Mit welchem Prog kann ich REal Audio Dateien, also in Real Audio Fromat, aufnehmen (ambesten graph. Oberfläche oder aber idioteneinfache Konsolenbedienung)? Es gibt da dieses wahnsinnig tolle www.kcrw.org, da möchte ich mir die eine oder andere Sendung von Cafe LA aufnehmen, zu wav konvertieren und dann auf CD fürs Auto bruzzeln. Hab ich da ne Chance? Jost
Mail vom Montag, 18. März 2002 23:34: Moin Jost,
Mit welchem Prog kann ich REal Audio Dateien, also in Real Audio Fromat, aufnehmen (ambesten graph. Oberfläche oder aber idioteneinfache Konsolenbedienung)?
um selbst RealAudio Dateien zu erstellen nimmst du den Realproducer.
Es gibt da dieses wahnsinnig tolle www.kcrw.org, da möchte ich mir die eine oder andere Sendung von Cafe LA aufnehmen, zu wav konvertieren und dann auf CD fürs Auto bruzzeln.
achso, du wolltest das ganze andersrum. Ok, dein Problem ist wohl, dass du die empfangenen Daten nicht speichern kannst, da der Realplayer das nicht anbietet. Wenn du dich über die Rechtslage informiert hast, kann ich dir VSOUND (http://www.zip.com.au/~erikd/vsound/) empfehlen.
Hab ich da ne Chance?
probier es mal aus und melde dich bei Erfolg einfach nochmal... Gruß Kai
Hallo Kai,
Mit welchem Prog kann ich REal Audio Dateien, also in Real Audio Fromat, aufnehmen (ambesten graph. Oberfläche oder aber idioteneinfache Konsolenbedienung)?
achso, du wolltest das ganze andersrum. Ok, dein Problem ist wohl, dass du die empfangenen Daten nicht speichern kannst, da der Realplayer das nicht anbietet. Wenn du dich über die Rechtslage informiert hast, kann ich dir VSOUND (http://www.zip.com.au/~erikd/vsound/) empfehlen.
Die Installation ging ok, jetzt komme ich aber hier nicht richtig weiter (s.u.) bei der Aufnahme von "ra" bzw "G2" Formaten. Wo liegt jetzt das Problem - daß die datei ./vsound2345.au fehlt oder daß ich die Timing Option angebe, oder beides? Und wie rufe ich die Timing Option auf - mir ist in der Doku nichts aufgefallen. Real Audio bringt diese Fehlermeldung: Invalid protocol specified in the URL.Url should usually start with "rtsp://" or "pnm://" or "http://" input rm und die Shell diese: giosetti@linux:~ > vsound -f output.wav realplay input.rm About to start the application. The output will not be available until the application exits. Missing file ./vsound2345.au. This means that the libvsound wrapper did not work correctlty. Here are some the possible reasons : - You are trying to record a stream (RTSP or PNM protocol) from the internet. You will need to use the --timing option. - The program you are trying to run is setuid. You will need to run vsound as root. - Vsound was not properly installed and hence won't work at all. giosetti@linux:~ > DAnke für Tips, Jost
hallo alle ich habe ein aehnliches problem wie jost bei mir startet allerdings der realplayer und beginnt auch musik wieder zugeben und die fehlermeldung kommt trotzdem woran liegt es? unten die fehlermeldung gruß flo flo@devil:~ > vsound -t realplay http://hr-xxl.unit.net/real.cfm About to start the application. The output will not be available until the application exits. Missing file ./vsound2422.au. This means that the libvsound wrapper did not work correctlty. Here are some the possible reasons : - You are trying to record a stream (RTSP or PNM protocol) from the internet. You will need to use the --timing option. - The program you are trying to run is setuid. You will need to run vsound as root. - Vsound was not properly installed and hence won't work at all. Am Mittwoch, 20. März 2002 22:48 schrieb Jost Ammon:
Hallo Kai,
Mit welchem Prog kann ich REal Audio Dateien, also in Real Audio Fromat, aufnehmen (ambesten graph. Oberfläche oder aber idioteneinfache Konsolenbedienung)?
achso, du wolltest das ganze andersrum. Ok, dein Problem ist wohl, dass du die empfangenen Daten nicht speichern kannst, da der Realplayer das nicht anbietet. Wenn du dich über die Rechtslage informiert hast, kann ich dir VSOUND (http://www.zip.com.au/~erikd/vsound/) empfehlen.
Die Installation ging ok, jetzt komme ich aber hier nicht richtig weiter (s.u.) bei der Aufnahme von "ra" bzw "G2" Formaten.
Wo liegt jetzt das Problem - daß die datei ./vsound2345.au fehlt oder daß ich die Timing Option angebe, oder beides? Und wie rufe ich die Timing Option auf - mir ist in der Doku nichts aufgefallen.
Real Audio bringt diese Fehlermeldung: Invalid protocol specified in the URL.Url should usually start with "rtsp://" or "pnm://" or "http://" input rm
und die Shell diese:
giosetti@linux:~ > vsound -f output.wav realplay input.rm About to start the application. The output will not be available until the application exits. Missing file ./vsound2345.au. This means that the libvsound wrapper did not work correctlty. Here are some the possible reasons : - You are trying to record a stream (RTSP or PNM protocol) from the internet. You will need to use the --timing option. - The program you are trying to run is setuid. You will need to run vsound as root. - Vsound was not properly installed and hence won't work at all. giosetti@linux:~ >
DAnke für Tips,
Jost
Am Freitag, 22. März 2002 17:39 schrieb flo: hallo flo,
flo@devil:~ > vsound -t realplay http://hr-xxl.unit.net/real.cfm About to start the application. - The program you are trying to run is setuid. You will need to run vsound as root.
Sagt es dasselbe als root? Wenn ja, weiß ich auch nicht weiter... Gruß Kai
participants (3)
-
flo.knell@t-online.de
-
Jost Ammon
-
Kai Lindenberg