serial: 8250: of: Fix mapped region size when using reg-offset property (git-fixes). - serial: Fix incorrect rs485 polarity on uart open (git-fixes). - serial: amba-pl011: do not request memory region twice (git-fixes). - serial: core: Keep mctrl register state and cached copy in sync (git-fixes). - serial: pl010: Drop CR register reset on set_termios (git-fixes). - serial: stm32: fix software flow control transfer (git-fixes). - supported.conf: mark rtw88 modules as supported (jsc#SLE-22690) - tty: n_gsm: fix SW flow control encoding/handling (git-fixes). - ucsi_ccg: Check DEV_INT bit only when starting CCG4 (git-fixes). - usb: common: ulpi: Fix crash in ulpi_match() (git-fixes). - usb: gadget: f_fs: Use stream_open() for endpoint files (git-fixes). - usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS (git-fixes). - usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0 (git-fixes). - usb: roles: fix include/linux/usb/role.h compile issue (git-fixes). - usb: typec: tcpm: Do not disconnect while receiving VBUS off (git-fixes). - usb: uhci: add aspeed ast2600 uhci support (git-fixes). - vfio/iommu_type1: replace kfree with kvfree (git-fixes). - video: hyperv_fb: Fix validation of screen resolution (git-fixes). - vxlan: fix error return code in __vxlan_dev_create() (bsc#1154353). - workqueue: Fix unbind_workers() VS wq_worker_running() race (bsc#1195062). - x86/gpu: Reserve stolen memory for first integrated Intel GPU (git-fixes). - xfrm: fix MTU regression (bsc#1185377, bsc#1194048). Special Instructions and Notes: Please reboot the system after installing this update. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-363=1 Package List: - openSUSE Leap 15.3 (noarch): kernel-devel-azure-5.3.18-150300.38.40.4 kernel-source-azure-5.3.18-150300.38.40.4 - openSUSE Leap 15.3 (x86_64): cluster-md-kmp-azure-5.3.18-150300.38.40.4 cluster-md-kmp-azure-debuginfo-5.3.18-150300.38.40.4 dlm-kmp-azure-5.3.18-150300.38.40.4 dlm-kmp-azure-debuginfo-5.3.18-150300.38.40.4 gfs2-kmp-azure-5.3.18-150300.38.40.4 gfs2-kmp-azure-debuginfo-5.3.18-150300.38.40.4 kernel-azure-5.3.18-150300.38.40.4 kernel-azure-debuginfo-5.3.18-150300.38.40.4 kernel-azure-debugsource-5.3.18-150300.38.40.4 kernel-azure-devel-5.3.18-150300.38.40.4 kernel-azure-devel-debuginfo-5.3.18-150300.38.40.4 kernel-azure-extra-5.3.18-150300.38.40.4 kernel-azure-extra-debuginfo-5.3.18-150300.38.40.4 kernel-azure-livepatch-devel-5.3.18-150300.38.40.4 kernel-azure-optional-5.3.18-150300.38.40.4 kernel-azure-optional-debuginfo-5.3.18-150300.38.40.4 kernel-syms-azure-5.3.18-150300.38.40.1 kselftests-kmp-azure-5.3.18-150300.38.40.4 kselftests-kmp-azure-debuginfo-5.3.18-150300.38.40.4 ocfs2-kmp-azure-5.3.18-150300.38.40.4 ocfs2-kmp-azure-debuginfo-5.3.18-150300.38.40.4 reiserfs-kmp-azure-5.3.18-150300.38.40.4 reiserfs-kmp-azure-debuginfo-5.3.18-150300.38.40.4 References: https://www.suse.com/security/cve/CVE-2020-28097.html https://www.suse.com/security/cve/CVE-2021-22600.html https://www.suse.com/security/cve/CVE-2021-39648.html https://www.suse.com/security/cve/CVE-2021-39657.html https://www.suse.com/security/cve/CVE-2021-39685.html https://www.suse.com/security/cve/CVE-2021-4159.html https://www.suse.com/security/cve/CVE-2021-44733.html https://www.suse.com/security/cve/CVE-2021-45095.html https://www.suse.com/security/cve/CVE-2022-0286.html https://www.suse.com/security/cve/CVE-2022-0330.html https://www.suse.com/security/cve/CVE-2022-0435.html https://www.suse.com/security/cve/CVE-2022-22942.html https://bugzilla.suse.com/1154353 https://bugzilla.suse.com/1154488 https://bugzilla.suse.com/1160634 https://bugzilla.suse.com/1176447 https://bugzilla.suse.com/1177599 https://bugzilla.suse.com/1183405 https://bugzilla.suse.com/1185377 https://bugzilla.suse.com/1187428 https://bugzilla.suse.com/1187723 https://bugzilla.suse.com/1188605 https://bugzilla.suse.com/1191881 https://bugzilla.suse.com/1193096 https://bugzilla.suse.com/1193506 https://bugzilla.suse.com/1193767 https://bugzilla.suse.com/1193802 https://bugzilla.suse.com/1193861 https://bugzilla.suse.com/1193864 https://bugzilla.suse.com/1193867 https://bugzilla.suse.com/1194048 https://bugzilla.suse.com/1194227 https://bugzilla.suse.com/1194291 https://bugzilla.suse.com/1194880 https://bugzilla.suse.com/1195009 https://bugzilla.suse.com/1195062 https://bugzilla.suse.com/1195065 https://bugzilla.suse.com/1195073 https://bugzilla.suse.com/1195183 https://bugzilla.suse.com/1195184 https://bugzilla.suse.com/1195254 https://bugzilla.suse.com/1195267 https://bugzilla.suse.com/1195293 https://bugzilla.suse.com/1195371

1 0

openSUSE-SU-2022:0366-1: critical: Security update for the Linux Kernel
by opensuse-security＠opensuse.org 10 Feb '22

