Weil folgendes Meldung handelt um 3Com 3CRSHPW_96 soll es auch für deine Karte funktioneren. In Schritt 5 muss du "3CRSHPW_96" ins "3CRWE62092B" ändern, und auch die korrekte manfid schreiben. (Du findest es mit "cardctl ident" als root). Es war diese Wochenende an der Atmelliste gepostet: [Atmelwlandriver-users] 3Com 3CRSHPW_96 & SuSE 8.0 done! Från: "Konrad Mathieu" Till: Datum: Sat, 7 Dec 2002 14:15:55 +0100 To set up the card under SuSE 8.0 do as follows: 1. check whether kernel sources are installed, if not: install them (could use yast for that) 2. cp /boot/vmlinuz.version.h /lib/modules/2.4.18-4GB/build/include/linux/version.h (that's one command, 2.4.18GB might be different on your system, check with uname -r) 3. download latest driver from Sourceforge, untar (tar xfvz) and alter src/Pcmcia_Pci/fastvnet_cs.o according to the mailarchives[1] or download from [2](readily patched) 4. compile driver, if everything goes well, a file named pcmf502r3.o will appear in /lib/modules/2.4.28-4GB/pcmcia/ 5. alter /etc/pcmcia/config and /etc/pcmcia/wlan-ng.conf. In both files add: card "3CRSHPW_96 Wireless Lan PC Card" manfid 0x0101, 0x696 bind "pcmf502r3" 6. run lvnet and adjust, usually only preambel needs to be set to (1) for "short". When settings are correct, you should see "Associated" under "Driver State". 7. Set up the network ("ifconfig eth0 [ip-address] netmask [the netmask] up" does that, check yast for making the settings permanent) For further reference, check [1]http://sourceforge.net/mailarchive/forum.php?forum_id=11300 readily patched driver [2]http://sevdalia.hajvan.net/~hajvan/atmel/ (has ending tar.tar, needs to be renamed to tar.bz2 and untared with tar xvjf) What I havn't found yet is a way to make the settings in lvnet permanent. If anyone can give me a hint on that it would be greatly appreciated. Cheers, Konrad ...working on a Microsoft-Free world ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Atmelwlandriver-users mailing list Atmelwlandriver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/atmelwlandriver-users torsdagen den 5 december 2002 12.25 skrev linux@lost-online.de:

hallo, mein problem ist wie richte ich auf meinem laptop (suse8.1) diese karte ein? 3COM 3CRWE62092B XJack Wireless PCMCIA Card

habe zwar mittlerweile rausgefunden dass sie eine ATMEL karte ist, aber wie ich dann den treiber kompilier und so weiter ist mir als linux-neuling unbekannt....

wer das schon mal gemacht hat oder am besten eine anleitung hat.. schreibt was das zeug haelt ;-)

mfg, Tobias Bauer

-- !++ ! Lennart Börjeson ! Partner, Developer ! Cinnober Financial Technology AB ! Industrigatan 2A ! S-112 46 STOCKHOLM ! Sverige/Sweden/Schweden/Suède ! mailto:Lennart.Borjeson@cinnober.com ! phone:+46-8-50304700 ! fax:+46-8-50304701 ! http://www.cinnober.com !--