Hi! Ich habe schon eine ganze Weile einen Aopen CDRW4852, 48-fach-Brenner. Der hat auch nie Ärger gemacht, aber seit heute kann ich kaum noch eine Audio-CD brennen, weil er immer an unterschiedlichsten Stellen abbricht. Ich habe nach einigen mit k3b geschrotteten Rohlingen (grrr...) jetzt direkt - wie früher - cdrecord von Hand und den dummy-Modus genommen. Mit dummy bekomme ich in 2/3 alle Versuche an unterschiedlichen Stellen Fehler, mal direkt bei CUE-Sheet, mal erst mittendrin. Und in 1/3 aller Fälle läuft der dummy-Mode auch durch. Wenn ich wirklich brenne, klappt es manchmal fehlerfrei, meistens bricht es ab. Den Rechner (athlon-2000) habe ich jedesmal in Ruhe gelassen und die Brenngeschwindigkeit für die Versuche auf 16x gedrosselt (sonst habe ich immer 36x-48x verwendet), mal DAO, mal TAO probiert. Ich vermute jetzt, dass der Brenner hin ist. Kann man das an den Fehlermeldungen erkennen? Wie kann ich den Brenner denn definitiv als kaputt erkennen? (mit dem Brennen von ISO-Images habe ich übrigens bis jetzt keine solchen Probleme, aber Audio ist leider nicht ISO...) Folgende Fehler habe ich typischerweise: 1. Cue sheet: Kommando: # cdrecord -v dev=1,0,0 speed=16 fs=32M -dao -audio -pad *.wav Cdrecord 2.0 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 0 = CD-DA scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.7' cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'AOPEN ' Identifikation : 'CD-RW CRW4852 ' Revision : '1.00' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1359872 = 1328 KB FIFO size : 33554432 = 32768 KB Track 01: audio 3 MB (00:22.30) no preemp pad ---[GEKÜRZT!] Track 14: audio 49 MB (04:52.36) no preemp pad Total size: 502 MB (49:44.89) = 223867 sectors Lout start: 502 MB (49:46/67) = 223867 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11607 (97:27/18) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 18 Manufacturer: Plasmon Data systems Ltd. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 135982 Forcespeed is OFF. Starting to write CD/DVD at speed 16 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Performing OPC... Sending CUE sheet... cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1. cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error CDB: 5D 00 00 00 00 00 00 00 F0 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0C 00 00 00 00 26 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.053s timeout 200s cdrecord: Cannot send CUE sheet. cdrecord: Could not write Lead-in. Writing time: 6.608s cdrecord: fifo had 511 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. 2. Mittendrin: Kommando: # cdrecord -v dev=1,0,0 speed=16 fs=32M -audio -pad -dummy *.wav Cdrecord 2.0 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 0 = CD-DA scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.7' cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'AOPEN ' Identifikation : 'CD-RW CRW4852 ' Revision : '1.00' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1359872 = 1328 KB FIFO size : 33554432 = 32768 KB Track 01: audio 3 MB (00:22.30) no preemp pad ---[GEKÜRZT!] Track 14: audio 49 MB (04:52.36) no preemp pad Total size: 506 MB (50:10.89) = 225817 sectors Lout start: 506 MB (50:12/67) = 225817 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11607 (97:27/18) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 18 Manufacturer: Plasmon Data systems Ltd. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 134032 Forcespeed is OFF. Starting to write CD/DVD at speed 16 in dummy TAO mode for single session. Last chance to quit, starting dummy write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Starting new track at sector: 0 Track 01: 3 of 3 MB written (fifo 100%) [buf 65%] 17.8x. WARNING: padding up to secsize. Track 01: Total bytes read/written: 3935232/3937248 (1674 sectors). Starting new track at sector: 1826 ---[GEKÜRZT!] Track 13: 43 of 44 MB written (fifo 100%) [buf 14%] 14.4x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 03 1A 7A 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 03 1A 7C 0C 00 00 00 00 10 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] Fru 0x0 Sense flags: Blk 203388 (valid) cmd finished after 0.057s timeout 40s write track data: error after 45405360 bytes Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00 Writing time: 232.193s Average write speed 13.0x. Min drive buffer fill was 14% Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.004s cdrecord: fifo had 7971 puts and 7461 gets. cdrecord: fifo was 0 times empty and 4400 times full, min fill was 98%. Kann jemand was damit anfangen? Wäre ärgerlich, den wegzuschmeissen, wenn es an was anderem liegt... Jörg@home -- Freedom is just chaos with better lighting. joerg@donalbain.de http://www.donalbain.de running Kernel: 2.4.20 theater hEXagon Kiel http://www.theater-hexagon.de neu 2003: König Ubu