10 Feb '22

openSUSE Security Update: Security update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0366-1 Rating: critical References: #1071995 #1124431 #1167162 #1169514 #1172073 #1179599 #1184804 #1185377 #1186207 #1186222 #1187167 #1189305 #1189841 #1190358 #1190428 #1191229 #1191241 #1191384 #1191731 #1192032 #1192267 #1192740 #1192845 #1192847 #1192877 #1192946 #1193306 #1193440 #1193442 #1193575 #1193669 #1193727 #1193731 #1193767 #1193861 #1193864 #1193867 #1193927 #1194001 #1194048 #1194087 #1194227 #1194302 #1194516 #1194529 #1194880 #1194888 #1194985 #1195166 #1195254 Cross-References: CVE-2018-25020 CVE-2019-15126 CVE-2020-27820 CVE-2021-0920 CVE-2021-0935 CVE-2021-28711 CVE-2021-28712 CVE-2021-28713 CVE-2021-28714 CVE-2021-28715 CVE-2021-33098 CVE-2021-3564 CVE-2021-39648 CVE-2021-39657 CVE-2021-4002 CVE-2021-4083 CVE-2021-4135 CVE-2021-4149 CVE-2021-4197 CVE-2021-4202 CVE-2021-43975 CVE-2021-43976 CVE-2021-44733 CVE-2021-45095 CVE-2021-45486 CVE-2022-0322 CVE-2022-0330 CVSS scores: CVE-2018-25020 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2019-15126 (NVD) : 3.1 CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N CVE-2019-15126 (SUSE): 3.1 CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N CVE-2020-27820 (SUSE): 3.1 CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:N/I:L/A:L CVE-2021-0920 (NVD) : 6.4 CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H CVE-2021-0920 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-0935 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-28711 (NVD) : 6.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H CVE-2021-28711 (SUSE): 6.2 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-28712 (NVD) : 6.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H CVE-2021-28712 (SUSE): 6.2 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-28713 (NVD) : 6.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H CVE-2021-28713 (SUSE): 6.2 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-28714 (NVD) : 6.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H CVE-2021-28714 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-28715 (NVD) : 6.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H CVE-2021-28715 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-33098 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-33098 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-3564 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-3564 (SUSE): 4.7 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-39648 (SUSE): 4.4 CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N CVE-2021-39657 (SUSE): 3.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L CVE-2021-4002 (SUSE): 5.1 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N CVE-2021-4083 (SUSE): 7.4 CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2021-4135 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N CVE-2021-4149 (SUSE): 4.7 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-4197 (SUSE): 6.3 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N CVE-2021-4202 (SUSE): 7 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-43975 (SUSE): 6.7 CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H CVE-2021-43976 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-44733 (SUSE): 4.2 CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L CVE-2021-45095 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N CVE-2021-45095 (SUSE): 4.3 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N CVE-2021-45486 (NVD) : 3.5 CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N CVE-2021-45486 (SUSE): 3.7 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N CVE-2022-0322 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that solves 27 vulnerabilities and has 23 fixes is now available. Description: The SUSE Linux Enterprise 15 SP1 LTSS kernel was updated to receive various security and bugfixes. The following security bugs were fixed: - CVE-2022-0435: Fixed remote stack overflow in net/tipc module that validate domain record count on input (bsc#1195254). - CVE-2022-0330: Fixed flush TLBs before releasing backing store (bsc#1194880). - CVE-2021-45486: Fixed an information leak because the hash table is very small in net/ipv4/route.c (bnc#1194087). - CVE-2021-45095: Fixed refcount leak in pep_sock_accept in net/phonet/pep.c (bnc#1193867). - CVE-2021-44733: Fixed a use-after-free exists in drivers/tee/tee_shm.c in the TEE subsystem, that could have occured because of a race condition in tee_shm_get_from_id during an attempt to free a shared memory object (bnc#1193767). - CVE-2021-43976: Fixed a flaw that could allow an attacker (who can connect a crafted USB device) to cause a denial of service. (bnc#1192847) - CVE-2021-43975: Fixed a flaw in hw_atl_utils_fw_rpc_wait that could allow an attacker (who can introduce a crafted device) to trigger an out-of-bounds write via a crafted length value. (bsc#1192845) - CVE-2021-4202: Fixed NFC race condition by adding NCI_UNREG flag (bsc#1194529). - CVE-2021-4197: Use cgroup open-time credentials for process migraton perm checks (bsc#1194302). - CVE-2021-4159: Fixed kernel ptr leak vulnerability via BPF in coerce_reg_to_size (bsc#1194227). - CVE-2021-4149: Fixed btrfs unlock newly allocated extent buffer after error (bsc#1194001). - CVE-2021-4135: Fixed zero-initialize memory inside netdevsim for new map's value in function nsim_bpf_map_alloc (bsc#1193927). - CVE-2021-4083: Fixed a read-after-free memory flaw inside the garbage collection for Unix domain socket file handlers when users call close() and fget() simultaneouslyand can potentially trigger a race condition (bnc#1193727). - CVE-2021-4002: Fixed incorrect TLBs flush in hugetlbfs after huge_pmd_unshare (bsc#1192946). - CVE-2021-39657: Fixed out of bounds read due to a missing bounds check in ufshcd_eh_device_reset_handler of ufshcd.c. This could lead to local information disclosure with System execution privileges needed (bnc#1193864). - CVE-2021-39648: Fixed possible disclosure of kernel heap memory due to a race condition in gadget_dev_desc_UDC_show of configfs.c. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation (bnc#1193861). - CVE-2021-3564: Fixed double-free memory corruption in the Linux kernel HCI device initialization subsystem that could have been used by attaching malicious HCI TTY Bluetooth devices. A local user could use this flaw to crash the system (bnc#1186207). - CVE-2021-33098: Fixed a potential denial of service in Intel(R) Ethernet ixgbe driver due to improper input validation. (bsc#1192877) - CVE-2021-28715: Fixed issue with xen/netback to do not queue unlimited number of packages (XSA-392) (bsc#1193442). - CVE-2021-28714: Fixed issue with xen/netback to handle rx queue stall detection (XSA-392) (bsc#1193442). - CVE-2021-28713: Fixed issue with xen/console to harden hvc_xen against event channel storms (XSA-391) (bsc#1193440). - CVE-2021-28712: Fixed issue with xen/netfront to harden netfront against event channel storms (XSA-391) (bsc#1193440). - CVE-2021-28711: Fixed issue with xen/blkfront to harden blkfront against event channel storms (XSA-391) (bsc#1193440). - CVE-2021-0935: Fixed possible out of bounds write in ip6_xmit of ip6_output.c due to a use after free. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation (bnc#1192032). - CVE-2021-0920: Fixed a local privilege escalation due to an use after free bug in unix_gc (bsc#1193731). - CVE-2020-27820: Fixed a vulnerability where a use-after-frees in nouveau's postclose() handler could happen if removing device (bsc#1179599). - CVE-2019-15126: Fixed a vulnerability in Broadcom and Cypress Wi-Fi chips, used in RPi family of devices aka "Kr00k". (bsc#1167162) - CVE-2018-25020: Fixed an overflow in the BPF subsystem due to a mishandling of a long jump over an instruction sequence where inner instructions require substantial expansions into multiple BPF instructions. This affects kernel/bpf/core.c and net/core/filter.c (bnc#1193575). The following non-security bugs were fixed: - Bluetooth: fix the erroneous flush_work() order (git-fixes). - Build: Add obsolete_rebuilds_subpackage (boo#1172073 bsc#1191731). - ICMPv6: Add ICMPv6 Parameter Problem, code 3 definition (bsc#1191241 bsc#1195166). - IPv6: reply ICMP error if the first fragment do not include all headers (bsc#1191241). - elfcore: fix building with clang (bsc#1169514). - hv_netvsc: Set needed_headroom according to VF (bsc#1193506). - ipv6/netfilter: Discard first fragment not including all headers (bsc#1191241 bsc#1195166). - kernel-*-subpackage: Add dependency on kernel scriptlets (bsc#1192740). - kernel-binary.spec.in Stop templating the scriptlets for subpackages (bsc#1190358). - kernel-binary.spec.in: add zstd to BuildRequires if used - kernel-binary.spec.in: make sure zstd is supported by kmod if used - kernel-binary.spec: Check for no kernel signing certificates. Also remove unused variable. - kernel-binary.spec: Define $image as rpm macro (bsc#1189841). - kernel-binary.spec: Do not fail silently when KMP is empty (bsc#1190358). Copy the code from kernel-module-subpackage that deals with empty KMPs. - kernel-binary.spec: Do not sign kernel when no key provided (bsc#1187167). - kernel-binary.spec: Fix kernel-default-base scriptlets after packaging merge. - kernel-binary.spec: Require dwarves for kernel-binary-devel when BTF is enabled (jsc#SLE-17288). - kernel-binary.spec: suse-kernel-rpm-scriptlets required for uninstall as well. - kernel-cert-subpackage: Fix certificate location in scriptlets (bsc#1189841). - kernel-source.spec: install-kernel-tools also required on 15.4 - kernel-spec-macros: Since rpm 4.17 %verbose is unusable (bsc#1191229). The semantic changed in an incompatible way so invoking the macro now causes a build failure. - kprobes: Limit max data_size of the kretprobe instances (bsc#1193669). - livepatch: Avoid CPU hogging with cond_resched (bsc#1071995). - memstick: rtsx_usb_ms: fix UAF (bsc#1194516). - moxart: fix potential use-after-free on remove path (bsc#1194516). - net, xdp: Introduce xdp_init_buff utility routine (bsc#1193506). - net, xdp: Introduce xdp_prepare_buff utility routine (bsc#1193506). - net: Using proper atomic helper (bsc#1186222). - net: ipv6: Discard next-hop MTU less than minimum link MTU (bsc#1191241). - net: mana: Add RX fencing (bsc#1193506). - net: mana: Add XDP support (bsc#1193506). - net: mana: Allow setting the number of queues while the NIC is down (bsc#1193506). - net: mana: Fix spelling mistake "calledd" -> "called" (bsc#1193506). - net: mana: Fix the netdev_err()'s vPort argument in mana_init_port() (bsc#1193506). - net: mana: Improve the HWC error handling (bsc#1193506). - net: mana: Support hibernation and kexec (bsc#1193506). - net: mana: Use kcalloc() instead of kzalloc() (bsc#1193506). - objtool: Support Clang non-section symbols in ORC generation (bsc#1169514). - post.sh: detect /usr mountpoint too - recordmcount.pl: fix typo in s390 mcount regex (bsc#1192267). - recordmcount.pl: look for jgnop instruction as well as bcrl on s390 (bsc#1192267). - rpm/kernel-binary.spec.in: Use kmod-zstd provide. This makes it possible to use kmod with ZSTD support on non-Tumbleweed. - rpm/kernel-binary.spec.in: avoid conflicting suse-release suse-release had arbitrary values in staging, we can't use it for dependencies. The filesystem one has to be enough (boo#1184804). - rpm/kernel-binary.spec.in: do not strip vmlinux again (bsc#1193306). - rpm/kernel-binary.spec: Use only non-empty certificates. - rpm/kernel-obs-build.spec.in: make builds reproducible (bsc#1189305). - rpm/kernel-source.rpmlintrc: ignore new include/config files. - rpm/kernel-source.spec.in: do some more for vanilla_only. - rpm: Abolish image suffix (bsc#1189841). - rpm: Abolish scritplet templating (bsc#1189841). Outsource kernel-binary and KMP scriptlets to suse-module-tools. - rpm: Define $certs as rpm macro (bsc#1189841). - rpm: Fold kernel-devel and kernel-source scriptlets into spec files (bsc#1189841). - rpm: fix kmp install path - rpm: use _rpmmacrodir (boo#1191384) - tty: hvc: replace BUG_ON() with negative return value. - vfs: check fd has read access in kernel_read_file_from_fd() (bsc#1194888). - x86/xen: Mark cpu_bringup_and_idle() as dead_end_function (bsc#1169514). - xen/blkfront: do not take local copy of a request from the ring page (git-fixes). - xen/blkfront: do not trust the backend response data blindly (git-fixes). - xen/blkfront: read response from backend only once (git-fixes). - xen/netfront: disentangle tx_skb_freelist (git-fixes). - xen/netfront: do not read data from request on the ring page (git-fixes). - xen/netfront: do not trust the backend response data blindly (git-fixes). - xen/netfront: read response from backend only once (git-fixes). - xen: sync include/xen/interface/io/ring.h with Xen's newest version (git-fixes). - xfrm: fix MTU regression (bsc#1185377, bsc#1194048). Special Instructions and Notes: Please reboot the system after installing this update. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-366=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-366=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): kernel-default-base-debuginfo-4.12.14-197.105.1 kernel-vanilla-4.12.14-197.105.1 kernel-vanilla-base-4.12.14-197.105.1 kernel-vanilla-base-debuginfo-4.12.14-197.105.1 kernel-vanilla-debuginfo-4.12.14-197.105.1 kernel-vanilla-debugsource-4.12.14-197.105.1 kernel-vanilla-devel-4.12.14-197.105.1 kernel-vanilla-devel-debuginfo-4.12.14-197.105.1 kernel-vanilla-livepatch-devel-4.12.14-197.105.1 - openSUSE Leap 15.4 (ppc64le x86_64): kernel-debug-base-4.12.14-197.105.1 kernel-debug-base-debuginfo-4.12.14-197.105.1 - openSUSE Leap 15.4 (x86_64): kernel-kvmsmall-base-4.12.14-197.105.1 kernel-kvmsmall-base-debuginfo-4.12.14-197.105.1 - openSUSE Leap 15.4 (s390x): kernel-default-man-4.12.14-197.105.1 kernel-zfcpdump-man-4.12.14-197.105.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): kernel-default-base-debuginfo-4.12.14-197.105.1 kernel-vanilla-4.12.14-197.105.1 kernel-vanilla-base-4.12.14-197.105.1 kernel-vanilla-base-debuginfo-4.12.14-197.105.1 kernel-vanilla-debuginfo-4.12.14-197.105.1 kernel-vanilla-debugsource-4.12.14-197.105.1 kernel-vanilla-devel-4.12.14-197.105.1 kernel-vanilla-devel-debuginfo-4.12.14-197.105.1 kernel-vanilla-livepatch-devel-4.12.14-197.105.1 - openSUSE Leap 15.3 (ppc64le x86_64): kernel-debug-base-4.12.14-197.105.1 kernel-debug-base-debuginfo-4.12.14-197.105.1 - openSUSE Leap 15.3 (x86_64): kernel-kvmsmall-base-4.12.14-197.105.1 kernel-kvmsmall-base-debuginfo-4.12.14-197.105.1 - openSUSE Leap 15.3 (s390x): kernel-default-man-4.12.14-197.105.1 kernel-zfcpdump-man-4.12.14-197.105.1 References: https://www.suse.com/security/cve/CVE-2018-25020.html https://www.suse.com/security/cve/CVE-2019-15126.html https://www.suse.com/security/cve/CVE-2020-27820.html https://www.suse.com/security/cve/CVE-2021-0920.html https://www.suse.com/security/cve/CVE-2021-0935.html https://www.suse.com/security/cve/CVE-2021-28711.html https://www.suse.com/security/cve/CVE-2021-28712.html https://www.suse.com/security/cve/CVE-2021-28713.html https://www.suse.com/security/cve/CVE-2021-28714.html https://www.suse.com/security/cve/CVE-2021-28715.html https://www.suse.com/security/cve/CVE-2021-33098.html https://www.suse.com/security/cve/CVE-2021-3564.html https://www.suse.com/security/cve/CVE-2021-39648.html https://www.suse.com/security/cve/CVE-2021-39657.html https://www.suse.com/security/cve/CVE-2021-4002.html https://www.suse.com/security/cve/CVE-2021-4083.html https://www.suse.com/security/cve/CVE-2021-4135.html https://www.suse.com/security/cve/CVE-2021-4149.html https://www.suse.com/security/cve/CVE-2021-4197.html https://www.suse.com/security/cve/CVE-2021-4202.html https://www.suse.com/security/cve/CVE-2021-43975.html https://www.suse.com/security/cve/CVE-2021-43976.html https://www.suse.com/security/cve/CVE-2021-44733.html https://www.suse.com/security/cve/CVE-2021-45095.html https://www.suse.com/security/cve/CVE-2021-45486.html https://www.suse.com/security/cve/CVE-2022-0322.html https://www.suse.com/security/cve/CVE-2022-0330.html https://bugzilla.suse.com/1071995 https://bugzilla.suse.com/1124431 https://bugzilla.suse.com/1167162 https://bugzilla.suse.com/1169514 https://bugzilla.suse.com/1172073 https://bugzilla.suse.com/1179599 https://bugzilla.suse.com/1184804 https://bugzilla.suse.com/1185377 https://bugzilla.suse.com/1186207 https://bugzilla.suse.com/1186222 https://bugzilla.suse.com/1187167 https://bugzilla.suse.com/1189305 https://bugzilla.suse.com/1189841 https://bugzilla.suse.com/1190358 https://bugzilla.suse.com/1190428 https://bugzilla.suse.com/1191229 https://bugzilla.suse.com/1191241 https://bugzilla.suse.com/1191384 https://bugzilla.suse.com/1191731 https://bugzilla.suse.com/1192032 https://bugzilla.suse.com/1192267 https://bugzilla.suse.com/1192740 https://bugzilla.suse.com/1192845 https://bugzilla.suse.com/1192847 https://bugzilla.suse.com/1192877 https://bugzilla.suse.com/1192946 https://bugzilla.suse.com/1193306 https://bugzilla.suse.com/1193440 https://bugzilla.suse.com/1193442 https://bugzilla.suse.com/1193575 https://bugzilla.suse.com/1193669 https://bugzilla.suse.com/1193727 https://bugzilla.suse.com/1193731 https://bugzilla.suse.com/1193767 https://bugzilla.suse.com/1193861 https://bugzilla.suse.com/1193864 https://bugzilla.suse.com/1193867 https://bugzilla.suse.com/1193927 https://bugzilla.suse.com/1194001 https://bugzilla.suse.com/1194048 https://bugzilla.suse.com/1194087 https://bugzilla.suse.com/1194227 https://bugzilla.suse.com/1194302 https://bugzilla.suse.com/1194516 https://bugzilla.suse.com/1194529 https://bugzilla.suse.com/1194880 https://bugzilla.suse.com/1194888 https://bugzilla.suse.com/1194985 https://bugzilla.suse.com/1195166 https://bugzilla.suse.com/1195254

1 0

openSUSE-SU-2022:0030-1: important: Security update for chromium
by opensuse-security＠opensuse.org 07 Feb '22

