11.1 Hauppauge PVT350: Sound und Bildprobleme
Hallo zusammen, unter openSUSE 11.1 (Update von 11.0 UND nun neu installiert) bekomme ich meine TV Karte Hauppauge WinTV PVT350 nicht richtig zum funktionieren. Es wirkt sich so aus, dass der Sound irgendwie quitschig klingt. So als wenn die Wiedergabegeschwindigkeit sich in kleinen Schritten hin und her ändert. Auch beim Bild gibt es, abhängig welchen Player ich verwende, folgende Probleme: 'vlc': bleibt nach ein paar Sekunden stehen. Nach Pause und Wiedergabe arbeitet er wieder ein paar Sekunden (10 - 20). vlc file:///dev/video 'xine': bleibt immer wieder stehen und muss den Stream Buffern. cat /dev/video | xine stdin:/ 'gmplayer': Faengt nach ein paar Sekunden das Stottern an. Siehe hierzu den Output weiter unten. gmplayer -framedrop -cache 8192 -aspect 4:3 /dev/video Prinzipiell arbeitet die TV Karte. Bild und Ton sind vorhanden, aber halt mit den oben genannten Einschraenkungen. Nicht wirklich benutzbar. Ich benutze die TV Karte schon seit SUSE 7 oder 8, auch auf kleineren Rechnern und hatte noch nie solche Probleme. Unter 11.0 beispielsweise, das sich auf einer anderen Partition befindet, funktioniert die Hauppauge PVR-350 perfekt. Auch YAST macht beim Einrichten der PVR-350 Probleme. Ich bekomme die Karte nicht komplett eingerichtet. Fuer YAST ist die Karte jedenfalls immer 'Nicht konfiguriert'. Wenn ich die Karte in YAST einrichte und den Dialog mit 'OK' beende, kommt er ueber 'Firmware installieren' nicht hinaus. Desswegen werden wahrscheinlich auch die Sound und IRC Einstellungen jedesmal nicht gespeichert, weil die erst danach kommen. Im YAST TV Module unten steht zu lesen: - Als TV-Karte Nummer 0 konfiguriert - Treiber ivtv - Paket 'ivtv' von 'Installiert' - Paket 'ivtv-firmware' von 'Installiert' - Paket 'ivtv-kmp-default' von 'Nicht installiert' Dass es 'ivtv-kmp-default' nicht mehr gibt weil jetzt im Kernel, habe ich hier auf der Liste gelesen, aber warum will YAST es dann installieren ? Koennte es daran liegen, dass ich keine TV Stationen konfiguriere ? Aber das habe ich bisher auch noch nie gemacht, weil ich schon immer nur einen SAT-Empfaenger an dem SCART-Kabel an der PVR-350 betreibe. Gruss Werner Franke ---------------------------------------------------------------- Mein System: CPU: Dual Core E4800 (2 x 3GHz) Grafik: Geforce 8600GT (Nvidia Treiber) RAM: 4 GB Mplayer Output: (wfranke obelix tcsh) [49] gmplayer -framedrop /dev/video MPlayer dev-SVN-r27637-4.3-openSUSE Linux 11.1 (i686)-Packman (C) 2000-2008 MPlayer Team CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (Family: 6, Model: 23, Stepping: 6) CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled with runtime CPU detection. Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: Connection refused Failed to open LIRC support. You will not be able to use your remote control. Playing /dev/video. Cache fill: 19.34% (1622016 bytes) MPEG-PS file format detected. VIDEO: MPEG2 720x480 (aspect 2) 29.970 fps 8000.0 kbps (1000.0 kbyte/s) ========================================================================== Trying to force video codec driver family ffmpeg... Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2) ========================================================================== ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... VDec: vo config request - 720 x 480 (preferred colorspace: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. VO: [xv] 720x480 => 720x540 Planar YV12 (<unknown>:10441): Gtk-WARNING **: Default font does not have a positive size [mpeg2video @ 0x88c6470]ac-tex damaged at 12 0 [mpeg2video @ 0x88c6470]Warning MVs not available [mpeg2video @ 0x88c6470]concealing 1350 DC, 1350 AC, 1350 MV errors A: 31.1 V: 21.3 A-V: 9.774 ct: 0.212 591/591 2% 0% 540.2% 50 0 0% ************************************************ **** Your system is too SLOW to play this! **** ************************************************ Possible reasons, problems, workarounds: - Most common: broken/buggy _audio_ driver - Try -ao sdl or use the OSS emulation of ALSA. - Experiment with different values for -autosync, 30 is a good start. - Slow video output - Try a different -vo driver (-vo help for a list) or try -framedrop! - Slow CPU - Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts, e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all. - Broken file - Try various combinations of -nobps -ni -forceidx -mc 0. - Slow media (NFS/SMB mounts, DVD, VCD etc) - Try -cache 8192. - Are you using -cache to play a non-interleaved AVI file? - Try -nocache. Read DOCS/HTML/en/video.html for tuning/speedup tips. If none of this helps you, read DOCS/HTML/en/bugreports.html. ----------------------- Video-Out: "xv X11/Xv" oder "gl X11 (OpenGL)" /var/log/boot.msg <6>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <7>HDA Intel 0000:00:1b.0: setting latency timer to 64 <6>Linux video capture interface: v2.00 <6>ivtv: Start initialization, version 1.4.0 <6>ivtv0: Initializing card #0 <6>ivtv0: Autodetected Hauppauge card (cx23415 based) <6>vendor=8086 device=244e <6>ivtv 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 <6>ivtv0: Unreasonably low latency timer, setting to 64 (was 32) <6>ivtv i2c driver #0: Test OK <6>tveeprom 1-0050: Hauppauge model 48134, rev J347, serial# 7112467 <6>tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28) <6>tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) <6>tveeprom 1-0050: audio processor is MSP4418 (idx 25) <6>tveeprom 1-0050: decoder processor is SAA7115 (idx 19) <6>tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter <6>ivtv0: Autodetected Hauppauge WinTV PVR-350 <6>saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) <6>saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) <6>msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) <6>msp3400 1-0040: msp3400 supports nicam and radio, mode is autodetect and autoselect <6>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) <6>tuner-simple 1-0061: creating new instance <6>tuner-simple 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) <6>ivtv0: Registered device video0 for encoder MPG (4096 kB) <6>ivtv0: Registered device video32 for encoder YUV (2048 kB) <6>ivtv0: Registered device vbi0 for encoder VBI (1024 kB) <6>ivtv0: Registered device video24 for encoder PCM (320 kB) <6>ivtv0: Registered device radio0 for encoder radio <6>ivtv0: Registered device video16 for decoder MPG (1024 kB) <6>ivtv0: Registered device vbi8 for decoder VBI (64 kB) <6>ivtv0: Registered device vbi16 for decoder VOUT <6>ivtv0: Registered device video48 for decoder YUV (1024 kB) <6>ivtv0: Initialized card #0: Hauppauge WinTV PVR-350 <6>vendor=8086 device=244e <6>EMU10K1_Audigy 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 <6>ivtv: End initialization -- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
participants (1)
-
Werner Franke