Re: [radeonhd] 0x791E:0x1043:0x8287: ATI Radeon 1250

R.M. Thomas

2 Jun 2008 2 Jun '08

00:39

Dave's post was indeed helpful. But first I must clarify something which did not appear in my original message (Saturday). I attached there a copy of the shell script which I wrote to carry out the build. This script did not appear in the archive, and as a result an important piece of information was not visible to readers. At the top of the script I had put the comment: # # REMARK: # It was necessary to remove file # /usr/include/xorg/xf86_ansic.h # in order to avoid a runtime error "undefined symbol xf86stat". # At the time I thought (on the basis of some googling) that xf86_ansic.h was an obsolete relic (awaiting de-ansification), and because its removal gave no error messages during the build and allowed the x-server to at least start I did not worry too much about discarding it. Bad move. Having seen Dave's post I did some instrumenting of routine drmOpenDevice() in file xf86drm.c myself. I always got zero for the structure members st.st_dev and st.st_rdev and inconsistent values for dev. I conclude that there is something seriously wrong with the definition of dev_t in my build. I haven't tried to find where the definition is located; all I really know is that sizeof(dev_t) is 8. Although it seems that removal of xf86_ansic.h wrecks the build, I have just as much trouble if I retain xf86_ansic.h. In the latter case the build again gives no error messages, but at runtime I get a black screen when starting X and messages in Xorg.0.log about not finding any fonts. This is my first build using git and I guess I am trying to do too much at once. Mike -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

Show replies by date

Matthias Hopf

2 Jun 2 Jun

14:28

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

On Jun 02, 08 01:39:41 +0100, R.M. Thomas wrote:

...

Although it seems that removal of xf86_ansic.h wrecks the build, I have just as much trouble if I retain xf86_ansic.h. In the latter case the build again gives no error messages, but at runtime I get a black screen when starting X and messages in Xorg.0.log about not finding any fonts.

There was a bug in git about xf86_ansic.h, but that should have been fixed in the meantime. You can also remove xf86_ansic.h, but you have to configure again after that. It might also be that you'd rather have to specify that during configuring and building of the Xserver, but I'm not 100% sure about that. Matthias -- Matthias Hopf __ __ __ Maxfeldstr. 5 / 90409 Nuernberg (_ | | (_ |__ mat@mshopf.de Phone +49-911-74053-715 __) |_| __) |__ R & D www.mshopf.de -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

Matthias Hopf

3 Jun 3 Jun

10:09

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

On Jun 02, 08 01:39:41 +0100, R.M. Thomas wrote:

...

# REMARK: # It was necessary to remove file # /usr/include/xorg/xf86_ansic.h # in order to avoid a runtime error "undefined symbol xf86stat".

At the time I thought (on the basis of some googling) that xf86_ansic.h was an obsolete relic (awaiting de-ansification), and because its removal gave no error messages during the build and allowed the x-server to at least start I did not worry too much about discarding it. Bad move.

I could imagine that your xf86_ansic.h is a left-over from an old installation (where this was still installed by default). Check the dates of the files. Maybe you find some additional ones that shouldn't be here.

...

Having seen Dave's post I did some instrumenting of routine drmOpenDevice() in file xf86drm.c myself. I always got zero for the structure members st.st_dev and st.st_rdev and inconsistent values for dev. I conclude that there is something seriously wrong with the definition of dev_t in my build. I haven't tried to find where the definition is located; all I really know is that sizeof(dev_t) is 8.

/usr/include/xorg/xf86_libc.h:typedef unsigned long xf86dev_t; /usr/include/bits/typesizes.h:#define __DEV_T_TYPE __UQUAD_TYPE /usr/include/bits/types.h:# define __UQUAD_TYPE __u_quad_t (32) # define __UQUAD_TYPE unsigned long (64) Looks similar. 8 bytes is normal, verified here. When you printed the structure elements, did you cast to int, or did you use %lld (32bit) or %ld (64bit)? %d isn't enough with uncast dev_t.

...

Although it seems that removal of xf86_ansic.h wrecks the build, I have just as much trouble if I retain xf86_ansic.h. In the latter case the build again gives no error messages, but at runtime I get a black screen when starting X and messages in Xorg.0.log about not finding any fonts.

Maybe you should try building + installing everything with a different --prefix (/usr/local or /opt/xorg_git or something like that). The wiki page describes what you need to do, though not really in detail. Matthias -- Matthias Hopf __ __ __ Maxfeldstr. 5 / 90409 Nuernberg (_ | | (_ |__ mat@mshopf.de Phone +49-911-74053-715 __) |_| __) |__ R & D www.mshopf.de -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

R.M. Thomas

5 Jun 5 Jun

00:59

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

Some progress but no success yet.

...

Maybe you should try building + installing everything with a different --prefix (/usr/local or /opt/xorg_git or something like that). The wiki page describes what you need to do, though not really in detail.

