Probleme mit BlueFRITZ!
Hi, ich habe einige Probleme mit meinem BlueFRITZ!-Adapter. Unter SuSE 9.0 hat alles perfekt funktioniert, doch jetzt baut er keine Internetverbindung auf. Ich habe auch schon folgende Anleitung zu Rate gezogen: http://portal.suse.com/sdb/de/2004/04/bluefritz9_1.html capiinfo liefert nun folgende Ausgabe: [07:09:31] sebastian@PC5:~> capiinfo Number of Controllers : 1 Controller 1: Manufacturer: AVM Berlin CAPI Version: 2.0 Manufacturer Version: 3.101-04 (49.20) Serial Number: 0280113 BChannels: 2 Global Options: 0x00000031 internal controller supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0xc000000f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing B2 protocols support: 0x00000b0b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x8000000f Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE 0100 0200 31000000 0f0000c0 0b0b0000 0f000080 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00020000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS kisdnwatch läuft auch ohne Probleme, aber wenn ich mich mittels kinternet oder cinternet -i ippp0 -p T-Online --start einwählen will, kommt nach kurzer Zeit in der /var/log/messages folgender Eintrag: May 3 07:03:23 PC5 ipppd[5374]: Found 1 device: May 3 07:03:23 PC5 ipppd[5375]: ipppd i2.2.12 (isdn4linux version of pppd by MH) started May 3 07:03:23 PC5 ipppd[5375]: init_unit: 0 May 3 07:03:23 PC5 kernel: ippp, open, slot: 0, minor: 0, state: 0000 May 3 07:03:23 PC5 kernel: ippp_ccp: allocated reset data structure d4339000 May 3 07:03:23 PC5 ipppd[5375]: Connect[0]: /dev/ippp0, fd: 9 May 3 07:03:23 PC5 kernel: ippp0: dialing 1 00191011... May 3 07:03:23 PC5 kernel: cmtp_send_message: Can't find application with id 1 May 3 07:03:32 PC5 kernel: isdn_net: local hangup ippp0 May 3 07:03:32 PC5 kernel: capidrv-1: chan 0 disconnect request while waiting for CONNECT_CONF May 3 07:03:32 PC5 kernel: ippp0: Chargesum is 0 Weiß irgendjemand Abhilfe? Tschau Sebastian
On Tue, May 04, 2004 at 06:21:40PM +0200, Sebastian Gibb wrote:
Hi, ich habe einige Probleme mit meinem BlueFRITZ!-Adapter. Unter SuSE 9.0 hat alles perfekt funktioniert, doch jetzt baut er keine Internetverbindung auf.
Ich habe auch schon folgende Anleitung zu Rate gezogen: http://portal.suse.com/sdb/de/2004/04/bluefritz9_1.html ...
kisdnwatch läuft auch ohne Probleme, aber wenn ich mich mittels kinternet oder cinternet -i ippp0 -p T-Online --start einwählen will, kommt nach kurzer Zeit in der /var/log/messages folgender Eintrag:
May 3 07:03:23 PC5 ipppd[5374]: Found 1 device: May 3 07:03:23 PC5 ipppd[5375]: ipppd i2.2.12 (isdn4linux version of pppd by MH) started May 3 07:03:23 PC5 ipppd[5375]: init_unit: 0 May 3 07:03:23 PC5 kernel: ippp, open, slot: 0, minor: 0, state: 0000 May 3 07:03:23 PC5 kernel: ippp_ccp: allocated reset data structure d4339000 May 3 07:03:23 PC5 ipppd[5375]: Connect[0]: /dev/ippp0, fd: 9 May 3 07:03:23 PC5 kernel: ippp0: dialing 1 00191011... May 3 07:03:23 PC5 kernel: cmtp_send_message: Can't find application with id 1 May 3 07:03:32 PC5 kernel: isdn_net: local hangup ippp0 May 3 07:03:32 PC5 kernel: capidrv-1: chan 0 disconnect request while waiting for CONNECT_CONF May 3 07:03:32 PC5 kernel: ippp0: Chargesum is 0
Das sollte eigentlich genau durch das zusaetzliche Script gefixt werden. Problem ist, das capidrv erst geladen werden darf, nachdem die CIP Verbindung steht. Manuell sollte das so zu erreichen sein: ciptool release ifdown ippp0 killall isdnlog rcsmpppd stop rmmod capidrv isdn ciptool search modprobe capidrv ifup ippp0 rcsmpppd restart -- Karsten Keil SuSE Labs ISDN development
Karsten Keil schrieb:
On Tue, May 04, 2004 at 06:21:40PM +0200, Sebastian Gibb wrote:
Hi, ich habe einige Probleme mit meinem BlueFRITZ!-Adapter. Unter SuSE 9.0 hat alles perfekt funktioniert, doch jetzt baut er keine Internetverbindung auf.
