Moin ihrs, ... mal eine ganz allgemeine Frage: Um meinen zwei Problemen des mittlerweile gemischten Kabelsalates mit French Dressing und dem Problem mit dem LPT1 Herr zu werden, denke ich daran, mir evtl. einen Port Replicator für den USB Anschluss zuzulegen. Wie sind eure Erfahrungen mit so einem Teil? Funktioniert alles, was ich daran anschliesse? Muss ich alles umkonfigurieren, eventuell gar ein zweites Hardwareprofil anlegen? Kann ich insbesondere vielleicht den parallelen Drucker da dran flanschen und eben dann per USB "Missbrauch" benutzen? Gibt es etwas zu beachten? Funktionieren bestimmte Hersteller/Modelle nur teilweise, nicht, schlecht oder super klasse? Wer hat sowas und kann mir vielleicht ein paar Tips geben? Meine Hardware: Acer Travelmate 621LV Merci schonmal. :-) -- cul8er, Paul paul.foerster@gmx.net
On Tue, Jan 13, 2004 at 11:28:12PM +0100, Paul Foerster wrote: Hallo Paul, ...
Um meinen zwei Problemen des mittlerweile gemischten Kabelsalates mit French Dressing und dem Problem mit dem LPT1 Herr zu werden, denke ich daran, mir evtl. einen Port Replicator für den USB Anschluss zuzulegen.
gerade habe ich so ein Geraet kurz ausprobieren koennen. Ich werde eine Beschreibung in den Linux-Mobile-Guide http://tuxmobil.org/howtos.html aufnehmen. Hier ist mein erster Entwurf. Gruesse Werner Typhoon USB 2.0 7in1 Docking Station made by Anubis P/N 83057, actually this device should be named port replicator, because it does not have any extension slots. How does it work with Linux: - USB 2.0 A-type downstream: works with external harddisk and mouse out of the box - USB 2.0 A-type downstream: see above - PS/2 keyboard: works out of the box - PS/2 mouse: works, but I haven't found the right protocol to make the mouse behave proper neither in console or X11, after a second insertion the mouse doesn't move anymore, port /dev/psaux was assigned, I have taken a Logitech mouse, which usually works on the PS/2 port of my laptop in parallel with the trackpoint (both assigned to the /dev/psaux and the PS/2 mouse protocol for X11). So maybe the problem is not the protocol, but that there are now three different PS/2 ports, I have to check the HID USB driver, too. - serial port: tested with serial mouse, doesn't seem to work, /dev/ttyUSB0 was assigned· - parallel port: tested, device /dev/usb/usblp0 assigned, works with HP LaserJet 2100 - LAN: usbnet loads, device eth1 was assigned, ifconfig or pump configures the network device, - transfer port: (USB 1.1 host link B-type) untested Tested with USB 1.1 laptop and custom made kernel 2.6.1. This device doesn't have a VGA port to connect to an external display. Only a few USB docking stations have this feature. It would be nice to get a report whether a VGA port works or not. Here is the output of `dmesg': hub 1-0:1.0: new USB device on port 1, assigned address 26 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected hub 1-1:1.0: new USB device on port 3, assigned address 27 hub 1-1.3:1.0: USB hub found hub 1-1.3:1.0: 4 ports detected hub 1-1:1.0: new USB device on port 4, assigned address 28 eth1: register usbnet at usb-0000:00:07.2-1.4, ASIX AX8817x USB 2.0 Ethernet hub 1-1.3:1.0: new USB device on port 1, assigned address 29 usb0: register usbnet at usb-0000:00:07.2-1.3.1, Prolific PL-2301/PL-2302 hub 1-1.3:1.0: new USB device on port 2, assigned address 30 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 30 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 hub 1-1.3:1.0: new USB device on port 3, assigned address 31 pl2303 1-1.3.3:1.0: PL-2303 converter detected usb 1-1.3.3: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) hub 1-1.3:1.0: new USB device on port 4, assigned address 32 HID device not claimed by input or hiddev hid: probe of 1-1.3.4:1.0 failed with error -5 input: Composite USB PS2 Converter USB to PS2 Adaptor v1.09 on usb-0000:00:07.2-1.3.4 HID device not claimed by input or hiddev hid: probe of 1-1.3.4:1.1 failed with error -5 input: Composite USB PS2 Converter USB to PS2 Adaptor v1.09 on usb-0000:00:07.2-1.3.4 -- |=| Werner Heuser = Berliner Str. 122 = D-13187 Berlin = Germany |=| <wehe at tuxmobil.org> T. 0049 - (0)30 - 349 53 86 |=| http://TuxMobil.org UniX on Mobile Systems: HOWTOs,Software |*| This is no time for phony rhetoric -- Lou Reed
Hi Werner,
gerade habe ich so ein Geraet kurz ausprobieren koennen. Ich werde eine Beschreibung in den Linux-Mobile-Guide http://tuxmobil.org/howtos.html aufnehmen. Hier ist mein erster Entwurf. Typhoon USB 2.0 7in1 Docking Station made by Anubis P/N 83057, actually this device should be named port replicator, because it does not have any extension slots. How does it work with Linux:
... mega-cool! Merci viumau! :-) :-) :-)
- PS/2 mouse: works, but I haven't found the right protocol to make [..] port /dev/psaux was assigned,
... örgs. Das darf nicht sein. /dev/psaux brauche ich für mein Touchpad!