I have done a completely fresh build after removing the stale headers related to X in /usr/include. I used the prefix /opt/xorg_git and downloaded the minimum needed to meet dependencies. The build completed without error messages. From the character-based console in Ubuntu's "recovery mode" I set "LD_LIBRARY_PATH=/opt/xorg_git/lib" and then ran "startx -- /opt/xorg_git/bin/Xorg". I got a sensible display (xterm under fvwm as specified in .xinitrc) but this display would not accept any input from keyboard or mouse. I could, however, drop back to the character-based console with Ctrl-F1 as usual. The file /opt/xorg_git/var/log/Xorg.0.log showed no errors. In particular, my weekend problem with opening /dev/dri/card0 seems to have gone away. I attach for your information: (1) The shell script I used to carry out the latest build. (2) Xorg.0.log (3) xorg.conf I'm a novice at this X business and appreciate all comments and advice. Mike ASUS P2-M2A690G, AMD Athlon64 X2 4800+, Ubuntu Hardy 32-bit, ATI Radeon 1250 ************** SCRIPT FOLLOWS ************** #!/bin/sh #------------------------------------------------------------------ # # gitradeonhd.sh # # Made by Mike Thomas # on the basis of a limited understanding of # http://www.x.org/wiki/radeonhd:DRI # http://www.x.org/wiki/Development/git # #------------------------------------------------------------------ STR1="/home/rmthomas/h1" STR2="/home/rmthomas/h2" SRC="/var/tmp/radeonhd-dri" PREFIX="/opt/xorg_git" LIB="lib" export PKG_CONFIG_PATH=$PREFIX/$LIB/pkgconfig export LD_LIBRARY=$PREFIX/$LIB export PATH=$PREFIX/bin:$PATH if [ ! -d $SRC ]; then mkdir $SRC; fi cd $SRC #------------------------------------------------------------------ # Mentioned in http://www.x.org/wiki/radeonhd:DRI #------------------------------------------------------------------ git clone git://anongit.freedesktop.org/git/xorg/util/macros git clone git://anongit.freedesktop.org/git/mesa/drm git clone git://anongit.freedesktop.org/git/mesa/mesa git clone git://anongit.freedesktop.org/git/xorg/xserver git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-video-radeonhd wget ftp://ftp.freedesktop.org/pub/individual/proto/dri2proto-1.1.tar.bz2 -a wget.log wget ftp://ftp.freedesktop.org/pub/individual/proto/xextproto-7.0.3.tar.bz2 -a wget.log wget ftp://ftp.freedesktop.org/pub/individual/proto/xproto-7.0.13.tar.bz2 -a wget.log wget ftp://ftp.freedesktop.org/pub/individual/lib/pixman-0.10.0.tar.bz2 -a wget.log git clone git://anongit.freedesktop.org/git/xorg/proto/inputproto git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-input-mouse git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-input-keyboard git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-input-evdev #------------------------------------------------------------------ # Extras apparently needed to resolve dependencies (on my machine) #------------------------------------------------------------------ git clone git://anongit.freedesktop.org/git/xorg/proto/glproto git clone git://anongit.freedesktop.org/git/xorg/lib/libpciaccess #------------------------------------------------------------------ # For no good reason, just an experiment #------------------------------------------------------------------ git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-video-vesa #------------------------------------------------------------------ bunzip2 dri2proto-1.1.tar.bz2 && tar xvf dri2proto-1.1.tar bunzip2 xextproto-7.0.3.tar.bz2 && tar xvf xextproto-7.0.3.tar bunzip2 xproto-7.0.13.tar.bz2 && tar xvf xproto-7.0.13.tar bunzip2 pixman-0.10.0.tar.bz2 && tar xvf pixman-0.10.0.tar #------------------------------------------------------------------ # Build starts here #------------------------------------------------------------------

...

