Problem: Monitor not detected, radeonhd driver refuses to start. Notes: Vesa driver DOES detect the monitor, but highest vesa resolution is too low to look good. Linux console in VGA mode works fine too. Monitor is connected via ATEN MasterView CS-114A KVM switch to VGA output of card. Case looks similar to an e-mail thread in June with a similar GigaByte card and another brand of KVM switch, but that users trouble went away with a seemingly unrelated downgrade of xserver and then noone bothered to complete the investigation. http://lists.opensuse.org/radeonhd/2009-06/msg00004.html It seems that this version of radeonhd gives up too easily on the VGA connector, maybe you should try to do a DDC detection on it before declaring it unconnected, something like: // Deliberate use of non-shortcut | operator so ddc data is // not forgotten. if (MeasuresAsConnected(plug) | ddc_edid_detect(plug)) { // This plug is connected, use it unless config says don't } else { // This plug is either unconnected or connected to a // pre-1996 monitor with high-impedance inputs. } // ... if (all plugs seem unconnected) { // Connection detection failed, either something went wrong, // or analog cable is not plugged in all the time. // Init first analog connectors for configured monitor or // classic IBM VGA monitor, so plugging in any // VGA-compatible monitor later will get a usable picture // of what ran between now and then. // Also init all tv outputs (once implemented) for the // default analog-tv resolution of the chosen TV standard // (50 Hz Vsync, 15625 Hz Hsync, interlaced, about 640x480 // visible pixels in most of the world, so use this as // default if no other info available). } OS: Debian lenny in chroot with some components upgraded to squeeze to get latest radeonhd driver. Linux 2.6.31 kernel. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Output from rhd_conntest with comments: ASUS M3A78-CM Motherboard with onboard AM780V(RS780) Connector placement (rear view): KBD VGA eth0 USB USB USB USB DPORT DVI-D USB USB PCIe-x1 PCIe-x16 PCI PCI (eth0 = Realtek RTL8168 10/100/1000Mbit ethernet) (DPORT = DisplayPort) Card has BIOS options for: Frame buffer above or below 4G (below selected), Frame buffer size in MB ("Auto" selected), Enable/diable DisplayPort (disable selected), Choose primary display from the 3 ports or plugged in PCIe-x16 slot (PCIe-x16 slot empty on this machine, so doesn't matter). TRY 1: VGA connected, DVI disconnected, DPORT disabled in BIOS: rhd_conntest: v1.2.5, non-git sources Checking connectors on 0x9611, 0x1043, 0x82EE (@01:05:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_0 TRY 2: VGA disconnected, DVI connected, DPORT disabled in BIOS: rhd_conntest: v1.2.5, non-git sources Checking connectors on 0x9611, 0x1043, 0x82EE (@01:05:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_0 DDC: RHD_DDC_1 TRY 3: VGA disconnected, DVI disconnected, DPORT disabled in BIOS: rhd_conntest: v1.2.5, non-git sources Checking connectors on 0x9611, 0x1043, 0x82EE (@01:05:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_NONE ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ xorg.conf (not autogenerated, I just never bothered to delete the comment at the top): # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Files" FontPath "/usr/share/fonts/X11/misc" # FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" # FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "GLcore" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "dri2" Load "extmod" # Load "freetype" Load "glx" Load "int10" Load "record" Load "speedo" # Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" EndSection Section "Device" Identifier "ATI 3100 [on ASUS M3A78-CM MB]" # Driver "vesa" Driver "radeonhd" # Option "HPD" "swap" # Option "NoRandr" # Option "UseConfiguredMonitor" "on" EndSection Section "Device" Identifier "nVidia Corporation NV34 [GeForce FX 5200]" # Driver "nvidia" Driver "nv" EndSection # Section "Monitor" # Identifier "Neovo F-419" # Option "DPMS" # HorizSync 30-65 # VertRefresh 50-75 # EndSection Section "Monitor" Identifier "Samsung 245B" Option "DPMS" HorizSync 30-81 VertRefresh 56-75 EndSection Section "Screen" Identifier "Default Screen" # Device "nVidia Corporation NV34 [GeForce