On Thu, Jan 30, 2003 at 03:59:38PM +0100, sabrinawinkelmann@de-facto.de wrote: ...

Vielen Dank für die Antwort. Der Server vom Provider lehnt die IP nicht ab und weist die 'remote IP' zu, was korrekt läuft. Die Verbindung bleibt auch, nur können natürlich keine Pakete geroutet werden. Ich füge die messages nochmal kompletter bei und würde mich freuen, wenn Du da nochmal drauf schauen könntest.

Jan 9 18:50:29 hahnfire pppd[2643]: Plugin pppoe.so loaded. Jan 9 18:50:29 hahnfire pppd[2643]: PPPoE Plugin Initialized Jan 9 18:50:29 hahnfire pppd[2643]: Plugin passwordfd.so loaded. Jan 9 18:50:29 hahnfire pppd[2643]: pppd 2.4.1 started by root, uid 0 Jan 9 18:50:30 hahnfire pppd[2643]: Using interface ppp0 Jan 9 18:50:30 hahnfire pppd[2643]: Couldn't increase MTU to 1500. Jan 9 18:50:30 hahnfire pppd[2643]: Setting MTU to 1492. Jan 9 18:50:30 hahnfire pppd[2643]: Couldn't increase MRU to 1500 Jan 9 18:50:30 hahnfire pppd[2643]: replacing old default route to eth1 [192.168.199.1] Jan 9 18:50:30 hahnfire pppd[2643]: local IP address 192.168.198.1 Jan 9 18:50:30 hahnfire pppd[2643]: remote IP address 192.168.198.99 Jan 9 18:50:40 hahnfire pppd[2643]: Starting link Jan 9 18:50:40 hahnfire pppd[2643]: Sending PADI Jan 9 18:50:40 hahnfire pppd[2643]: HOST_UNIQ successful match Jan 9 18:50:41 hahnfire pppd[2643]: HOST_UNIQ successful match Jan 9 18:50:41 hahnfire pppd[2643]: Got connection: 2a8 Jan 9 18:50:41 hahnfire pppd[2643]: Connecting PPPoE socket: 00:0a:41:d5:9e:30 a802 eth1 0x8086748 Jan 9 18:50:41 hahnfire pppd[2643]: using channel 2 Jan 9 18:50:41 hahnfire pppd[2643]: Connect: ppp0 <--> eth1 Jan 9 18:50:41 hahnfire pppd[2643]: Couldn't increase MTU to 1500.

Jan 9 18:50:41 hahnfire pppd[2643]: Setting MTU to 1492. Jan 9 18:50:41 hahnfire pppd[2643]: sent [LCP EchoReq id=0x0 magic=0xf0ed28bc] Jan 9 18:50:41 hahnfire pppd[2643]: cbcp_lowerup Jan 9 18:50:41 hahnfire pppd[2643]: want: 2 Jan 9 18:50:41 hahnfire pppd[2643]: rcvd [CHAP Challenge id=0xa <5f8aaccc2877b5d328d904fa104b6d96>, name = "air-it"] 00 00 00 00 00 00 00 00 00 00 00 Jan 9 18:50:41 hahnfire pppd[2643]: sent [CHAP Response id=0xa <7eef3277a2fbe8ca6f73db03c5367a77>, name = "RPTxxx00"] Jan 9 18:50:41 hahnfire pppd[2643]: rcvd [LCP EchoRep id=0x0 magic=0x4e095e27] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jan 9 18:50:41 hahnfire pppd[2643]: rcvd [CHAP Success id=0xa ""] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... Jan 9 18:50:41 hahnfire pppd[2643]: sent [IPCP ConfReq id=0x1 ] Jan 9 18:50:41 hahnfire pppd[2643]: rcvd [IPCP ConfReq id=0x1 ] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jan 9 18:50:41 hahnfire pppd[2643]: sent [IPCP ConfAck id=0x1 ] Jan 9 18:50:41 hahnfire pppd[2643]: rcvd [IPCP ConfRej id=0x1 ] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Jan 9 18:50:41 hahnfire pppd[2643]: sent [IPCP ConfReq id=0x2 ] Jan 9 18:50:41 hahnfire pppd[2643]: rcvd [IPCP ConfNak id=0x2 ] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Und genau hier muesste vom Provider auch addr vorgeschlagen werden, wenn er die 192.168.198.1 nicht mag. Macht er nicht ---> da kann der ppp nur diese nehmen.

Jan 9 18:50:41 hahnfire pppd[2643]: sent [IPCP ConfReq id=0x3 ] Jan 9 18:50:41 hahnfire pppd[2643]: rcvd [IPCP ConfAck id=0x3 ] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Und hier wird sie auch nochmal vom Provider bestaetigt. Warum das mit einer 8.1 anders funktionieren soll, kann ich nicht verstehen, ich sehe keinerlei Fehler auf Deiner Seite.

Jan 9 18:50:41 hahnfire pppd[2643]: Remote IP address changed to 194.25.170.235

Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 194.25.170.235 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.199.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.110.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.3.1.0 10.110.100.1 255.255.255.0 UG 0 0 0 eth0 0.0.0.0 194.25.170.235 0.0.0.0 UG 0 0 0 ppp0

Aber leider:

ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.198.1 P-t-P:192.168.198.99 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

Danke, wenn Du Dir das alles durchgelesen hast :-))

Gruss Sabrina

-- Karsten Keil SuSE Labs ISDN development