$STR1 $STR2

cd $SRC/macros ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 export ACLOCAL="aclocal -I $PREFIX/share/aclocal" cd $SRC/drm ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd linux-core make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 depmod -a cd $SRC/glproto ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/libpciaccess ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/dri2proto-1.1 ./configure --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/mesa ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 mkdir -p /opt/xorg_git/bin install -m755 progs/xdemos/glxinfo /opt/xorg_git/bin/ 1>>$STR1 2>>$STR2 install -m755 progs/xdemos/glxgears /opt/xorg_git/bin/ 1>>$STR1 2>>$STR2 cd $SRC/xextproto-7.0.3 ./configure --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/xproto-7.0.13 ./configure --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/inputproto ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/pixman-0.10.0 ./configure --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/xserver ./autogen.sh --prefix=$PREFIX --enable-builtin-fonts \ --with-xkb-path=/usr/share/X11/xkb 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/xf86-input-mouse ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/xf86-input-keyboard ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $PREFIX/bin ln -s /usr/bin/xkbcomp xkbcomp cd $SRC/xf86-input-evdev ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $SRC/xf86-video-radeonhd ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 depmod -a cd $SRC/xf86-video-vesa ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 #------------------------------------------------------------------ # Run new setup following http://www.x.org/wiki/Development/git #------------------------------------------------------------------ rmmod radeon rmmod drm insmod $SRC/drm/linux-core/drm.ko insmod $SRC/drm/linux-core/radeon.ko export LD_LIBRARY_PATH=$PREFIX/lib startx -- $PREFIX/bin/Xorg -verbose #------------------------------------------------------------------ exit 0 #ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ ****************** Xorg.0.log FOLLOWS ****************** This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.5.99.1 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-17-generic i686 Current Operating System: Linux P2-M2A690G 2.6.24-17-generic #1 SMP Thu May 1 14:31:33 UTC 2008 i686 Build Date: 04 June 2008 11:39:42PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/opt/xorg_git/var/log/Xorg.0.log", Time: Wed Jun 4 23:53:18 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (==) Automatically adding devices (==) Automatically enabling devices (==) Including the default font path built-ins. (**) FontPath set to: /usr/share/fonts/X11/Type1/, /usr/share/fonts/X11/misc/, /usr/share/fonts/X11/100dpi/, /usr/share/fonts/X11/75dpi/, built-ins (**) ModulePath set to "/opt/xorg_git/lib/xorg/modules/,/opt/xorg_git/lib/xorg/modules/input/,/opt/xorg_git/lib/xorg/modules/drivers/,/opt/xorg_git/lib/xorg/modules/fonts/,/opt/xorg_git/lib/xorg/modules/extensions/,/opt/xorg_git/lib/xorg/modules/linux/,/opt/xorg_git/lib/xorg/modules/linux/,/opt/xorg_git/lib/xorg/modules/multimedia/" (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x81dadc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 4.0 X.Org XInput driver : 3.0 X.Org Server Extension : 1.0 X.Org Font Renderer : 0.5 (II) Loader running on linux (--) using VT number 2 (--) PCI:*(0@1:5:0) unknown vendor (0x1002) unknown chipset (0x791e) rev 0, Mem @ 0xf0000000/0, 0xfe9f0000/0, 0xfe800000/0, I/O @ 0x0000d000/0 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /opt/xorg_git/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.0 (II) Loading extension SHAPE (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /opt/xorg_git/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /opt/xorg_git/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.0 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /opt/xorg_git/lib/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.99.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "dri" (II) Loading /opt/xorg_git/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /opt/xorg_git/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.0 (II) Loading extension DRI2 (II) LoadModule: "radeonhd" (II) Loading /opt/xorg_git/lib/xorg/modules/drivers//radeonhd_drv.so (II) Module radeonhd: vendor="AMD GPG" compiled for 1.5.99.1, module version = 1.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.0 (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices: RV505 : Radeon X1550, X1550 64bit. RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350. RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250. R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350. RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200. RV535 : Radeon X1300, X1650. RV550 : Radeon X2300 HD. RV560 : Radeon X1650. RV570 : Radeon X1950, X1950 GT; FireGL V7400. R580 : Radeon X1900, X1950; AMD Stream Processor. R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650. RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000. RV620 : Radeon HD 3450, HD 3470. RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630; FireGL V3600/V5600. RV635 : Radeon HD 3650, HD 3670. RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170. R680 : Radeon HD 3870 X2. M52 : Mobility Radeon X1300. M54 : Mobility Radeon X1400; M54-GL. M56 : Mobility Radeon X1600; Mobility FireGL V5200. M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200. M62 : Mobility Radeon X1350. M64 : Mobility Radeon X1450, X2300. M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250. M68 : Mobility Radeon X1900. M71 : Mobility Radeon HD 2300. M72 : Mobility Radeon HD 2400; Radeon E2400. M74 : Mobility Radeon HD 2400 XT. M76 : Mobility Radeon HD 2600; (Gemini ATI) Mobility Radeon HD 2600 XT. M82 : Mobility Radeon HD 3400. RS600 : Radeon Xpress 1200, Xpress 1250. RS690 : Radeon X1200, X1250, X1270. RS780 : Radeon HD 3200 Series. (II) RADEONHD: version 1.2.1, built from git branch master, commit 26ccf117 (II) Primary Device is: PCI 01@00:05:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) RADEONHD(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Option "DRI" (**) RADEONHD(0): Selected XAA 2D acceleration. (II) RADEONHD(0): Unknown card detected: 0x791E:0x1043:0x8287. If - and only if - your card does not work or does not work optimally please contact radeonhd@opensuse.org to help rectify this. Use the subject: 0x791E:0x1043:0x8287: <name of board> and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an RS690 on an unidentified card (II) RADEONHD(0): Mapped IO at 0xb7a12000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x791e IOBaseAddress: 0xd000 Filename: M2R68L_4.bin BIOS Bootup Message: ATI Radeon Xpress ?1250? for M2R68L (II) RADEONHD(0): Analog TV Default Mode: 1 (II) RADEONHD(0): Found default TV Mode NTSC (--) RADEONHD(0): VideoRAM: 131072 kByte (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000 (II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb000 (II) RADEONHD(0): Default Engine Clock: 400000 (II) RADEONHD(0): Default Memory Clock: 200000 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 14320 (II) RADEONHD(0): Found libdri 5.4.0. drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:05.