07 Feb '22

openSUSE Security Update: Security update for chromium ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0030-1 Rating: important References: #1195420 Cross-References: CVE-2022-0452 CVE-2022-0453 CVE-2022-0454 CVE-2022-0455 CVE-2022-0456 CVE-2022-0457 CVE-2022-0459 CVE-2022-0460 CVE-2022-0461 CVE-2022-0462 CVE-2022-0463 CVE-2022-0464 CVE-2022-0465 CVE-2022-0466 CVE-2022-0467 CVE-2022-0468 CVE-2022-0469 CVE-2022-0470 Affected Products: openSUSE Backports SLE-15-SP3 ______________________________________________________________________________ An update that fixes 18 vulnerabilities is now available. Description: This update for chromium fixes the following issues: Chromium 98.0.4758.80 (boo#1195420) * CVE-2022-0452: Use after free in Safe Browsing * CVE-2022-0453: Use after free in Reader Mode * CVE-2022-0454: Heap buffer overflow in ANGLE * CVE-2022-0455: Inappropriate implementation in Full Screen Mode * CVE-2022-0456: Use after free in Web Search * CVE-2022-0457: Type Confusion in V8 * CVE-2022-0459: Use after free in Screen Capture * CVE-2022-0460: Use after free in Window Dialog * CVE-2022-0461: Policy bypass in COOP * CVE-2022-0462: Inappropriate implementation in Scroll * CVE-2022-0463: Use after free in Accessibility * CVE-2022-0464: Use after free in Accessibility * CVE-2022-0465: Use after free in Extensions * CVE-2022-0466: Inappropriate implementation in Extensions Platform * CVE-2022-0467: Inappropriate implementation in Pointer Lock * CVE-2022-0468: Use after free in Payments * CVE-2022-0469: Use after free in Cast * CVE-2022-0470: Out of bounds memory access in V8 * Various fixes from internal audits, fuzzing and other initiatives Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15-SP3: zypper in -t patch openSUSE-2022-30=1 Package List: - openSUSE Backports SLE-15-SP3 (aarch64 x86_64): chromedriver-98.0.4758.80-bp153.2.60.1 chromium-98.0.4758.80-bp153.2.60.1 References: https://www.suse.com/security/cve/CVE-2022-0452.html https://www.suse.com/security/cve/CVE-2022-0453.html https://www.suse.com/security/cve/CVE-2022-0454.html https://www.suse.com/security/cve/CVE-2022-0455.html https://www.suse.com/security/cve/CVE-2022-0456.html https://www.suse.com/security/cve/CVE-2022-0457.html https://www.suse.com/security/cve/CVE-2022-0459.html https://www.suse.com/security/cve/CVE-2022-0460.html https://www.suse.com/security/cve/CVE-2022-0461.html https://www.suse.com/security/cve/CVE-2022-0462.html https://www.suse.com/security/cve/CVE-2022-0463.html https://www.suse.com/security/cve/CVE-2022-0464.html https://www.suse.com/security/cve/CVE-2022-0465.html https://www.suse.com/security/cve/CVE-2022-0466.html https://www.suse.com/security/cve/CVE-2022-0467.html https://www.suse.com/security/cve/CVE-2022-0468.html https://www.suse.com/security/cve/CVE-2022-0469.html https://www.suse.com/security/cve/CVE-2022-0470.html https://bugzilla.suse.com/1195420

1 0

openSUSE-SU-2022:0330-1: important: Security update for glibc
by opensuse-security＠opensuse.org 04 Feb '22

04 Feb '22

openSUSE Security Update: Security update for glibc ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0330-1 Rating: important References: #1194640 #1194768 #1194770 #1194785 SLE-18195 Cross-References: CVE-2021-3999 CVE-2022-23218 CVE-2022-23219 CVSS scores: CVE-2021-3999 (SUSE): 7.4 CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2022-23218 (SUSE): 5.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L CVE-2022-23219 (SUSE): 5.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L Affected Products: openSUSE Leap 15.4 openSUSE Leap 15.3 ______________________________________________________________________________ An update that solves three vulnerabilities, contains one feature and has one errata is now available. Description: This update for glibc fixes the following issues: - CVE-2021-3999: Fixed incorrect errno in getcwd (bsc#1194640) - CVE-2022-23219: Fixed buffer overflow in sunrpc clnt_create for "unix" (bsc#1194768) - CVE-2022-23218: Fixed buffer overflow in sunrpc svcunix_create (bsc#1194770) Features added: - IBM Power 10 string operation improvements (bsc#1194785, jsc#SLE-18195) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-330=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-330=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): glibc-2.31-150300.9.12.1 glibc-debuginfo-2.31-150300.9.12.1 glibc-debugsource-2.31-150300.9.12.1 glibc-devel-2.31-150300.9.12.1 glibc-devel-debuginfo-2.31-150300.9.12.1 glibc-devel-static-2.31-150300.9.12.1 glibc-extra-2.31-150300.9.12.1 glibc-extra-debuginfo-2.31-150300.9.12.1 glibc-locale-2.31-150300.9.12.1 glibc-locale-base-2.31-150300.9.12.1 glibc-locale-base-debuginfo-2.31-150300.9.12.1 glibc-profile-2.31-150300.9.12.1 glibc-utils-2.31-150300.9.12.1 glibc-utils-debuginfo-2.31-150300.9.12.1 glibc-utils-src-debugsource-2.31-150300.9.12.1 nscd-2.31-150300.9.12.1 nscd-debuginfo-2.31-150300.9.12.1 - openSUSE Leap 15.4 (noarch): glibc-html-2.31-150300.9.12.1 glibc-i18ndata-2.31-150300.9.12.1 glibc-info-2.31-150300.9.12.1 glibc-lang-2.31-150300.9.12.1 - openSUSE Leap 15.4 (x86_64): glibc-32bit-2.31-150300.9.12.1 glibc-32bit-debuginfo-2.31-150300.9.12.1 glibc-devel-32bit-2.31-150300.9.12.1 glibc-devel-32bit-debuginfo-2.31-150300.9.12.1 glibc-devel-static-32bit-2.31-150300.9.12.1 glibc-locale-base-32bit-2.31-150300.9.12.1 glibc-locale-base-32bit-debuginfo-2.31-150300.9.12.1 glibc-profile-32bit-2.31-150300.9.12.1 glibc-utils-32bit-2.31-150300.9.12.1 glibc-utils-32bit-debuginfo-2.31-150300.9.12.1 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): glibc-2.31-150300.9.12.1 glibc-debuginfo-2.31-150300.9.12.1 glibc-debugsource-2.31-150300.9.12.1 glibc-devel-2.31-150300.9.12.1 glibc-devel-debuginfo-2.31-150300.9.12.1 glibc-devel-static-2.31-150300.9.12.1 glibc-extra-2.31-150300.9.12.1 glibc-extra-debuginfo-2.31-150300.9.12.1 glibc-locale-2.31-150300.9.12.1 glibc-locale-base-2.31-150300.9.12.1 glibc-locale-base-debuginfo-2.31-150300.9.12.1 glibc-profile-2.31-150300.9.12.1 glibc-utils-2.31-150300.9.12.1 glibc-utils-debuginfo-2.31-150300.9.12.1 glibc-utils-src-debugsource-2.31-150300.9.12.1 nscd-2.31-150300.9.12.1 nscd-debuginfo-2.31-150300.9.12.1 - openSUSE Leap 15.3 (noarch): glibc-html-2.31-150300.9.12.1 glibc-i18ndata-2.31-150300.9.12.1 glibc-info-2.31-150300.9.12.1 glibc-lang-2.31-150300.9.12.1 - openSUSE Leap 15.3 (x86_64): glibc-32bit-2.31-150300.9.12.1 glibc-32bit-debuginfo-2.31-150300.9.12.1 glibc-devel-32bit-2.31-150300.9.12.1 glibc-devel-32bit-debuginfo-2.31-150300.9.12.1 glibc-devel-static-32bit-2.31-150300.9.12.1 glibc-locale-base-32bit-2.31-150300.9.12.1 glibc-locale-base-32bit-debuginfo-2.31-150300.9.12.1 glibc-profile-32bit-2.31-150300.9.12.1 glibc-utils-32bit-2.31-150300.9.12.1 glibc-utils-32bit-debuginfo-2.31-150300.9.12.1 References: https://www.suse.com/security/cve/CVE-2021-3999.html https://www.suse.com/security/cve/CVE-2022-23218.html https://www.suse.com/security/cve/CVE-2022-23219.html https://bugzilla.suse.com/1194640 https://bugzilla.suse.com/1194768 https://bugzilla.suse.com/1194770 https://bugzilla.suse.com/1194785

1 0

openSUSE-SU-2022:0333-1: important: Security update for xen
by opensuse-security＠opensuse.org 04 Feb '22

04 Feb '22

openSUSE Security Update: Security update for xen ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0333-1 Rating: important References: #1194576 #1194581 #1194588 Cross-References: CVE-2022-23033 CVE-2022-23034 CVE-2022-23035 CVSS scores: CVE-2022-23034 (SUSE): 4 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L CVE-2022-23035 (SUSE): 6.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that fixes three vulnerabilities is now available. Description: This update for xen fixes the following issues: - CVE-2022-23033: Fixed guest_physmap_remove_page not removing the p2m mappings. (XSA-393) (bsc#1194576) - CVE-2022-23034: Fixed possible DoS by a PV guest Xen while unmapping a grant. (XSA-394) (bsc#1194581) - CVE-2022-23035: Fixed insufficient cleanup of passed-through device IRQs. (XSA-395) (bsc#1194588) Special Instructions and Notes: Please reboot the system after installing this update. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-333=1 Package List: - openSUSE Leap 15.3 (aarch64 x86_64): xen-4.14.3_06-150300.3.18.2 xen-debugsource-4.14.3_06-150300.3.18.2 xen-devel-4.14.3_06-150300.3.18.2 xen-doc-html-4.14.3_06-150300.3.18.2 xen-libs-4.14.3_06-150300.3.18.2 xen-libs-debuginfo-4.14.3_06-150300.3.18.2 xen-tools-4.14.3_06-150300.3.18.2 xen-tools-debuginfo-4.14.3_06-150300.3.18.2 xen-tools-domU-4.14.3_06-150300.3.18.2 xen-tools-domU-debuginfo-4.14.3_06-150300.3.18.2 - openSUSE Leap 15.3 (noarch): xen-tools-xendomains-wait-disk-4.14.3_06-150300.3.18.2 - openSUSE Leap 15.3 (x86_64): xen-libs-32bit-4.14.3_06-150300.3.18.2 xen-libs-32bit-debuginfo-4.14.3_06-150300.3.18.2 References: https://www.suse.com/security/cve/CVE-2022-23033.html https://www.suse.com/security/cve/CVE-2022-23034.html https://www.suse.com/security/cve/CVE-2022-23035.html https://bugzilla.suse.com/1194576 https://bugzilla.suse.com/1194581 https://bugzilla.suse.com/1194588

1 0

openSUSE-SU-2022:0334-1: moderate: Security update for containerd, docker
by opensuse-security＠opensuse.org 04 Feb '22

04 Feb '22

openSUSE Security Update: Security update for containerd, docker ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0334-1 Rating: moderate References: #1191015 #1191121 #1191334 #1191434 #1193273 Cross-References: CVE-2021-41089 CVE-2021-41091 CVE-2021-41092 CVE-2021-41103 CVE-2021-41190 CVSS scores: CVE-2021-41089 (NVD) : 6.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:L/I:L/A:L CVE-2021-41089 (SUSE): 3.6 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:N CVE-2021-41091 (NVD) : 6.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:L/I:L/A:L CVE-2021-41091 (SUSE): 6.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:L/I:L/A:L CVE-2021-41092 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N CVE-2021-41092 (SUSE): 5.4 CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:C/C:H/I:N/A:N CVE-2021-41103 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-41103 (SUSE): 5.9 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L CVE-2021-41190 (NVD) : 3 CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:C/C:N/I:L/A:N CVE-2021-41190 (SUSE): 5 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:N/I:L/A:N Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that fixes 5 vulnerabilities is now available. Description: This update for containerd, docker fixes the following issues: - CVE-2021-41089: Fixed "cp" can chmod host files (bsc#1191015). - CVE-2021-41091: Fixed flaw that could lead to data directory traversal in moby (bsc#1191434). - CVE-2021-41092: Fixed exposed user credentials with a misconfigured configuration file (bsc#1191334). - CVE-2021-41103: Fixed file access to local users in containerd (bsc#1191121). - CVE-2021-41190: Fixed OCI manifest and index parsing confusion (bsc#1193273). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-334=1 Package List: - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): containerd-1.4.12-60.1 containerd-ctr-1.4.12-60.1 docker-20.10.12_ce-159.1 docker-debuginfo-20.10.12_ce-159.1 docker-kubic-20.10.12_ce-159.1 docker-kubic-debuginfo-20.10.12_ce-159.1 docker-kubic-kubeadm-criconfig-20.10.12_ce-159.1 - openSUSE Leap 15.3 (noarch): docker-bash-completion-20.10.12_ce-159.1 docker-fish-completion-20.10.12_ce-159.1 docker-kubic-bash-completion-20.10.12_ce-159.1 docker-kubic-fish-completion-20.10.12_ce-159.1 docker-kubic-zsh-completion-20.10.12_ce-159.1 docker-zsh-completion-20.10.12_ce-159.1 References: https://www.suse.com/security/cve/CVE-2021-41089.html https://www.suse.com/security/cve/CVE-2021-41091.html https://www.suse.com/security/cve/CVE-2021-41092.html https://www.suse.com/security/cve/CVE-2021-41103.html https://www.suse.com/security/cve/CVE-2021-41190.html https://bugzilla.suse.com/1191015 https://bugzilla.suse.com/1191121 https://bugzilla.suse.com/1191334 https://bugzilla.suse.com/1191434 https://bugzilla.suse.com/1193273