FX 5200]" Device "ATI 3100 [on ASUS M3A78-CM MB]" # Monitor "Neovo F-419" Monitor "Samsung 245B" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1920x1200" EndSubSection SubSection "Display" Depth 4 Modes "1920x1200" EndSubSection SubSection "Display" Depth 8 Modes "1920x1200" EndSubSection SubSection "Display" Depth 15 Modes "1920x1200" EndSubSection SubSection "Display" Depth 16 Modes "1920x1200" EndSubSection SubSection "Display" Depth 24 Modes "1920x1200" EndSubSection EndSection Section "ServerFlags" Option "AllowEmptyInput" "off" EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "DRI" Mode 0666 EndSection ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ /var/log/Xorg.0.log: X.Org X Server 1.6.4 Release Date: 2009-9-27 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.30.8-dsa-amd64 x86_64 Debian Current Operating System: Linux jbj3 2.6.31jbj3.4-43 #1 SMP Fri Oct 16 23:49:58 CEST 2009 x86_64 Build Date: 30 September 2009 11:12:55PM xorg-server 2:1.6.4-2 (buildd@brahms.debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 22 19:33:56 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Samsung 245B" (**) | |-->Device "ATI 3100 [on ASUS M3A78-CM MB]" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Configured Mouse" (**) Option "AllowEmptyInput" "off" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Loader magic: 0x3b40 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (WW) xf86OpenConsole: setpgid failed: Operation not permitted (WW) xf86OpenConsole: setsid failed: Operation not permitted (--) PCI:*(0:1:5:0) 1002:9611:1043:82ee ATI Technologies Inc Radeon 3100 Graphics rev 0, Mem @ 0xd0000000/268435456, 0xfbdf0000/65536, 0xfbc00000/1048576, I/O @ 0x0000c000/256 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [31] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [33] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [35] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.4, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.4, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.4, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.4, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "radeonhd" (II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so (II) Module radeonhd: vendor="AMD GPG" compiled for 1.6.0, module version = 1.2.5 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices: RV505 : Radeon X1550, X1550 64bit. RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350. RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250. R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350. RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200. RV535 : Radeon X1300, X1650. RV550 : Radeon X2300 HD. RV560 : Radeon X1650. RV570 : Radeon X1950, X1950 GT; FireGL V7400. R580 : Radeon X1900, X1950; AMD Stream Processor. R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650. RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000. RV620 : Radeon HD 3450, HD 3470. RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630; FireGL V3600/V5600. RV635 : Radeon HD 3650, HD 3670. RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170. R680 : Radeon HD 3870 X2. M52 : Mobility Radeon X1300. M54 : Mobility Radeon X1400; M54-GL. M56 : Mobility Radeon X1600; Mobility FireGL V5200. M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200. M62 : Mobility Radeon X1350. M64 : Mobility Radeon X1450, X2300. M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250. M68 : Mobility Radeon X1900. M71 : Mobility Radeon HD 2300. M72 : Mobility Radeon HD 2400; Radeon E2400. M74 : Mobility Radeon HD 2400 XT. M76 : Mobility Radeon HD 2600; (Gemini ATI) Mobility Radeon HD 2600 XT. M82 : Mobility Radeon HD 3400. M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700. M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2. RS600 : Radeon Xpress 1200, Xpress 1250. RS690 : Radeon X1200, X1250, X1270. RS740 : RS740, RS740M. RS780 : Radeon HD 3100/3200/3300 Series. RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro. R700 : Radeon R700. M98 : Radeon M98 Mobility. RV730 : Radeon HD4670, HD4650. M96 : Radeon M96 Mobility. RV710 : Radeon HD4570, HD4350. (II) RADEONHD: version 1.2.5, built from non-git sources (II) Primary Device is: PCI 