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 (II) RADEONHD(0): Found libdrm 1.3.0. (II) RADEONHD(0): Found radeon drm 1.29.0. (WW) RADEONHD(0): Disabled 2D acceleration because DRI is enabled (not implemented yet). (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) RADEONHD(0): Default Engine Clock: 400000 (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 14320 (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000) (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000) (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_DVI_SINGLE, "HDMI Type A DFP3", RHD_DDC_1, RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } } (--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1 (--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-D 1 (II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output TMDS B (II) RADEONHD(0): Output VGA_1 using monitor section Configured Monitor (II) RADEONHD(0): Output DVI-D_1 has no monitor section (II) RADEONHD(0): DAC A: Sensed Output: VGA (II) RADEONHD(0): I2C device "RHD I2C line 0:E-EDID segment register" registered at address 0x60. (II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94 (II) RADEONHD(0): EDID data for DELL D1626HT (II) RADEONHD(0): Manufacturer: DEL Model: 515b Serial#: 810430549 (II) RADEONHD(0): Year: 1999 Week: 21 (II) RADEONHD(0): EDID Version: 1.1 (II) RADEONHD(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) RADEONHD(0): Sync: Separate Composite SyncOnGreen (II) RADEONHD(0): Max Image Size [cm]: horiz.: 38 vert.: 29 (II) RADEONHD(0): Gamma: 2.50 (II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) RADEONHD(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595 (II) RADEONHD(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298 (II) RADEONHD(0): Supported VESA Video Modes: (II) RADEONHD(0): 720x400@70Hz (II) RADEONHD(0): 640x480@60Hz (II) RADEONHD(0): 640x480@75Hz (II) RADEONHD(0): 800x600@60Hz (II) RADEONHD(0): 800x600@75Hz (II) RADEONHD(0): 1024x768@60Hz (II) RADEONHD(0): 1024x768@75Hz (II) RADEONHD(0): 1280x1024@75Hz (II) RADEONHD(0): Manufacturer's mask: 0 (II) RADEONHD(0): Supported Future Video Modes: (II) RADEONHD(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) RADEONHD(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) RADEONHD(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) RADEONHD(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) RADEONHD(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) RADEONHD(0): #5: hsize: 1600 vsize 1200 refresh: 85 vid: 22953 (II) RADEONHD(0): Supported additional Video Mode: (II) RADEONHD(0): clock: 28.3 MHz Image Size: 388 x 291 mm (II) RADEONHD(0): h_active: 720 h_sync: 738 h_sync_end 846 h_blank_end 900 h_border: 0 (II) RADEONHD(0): v_active: 350 v_sync: 388 v_sync_end 390 v_blanking: 449 v_border: 0 (II) RADEONHD(0): Serial No: 55348B0N0U59 (II) RADEONHD(0): Monitor name: DELL D1626HT (II) RADEONHD(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 107 kHz, (II) RADEONHD(0): EDID (in hex): (II) RADEONHD(0): 00ffffffffffff0010ac5b5155304e30 (II) RADEONHD(0): 150901010e261d96e80dc9a057479827 (II) RADEONHD(0): 12484ca54b003159455961598199a94f (II) RADEONHD(0): a95901010101100bd0b4205e6310126c (II) RADEONHD(0): 620884231100001a000000ff00353533 (II) RADEONHD(0): 343842304e305535390a000000fc0044 (II) RADEONHD(0): 454c4c20443136323648540a000000fd (II) RADEONHD(0): 0032a01e6bff000a2020202020200023 (II) RADEONHD(0): EDID vendor "DEL", prod id 20827 (II) RADEONHD(0): Using EDID range info for horizontal sync (II) RADEONHD(0): Using EDID range info for vertical refresh (II) RADEONHD(0): Printing DDC gathered Modelines: (II) RADEONHD(0): Modeline "720x350"x0.0 28.32 720 738 846 900 350 388 390 449 +hsync -vsync (31.5 kHz) (II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) RADEONHD(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) RADEONHD(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) RADEONHD(0): Modeline "640x480"x85.0 35.71 640 672 736 832 480 481 484 505 -hsync +vsync (42.9 kHz) (II) RADEONHD(0): Modeline "800x600"x85.0 56.55 800 840 928 1056 600 601 604 630 -hsync +vsync (53.5 kHz) (II) RADEONHD(0): Modeline "1024x768"x85.0 94.39 1024 1088 1200 1376 768 769 772 807 -hsync +vsync (68.6 kHz) (II) RADEONHD(0): Modeline "1280x1024"x85.0 159.36 1280 1376 1512 1744 1024 1025 1028 1075 -hsync +vsync (91.4 kHz) (II) RADEONHD(0): Modeline "1600x1200"x75.0 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -hsync +vsync (94.0 kHz) (II) RADEONHD(0): Modeline "1600x1200"x85.0 234.76 1600 1720 1896 2192 1200 1201 1204 1260 -hsync +vsync (107.1 kHz) (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): Output VGA_1 connected (II) RADEONHD(0): Output DVI-D_1 disconnected (II) RADEONHD(0): Using sloppy heuristic for initial modes (II) RADEONHD(0): Output VGA_1 using initial mode 1400x1050 (II) RADEONHD(0): RandR 1.2 support enabled (==) RADEONHD(0): RGB weight 888 (==) RADEONHD(0): Default visual is TrueColor (==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0) (II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch (II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000) (**) RADEONHD(0): Display dimensions: (380, 290) mm (**) RADEONHD(0): DPI set to (128, 168) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /opt/xorg_git/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x00E18000 (size = 0x00E10000) (II) RADEONHD(0): FB: Allocated DRI Depth Buffer at offset 0x01C28000 (size = 0x00E10000) (II) RADEONHD(0): FB: Allocated DRI Textures at offset 0x02A38000 (size = 0x05400000) (II) RADEONHD(0): Using 16 MB GART aperture (II) RADEONHD(0): Using 2 MB for the ring buffer (II) RADEONHD(0): Using 2 MB for vertex/indirect buffers (II) RADEONHD(0): Using 12 MB for GART textures (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) RADEONHD(0): Mapped IO at 0xb7a12000 (size 0x00010000) (==) RADEONHD(0): Write-combining range (0x38000000,0x8000000) (II) RADEONHD(0): Mapped FB at 0xaf9f3000 (size 0x08000000) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:05.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) RADEONHD(0): [drm] Using the DRM lock SAREA also for drawables. (II) RADEONHD(0): [drm] framebuffer handle = 0xf0000000 (II) RADEONHD(0): [drm] added 1 reserved context for kernel (II) RADEONHD(0): X context handle = 0x1 (II) RADEONHD(0): [drm] installed DRM signal handler (II) RADEONHD(0): [pci] 16384 kB allocated with handle 0xf9373000 (II) RADEONHD(0): [pci] ring handle = 0xf9373000 (II) RADEONHD(0): [pci] Ring mapped at 0xaf7af000 (II) RADEONHD(0): [pci] Ring contents 0x00000000 (II) RADEONHD(0): [pci] ring read ptr handle = 0xf9574000 (II) RADEONHD(0): [pci] Ring read ptr mapped at 0xaf7ae000 (II) RADEONHD(0): [pci] Ring read ptr contents 0x00000000 (II) RADEONHD(0): [pci] vertex/indirect buffers handle = 0xf9575000 (II) RADEONHD(0): [pci] Vertex/indirect buffers mapped at 0xaf5ae000 (II) RADEONHD(0): [pci] Vertex/indirect buffers contents 0x00000000 (II) RADEONHD(0): [pci] GART texture map handle = 0xf9775000 (II) RADEONHD(0): [pci] GART Texture map mapped at 0xae9ee000 (II) RADEONHD(0): [drm] register handle = 0xfe9f0000 (II) RADEONHD(0): [dri] Visual configs initialized (II) RADEONHD(0): [DRI] installation complete (II) RADEONHD(0): [drm] Added 32 65536 byte vertex/indirect buffers (II) RADEONHD(0): [drm] Mapped 32 vertex/indirect buffers (II) RADEONHD(0): [drm] dma control initialized, using IRQ 18 (II) RADEONHD(0): [drm] Initialized kernel GART heap manager, 12320768 (II) RADEONHD(0): Direct rendering enabled (==) RADEONHD(0): Backing store disabled (==) RADEONHD(0): Silken mouse enabled (II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) RADEONHD(0): On Crtc 0 Setting 74.8 Hz Mode: Modeline "1400x1050" 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (II) RADEONHD(0): Calling EnableScaler (II) RADEONHD(0): EnableScaler Successful (II) RADEONHD(0): Using HW cursor (II) RADEONHD(0): DPMS enabled (--) RandR disabled (II) Setting vga for screen 0. (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:05.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /opt/xorg_git/lib/dri/r300_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) RADEONHD(0): Setting screen physical size to 388 x 291 [dix] Could not init font path element /usr/share/fonts/X11/Type1/, removing from list! [dix] Could not init font path element /usr/share/fonts/X11/misc/, removing from list! [dix] Could not init font path element /usr/share/fonts/X11/100dpi/, removing from list! [dix] Could not init font path element /usr/share/fonts/X11/75dpi/, removing from list! (II) AIGLX: Suspending AIGLX clients for VT switch ***************** xorg.conf FOLLOWS ***************** # xorg.conf #-------------------------------------------------------------------- Section "Files" FontPath "/usr/share/fonts/X11/Type1/" FontPath "/usr/share/fonts/X11/misc/" FontPath "/usr/share/fonts/X11/100dpi/" FontPath "/usr/share/fonts/X11/75dpi/" ModulePath "/opt/xorg_git/lib/xorg/modules/" ModulePath "/opt/xorg_git/lib/xorg/modules/input/" ModulePath "/opt/xorg_git/lib/xorg/modules/drivers/" ModulePath "/opt/xorg_git/lib/xorg/modules/fonts/" ModulePath "/opt/xorg_git/lib/xorg/modules/extensions/" ModulePath "/opt/xorg_git/lib/xorg/modules/linux/" ModulePath "/opt/xorg_git/lib/xorg/modules/linux/" ModulePath "/opt/xorg_git/lib/xorg/modules/multimedia/" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "lv3:ralt_switch" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" EndSection Section "Device" Identifier "Configured Video Device" Driver "radeonhd" Option "DRI" # Driver "fglrx" # Option "TexturedVideo" "on" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" Defaultdepth 24 EndSection Section "ServerLayout" Identifier "Default Layout" screen "Default Screen" EndSection Section "DRI" Mode 0666 EndSection #ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