1 0

openSUSE-SU-2022:0024-1: important: Security update for lighttpd
by opensuse-security＠opensuse.org 02 Feb '22

02 Feb '22

openSUSE Security Update: Security update for lighttpd ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0024-1 Rating: important References: #1146452 #1181400 #1194376 Cross-References: CVE-2022-22707 CVSS scores: CVE-2022-22707 (NVD) : 5.9 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Backports SLE-15-SP3 ______________________________________________________________________________ An update that solves one vulnerability and has two fixes is now available. Description: This update for lighttpd fixes the following issues: lighttpd was updated to 1.4.64: * CVE-2022-22707: off-by-one stack overflow in the mod_extforward plugin (boo#1194376) * graceful restart/shutdown timeout changed from 0 (disabled) to 8 seconds. configure an alternative with: server.feature-flags += (��server.graceful-shutdown-timeout�� => 8) * deprecated modules (previously announced) have been removed: mod_authn_mysql, mod_mysql_vhost, mod_cml, mod_flv_streaming, mod_geoip, mod_trigger_b4_dl update to 1.4.63: * import xxHash v0.8.1 * fix reqpool mem corruption in 1.4.62 includes changes in 1.4.62: * [mod_alias] fix use-after-free bug * many developer visible bug fixes update to 1.4.61: * mod_dirlisting: sort "../" to top * fix HTTP/2 upload > 64k w/ max-request-size * code level and developer visible bug fixes update to 1.4.60: * HTTP/2 smoother and lower memory use (in general) * HTTP/2 tuning to better handle aggressive client initial requests * reduce memory footprint; workaround poor glibc behavior; jemalloc is better * mod_magnet lua performance improvements * mod_dirlisting performance improvements and new caching option * memory constraints for extreme edge cases in mod_dirlisting, mod_ssi, mod_webdav * connect(), write(), read() time limits on backends (separate from client timeouts) * lighttpd restarts if large discontinuity in time occurs (embedded systems) * RFC7233 Range support for all non-streaming responses, not only static files * connect() to backend now has default 8 second timeout (configurable) - Added hardening to systemd service(s) (boo#1181400). update to 1.4.59: * HTTP/2 enabled by default * mod_deflate zstd suppport * new mod_ajp13 Update to 1.4.58: * [mod_wolfssl] use wolfSSL TLS version defines * [mod_wolfssl] compile with earlier wolfSSL vers * [core] prefer IPv6+IPv4 func vs IPv4-specific func * [core] reuse large mem chunks (fix mem usage) (fixes #3033) * [core] add comment for FastCGI mem use in hctx->rb (#3033) * [mod_proxy] fix sending of initial reqbody chunked * [multiple] fdevent_waitpid() wrapper * [core] sys-time.h - localtime_r,gmtime_r macros * [core] http_date.[ch] encapsulate HTTP-date parse * [core] specialized strptime() for HTTP date fmts * [multiple] employ http_date.h, sys-time.h * [core] http_date_timegm() (portable timegm()) * buffer_append_path_len() to join paths * [core] inet_ntop_cache -> sock_addr_cache * [multiple] etag.[ch] -> http_etag.[ch]; better imp * [core] fix crash after specific err in config file * [core] fix bug in FastCGI uploads (#3033) * [core] http_response_match_if_range() * [mod_webdav] typedef off_t loff_t for FreeBSD * [multiple] chunkqueue_write_chunk() * [build] add GNUMAKEFLAGS=--no-print-directory * [core] fix bug in read retry found by coverity * [core] attempt to quiet some coverity warnings * [mod_webdav] compile fix for Mac OSX/11 * [core] handle U+00A0 in config parser * [core] fix lighttpd -1 one-shot with pipes * [core] quiet start/shutdown trace in one-shot mode * [core] allow keep-alives in one-shot mode (#3042) * [mod_webdav] define _ATFILE_SOURCE if AT_FDCWD * [core] setsockopt IPV6_V6ONLY if server.v4mapped * [core] prefer inet_aton() over inet_addr() * [core] add missing mod_wolfssl to ssl compat list * [mod_openssl] remove ancient preprocessor logic * [core] SHA512_Init, SHA512_Update, SHA512_Final * [mod_wolfssl] add complex preproc logic for SNI * [core] wrap a macro value with parens * [core] fix handling chunked response from backend (fixes #3044) * [core] always set file.fd = -1 on FILE_CHUNK reset (fixes #3044) * [core] skip some trace if backend Upgrade (#3044) * [TLS] cert-staple.sh POSIX sh compat (fixes #3043) * [core] portability fix if st_mtime not defined * [mod_nss] portability fix * [core] warn if mod_authn_file needed in conf * [core] fix chunked decoding from backend (fixes #3044) * [core] reject excess data after chunked encoding (#3046) * [core] track chunked encoding state from backend (fixes #3046) * [core] li_restricted_strtoint64() * [core] track Content-Length from backend (fixes #3046) * [core] enhance config parsing debugging (#3047) * [core] reorder srv->config_context to match ndx (fixes #3047) * [mod_proxy] proxy.header = ("force-http10" => ...) * [mod_authn_ldap] fix crash (fixes #3048) * [mod_authn_ldap, mod_vhostdb_ldap] default cafile * [core] fix array_copy_array() sorted[] * [multiple] replace fall through comment with attr * [core] fix crash printing trace if backend is down * [core] fix decoding chunked from backend (fixes #3049) * [core] attempt to quiet some coverity warnings * [core] perf: request processing * [core] http_header_str_contains_token() * [mod_flv_streaming] parse query string w/o copying * [mod_evhost] use local array to split values * [core] remove srv->split_vals * [core] add User-Agent to http_header_e enum * [core] store struct server * in struct connection * [core] use func rc to indicate done reading header * [core] replace connection_set_state w/ assignment * [core] do not pass srv to http header parsing func * [core] cold buffer_string_prepare_append_resize() * [core] chunkqueue_compact_mem() * [core] connection_chunkqueue_compact() * [core] pass con around request, not srv and con * [core] reduce use of struct parse_header_state * [core] perf: HTTP header parsing using \n offsets * [core] no need to pass srv to connection_set_state * [core] perf: connection_read_header_more() * [core] perf: connection_read_header_hoff() hot * [core] inline connection_read_header() * [core] pass ptr to http_request_parse() * [core] more 'const' in request.c prototypes * [core] handle common case of alnum or - field-name * [mod_extforward] simplify code: use light_isxdigit * [core] perf: array.c performance enhancements * [core] mark some data_* funcs cold * [core] http_header.c internal inline funcs * [core] remove unused array_reset() * [core] prefer uint32_t to size_t in base.h * [core] uint32_t for struct buffer sizes * [core] remove unused members of struct server * [core] short-circuit path to clear request.headers * [core] array keys are non-empty in key-value list * [core] keep a->data[] sorted; remove a->sorted[] * [core] __attribute_returns_nonnull__ * [core] differentiate array_get_* for ro and rw * [core] (const buffer *) in (struct burl_parts_t) * [core] (const buffer *) for con->server_name * [core] perf: initialize con->conf using memcpy() * [core] run config_setup_connection() fewer times * [core] isolate data_config.c, vector.c * [core] treat con->conditional_is_valid as bitfield * [core] http_header_hkey_get() over const array * [core] inline buffer as part of DATA_UNSET key * [core] inline buffer key for *_patch_connection() * [core] (data_unset *) from array_get_element_klen * [core] inline buffer as part of data_string value * [core] add const to callers of http_header_*_get() * [core] inline array as part of data_array value * [core] const char *op in data_config * [core] buffer string in data_config * [core] streamline config_check_cond() * [core] keep a->data[] sorted (REVERT) * [core] array a->sorted[] as ptrs rather than pos * [core] inline header and env arrays into con * [mod_accesslog] avoid alloc for parsing cookie val * [core] simpler config_check_cond() * [mod_redirect,mod_rewrite] store context_ndx * [core] const char *name in struct plugin * [core] srv->plugin_slots as compact list * [core] rearrange server_config, server members * [core] macros CONST_LEN_STR and CONST_STR_LEN * [core] struct plugin_data_base * [core] improve condition caching perf * [core] config_plugin_values_init() new interface * [mod_access] use config_plugin_values_init() * [core] (const buffer *) from strftime_cache_get() * [core] mv config_setup_connection to connections.c * [core] use (const char *) in config file parsing * [mod_staticfile] use config_plugin_values_init() * [mod_skeleton] use config_plugin_values_init() * [mod_setenv] use config_plugin_values_init() * [mod_alias] use config_plugin_values_init() * [mod_indexfile] use config_plugin_values_init() * [mod_expire] use config_plugin_values_init() * [mod_flv_streaming] use config_plugin_values_init() * [mod_magnet] use config_plugin_values_init() * [mod_usertrack] use config_plugin_values_init() * [mod_userdir] split policy from userdir path build * [mod_userdir] use config_plugin_values_init() * [mod_ssi] use config_plugin_values_init() * [mod_uploadprogress] use config_plugin_values_init() * [mod_status] use config_plugin_values_init() * [mod_cml] use config_plugin_values_init() * [mod_secdownload] use config_plugin_values_init() * [mod_geoip] use config_plugin_values_init() * [mod_evasive] use config_plugin_values_init() * [mod_trigger_b4_dl] use config_plugin_values_init() * [mod_accesslog] use config_plugin_values_init() * [mod_simple_vhost] use config_plugin_values_init() * [mod_evhost] use config_plugin_values_init() * [mod_vhostdb*] use config_plugin_values_init() * [mod_mysql_vhost] use config_plugin_values_init() * [mod_maxminddb] use config_plugin_values_init() * [mod_auth*] use config_plugin_values_init() * [mod_deflate] use config_plugin_values_init() * [mod_compress] use config_plugin_values_init() * [core] add xsendfile* check if xdocroot is NULL * [mod_cgi] use config_plugin_values_init() * [mod_dirlisting] use config_plugin_values_init() * [mod_extforward] use config_plugin_values_init() * [mod_webdav] use config_plugin_values_init() * [core] store addtl data in pcre_keyvalue_buffer * [mod_redirect] use config_plugin_values_init() * [mod_rewrite] use config_plugin_values_init() * [mod_rrdtool] use config_plugin_values_init() * [multiple] gw_backends config_plugin_values_init() * [core] config_get_config_cond_info() * [mod_openssl] use config_plugin_values_init() * [core] use config_plugin_values_init() * [core] collect more config logic into configfile.c * [core] config_plugin_values_init_block() * [core] gw_backend config_plugin_values_init_block * [core] remove old config_insert_values_*() funcs * [multiple] plugin.c handles common FREE_FUNC code * [core] run all trigger and sighup handlers * [mod_wstunnel] change DEBUG_LOG to use log_error() * [core] stat_cache_path_contains_symlink use errh * [core] isolate use of data_config, configfile.h * [core] split cond cache from cond matches * [mod_auth] inline arrays in http_auth_require_t * [core] array_init() arg for initial size * [core] gw_exts_clear_check_local() * [core] gw_backend less pointer chasing * [core] connection_handle_errdoc() separate func * [multiple] prefer (connection *) to (srv *) * [core] create http chunk header on the stack * [multiple] connection hooks no longer get (srv *) * [multiple] plugin_stats array * [core] read up-to fixed size chunk before fionread * [core] default chunk size 8k (was 4k) * [core] pass con around gw_backend instead of srv * [core] log_error_multiline_buffer() * [multiple] reduce direct use of srv->cur_ts * [multiple] extern log_epoch_secs * [multiple] reduce direct use of srv->errh * [multiple] stat_cache singleton * [mod_expire] parse config into structured data * [multiple] generic config array type checking * [multiple] rename r to rc rv rd wr to be different * [core] (minor) config_plugin_keys_t data packing * [core] inline buffer in log_error_st errh * [multiple] store srv->tmp_buf in tb var * [multiple] quiet clang compiler warnings * [core] http_status_set_error_close() * [core] http_request_host_policy w/ http_parseopts * [multiple] con->proto_default_port * [core] store log filename in (log_error_st *) * [core] separate log_error_open* funcs * [core] fdevent uses uint32_t instead of size_t * [mod_webdav] large buffer reuse * [mod_accesslog] flush file log buffer at 8k size * [core] include settings.h where used * [core] static buffers for mtime_cache * [core] convenience macros to check req methods * [core] support multiple error logs * [multiple] omit passing srv to fdevent_handler * [core] remove unused arg to fdevent_fcntl_set_nb* * [core] slightly simpify server_(over)load_check() * [core] isolate fdevent subsystem * [core] isolate stat_cache subsystem * [core] remove include base.h where unused * [core] restart dead piped loggers every 64 sec * [mod_webdav] use copy_file_range() if available * [core] perf: buffer copy and append * [core] copy some srv->srvconf into con->conf * [core] move keep_alive flag into request_st * [core] pass scheme port to http_request_parse() * [core] pass http_parseopts around request.c * [core] rename specific_config to request_config * [core] move request_st,request_config to request.h * [core] pass (request_st *) to request.c funcs * [core] remove unused request_st member 'request' * [core] rename content_length to reqbody_length * [core] t/test_request.c using (request_st *) * [core] (const connection *) in http_header_*_get() * [mod_accesslog] log_access_record() fmt log record * [core] move request start ts into (request_st *) * [core] move addtl request-specific struct members * [core] move addtl request-specific struct members * [core] move plugin_ctx into (request_st *) * [core] move addtl request-specific struct members * [core] move request state into (request_st *) * [core] store (plugin *) in p->data * [core] store subrequest_handler instead of mode * [multiple] copy small struct instead of memcpy() * [multiple] split con, request (very large change) * [core] r->uri.path always set, though might be "" * [core] C99 restrict on some base funcs * [core] dispatch handler in handle_request func * [core] http_request_parse_target() * [mod_magnet] modify r->target with "uri.path-raw" * [core] remove r->uri.path_raw; generate as needed * [core] http_response_comeback() * [core] http_response_config() * [tests] use buffer_eq_slen() for str comparison * [core] http_status_append() short-circuit 200 OK * [core] mark some chunk.c funcs as pure * [core] use uint32_t in http_header.