01@00:05:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [31] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [33] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [35] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [34] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [36] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [38] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Selected ShadowFB. (II) RADEONHD(0): Unknown card detected: 0x9611:0x1043:0x82EE. If - and only if - your card does not work or does not work optimally please contact radeonhd@opensuse.org to help rectify this. Use the subject: 0x9611:0x1043:0x82EE: <name of board> and *please* describe the problems you are seeing in your message. (--) RADEONHD(0): Detected an RS780 on an unidentified card (II) RADEONHD(0): Mapped IO @ 0xfbdf0000 to 0x7fd159bb8000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x1002 IOBaseAddress: 0xc000 Filename: Test.bin BIOS Bootup Message: B27722_RS780C RS780 DDR2 200e/500m (II) RADEONHD(0): Analog TV Default Mode: 4294967040 (--) RADEONHD(0): VideoRAM: 262144 kByte (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffc000 (II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffc000 (II) RADEONHD(0): Default Engine Clock: 350000 (II) RADEONHD(0): Default Memory Clock: 400000 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 14320 (II) RADEONHD(0): Direct rendering not officially supported on R600 and up (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) RADEONHD(0): Reference Clock: 14320 (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88 (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0 (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88 (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8 (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 14320 (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000) (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000) (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_D DFP3", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_KLDSKP_LVTMA, RHD_OUTPUT_NONE } } (--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1 (--) RADEONHD(0): Attaching Output UNIPHY_KLDSKP_LVTMA to Connector DVI-D 1 (II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output UNIPHY_KLDSKP_LVTMA (II) RADEONHD(0): Output VGA_1 using monitor section Samsung 245B (II) RADEONHD(0): Output VGA_1 has no monitor section (II) RADEONHD(0): Output DVI-D_1 has no monitor section (II) RADEONHD(0): EDID for output VGA_1 (II) RADEONHD(0): EDID for output DVI-D_1 (II) RADEONHD(0): Output VGA_1 disconnected (II) RADEONHD(0): Output DVI-D_1 disconnected (WW) RADEONHD(0): No outputs definitely connected, trying again... (II) RADEONHD(0): Output VGA_1 disconnected (II) RADEONHD(0): Output DVI-D_1 disconnected (WW) RADEONHD(0): Unable to find initial modes (EE) RADEONHD(0): RandR: No valid modes. Disabling RandR support. (EE) RADEONHD(0): Failed to detect a connected monitor (II) RADEONHD(0): Destroying DAC A (II) RADEONHD(0): Destroying UNIPHY_KLDSKP_LVTMA Backtrace: 0: /usr/bin/X(xorg_backtrace+0x26) [0x4ee026] 1: /usr/bin/X(xf86SigHandler+0x39) [0x4836c9] 2: /lib/libc.so.6 [0x7fd157646db0] 3: /usr/lib/xorg/modules/drivers//radeonhd_drv.so(RHDAudioUnregisterHdmi+0x4d) [0x7fd155a3bbed] 4: /usr/lib/xorg/modules/drivers//radeonhd_drv.so(RHDHdmiDestroy+0x42) [0x7fd155a526b2] 5: /usr/lib/xorg/modules/drivers//radeonhd_drv.so [0x7fd155a4b8c8] 6: /usr/lib/xorg/modules/drivers//radeonhd_drv.so(RHDOutputsDestroy+0x5c) [0x7fd155a6195c] 7: /usr/lib/xorg/modules/drivers//radeonhd_drv.so [0x7fd155a4ce92] 8: /usr/lib/xorg/modules/drivers//radeonhd_drv.so [0x7fd155a4f3e9] 9: /usr/bin/X(InitOutput+0xd7c) [0x46de9c] 10: /usr/bin/X(main+0x200) [0x4331d0] 11: /lib/libc.so.6(__libc_start_main+0xe6) [0x7fd1576335c6] 12: /usr/bin/X [0x432819] Fatal server error: Caught signal 11. Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- This message is hastily written, please ignore any unpleasant wordings, do not consider it a binding commitment, even if its phrasing may indicate so. Its contents may be deliberately or accidentally untrue. Trademarks and other things belong to their owners, if any. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org