Matthias Hopf

12:33

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

On Jun 05, 08 01:59:49 +0100, R.M. Thomas wrote:

...

From the character-based console in Ubuntu's "recovery mode" I set "LD_LIBRARY_PATH=/opt/xorg_git/lib" and then ran "startx -- /opt/xorg_git/bin/Xorg". I got a sensible display (xterm under fvwm as specified in .xinitrc) but this display would not accept any input from keyboard or mouse. I could, however, drop back to the character-based console with Ctrl-F1 as usual.

The strange thing is, the server doesn't even *try* to load mouse and keyboard. Which is weird, because I thought the newer Xserver autoload everything necessary...

...

X.Org X Server 1.5.99.1

Did I miss something there? master is at 1.4.99 something.

...

Release Date: 5 September 2007

This doesn't look a recent Xserver. Did you get the right sources? Maybe a wrong branch?

...

Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "lv3:ralt_switch" EndSection

Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" EndSection [...] Section "ServerLayout" Identifier "Default Layout" screen "Default Screen"

Missing InputDevice "Generic Keyboard" "CoreKeyboard" InputDevice "Configured Mouse" "CorePointer" here for older Xservers that don't autoload these. Matthias -- Matthias Hopf __ __ __ Maxfeldstr. 5 / 90409 Nuernberg (_ | | (_ |__ mat@mshopf.de Phone +49-911-74053-715 __) |_| __) |__ R & D www.mshopf.de -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

Michael Gaber

12:37

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

well, perhaps evdev/hal is interfering again, try uninstalling that and try again, perhaps that would help Matthias Hopf schrieb:

...

On Jun 05, 08 01:59:49 +0100, R.M. Thomas wrote:

...
From the character-based console in Ubuntu's "recovery mode" I set "LD_LIBRARY_PATH=/opt/xorg_git/lib" and then ran "startx -- /opt/xorg_git/bin/Xorg". I got a sensible display (xterm under fvwm as specified in .xinitrc) but this display would not accept any input from keyboard or mouse. I could, however, drop back to the character-based console with Ctrl-F1 as usual.

The strange thing is, the server doesn't even *try* to load mouse and keyboard. Which is weird, because I thought the newer Xserver autoload everything necessary...

...
X.Org X Server 1.5.99.1

Did I miss something there? master is at 1.4.99 something.

...
Release Date: 5 September 2007

This doesn't look a recent Xserver. Did you get the right sources? Maybe a wrong branch?

...
Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "lv3:ralt_switch" EndSection

Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" EndSection [...] Section "ServerLayout" Identifier "Default Layout" screen "Default Screen"

Missing

InputDevice "Generic Keyboard" "CoreKeyboard" InputDevice "Configured Mouse" "CorePointer"

here for older Xservers that don't autoload these.

Matthias

-- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

Coleman Kane

13:39

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

On Thu, 2008-06-05 at 14:33 +0200, Matthias Hopf wrote:

...

On Jun 05, 08 01:59:49 +0100, R.M. Thomas wrote:

...
From the character-based console in Ubuntu's "recovery mode" I set "LD_LIBRARY_PATH=/opt/xorg_git/lib" and then ran "startx -- /opt/xorg_git/bin/Xorg". I got a sensible display (xterm under fvwm as specified in .xinitrc) but this display would not accept any input from keyboard or mouse. I could, however, drop back to the character-based console with Ctrl-F1 as usual.