[ch] * [core] perf: tighten some code in some hot paths * [core] parse header label before end of line * [mod_auth] "nonce_secret" option to validate nonce (fixes #2976) * [build] fix build on MacOS X Tiger * [doc] lighttpd.conf: lighttpd choose event-handler * [config] blank server.tag if whitespace-only * [mod_proxy] stream request using HTTP/1.1 chunked (fixes #3006) * [multiple] correct misspellings in comments * [multiple] fix some cc warnings in 32-bit, powerpc * [tests] fix skip count in mod-fastcgi w/o php-cgi * [multiple] ./configure --with-nettle to use Nettle * [core] skip excess close() when FD_CLOEXEC defined * [mod_cgi] remove redundant calls to set FD_CLOEXEC * [core] return EINVAL if stat_cache_get_entry w/o / * [mod_webdav] define PATH_MAX if not defined * [mod_accesslog] process backslash-escapes in fmt * [mod_openssl] disable cert vrfy if ALPN acme-tls/1 * [core] add seed before openssl RAND_pseudo_bytes() * [mod_mbedtls] mbedTLS option for TLS * [core] prefer getxattr() instead of get_attr() * [multiple] use *(unsigned char *) with ctypes * [mod_openssl] do not log ECONNRESET unless debug * [mod_openssl] SSL_R_UNEXPECTED_EOF_WHILE_READING * [mod_gnutls] GnuTLS option for TLS (fixes #109) * [mod_openssl] rotate session ticket encryption key * [mod_openssl] set cert from callback in 1.0.2+ (fixes #2842) * [mod_openssl] set chains from callback in 1.0.2+ (#2842) * [core] RFC-strict parse of Content-Length * [build] point ./configure --help to support forum * [core] stricter parse of numerical digits * [multiple] add summaries to top of some modules * [core] sys-crypto-md.h w/ inline message digest fn * [mod_openssl] enable read-ahead, if set, after SNI * [mod_openssl] issue warning for deprecated options * [mod_openssl] use SSL_OP_NO_RENEGOTIATION if avail * [mod_openssl] use openssl feature define for ALPN * [mod_openssl] update default DH params * [core] SecureZeroMemory() on _WIN32 * [core] safe memset calls memset() through volatile * [doc] update comments in doc/config/modules.conf * [core] more precise check for request stream flags * [mod_openssl] rotate session ticket encryption key * [mod_openssl] ssl.stek-file to specify encrypt key * [mod_mbedtls] ssl.stek-file to specify encrypt key * [mod_gnutls] ssl.stek-file to specify encrypt key * [mod_openssl] disable session cache; prefer ticket * [mod_openssl] compat with LibreSSL * [mod_openssl] compat with WolfSSL * [mod_openssl] set SSL_OP_PRIORITIZE_CHACHA * [mod_openssl] move SSL_CTX curve conf to new func * [mod_openssl] basic SSL_CONF_cmd for alt TLS libs * [mod_openssl] OCSP stapling (fixes #2469) * [TLS] cert-staple.sh - refresh OCSP responses (#2469) * [mod_openssl] compat with BoringSSL * [mod_gnutls] option to override GnuTLS priority * [mod_gnutls] OCSP stapling (#2469) * [mod_extforward] config warning for module order * [mod_webdav] store webdav.opts as bitflags * [mod_webdav] limit webdav_propfind_dir() recursion * [mod_webdav] unsafe-propfind-follow-symlink option * [mod_webdav] webdav.opts "propfind-depth-infinity" * [mod_openssl] detect certs marked OCSP Must-Staple * [mod_gnutls] detect certs marked OCSP Must-Staple * [mod_openssl] default to set MinProtocol TLSv1.2 * [mod_nss] NSS option for TLS (fixes #1218) * [core] fdevent_load_file() shared code * [mod_openssl,mbedtls,gnutls,nss] fdevent_load_file * [core] error if s->socket_perms chmod() fails * [mod_openssl] prefer some WolfSSL native APIs * quiet clang analyzer scan-build warnings * [core] uint32_t is plenty large for path names * [mod_mysql_vhost] deprecated; use mod_vhostdb_mysql * [core] splaytree_djbhash() in splaytree.h (reuse) * [cmake] update deps for src/t/test_* * [cmake] update deps for src/t/test_* * [build] remove tests/mod-userdir.t from builds * [build] fix typo in src/Makefile.am EXTRA_DIST * [core] remove unused mbedtls_enabled flag * [core] store fd in srv->stdin_fd during setup * [multiple] address coverity warnings * [mod_webdav] fix theoretical NULL dereference * [mod_webdav] update rc for PROPFIND allprop * [mod_webdav] build fix: ifdef live_properties * [multiple] address coverity warnings * [meson] fix libmariadb dependency * [meson] add missing libmaxminddb section * [mod_auth,mod_vhostdb] add caching option (fixes #2805) * [mod_authn_ldap,mod_vhostdb_ldap] add timeout opt (#2805) * [mod_auth] accept "nonce-secret" & "nonce_secret" * [mod_openssl] fix build warnings on MacOS X * [core] Nettle assert()s if buffer len > digest sz * [mod_authn_dbi] authn backend employing DBI * [mod_authn_mysql,file] use crypt() to save stack * [mod_vhostdb_dbi] allow strings and ints in config * add ci-build.sh * move ci-build.sh to scripts * [build] build fixes for AIX * [mod_deflate] Brotli support * [build] bzip2 default to not-enabled in build * [mod_deflate] fix typo in config option * [mod_deflate] propagate errs from internal funcs * [mod_deflate] deflate.cache-dir compressed cache * [mod_deflate] mod_deflate subsumes mod_compress * [doc] mod_compress -> mod_deflate * [tests] mod_compress -> mod_deflate * [mod_compress] remove mod_compress * [build] add --with-brotli to CI build * [core] server.feature-flags extensible config * [core] con layer plugin_ctx separate from request * [multiple] con hooks store ctx in con->plugin_ctx * [core] separate funcs to reset (request_st *) * [multiple] rename connection_reset hook to request * [mod_nss] func renames for consistency * [core] detect and reject TLS connect to cleartext * [mod_deflate] quicker check for Content-Encoding * [mod_openssl] read secret data w/ BIO_new_mem_buf * [core] decode Transfer-Encoding: chunked from gw * [mod_fastcgi] decode Transfer-Encoding: chunked * [core] stricter parsing of POST chunked block hdr * [mod_proxy] send HTTP/1.1 requests to backends * [tests] test_base64.c clear buf vs reset * [core] http_header_remove_token() * [mod_webdav] fix inadvertent string truncation * [core] add some missing standard includes * [mod_extforward] attempt to quiet Coverity warning * [mod_authn_dbi,mod_authn_mysql] fix coverity issue * scons: fix check environment * Add avahi service file under doc/avahi/ * [mod_webdav] fix fallback if linkat() fails * [mod_proxy] do not forward Expect: 100-continue * [core] chunkqueue_compact_mem() must upd cq->last * [core] dlsym for FAMNoExists() for compat w/ fam * [core] disperse settings.h to appropriate headers * [core] inline buffer_reset() * [mod_extforward] save proto per connection * [mod_extforward] skip after HANDLER_COMEBACK * [core] server.feature-flags to enable h2 * [core] HTTP_VERSION_2 * [multiple] allow TLS ALPN "h2" if "server.h2proto" * [mod_extforward] preserve changed addr for h2 con * [core] do not send Connection: close if h2 * [core] lowercase response hdr field names for h2 * [core] recognize status: 421 Misdirected Request * [core] parse h2 pseudo-headers * [core] request_headers_process() * [core] connection_state_machine_loop() * [core] reset connection counters per connection * [mod_accesslog,mod_rrdtool] HTTP/2 basic accounting * [core] connection_set_fdevent_interest() * [core] HTTP2-Settings * [core] adjust http_request_headers_process() * [core] http_header_parse_hoff() * [core] move http_request_headers_process() * [core] reqpool.[ch] for (request_st *) * [multiple] modules read reqbody via fn ptr * [multiple] isolate more con code in connections.c * [core] isolate more resp code in response.c * [core] h2.[ch] with stub funcs (incomplete) * [core] alternate between two joblists * [core] connection transition to HTTP/2; incomplete * [core] mark some error paths with attribute cold * [core] discard 100 102 103 responses from backend * [core] skip write throttle for 100 Continue * [core] adjust (disabled) debug code * [core] update comment * [core] link in ls-hpack (EXPERIMENTAL) * [core] HTTP/2 HPACK using LiteSpeed ls-hpack * [core] h2_send_headers() specialized for resp hdrs * [core] http_request_parse_header() specialized * [core] comment possible future ls-hpack optimize * [mod_status] separate funcs to print request table * [mod_status] adjust to print HTTP/2 requests * [core] redirect to dir using relative-path * [core] ignore empty field-name from backends * [mod_auth] fix crash if auth.require misconfigured (fixes #3023) * [core] fix 1-char trunc of default server.tag * [core] request_acquire(), request_release() * [core] keep pool of (request_st *) for HTTP/2 * [mod_status] dedicated funcs for r->state labels * [core] move connections_get_state to connections.c * [core] fix crash on master after graceful restart * [core] defer optimization to read small files * [core] do not require '\0' term for k,v hdr parse * [scripts] cert-staple.sh enhancements * [core] document algorithm used in lighttpd etag * [core] ls-hpack optimizations * [core] fix crash on master if blank line request * [core] use djbhash in gw_backend to choose host * [core] rename md5.[ch] to algo_md5.[ch] * [core] move djbhash(), dekhash() to algo_md.h * [core] rename splaytree.[ch] to algo_splaytree.[ch] * [core] import xxHash v0.8.0 * [build] modify build, includes for xxHash v0.8.0 * [build] remove ls-hpack/deps * [core] xxhash no inline hints; let compiler choose * [mod_dirlisting] fix config parsing crash * [mod_openssl] clarify trace w/ deprecated options * [doc] refresh doc/config/*/* * [core] code size: disable XXH64(), XXH3() * [doc] update README and INSTALL * [core] combine Cookie request headers with ';' * [core] log stream id with debug.log-state-handling * [core] set r->state in h2.c * [mod_ssi] update chunk after shell output redirect * [mod_webdav] preserve bytes_out when chunks merged * [multiple] inline chunkqueue_length() * [core] cold h2_log_response_header*() funcs * [core] update HTTP status codes list from IANA * [mod_wolfssl] standalone module * [core] Content-Length in http_response_send_file() * [core] adjust response header prep for common case * [core] light_isupper(), light_islower() * [core] tst,set,clr macros for r->{rqst,resp}_htags * [core] separate http_header_e from _htags bitmask * [core] http_header_hkey_get_lc() for HTTP/2 * [core] array.[ch] using uint32_t instead of size_t * [core] extend (data_string *) to store header id * [multiple] extend enum http_header_e list * [core] http_header_e <=> lshpack_static_hdr_idx * [core] skip ls-hpack decode work unused by lighttpd * [TLS] error if inherit empty TLS cfg from globals * [core] connection_check_expect_100() * [core] support multiple 1xx responses from backend * [core] reload c after chunkqueue_compact_mem() * [core] relay 1xx from backend over HTTP/2 * [core] relay 1xx from backend over HTTP/1.1 * [core] chunkqueue_{peek,read}_data(), squash * [multiple] TLS modules use chunkqueue_peek_data() * [mod_magnet] magnet.attract-response-start-to * [multiple] code reuse chunkqueue_peek_data() * [core] reuse r->start_hp.tv_sec for r->start_ts * [core] config_plugin_value_tobool() accept "0","1" * [core] graceful and immediate restart option * [mod_ssi] init status var before waitpid() * [core] graceful shutdown timeout option * [core] lighttpd -1 supports pipes (e.g. netcat) * [core] perf adjustments to avoid load miss * [multiple] use sock_addr_get_family in more places * [multiple] inline chunkqueue where always alloc'd * [core] propagate state after writing * [core] server_run_con_queue() * [core] defer handling FDEVENT_HUP and FDEVENT_ERR * [core] handle unexpected EOF reading FILE_CHUNK * [core] short-circuit connection_write_throttle() * [core] walk queue in connection_write_chunkqueue() * [core] connection_joblist global * [core] be more precise checking streaming flags * [core] fdevent_load_file_bytes() * [TLS] use fdevent_load_file_bytes() for STEK file * [core] allow symlinks under /dev for rand devices * [multiple] use light_btst() for hdr existence chk * [mod_deflate] fix potential NULL deref in err case * [core] save errno around close() if fstat() fails * [mod_ssi] use stat_cache_open_rdonly_fstat() * [core] fdevent_dup_cloexec() * [core] dup FILE_CHUNK fd when splitting FILE_CHUNK * [core] stat_cache_path_isdir() * [multiple] use stat_cache_path_isdir() * [mod_mbedtls] quiet CLOSE_NOTIFY after conn reset * [mod_gnutls] quiet CLOSE_NOTIFY after conn reset * [core] limit num ranges in Range requests * [core] remove unused r->content_length * [core] http_response_parse_range() const file sz * [core] pass open fd to http_response_parse_range * [core] stat_cache_get_entry_open() * [core,mod_deflate] leverage cache of open fd * [doc] comment out config disabling Range for .pdf * [core] coalesce nearby ranges in Range requests * [mod_fastcgi] decode chunked is cold code path * [core] fix chunkqueue_compact_mem w/ partial chunk * [core] alloc optim reading file, sending chunked * [core] reuse chunkqueue_compact_mem*() * [mod_cgi] use splice() to send input to CGI * [multiple] ignore openssl 3.0.0 deprecation warns * [mod_openssl] migrate ticket cb to openssl 3.0.0 * [mod_openssl] construct OSSL_PARAM on stack * [mod_openssl] merge ssl_tlsext_ticket_key_cb impls * [multiple] openssl 3.0.0 digest interface migrate * [tests] detect multiple SSL/TLS/crypto providers * [core] sys-crypto-md.h consistent interfaces * [wolfssl] wolfSSL_CTX_set_mode differs from others * [multiple] use NSS crypto if no other crypto avail * [multiple] stat_cache_path_stat() for struct st * [TLS] ignore empty "CipherString" in ssl-conf-cmd * [multiple] remove chunk file.start member * [core] modify use of getrlimit() to not be fatal * [mod_webdav] add missing update to cq accounting * [mod_webdav] update defaults after worker_init * [mod_openssl] use newer openssl 3.0.0 func * [core] config_plugin_value_to_int32() * [core] minimize pause during graceful restart * [mod_deflate] use large mmap chunks to compress * [core] stat_cache_entry reference counting * [core] FILE_CHUNK can hold stat_cache_entry ref * [core] http_chunk_append_file_ref_range() * [multiple] use http_chunk_append_file_ref() * [core] always lseek() with shared fd * [core] silence coverity warnings (false positives) * [core] silence coverity warnings in ls-hpack * [core] silence coverity warnings (another try) * [core] fix fd sharing when splitting file chunk * [mod_mbedtls] quiet unused variable warning * [core] use inline funcs in sys-crypto-md.h * [core] add missing declaration for NSS rand * [core] init NSS lib for basic crypto algorithms * [doc] change mod_compress refs to mod_deflate * [doc] replace bzip2 refs with brotli * [build] remove svnversion from versionstamp rule * [doc] /var/run -> /run * [multiple] test for nss includes * [mod_nss] more nss includes fixes * [mod_webdav] define _NETBSD_SOURCE on NetBSD * [core] silence coverity warnings (another try) * [mod_mbedtls] newer mbedTLS vers support TLSv1.3 * [mod_accesslog] update defaults after cycling log * [multiple] add some missing config cleanup * [core] fix (startup) mem leaks in configparser.y * [core] STAILQ_* -> SIMPLEQ_* on OpenBSD * [mod_wolfssl] use more wolfssl/options.h defines * [mod_wolfssl] cripple SNI if not built OPENSSL_ALL * [mod_wolfssl] need to build --enable-alpn for ALPN * [mod_secdownload] fix compile w/ NSS on FreeBSD * [mod_mbedtls] wrap addtl code in preproc defines * [TLS] server.feature-flags "ssl.session-cache" * [core] workaround fragile code in wolfssl types.h * [core] move misplaced error trace to match option * [core] adjust wolfssl workaround for another case * [multiple] consistent order for crypto lib select * [multiple] include mbedtls/config.h after select * [multiple] include wolfssl/options.h after select * [core] set NSS_VER_INCLUDE after crypto lib select * [core] use system xxhash lib if available * [doc] refresh doc/config/conf.d/mime.conf * [meson] add matching -I for lua lib version * [build] prepend search for lua version 5.4 * [core] use inotify in stat_cache.[ch] on Linux * [build] detect inotify header <sys/inotify.h> * [mod_nss] update session ticket NSS devel comment * [core] set last_used on rd/wr from backend (fixes #3029) * [core] cold func for gw_recv_response error case * [core] use kqueue() instead of FAM/gamin on *BSD * [core] no graceful-restart-bg on OpenBSD, NetBSD * [mod_openssl] add LIBRESSL_VERSION_NUMBER checks * [core] use struct kevent on stack in stat_cache * [core] stat_cache preprocessor paranoia * [mod_openssl] adjust LIBRESSL_VERSION_NUMBER check * [mod_maxminddb] fix config validation typo * [tests] allow LIGHTTPD_EXE_PATH override * [multiple] handle NULL val as empty in *_env_add (fixes #3030) * [core] accept "HTTP/2.0", "HTTP/3.0" from backends (fixes #3031) * [build] check for xxhash in more ways * [core] accept "HTTP/2.0", "HTTP/3.0" from backends (#3031) * [core] http_response_buffer_append_authority() * [core] define SHA*_DIGEST_LENGTH macros if missing * [doc] update optional pkg dependencies in INSTALL * [mod_alias] validate given order, not sorted order * [core] filter out duplicate modules * [mod_cgi] fix crash if initial write to CGI fails * [mod_cgi] ensure tmp file open() before splice() * [multiple] add back-pressure gw data pump (fixes #3033) * [core] fix bug when HTTP/2 frames span chunks * [multiple] more forgiving config str to boolean (fixes #3036) * [core] check for __builtin_expect() availability * [core] quiet more request parse errs unless debug * [core] consolidate chunk size checks * [mod_flv_streaming] use stat_cache_get_entry_open * [mod_webdav] pass full path to webdav_unlinkat() * [mod_webdav] fallbacks if _ATFILE_SOURCE not avail * [mod_fastcgi] move src/fastcgi.h into src/compat/ * [mod_status] add additional HTML-encoding * [core] server.v4mapped option * [mod_webdav] workaround for gvfs dir redir bug - Remove SuSEfirewall2 service files, SuSEfirewall2 does not exist anymore - Changed /etc/logrotate.d/lighttpd from init.d to systemd fix boo#1146452. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15-SP3: zypper in -t patch openSUSE-2022-24=1 Package List: - openSUSE Backports SLE-15-SP3 (aarch64 i586 ppc64le s390x x86_64): lighttpd-1.4.64-bp153.2.3.1 lighttpd-mod_authn_gssapi-1.4.64-bp153.2.3.1 lighttpd-mod_authn_ldap-1.4.64-bp153.2.3.1 lighttpd-mod_authn_pam-1.4.64-bp153.2.3.1 lighttpd-mod_authn_sasl-1.4.64-bp153.2.3.1 lighttpd-mod_magnet-1.4.64-bp153.2.3.1 lighttpd-mod_maxminddb-1.4.64-bp153.2.3.1 lighttpd-mod_rrdtool-1.4.64-bp153.2.3.1 lighttpd-mod_vhostdb_dbi-1.4.64-bp153.2.3.1 lighttpd-mod_vhostdb_ldap-1.4.64-bp153.2.3.1 lighttpd-mod_vhostdb_mysql-1.4.64-bp153.2.3.1 lighttpd-mod_vhostdb_pgsql-1.4.64-bp153.2.3.1 lighttpd-mod_webdav-1.4.64-bp153.2.3.1 References: https://www.suse.com/security/cve/CVE-2022-22707.html https://bugzilla.suse.com/1146452 https://bugzilla.suse.com/1181400 https://bugzilla.suse.com/1194376