- parallel port: tested, device /dev/usb/usblp0 assigned, works with HP LaserJet 2100
... na, das ist doch was! Genau DAS wäre nämlich der Grund, mir so ein Teil zu kaufen. Merci für den Test. :-) -- cul8er, Paul paul.foerster@gmx.net
On Fri, Jan 16, 2004 at 10:12:11PM +0100, Paul Foerster wrote: Hallo Paul, ...
- PS/2 mouse: works, but I haven't found the right protocol to make [..] port /dev/psaux was assigned,
... örgs. Das darf nicht sein. /dev/psaux brauche ich für mein Touchpad! ...
ein externes PS/2 TouchPad? Wenn Du stattdessen ein USB Geraet nehmen kannst, sollte das funktionieren. Werner -- |=| Werner Heuser = Berliner Str. 122 = D-13187 Berlin = Germany |=| <wehe at tuxmobil.org> T. 0049 - (0)30 - 349 53 86 |=| http://TuxMobil.org UniX on Mobile Systems: HOWTOs,Software |*| This is no time for phony rhetoric -- Lou Reed
Hi Werner,
ein externes PS/2 TouchPad? Wenn Du stattdessen ein USB Geraet nehmen kannst, sollte das funktionieren.
... nein, ein internes, eben das normale Touchpad. Ich benutze auf dem TM621LV aber den X Server von XiG und der hat das Dingen als /dev/psaux geführt. Bevor ich den XiG Server hatte, also noch Xfree86 benutzt hatte, war das aber auch schon so. Ich habe keine Ahnung, warum hier das Dingen auf /dev/psaux liegt, aber so funktioniert es jedenfalls. Und das darf mir ein Port-Replicator nicht kaputt machen! -- cul8er, Paul paul.foerster@gmx.net
On Sat, Jan 17, 2004 at 04:07:52PM +0100, Paul Foerster wrote: Hallo Paul, ...
Ich habe keine Ahnung, warum hier das Dingen auf /dev/psaux liegt, aber so funktioniert es jedenfalls. Und das darf mir ein Port-Replicator nicht kaputt machen!
das tut der von mir beschriebene auch nicht. Das interne psaux Device funktioniert weiter. Nur eine an den PS/2 Anschluss des Port Replicators angeschlossene Maus habe ich noch nicht richtig ans Rennen bekommen. Aber wie gesagt eine USB Maus funktioniert gut. Gruesse Werner -- |=| Werner Heuser = Berliner Str. 122 = D-13187 Berlin = Germany |=| <wehe at tuxmobil.org> T. 0049 - (0)30 - 349 53 86 |=| http://TuxMobil.org UniX on Mobile Systems: HOWTOs,Software |*| This is no time for phony rhetoric -- Lou Reed
Hi Werner,
das tut der von mir beschriebene auch nicht. Das interne psaux Device funktioniert weiter. Nur eine an den PS/2 Anschluss des Port Replicators angeschlossene Maus habe ich noch nicht richtig ans Rennen bekommen. Aber wie gesagt eine USB Maus funktioniert gut.
... gut, dann kann ich damit leben. Eine PS/2 Maus brauche ich eh nicht. Die Wahrscheinlichkeit, dass ich den PS/2 Port für _irgendetwas_ brauche, ist sowieso Null. Insofern ist das kein Problem. Merci nochmal fürs Feedback. :-) -- cul8er, Paul paul.foerster@gmx.net
participants (2)
-
Paul Foerster
-
Werner Heuser