The strange thing is, the server doesn't even *try* to load mouse and keyboard. Which is weird, because I thought the newer Xserver autoload everything necessary...

...
X.Org X Server 1.5.99.1

Did I miss something there? master is at 1.4.99 something.

master is tracking 1.6 (1.5.99.x) development, the server-1.5-branch is tracking 1.4.99.x development. Should we be pulling from that, instead?

...

...
Release Date: 5 September 2007

This doesn't look a recent Xserver. Did you get the right sources? Maybe a wrong branch?

That's what it says in the message on mine too, though I am guessing that the "release date" is only updated for the formal releases.

...

...
Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "lv3:ralt_switch" EndSection

Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" EndSection [...] Section "ServerLayout" Identifier "Default Layout" screen "Default Screen"

Missing

InputDevice "Generic Keyboard" "CoreKeyboard" InputDevice "Configured Mouse" "CorePointer"

here for older Xservers that don't autoload these.

Matthias

-- Matthias Hopf __ __ __ Maxfeldstr. 5 / 90409 Nuernberg (_ | | (_ |__ mat@mshopf.de Phone +49-911-74053-715 __) |_| __) |__ R & D www.mshopf.de

-- Coleman Kane -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

Matthias Hopf

14:05

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

On Jun 05, 08 09:39:10 -0400, Coleman Kane wrote:

...

...
The strange thing is, the server doesn't even *try* to load mouse and keyboard. Which is weird, because I thought the newer Xserver autoload everything necessary...

This still holds. This is strange.

...

...
...
X.Org X Server 1.5.99.1 Did I miss something there? master is at 1.4.99 something. master is tracking 1.6 (1.5.99.x) development, the server-1.5-branch is tracking 1.4.99.x development.

Upstream must be kidding. 1.5 isn't even out, and now there's 1.5.99 tracked?!?

...

Should we be pulling from that, instead?

Shouldn't matter, actually.

...

...
...
Release Date: 5 September 2007 This doesn't look a recent Xserver. Did you get the right sources? Maybe a wrong branch? That's what it says in the message on mine too, though I am guessing that the "release date" is only updated for the formal releases.

Possibly.

...

...
...
Section "ServerLayout" Identifier "Default Layout" screen "Default Screen"

Missing

InputDevice "Generic Keyboard" "CoreKeyboard" InputDevice "Configured Mouse" "CorePointer"

here for older Xservers that don't autoload these.

Please try that. Even though I don't understand why keyboard + mouse drivers aren't autoloaded. CU Matthias -- Matthias Hopf __ __ __ Maxfeldstr. 5 / 90409 Nuernberg (_ | | (_ |__ mat@mshopf.de Phone +49-911-74053-715 __) |_| __) |__ R & D www.mshopf.de -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

R.M. Thomas

21:54

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

Matthias Hopf wrote:

...

...
X.Org X Server 1.5.99.1

Did I miss something there? master is at 1.4.99 something.

...
Release Date: 5 September 2007

This doesn't look a recent Xserver. Did you get the right sources? Maybe a wrong branch?

Coleman Kane wrote: > master is tracking 1.6 (1.5.99.x) development, the server-1.5-branch is

...

tracking 1.4.99.x development.

Should we be pulling from that, instead?

I tried to repeat the build with an older version of xserver by adding the single line git-checkout -b server-1.4-branch to my shell script immediately after the line "cd $SRC/xserver". But it seems this did not achieve what I intended (bad syntax?), because when I ran the new Xorg executable I got the same line X.Org X Server 1.5.99.1 near the top of file /opt/xorg_git/var/log/Xorg.0.log. The behaviour was the same as before: I got a display but it was unresponsive to keyboard and mouse. I should add that in order to ensure a clean, fresh build, I deleted the source directory /var/tmp/radeonhd_dri and the output directory /opt/xorg_git before running my script. Matthias Hopf wrote:

...

...
Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "lv3:ralt_switch" EndSection

Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" EndSection [...] Section "ServerLayout" Identifier "Default Layout" screen "Default Screen"

Missing

InputDevice "Generic Keyboard" "CoreKeyboard" InputDevice "Configured Mouse" "CorePointer"

here for older Xservers that don't autoload these.

Before attempting to build with the older xserver I edited /etc/X11/xorg.conf to include the option "CoreKeyboard" for InputDevice "Generic Keyboard". (The option "CorePointer" for InputDevice "Configured Mouse" was already present.) This edit had no effect: the display still did not accept input from keyboard or mouse. Mike ASUS P2-M2A690G, AMD Athlon64 X2 4800+, Ubuntu Hardy 32-bit, ATI Radeon 1250 -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

David Morrison

6 Jun 6 Jun

19:26

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

I have some small success to report. I had been using cd $SRC/drm ./autogen.sh --prefix=/usr make make install cd linux-core make DRM_MODULES="radeon" make install depmod -a to install the drm module. On my Ubuntu 8.04 x86_64 system that ends up putting drm.ko and radeon.ko in /lib/modules/2.6.24-17-generic/extra Those are never seen and I kept loading old modules from elsewhere. When I actually followed the directions in drm/README and copied the *.ko files to /lib/modules/2.6.24-17-generic/kernel/drivers/char/drm Then they were properly loaded and I get this in Xorg.0.log (code still has my extra instrumentation): drmOpenByBusid: Searching for BusID pci:0000:01:05.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: major device number is 226 drmOpenDevice: remove (/dev/dri/card0) result is -1, (No such file or directory) drmOpenDevice: mknod (/dev/dri/card0) result is 0, (OK) drmOpenDevice: chown (/dev/dri/card0) result is 0, (OK) drmOpenDevice: chmod (/dev/dri/card0) result is 0, (OK) drmOpenDevice: stat (/dev/dri/card0) result is 0, (OK) drmOpenDevice: open result is 7, (OK) drmOpenByBusid: drmOpenMinor returns 7 drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 (II) RADEONHD(0): Found libdrm 1.3.0. (II) RADEONHD(0): Found radeon drm 1.29.0. I see that drm/linux-core/Makefile is invoking a Makefile from the installed kernel itself to build and install the modules. At least on Ubuntu there seems to be some skew between the assumptions in drm/linux-core and the Makefile in the kernel tree. Regards, Dave -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