1 0

openSUSE-SU-2022:0287-1: critical: Security update for samba
by opensuse-security＠opensuse.org 01 Feb '22

01 Feb '22

openSUSE Security Update: Security update for samba ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0287-1 Rating: critical References: #1194859 Cross-References: CVE-2021-44142 CVSS scores: CVE-2021-44142 (SUSE): 9.9 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for samba fixes the following issues: - CVE-2021-44142: Fixed out-of-Bound Read/Write on Samba vfs_fruit module. (bsc#1194859) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-287=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): libndr0-4.11.14+git.319.91d693db37c-4.35.1 libndr0-debuginfo-4.11.14+git.319.91d693db37c-4.35.1 - openSUSE Leap 15.4 (x86_64): libndr0-32bit-4.11.14+git.319.91d693db37c-4.35.1 libndr0-32bit-debuginfo-4.11.14+git.319.91d693db37c-4.35.1 References: https://www.suse.com/security/cve/CVE-2021-44142.html https://bugzilla.suse.com/1194859

1 0

openSUSE-SU-2022:0277-1: important: Test update for SUSE:SLE-15-SP2:Update (security)
by opensuse-security＠opensuse.org 01 Feb '22

01 Feb '22

openSUSE Security Update: Test update for SUSE:SLE-15-SP2:Update (security) ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0277-1 Rating: important References: #1194507 Affected Products: openSUSE Leap 15.4 openSUSE Leap 15.3 ______________________________________________________________________________ An update that contains security fixes can now be installed. Description: This is a security test update for SUSE:SLE-15-SP2:Update Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-277=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-277=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): update-test-security-5.1-33.2 - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): update-test-security-5.1-33.2 References: https://bugzilla.suse.com/1194507

1 0

openSUSE-SU-2022:0283-1: important: Security update for samba
by opensuse-security＠opensuse.org 01 Feb '22