Ich habe auch schon folgende Anleitung zu Rate gezogen: http://portal.suse.com/sdb/de/2004/04/bluefritz9_1.html
...
kisdnwatch läuft auch ohne Probleme, aber wenn ich mich mittels kinternet oder cinternet -i ippp0 -p T-Online --start einwählen will, kommt nach kurzer Zeit in der /var/log/messages folgender Eintrag:
May 3 07:03:23 PC5 ipppd[5374]: Found 1 device: May 3 07:03:23 PC5 ipppd[5375]: ipppd i2.2.12 (isdn4linux version of pppd by MH) started May 3 07:03:23 PC5 ipppd[5375]: init_unit: 0 May 3 07:03:23 PC5 kernel: ippp, open, slot: 0, minor: 0, state: 0000 May 3 07:03:23 PC5 kernel: ippp_ccp: allocated reset data structure d4339000 May 3 07:03:23 PC5 ipppd[5375]: Connect[0]: /dev/ippp0, fd: 9 May 3 07:03:23 PC5 kernel: ippp0: dialing 1 00191011... May 3 07:03:23 PC5 kernel: cmtp_send_message: Can't find application with id 1 May 3 07:03:32 PC5 kernel: isdn_net: local hangup ippp0 May 3 07:03:32 PC5 kernel: capidrv-1: chan 0 disconnect request while waiting for CONNECT_CONF May 3 07:03:32 PC5 kernel: ippp0: Chargesum is 0
Das sollte eigentlich genau durch das zusaetzliche Script gefixt werden. Problem ist, das capidrv erst geladen werden darf, nachdem die CIP Verbindung steht.
Manuell sollte das so zu erreichen sein:
ciptool release ifdown ippp0 killall isdnlog rcsmpppd stop rmmod capidrv isdn ciptool search modprobe capidrv ifup ippp0 rcsmpppd restart
Super, manuell funktioniert es prima. Wie kann ich es einrichten, dass es möglichst auch ohne manuelles Zutun gelingt? Tschau Sebastian
Hi, ich habe das Script wie folgt abgeändert: #! /bin/sh # Copyright (c) 2001-2002 SuSE Linux AG Nuernberg. All rights reserved. # # /etc/init.d/bluefritz # # description: init script for bluefritz connecting ### BEGIN INIT INFO # Provides: bluefritz # Required-Start: $All # Required-Stop: # Default-Start: 3 5 # Default-Stop: # Description: start the bluefritz connecting ### END INIT INFO . /etc/rc.status rc_reset # See how we were called. case "$1" in start) /sbin/ifdown ippp0 /usr/sbin/rcsmpppd stop /usr/bin/killall isdnlog /sbin/rmmod capidrv isdn /usr/bin/ciptool connect ADRESSE_DES_BLUETOOTH_ACCESS_POINT # Warten, damit capidrv erst nach dem Aufbau der Verbindung # geladen wird /bin/sleep 5 /sbin/modprobe capidrv /sbin/ifup ippp0 /usr/sbin/rcsmpppd start ;; stop) ;; *) echo "Usage: $0 start" exit 1 esac rc_exit Jetzt funktioniert es bei mir auch beim Booten. Ich weiß nicht, ob es so besonders toll ist, aber es funktioniert. Tschau Sebastian
participants (2)
-
Karsten Keil
-
sebastiangibb@t-online.de