Matthias Hopf

10 Jun 10 Jun

12:16

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

On Jun 06, 08 15:26:22 -0400, David Morrison wrote:

...

to install the drm module. On my Ubuntu 8.04 x86_64 system that ends up putting drm.ko and radeon.ko in

/lib/modules/2.6.24-17-generic/extra

Those are never seen and I kept loading old modules from elsewhere. When I

That's what the depmod -a is actually for. If this didn't work, I'd like to have an explanation of someone more involved with kernel development, because the priorities of the module directories isn't really clear to me. It worked for me, so I thought it's fine... Thanks Matthias -- Matthias Hopf __ __ __ Maxfeldstr. 5 / 90409 Nuernberg (_ | | (_ |__ mat@mshopf.de Phone +49-911-74053-715 __) |_| __) |__ R & D www.mshopf.de -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

Matthias Hopf

12:13

New subject: 0x791E:0x1043:0x8287: ATI Radeon 1250

On Jun 05, 08 22:54:58 +0100, R.M. Thomas wrote:

...

Coleman Kane wrote: > master is tracking 1.6 (1.5.99.x) development, the server-1.5-branch is

...
tracking 1.4.99.x development. Should we be pulling from that, instead?

I tried to repeat the build with an older version of xserver by adding the single line

git-checkout -b server-1.4-branch

this should read git-checkout -b server-1.4-branch --track origin/server-1.4-branch (remember you already created your own branch, so you probably need to 'git-checkout master; git-branch -d server-1.4-branch' first). Alternatively, you can checkout the branch in a non-tracking read-only way: git-checkout origin/server-1.4-branch

...

to my shell script immediately after the line "cd $SRC/xserver". But it seems this did not achieve what I intended (bad syntax?), because when I ran the new Xorg executable I got the same line

X.Org X Server 1.5.99.1

Because you created a new branch at the previously checked out version. HTH Matthias -- Matthias Hopf __ __ __ Maxfeldstr. 5 / 90409 Nuernberg (_ | | (_ |__ mat@mshopf.de Phone +49-911-74053-715 __) |_| __) |__ R & D www.mshopf.de -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

Mike Mestnik

5 Jun 5 Jun

15:50

New subject: stable and safe testing platforms Was: 0x791E:0x1043:0x8287: ATI Radeon 1250

On Thu, Jun 05, 2008 at 01:59:49AM +0100, R.M. Thomas wrote:

...

Some progress but no success yet.

...
Maybe you should try building + installing everything with a different --prefix (/usr/local or /opt/xorg_git or something like that). The wiki page describes what you need to do, though not really in detail.

I currently am doing something a little more insane, but it happens to work. The advantage is header and shared objects are not shared with any other part of the system, this cuts down on problems caused by these. Using rbind and bind mounts I'm able to run a gnome session cross chroots... gnome-panel plugins loaded from different chroots and the XC server running in even another chroot. To make things easy/ I'm using schroot, so my xserverrc and xsessionrc files can enter the chroots. Here is my fstab (using Debian syntax for it's mount command. Knowen not to work in rhel4.) /proc /ppc32/proc none rbind 0 0 /dev /ppc32/dev none rbind 0 0 /sys /ppc32/sys none rbind 0 0 /tmp /ppc32/tmp none rbind 0 0 /home /ppc32/home none rbind 0 0 /media /ppc32/media none rbind 0 0 /lib/modules /ppc32/lib/modules none rbind 0 0 /var/run/dbus /ppc32/var/run/dbus none rbind 0 0 /var/run/cups /ppc32/var/run/cups none rbind 0 0 /var/db/nscd /ppc32/var/db/nscd none rbind 0 0 /var/run/nscd /ppc32/var/run/nscd none rbind 0 0 # With this I'm able to load 32bit panel plugins into a 64bit # gnome-panel. My X server runs out of /lenny/. /proc /lenny/proc none rbind 0 0 /dev /lenny/dev none rbind 0 0 /sys /lenny/sys none rbind 0 0 /tmp /lenny/tmp none rbind 0 0 /home /lenny/home none rbind 0 0 /media /lenny/media none rbind 0 0 /lib/modules /lenny/lib/modules none rbind 0 0 /var/run/dbus /lenny/var/run/dbus none rbind 0 0 /var/run/cups /lenny/var/run/cups none rbind 0 0 /var/db/nscd /lenny/var/db/nscd none rbind 0 0 /var/run/nscd /lenny/var/run/nscd none rbind 0 0 It would be awsome to have a server chroot and client chroot, for testing. Also bootable CDs, like knoppix would be nice. I'm not sure what would go-into the chroots... would it make sence to have the build environment and a script that grabs git, or just have the binarys? I think using chroots like this will make distributing and testing software esier... for non-development systems there is an advantage to using shared objects, but not for testing IMHO. Perhasps the answer is to build a static Xserver instead? Still with that approch you will want a controled chroot for your build process... So there may be little extra bennifit.

...

I have done a completely fresh build after removing the stale headers related to X in /usr/include. I used the prefix /opt/xorg_git and downloaded the minimum needed to meet dependencies. The build completed without error messages.