01 Feb '22

openSUSE Security Update: Security update for samba ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0283-1 Rating: important References: #1139519 #1183572 #1183574 #1188571 #1191227 #1191532 #1192684 #1193690 #1194859 #1195048 SLE-23329 Cross-References: CVE-2020-27840 CVE-2021-20277 CVE-2021-20316 CVE-2021-36222 CVE-2021-43566 CVE-2021-44141 CVE-2021-44142 CVE-2022-0336 CVSS scores: CVE-2020-27840 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2020-27840 (SUSE): 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-20277 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-20277 (SUSE): 7.1 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:H CVE-2021-20316 (SUSE): 5.9 CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:L/I:H/A:N CVE-2021-36222 (NVD) : 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-36222 (SUSE): 7.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-43566 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-44141 (SUSE): 5 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:L/I:N/A:N CVE-2021-44142 (SUSE): 9.9 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H CVE-2022-0336 (SUSE): 8.8 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that solves 8 vulnerabilities, contains one feature and has two fixes is now available. Description: - CVE-2021-44141: Information leak via symlinks of existance of files or directories outside of the exported share; (bso#14911); (bsc#1193690); - CVE-2021-44142: Out-of-bounds heap read/write vulnerability in VFS module vfs_fruit allows code execution; (bso#14914); (bsc#1194859); - CVE-2022-0336: Samba AD users with permission to write to an account can impersonate arbitrary services; (bso#14950); (bsc#1195048); samba was updated to 4.15.4 (jsc#SLE-23329); * Duplicate SMB file_ids leading to Windows client cache poisoning; (bso#14928); * Failed to parse NTLMv2_RESPONSE length 95 - Buffer Size Error - NT_STATUS_BUFFER_TOO_SMALL; (bso#14932); * kill_tcp_connections does not work; (bso#14934); * Can't connect to Windows shares not requiring authentication using KDE/Gnome; (bso#14935); * smbclient -L doesn't set "client max protocol" to NT1 before calling the "Reconnecting with SMB1 for workgroup listing" path; (bso#14939); * Cross device copy of the crossrename module always fails; (bso#14940); * symlinkat function from VFS cap module always fails with an error; (bso#14941); * Fix possible fsp pointer deference; (bso#14942); * Missing pop_sec_ctx() in error path inside close_directory(); (bso#14944); * "smbd --build-options" no longer works without an smb.conf file; (bso#14945); Samba was updated to version 4.15.3 + CVE-2021-43566: Symlink race error can allow directory creation outside of the exported share; (bsc#1139519); + CVE-2021-20316: Symlink race error can allow metadata read and modify outside of the exported share; (bsc#1191227); - Reorganize libs packages. Split samba-libs into samba-client-libs, samba-libs, samba-winbind-libs and samba-ad-dc-libs, merging samba public libraries depending on internal samba libraries into these packages as there were dependency problems everytime one of these public libraries changed its version (bsc#1192684). The devel packages are merged into samba-devel. - Rename package samba-core-devel to samba-devel - Update the symlink create by samba-dsdb-modules to private samba ldb modules following libldb2 changes from /usr/lib64/ldb/samba to /usr/lib64/ldb2/modules/ldb/samba krb5 was updated to 1.16.3 to 1.19.2 * Fix a denial of service attack against the KDC encrypted challenge code; (CVE-2021-36222); * Fix a memory leak when gss_inquire_cred() is called without a credential handle. Changes from 1.19.1: * Fix a linking issue with Samba. * Better support multiple pkinit_identities values by checking whether certificates can be loaded for each value. Changes from 1.19 Administrator experience * When a client keytab is present, the GSSAPI krb5 mech will refresh credentials even if the current credentials were acquired manually. * It is now harder to accidentally delete the K/M entry from a KDB. Developer experience * gss_acquire_cred_from() now supports the "password" and "verify" options, allowing credentials to be acquired via password and verified using a keytab key. * When an application accepts a GSS security context, the new GSS_C_CHANNEL_BOUND_FLAG will be set if the initiator and acceptor both provided matching channel bindings. * Added the GSS_KRB5_NT_X509_CERT name type, allowing S4U2Self requests to identify the desired client principal by certificate. * PKINIT certauth modules can now cause the hw-authent flag to be set in issued tickets. * The krb5_init_creds_step() API will now issue the same password expiration warnings as krb5_get_init_creds_password(). Protocol evolution * Added client and KDC support for Microsoft's Resource-Based Constrained Delegation, which allows cross-realm S4U2Proxy requests. A third-party database module is required for KDC support. * kadmin/admin is now the preferred server principal name for kadmin connections, and the host-based form is no longer created by default. The client will still try the host-based form as a fallback. * Added client and server support for Microsoft's KERB_AP_OPTIONS_CBT extension, which causes channel bindings to be required for the initiator if the acceptor provided them. The client will send this option if the client_aware_gss_bindings profile option is set. User experience * kinit will now issue a warning if the des3-cbc-sha1 encryption type is used in the reply. This encryption type will be deprecated and removed in future releases. * Added kvno flags --out-cache, --no-store, and --cached-only (inspired by Heimdal's kgetcred). Changes from 1.18.3 * Fix a denial of service vulnerability when decoding Kerberos protocol messages. * Fix a locking issue with the LMDB KDB module which could cause KDC and kadmind processes to lose access to the database. * Fix an assertion failure when libgssapi_krb5 is repeatedly loaded and unloaded while libkrb5support remains loaded. Changes from 1.18.2 * Fix a SPNEGO regression where an acceptor using the default credential would improperly filter mechanisms, causing a negotiation failure. * Fix a bug where the KDC would fail to issue tickets if the local krbtgt principal's first key has a single-DES enctype. * Add stub functions to allow old versions of OpenSSL libcrypto to link against libkrb5. * Fix a NegoEx bug where the client name and delegated credential might not be reported. Changes from 1.18.1 * Fix a crash when qualifying short hostnames when the system has no primary DNS domain. * Fix a regression when an application imports "service@" as a GSS host-based name for its acceptor credential handle. * Fix KDC enforcement of auth indicators when they are modified by the KDB module. * Fix removal of require_auth string attributes when the LDAP KDB module is used. * Fix a compile error when building with musl libc on Linux. * Fix a compile error when building with gcc 4.x. * Change the KDC constrained delegation precedence order for consistency with Windows KDCs. Changes from 1.18 Administrator experience: * Remove support for single-DES encryption types. * Change the replay cache format to be more efficient and robust. Replay cache filenames using the new format end with ".rcache2" by default. * setuid programs will automatically ignore environment variables that normally affect krb5 API functions, even if the caller does not use krb5_init_secure_context(). * Add an "enforce_ok_as_delegate" krb5.conf relation to disable credential forwarding during GSSAPI authentication unless the KDC sets the ok-as-delegate bit in the service ticket. * Use the permitted_enctypes krb5.conf setting as the default value for default_tkt_enctypes and default_tgs_enctypes. Developer experience: * Implement krb5_cc_remove_cred() for all credential cache types. * Add the krb5_pac_get_client_info() API to get the client account name from a PAC. Protocol evolution: * Add KDC support for S4U2Self requests where the user is identified by X.509 certificate. (Requires support for certificate lookup from a third-party KDB module.) * Remove support for an old ("draft 9") variant of PKINIT. * Add support for Microsoft NegoEx. (Requires one or more third-party GSS modules implementing NegoEx mechanisms.) User experience: * Add support for "dns_canonicalize_hostname=fallback", causing host-based principal names to be tried first without DNS canonicalization, and again with DNS canonicalization if the un-canonicalized server is not found. * Expand single-component hostnames in host-based principal names when DNS canonicalization is not used, adding the system's first DNS search path as a suffix. Add a "qualify_shortname" krb5.conf relation to override this suffix or disable expansion. * Honor the transited-policy-checked ticket flag on application servers, eliminating the requirement to configure capaths on servers in some scenarios. Code quality: * The libkrb5 serialization code (used to export and import krb5 GSS security contexts) has been simplified and made type-safe. * The libkrb5 code for creating KRB-PRIV, KRB-SAFE, and KRB-CRED messages has been revised to conform to current coding practices. * The test suite has been modified to work with macOS System Integrity Protection enabled. * The test suite incorporates soft-pkcs11 so that PKINIT PKCS11 support can always be tested. Changes from 1.17.1 * Fix a bug preventing "addprinc -randkey -kvno" from working in kadmin. * Fix a bug preventing time skew correction from working when a KCM credential cache is used. Changes from 1.17: Administrator experience: * A new Kerberos database module using the Lightning Memory-Mapped Database library (LMDB) has been added. The LMDB KDB module should be more performant and more robust than the DB2 module, and may become the default module for new databases in a future release. * "kdb5_util dump" will no longer dump policy entries when specific principal names are requested. Developer experience: * The new krb5_get_etype_info() API can be used to retrieve enctype, salt, and string-to-key parameters from the KDC for a client principal. * The new GSS_KRB5_NT_ENTERPRISE_NAME name type allows enterprise principal names to be used with GSS-API functions. * KDC and kadmind modules which call com_err() will now write to the log file in a format more consistent with other log messages. * Programs which use large numbers of memory credential caches should perform better. Protocol evolution: * The SPAKE pre-authentication mechanism is now supported. This mechanism protects against password dictionary attacks without requiring any additional infrastructure such as certificates. SPAKE is enabled by default on clients, but must be manually enabled on the KDC for this release. * PKINIT freshness tokens are now supported. Freshness tokens can protect against scenarios where an attacker uses temporary access to a smart card to generate authentication requests for the future. * Password change operations now prefer TCP over UDP, to avoid spurious error messages about replays when a response packet is dropped. * The KDC now supports cross-realm S4U2Self requests when used with a third-party KDB module such as Samba's. The client code for cross-realm S4U2Self requests is also now more robust. User experience: * The new ktutil addent -f flag can be used to fetch salt information from the KDC for password-based keys. * The new kdestroy -p option can be used to destroy a credential cache within a collection by client principal name. * The Kerberos man page has been restored, and documents the environment variables that affect programs using the Kerberos library. Code quality: * Python test scripts now use Python 3. * Python test scripts now display markers in verbose output, making it easier to find where a failure occurred within the scripts. * The Windows build system has been simplified and updated to work with more recent versions of Visual Studio. A large volume of unused Windows-specific code has been removed. Visual Studio 2013 or later is now required. - Build with full Cyrus SASL support. Negotiating SASL credentials with an EXTERNAL bind mechanism requires interaction. Kerberos provides its own interaction function that skips all interaction, thus preventing the mechanism from working. ldb was updated to version 2.4.1 (jsc#SLE-23329); - Release 2.4.1 + Corrected python behaviour for 'in' for LDAP attributes contained as part of ldb.Message; (bso#14845); + Fix memory handling in ldb.msg_diff; (bso#14836); - Release 2.4.0 + pyldb: Fix Message.items() for a message containing elements + pyldb: Add test for Message.items() + tests: Use ldbsearch '--scope instead of '-s' + Change page size of guidindexpackv1.ldb + Use a 1MiB lmdb so the test also passes on aarch64 CentOS stream + attrib_handler casefold: simplify space dropping + fix ldb_comparison_fold off-by-one overrun + CVE-2020-27840: pytests: move Dn.validate test to ldb + CVE-2020-27840 ldb_dn: avoid head corruption in ldb_dn_explode + CVE-2021-20277 ldb/attrib_handlers casefold: stay in bounds + CVE-2021-20277 ldb tests: ldb_match tests with extra spaces + improve comments for ldb_module_connect_backend() + test/ldb_tdb: correct introductory comments + ldb.h: remove undefined async_ctx function signatures + correct comments in attrib_handers val_to_int64 + dn tests use cmocka print functions + ldb_match: remove redundant check + add tests for ldb_wildcard_compare + ldb_match: trailing chunk must match end of string + pyldb: catch potential overflow error in py_timestring + ldb: remove some 'if PY3's in tests talloc was updated to 2.3.3: + various bugfixes + python: Ensure reference counts are properly incremented + Change pytalloc source to LGPL + Upgrade waf to 2.0.18 to fix a cross-compilation issue; (bso#13846). tdb was updated to version 1.4.4: + various bugfixes tevent was updated to version 0.11.0: + Add custom tag to events + Add event trace api sssd was updated to: - Fix tests test_copy_ccache & test_copy_keytab for later versions of krb5 - Update the private ldb modules installation following libldb2 changes from /usr/lib64/ldb/samba to /usr/lib64/ldb2/modules/ldb/samba apparmor was updated to: - Cater for changes to ldb packaging to allow parallel installation with libldb (bsc#1192684). - add profile for samba-bgqd (bsc#1191532). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-283=1 Package List: - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): apache2-mod_apparmor-2.13.6-150300.3.11.2 apache2-mod_apparmor-debuginfo-2.13.6-150300.3.11.2 apparmor-debugsource-2.13.6-150300.3.11.2 apparmor-parser-2.13.6-150300.3.11.2 apparmor-parser-debuginfo-2.13.6-150300.3.11.2 ctdb-4.15.4+git.324.8332acf1a63-150300.3.25.3 ctdb-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 ctdb-pcp-pmda-4.15.4+git.324.8332acf1a63-150300.3.25.3 ctdb-pcp-pmda-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 krb5-1.19.2-150300.8.3.2 krb5-client-1.19.2-150300.8.3.2 krb5-client-debuginfo-1.19.2-150300.8.3.2 krb5-debuginfo-1.19.2-150300.8.3.2 krb5-debugsource-1.19.2-150300.8.3.2 krb5-devel-1.19.2-150300.8.3.2 krb5-mini-1.19.2-150300.8.3.2 krb5-mini-debuginfo-1.19.2-150300.8.3.2 krb5-mini-debugsource-1.19.2-150300.8.3.2 krb5-mini-devel-1.19.2-150300.8.3.2 krb5-plugin-kdb-ldap-1.19.2-150300.8.3.2 krb5-plugin-kdb-ldap-debuginfo-1.19.2-150300.8.3.2 krb5-plugin-preauth-otp-1.19.2-150300.8.3.2 krb5-plugin-preauth-otp-debuginfo-1.19.2-150300.8.3.2 krb5-plugin-preauth-pkinit-1.19.2-150300.8.3.2 krb5-plugin-preauth-pkinit-debuginfo-1.19.2-150300.8.3.2 krb5-plugin-preauth-spake-1.19.2-150300.8.3.2 krb5-plugin-preauth-spake-debuginfo-1.19.2-150300.8.3.2 krb5-server-1.19.2-150300.8.3.2 krb5-server-debuginfo-1.19.2-150300.8.3.2 ldb-debugsource-2.4.1-150300.3.10.1 ldb-tools-2.4.1-150300.3.10.1 ldb-tools-debuginfo-2.4.1-150300.3.10.1 libapparmor-debugsource-2.13.6-150300.3.11.1 libapparmor-devel-2.13.6-150300.3.11.1 libapparmor1-2.13.6-150300.3.11.1 libapparmor1-debuginfo-2.13.6-150300.3.11.1 libipa_hbac-devel-1.16.1-150300.23.17.3 libipa_hbac0-1.16.1-150300.23.17.3 libipa_hbac0-debuginfo-1.16.1-150300.23.17.3 libldb-devel-2.4.1-150300.3.10.1 libldb2-2.4.1-150300.3.10.1 libldb2-debuginfo-2.4.1-150300.3.10.1 libnfsidmap-sss-1.16.1-150300.23.17.3 libnfsidmap-sss-debuginfo-1.16.1-150300.23.17.3 libsamba-policy-devel-4.15.4+git.324.8332acf1a63-150300.3.25.3 libsamba-policy-python3-devel-4.15.4+git.324.8332acf1a63-150300.3.25.3 libsamba-policy0-python3-4.15.4+git.324.8332acf1a63-150300.3.25.3 libsamba-policy0-python3-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 libsss_certmap-devel-1.16.1-150300.23.17.3 libsss_certmap0-1.16.1-150300.23.17.3 libsss_certmap0-debuginfo-1.16.1-150300.23.17.3 libsss_idmap-devel-1.16.1-150300.23.17.3 libsss_idmap0-1.16.1-150300.23.17.3 libsss_idmap0-debuginfo-1.16.1-150300.23.17.3 libsss_nss_idmap-devel-1.16.1-150300.23.17.3 libsss_nss_idmap0-1.16.1-150300.23.17.3 libsss_nss_idmap0-debuginfo-1.16.1-150300.23.17.3 libsss_simpleifp-devel-1.16.1-150300.23.17.3 libsss_simpleifp0-1.16.1-150300.23.17.3 libsss_simpleifp0-debuginfo-1.16.1-150300.23.17.3 libtalloc-devel-2.3.3-150300.3.3.2 libtalloc2-2.3.3-150300.3.3.2 libtalloc2-debuginfo-2.3.3-150300.3.3.2 libtdb-devel-1.4.4-150300.3.3.2 libtdb1-1.4.4-150300.3.3.2 libtdb1-debuginfo-1.4.4-150300.3.3.2 libtevent-devel-0.11.0-150300.3.3.2 libtevent0-0.11.0-150300.3.3.2 libtevent0-debuginfo-0.11.0-150300.3.3.2 pam_apparmor-2.13.6-150300.3.11.2 pam_apparmor-debuginfo-2.13.6-150300.3.11.2 perl-apparmor-2.13.6-150300.3.11.2 perl-apparmor-debuginfo-2.13.6-150300.3.11.2 python3-apparmor-2.13.6-150300.3.11.2 python3-apparmor-debuginfo-2.13.6-150300.3.11.2 python3-ipa_hbac-1.16.1-150300.23.17.3 python3-ipa_hbac-debuginfo-1.16.1-150300.23.17.3 python3-ldb-2.4.1-150300.3.10.1 python3-ldb-debuginfo-2.4.1-150300.3.10.1 python3-ldb-devel-2.4.1-150300.3.10.1 python3-sss-murmur-1.16.1-150300.23.17.3 python3-sss-murmur-debuginfo-1.16.1-150300.23.17.3 python3-sss_nss_idmap-1.16.1-150300.23.17.3 python3-sss_nss_idmap-debuginfo-1.16.1-150300.23.17.3 python3-sssd-config-1.16.1-150300.23.17.3 python3-sssd-config-debuginfo-1.16.1-150300.23.17.3 python3-talloc-2.3.3-150300.3.3.2 python3-talloc-debuginfo-2.3.3-150300.3.3.2 python3-talloc-devel-2.3.3-150300.3.3.2 python3-tdb-1.4.4-150300.3.3.2 python3-tdb-debuginfo-1.4.4-150300.3.3.2 python3-tevent-0.11.0-150300.3.3.2 python3-tevent-debuginfo-0.11.0-150300.3.3.2 ruby-apparmor-2.13.6-150300.3.11.2 ruby-apparmor-debuginfo-2.13.6-150300.3.11.2 samba-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-ad-dc-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-ad-dc-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-ad-dc-libs-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-ad-dc-libs-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-libs-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-libs-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-debugsource-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-devel-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-dsdb-modules-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-dsdb-modules-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-gpupdate-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-ldb-ldap-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-ldb-ldap-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-python3-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-python3-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-python3-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-python3-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-test-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-test-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-tool-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-winbind-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-winbind-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-winbind-libs-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-winbind-libs-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 sssd-1.16.1-150300.23.17.3 sssd-ad-1.16.1-150300.23.17.3 sssd-ad-debuginfo-1.16.1-150300.23.17.3 sssd-common-1.16.1-150300.23.17.3 sssd-common-debuginfo-1.16.1-150300.23.17.3 sssd-dbus-1.16.1-150300.23.17.3 sssd-dbus-debuginfo-1.16.1-150300.23.17.3 sssd-debugsource-1.16.1-150300.23.17.3 sssd-ipa-1.16.1-150300.23.17.3 sssd-ipa-debuginfo-1.16.1-150300.23.17.3 sssd-krb5-1.16.1-150300.23.17.3 sssd-krb5-common-1.16.1-150300.23.17.3 sssd-krb5-common-debuginfo-1.16.1-150300.23.17.3 sssd-krb5-debuginfo-1.16.1-150300.23.17.3 sssd-ldap-1.16.1-150300.23.17.3 sssd-ldap-debuginfo-1.16.1-150300.23.17.3 sssd-proxy-1.16.1-150300.23.17.3 sssd-proxy-debuginfo-1.16.1-150300.23.17.3 sssd-tools-1.16.1-150300.23.17.3 sssd-tools-debuginfo-1.16.1-150300.23.17.3 sssd-wbclient-1.16.1-150300.23.17.3 sssd-wbclient-debuginfo-1.16.1-150300.23.17.3 sssd-wbclient-devel-1.16.1-150300.23.17.3 sssd-winbind-idmap-1.16.1-150300.23.17.3 sssd-winbind-idmap-debuginfo-1.16.1-150300.23.17.3 talloc-debugsource-2.3.3-150300.3.3.2 talloc-man-2.3.3-150300.3.3.1 tdb-debugsource-1.4.4-150300.3.3.2 tdb-tools-1.4.4-150300.3.3.2 tdb-tools-debuginfo-1.4.4-150300.3.3.2 tevent-debugsource-0.11.0-150300.3.3.2 tevent-man-0.11.0-150300.3.3.1 - openSUSE Leap 15.3 (aarch64 x86_64): samba-ceph-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-ceph-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 - openSUSE Leap 15.3 (aarch64_ilp32): libsamba-policy0-python3-64bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 libsamba-policy0-python3-64bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-64bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-64bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-64bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-64bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-python3-64bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-python3-64bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 - openSUSE Leap 15.3 (noarch): apparmor-abstractions-2.13.6-150300.3.11.2 apparmor-docs-2.13.6-150300.3.11.2 apparmor-parser-lang-2.13.6-150300.3.11.2 apparmor-profiles-2.13.6-150300.3.11.2 apparmor-utils-2.13.6-150300.3.11.2 apparmor-utils-lang-2.13.6-150300.3.11.2 samba-doc-4.15.4+git.324.8332acf1a63-150300.3.25.3 - openSUSE Leap 15.3 (x86_64): krb5-32bit-1.19.2-150300.8.3.2 krb5-32bit-debuginfo-1.19.2-150300.8.3.2 krb5-devel-32bit-1.19.2-150300.8.3.2 libapparmor1-32bit-2.13.6-150300.3.11.1 libapparmor1-32bit-debuginfo-2.13.6-150300.3.11.1 libldb2-32bit-2.4.1-150300.3.10.1 libldb2-32bit-debuginfo-2.4.1-150300.3.10.1 libsamba-policy0-python3-32bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 libsamba-policy0-python3-32bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 libtalloc2-32bit-2.3.3-150300.3.3.2 libtalloc2-32bit-debuginfo-2.3.3-150300.3.3.2 libtdb1-32bit-1.4.4-150300.3.3.2 libtdb1-32bit-debuginfo-1.4.4-150300.3.3.2 libtevent0-32bit-0.11.0-150300.3.3.2 libtevent0-32bit-debuginfo-0.11.0-150300.3.3.2 pam_apparmor-32bit-2.13.6-150300.3.11.2 pam_apparmor-32bit-debuginfo-2.13.6-150300.3.11.2 python3-ldb-32bit-2.4.1-150300.3.10.1 python3-ldb-32bit-debuginfo-2.4.1-150300.3.10.1 python3-talloc-32bit-2.3.3-150300.3.3.2 python3-talloc-32bit-debuginfo-2.3.3-150300.3.3.2 python3-tdb-32bit-1.4.4-150300.3.3.2 python3-tdb-32bit-debuginfo-1.4.4-150300.3.3.2 python3-tevent-32bit-0.11.0-150300.3.3.2 python3-tevent-32bit-debuginfo-0.11.0-150300.3.3.2 samba-ad-dc-libs-32bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-ad-dc-libs-32bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-32bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-32bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-libs-32bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-client-libs-32bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-devel-32bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-32bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-32bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-python3-32bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-libs-python3-32bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-winbind-libs-32bit-4.15.4+git.324.8332acf1a63-150300.3.25.3 samba-winbind-libs-32bit-debuginfo-4.15.4+git.324.8332acf1a63-150300.3.25.3 References: https://www.suse.com/security/cve/CVE-2020-27840.html https://www.suse.com/security/cve/CVE-2021-20277.html https://www.suse.com/security/cve/CVE-2021-20316.html https://www.suse.com/security/cve/CVE-2021-36222.html https://www.suse.com/security/cve/CVE-2021-43566.html https://www.suse.com/security/cve/CVE-2021-44141.html https://www.suse.com/security/cve/CVE-2021-44142.html https://www.suse.com/security/cve/CVE-2022-0336.html https://bugzilla.suse.com/1139519 https://bugzilla.suse.com/1183572 https://bugzilla.suse.com/1183574 https://bugzilla.suse.com/1188571 https://bugzilla.suse.com/1191227 https://bugzilla.suse.com/1191532 https://bugzilla.suse.com/1192684 https://bugzilla.suse.com/1193690 https://bugzilla.suse.com/1194859 https://bugzilla.suse.com/1195048

