Dialin-Server mit 4 Fritz!Card PCI auf SuSE 6.4
Hallo Liste. Ich habe hier eine Linuxbox (Suse 6.4) mit Squidlaufen. Folgende Hardwarekonfiguration: 4 Fritz!Card PCI 1 3Com 509B Squid läuft einwandfrei wenn ich mich vom internen Netzwerk über eine der ISDN - Karten bei meinem Provider einwähle. Jetzt möchte ich das Ganze aber umkehren: Einwahl von interner ISDN - Anlage über Fritz!Card -> Sqid -> 3Com 509B -> Kabelmodem -> ISP Die Einwahl über Kabelmodem auf der Linuxbox funktioniert einwandfrei. Jedoch bekomme ich in /var/log/messages folgende Fehlermeldung wenn ich mich von einem Win98 Rechner im internen Neztwerk aufder Linuxbox einwählen möchte: Jun 30 11:59:57 proxy kernel: isdn_tty: call from 14 -> 15 ignored Jun 30 11:59:57 proxy isdnlog: (HiSax driver detected) Jun 30 11:59:57 proxy isdnlog: Jun 30 11:59:57 * Call to tei 127 from +43 544614, on +43 544615, RING (3.1 kHz audio) Jun 30 12:00:01 proxy kernel: isdn_tty: call from 14 -> 15 ignored Jun 30 12:00:21 proxy kernel: isdn_tty: call from 14 -> 15 ignored Jun 30 12:00:21 proxy isdnlog: Jun 30 12:00:21 * Call to tei 127 from +43 544614, on +43 544615, RING (3.1 kHz audio) Jun 30 12:00:25 proxy kernel: isdn_tty: call from 14 -> 15 ignored Am Win98 Client bekomme ich folgende Fehlermeldung: Der Anschluß ist derzeit besetzt. Bitte versuchen Sie es später nochmals. Der Windows-Rechner befindet sich auf Nebenstelle 14. Der Einwahlserver befindet sich auf Nebenstelle 15 Die FAQ's von isdn4linux sagen folgendes:
There are two possible explanations. Either your own MSN (here: YYY) is not correctly set with "isdnctrl eaz interface YYY".
Die eigene MSN habe ich in YAST mit 15 festgelegt.
Or "isdnctrl secure interface on" was set, without allowing calls from the incoming number (here: XXX) with "isdnctrl addphone interface in XXX".
Hier habe ich in YAST 14 angegeben als Nummer die Einwählen darf. Jedoch habe ich die Funktion "Nur angegebene Nummern dürfen anrufen" deaktiviert. Somit dürfte "isdnctrl secure interface on" nicht gesetzt sein. Beim startup werden alle IPPP-Devices (ippp0 _1 _2 _3) ohne besondere Fehlermeldungen initialisiert. Hier noch ein Auszug aus /var/log/messages: Jun 30 11:55:10 proxy kernel: ISDN subsystem Rev: 1.97/1.82/1.103/1.61/1.17/1.3 loaded Jun 30 11:55:10 proxy kernel: HiSax: Linux Driver for passive ISDN cards Jun 30 11:55:10 proxy kernel: HiSax: Version 3.3d (module) Jun 30 11:55:10 proxy kernel: HiSax: Layer1 Revision 2.37 Jun 30 11:55:10 proxy kernel: HiSax: Layer2 Revision 2.20 Jun 30 11:55:10 proxy kernel: HiSax: TeiMgr Revision 2.13 Jun 30 11:55:10 proxy kernel: HiSax: Layer3 Revision 2.10 Jun 30 11:55:10 proxy kernel: HiSax: LinkLayer Revision 2.40 Jun 30 11:55:10 proxy kernel: HiSax: Approval certification valid Jun 30 11:55:10 proxy kernel: HiSax: Approved with ELSA Quickstep series cards Jun 30 11:55:10 proxy kernel: HiSax: Approval registration numbers: Jun 30 11:55:10 proxy kernel: HiSax: German D133361J CETECOM ICT Services GmbH Jun 30 11:55:10 proxy kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH Jun 30 11:55:10 proxy kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Jun 30 11:55:10 proxy kernel: HiSax: Total 1 card defined Jun 30 11:55:10 proxy kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) Jun 30 11:55:10 proxy kernel: HiSax: AVM PCI driver Rev. 1.14 Jun 30 11:55:10 proxy kernel: AVM PCI: stat 0x3020a Jun 30 11:55:10 proxy kernel: AVM PCI: Class A Rev 2 Jun 30 11:55:10 proxy kernel: HiSax: AVM Fritz!PCI config irq:11 base:0xD800 Jun 30 11:55:10 proxy kernel: AVM PCI: ISAC version (0): 2086/2186 V1.1 Jun 30 11:55:10 proxy kernel: AVM Fritz PnP/PCI: IRQ 11 count 0 Jun 30 11:55:10 proxy kernel: AVM Fritz PnP/PCI: IRQ 11 count 3 Jun 30 11:55:10 proxy kernel: HiSax: DSS1 Rev. 2.22 Jun 30 11:55:10 proxy kernel: HiSax: 2 channels added Jun 30 11:55:10 proxy kernel: HiSax: MAX_WAITING_CALLS added Jun 30 11:55:10 proxy kernel: HiSax: debugging flags card 1 set to 4 Jun 30 11:55:10 proxy kernel: ippp, open, slot: 0, minor: 0, state: 0000 Jun 30 11:55:10 proxy kernel: ippp_ccp: allocated reset data structure c3f5c800 Jun 30 11:55:10 proxy kernel: ippp, open, slot: 1, minor: 1, state: 0000 Jun 30 11:55:10 proxy kernel: ippp_ccp: allocated reset data structure c3323000 Jun 30 11:55:10 proxy kernel: ippp, open, slot: 2, minor: 2, state: 0000 Jun 30 11:55:10 proxy kernel: ippp_ccp: allocated reset data structure c322e800 Jun 30 11:55:10 proxy kernel: ippp, open, slot: 3, minor: 3, state: 0000 Jun 30 11:55:10 proxy kernel: ippp_ccp: allocated reset data structure c3322800 Bin für jeden Tip dankbar. ... Josef -- Software- und Internetsupport Schauer Tel.:+43 676 4304414 Nasserein 506a/5 Fax.:+43 5446 2375 A-6580 St.Anton am Arlberg mail.: office.sis@aon.at
Josef Schauer wrote:
Jun 30 11:59:57 proxy kernel: isdn_tty: call from 14 -> 15 ignored Jun 30 11:59:57 proxy isdnlog: (HiSax driver detected) Jun 30 11:59:57 proxy isdnlog: Jun 30 11:59:57 * Call to tei 127 from +43 544614, on +43 544615, RING (3.1 kHz audio) Jun 30 12:00:01 proxy kernel: isdn_tty: call from 14 -> 15 ignored Jun 30 12:00:21 proxy kernel: isdn_tty: call from 14 -> 15 ignored Jun 30 12:00:21 proxy isdnlog: Jun 30 12:00:21 * Call to tei 127 from +43 544614, on +43 544615, RING (3.1 kHz audio) Jun 30 12:00:25 proxy kernel: isdn_tty: call from 14 -> 15 ignored
Ich wuerde das so interpretieren: Der Windows-Rechner waehlt mit einem analogen Modem und der Proxy hat nur eine ISDN-Karte. Das geht nicht. Loesung: entweder Windows-Rechner mit ISDN-Karte oder Proxy mit Modem ausstatten. Jochen
participants (2)
-
Jochen Roedenbeck
-
Josef Schauer