From the character-based console in Ubuntu's "recovery mode" I set "LD_LIBRARY_PATH=/opt/xorg_git/lib" and then ran "startx -- /opt/xorg_git/bin/Xorg". I got a sensible display (xterm under fvwm as specified in .xinitrc) but this display would not accept any input from keyboard or mouse. I could, however, drop back to the character-based console with Ctrl-F1 as usual.

The file /opt/xorg_git/var/log/Xorg.0.log showed no errors. In particular, my weekend problem with opening /dev/dri/card0 seems to have gone away.

I attach for your information:

(1) The shell script I used to carry out the latest build. (2) Xorg.0.log (3) xorg.conf

I'm a novice at this X business and appreciate all comments and advice.

Mike ASUS P2-M2A690G, AMD Athlon64 X2 4800+, Ubuntu Hardy 32-bit, ATI Radeon 1250

************** SCRIPT FOLLOWS **************

#!/bin/sh #------------------------------------------------------------------ # # gitradeonhd.sh # # Made by Mike Thomas # on the basis of a limited understanding of # http://www.x.org/wiki/radeonhd:DRI # http://www.x.org/wiki/Development/git # #------------------------------------------------------------------ STR1="/home/rmthomas/h1" STR2="/home/rmthomas/h2" SRC="/var/tmp/radeonhd-dri" PREFIX="/opt/xorg_git" LIB="lib" export PKG_CONFIG_PATH=$PREFIX/$LIB/pkgconfig export LD_LIBRARY=$PREFIX/$LIB export PATH=$PREFIX/bin:$PATH if [ ! -d $SRC ]; then mkdir $SRC; fi cd $SRC #------------------------------------------------------------------ # Mentioned in http://www.x.org/wiki/radeonhd:DRI #------------------------------------------------------------------ git clone git://anongit.freedesktop.org/git/xorg/util/macros git clone git://anongit.freedesktop.org/git/mesa/drm git clone git://anongit.freedesktop.org/git/mesa/mesa git clone git://anongit.freedesktop.org/git/xorg/xserver git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-video-radeonhd wget ftp://ftp.freedesktop.org/pub/individual/proto/dri2proto-1.1.tar.bz2 -a wget.log wget ftp://ftp.freedesktop.org/pub/individual/proto/xextproto-7.0.3.tar.bz2 -a wget.log wget ftp://ftp.freedesktop.org/pub/individual/proto/xproto-7.0.13.tar.bz2 -a wget.log wget ftp://ftp.freedesktop.org/pub/individual/lib/pixman-0.10.0.tar.bz2 -a wget.log git clone git://anongit.freedesktop.org/git/xorg/proto/inputproto git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-input-mouse git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-input-keyboard git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-input-evdev

#------------------------------------------------------------------ # Extras apparently needed to resolve dependencies (on my machine) #------------------------------------------------------------------ git clone git://anongit.freedesktop.org/git/xorg/proto/glproto git clone git://anongit.freedesktop.org/git/xorg/lib/libpciaccess

#------------------------------------------------------------------ # For no good reason, just an experiment #------------------------------------------------------------------ git clone git://anongit.freedesktop.org/git/xorg/driver/xf86-video-vesa #------------------------------------------------------------------

bunzip2 dri2proto-1.1.tar.bz2 && tar xvf dri2proto-1.1.tar bunzip2 xextproto-7.0.3.tar.bz2 && tar xvf xextproto-7.0.3.tar bunzip2 xproto-7.0.13.tar.bz2 && tar xvf xproto-7.0.13.tar bunzip2 pixman-0.10.0.tar.bz2 && tar xvf pixman-0.10.0.tar

#------------------------------------------------------------------ # Build starts here #------------------------------------------------------------------

...
$STR1 $STR2

cd $SRC/macros ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 export ACLOCAL="aclocal -I $PREFIX/share/aclocal"

cd $SRC/drm ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd linux-core make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 depmod -a

cd $SRC/glproto ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/libpciaccess ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/dri2proto-1.1 ./configure --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/mesa ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 mkdir -p /opt/xorg_git/bin install -m755 progs/xdemos/glxinfo /opt/xorg_git/bin/ 1>>$STR1 2>>$STR2 install -m755 progs/xdemos/glxgears /opt/xorg_git/bin/ 1>>$STR1 2>>$STR2

cd $SRC/xextproto-7.0.3 ./configure --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/xproto-7.0.13 ./configure --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/inputproto ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/pixman-0.10.0 ./configure --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/xserver ./autogen.sh --prefix=$PREFIX --enable-builtin-fonts \ --with-xkb-path=/usr/share/X11/xkb 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/xf86-input-mouse ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/xf86-input-keyboard ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 cd $PREFIX/bin ln -s /usr/bin/xkbcomp xkbcomp

cd $SRC/xf86-input-evdev ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

cd $SRC/xf86-video-radeonhd ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2 depmod -a

cd $SRC/xf86-video-vesa ./autogen.sh --prefix=$PREFIX 1>>$STR1 2>>$STR2 make 1>>$STR1 2>>$STR2 make install 1>>$STR1 2>>$STR2

#------------------------------------------------------------------ # Run new setup following http://www.x.org/wiki/Development/git #------------------------------------------------------------------ rmmod radeon rmmod drm insmod $SRC/drm/linux-core/drm.ko insmod $SRC/drm/linux-core/radeon.ko export LD_LIBRARY_PATH=$PREFIX/lib

startx -- $PREFIX/bin/Xorg -verbose #------------------------------------------------------------------ exit 0 #ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ

-- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

-- /**************************************************************** * Mike Mestnik: Junior Admin 612-395-8932 * * mmestnik@visi.com VISI * ****************************************************************/ Alt address: collections@spam.visi.com -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org

5800

Age (days ago)

5808

Last active (days ago)

List overview

Download

12 comments

6 participants

participants (6)

Coleman Kane
David Morrison
Matthias Hopf
Michael Gaber
Mike Mestnik
R.M. Thomas