1 0

openSUSE-SU-2022:0284-1: critical: Security update for samba
by opensuse-security＠opensuse.org 01 Feb '22

01 Feb '22

openSUSE Security Update: Security update for samba ______________________________________________________________________________ Announcement ID: openSUSE-SU-2022:0284-1 Rating: critical References: #1194859 Cross-References: CVE-2021-44142 CVSS scores: CVE-2021-44142 (SUSE): 9.9 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H Affected Products: openSUSE Leap 15.4 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for samba fixes the following issues: - CVE-2021-44142: Fixed out-of-Bound Read/Write on Samba vfs_fruit module. (bsc#1194859) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-284=1 Package List: - openSUSE Leap 15.4 (aarch64 ppc64le s390x x86_64): libsamba-policy-python-devel-4.9.5+git.483.212a7ebca6b-3.64.1 libsamba-policy0-4.9.5+git.483.212a7ebca6b-3.64.1 libsamba-policy0-debuginfo-4.9.5+git.483.212a7ebca6b-3.64.1 samba-libs-python-4.9.5+git.483.212a7ebca6b-3.64.1 samba-libs-python-debuginfo-4.9.5+git.483.212a7ebca6b-3.64.1 samba-python-4.9.5+git.483.212a7ebca6b-3.64.1 samba-python-debuginfo-4.9.5+git.483.212a7ebca6b-3.64.1 - openSUSE Leap 15.4 (x86_64): libsamba-policy0-32bit-4.9.5+git.483.212a7ebca6b-3.64.1 libsamba-policy0-32bit-debuginfo-4.9.5+git.483.212a7ebca6b-3.64.1 samba-libs-python-32bit-4.9.5+git.483.212a7ebca6b-3.64.1 samba-libs-python-32bit-debuginfo-4.9.5+git.483.212a7ebca6b-3.64.1 References: https://www.suse.com/security/cve/CVE-2021-44142.html https://bugzilla.suse.com/1194859

1 0