Hallo Jetzt wo Karsten seinen Urlaub beendet hat (durfe er eigentlich so lange weg?) stelle ich meine Frage noch mal. Übrigens ein gesundes neues Jahr wünsche ich allen Listenlesern und Helfern. Ich habe bei einem Freund von mir eine Suse 8.2 aufgesetzt. Die Konfiguration verlief auch problemlos nur bekommt er keine Verbindung zum Inet. Wie gesagt er nutzt eine Teledat 2 a/b per USB. Das Modul ist geladen: linux:/home/jan # lsmod | grep fxusb fxusb_CZ 560408 2 kernelcapi 30080 4 [fxusb_CZ capidrv capi] usbcore 63116 1 [usbserial fxusb_CZ usb-uhci ehci-hcd] Das laden von Capi sieht auch ganz gut aus: Dec 18 18:26:05 linux smpppd[959]: smpppd version 1.00 started Dec 18 18:26:08 linux kernel: IPv6 v0.8 for NET4.0 Dec 18 18:26:08 linux kernel: IPv6 over IPv4 tunneling driver Dec 18 18:26:08 linux sshd[1096]: Server listening on :: port 22. Dec 18 18:26:09 linux kernel: CAPI-driver Rev 1.1.4.1: loaded Dec 18 18:26:09 linux kernel: capifs: Rev 1.1.4.1 Dec 18 18:26:09 linux kernel: capi20: started up with major 68 Dec 18 18:26:09 linux kernel: kcapi: capi20 attached Dec 18 18:26:09 linux kernel: capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs) Dec 18 18:26:09 linux kernel: CSLIP: code copyright 1989 Regents of the University of California Dec 18 18:26:10 linux kernel: ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded Dec 18 18:26:10 linux kernel: kcapi: capidrv attached Dec 18 18:26:10 linux kernel: kcapi: appl 1 up Dec 18 18:26:10 linux kernel: capidrv: Rev 1.1.4.1: loaded Dec 18 18:26:10 linux kernel: fxusb_CZ: AVM FRITZ!X USB OEM driver, revision 0.2 Dec 18 18:26:10 linux kernel: fxusb_CZ: (fxusb_CZ built on Mar 17 2003 at 18:53:51) Dec 18 18:26:10 linux kernel: fxusb_CZ: Loading... Dec 18 18:26:10 linux kernel: kcapi: driver fxusb_CZ attached Dec 18 18:26:10 linux kernel: usb.c: registered new driver fxusb_CZ Dec 18 18:26:10 linux kernel: fxusb: WARNG: Driver and stack name do not match! Dec 18 18:26:10 linux kernel: fxusb: Driver 'fxusb_CZ' attached to stack Dec 18 18:26:10 linux kernel: fxusb_CZ: Stack version 3.10-02 Dec 18 18:26:10 linux kernel: kcapi: Controller 1: fritz-usb attached Dec 18 18:26:10 linux kernel: kcapi: card 1 "fritz-usb" ready. Dec 18 18:26:10 linux kernel: fxusb_CZ: Loaded. Dec 18 18:26:10 linux kernel: kcapi: notify up contr 1 Dec 18 18:26:10 linux kernel: capidrv: controller 1 up Dec 18 18:26:10 linux kernel: capidrv-1: now up (2 B channels) Dec 18 18:26:10 linux kernel: capidrv-1: D2 trace enabled Dec 18 18:26:10 linux kernel: capi: controller 1 up Dec 18 18:26:11 linux isdnlog: isdnlog Version 4.64 starting Dec 18 18:26:11 linux isdnlog: Holiday Version 1.10-Germany [12-Apr-1999] loaded [11 entries from /usr/lib/isdn/holiday-de.dat] Dec 18 18:26:12 linux isdnlog: Dest V1.01: File '/usr/lib/isdn/dest.cdb' opened fine - Dest 1.0 int (+h) AT DE NL CH Dec 18 18:26:13 linux ipppd[1301]: Found 1 device: Dec 18 18:26:13 linux ipppd[1323]: ipppd i2.2.12 (isdn4linux version of pppd by MH) started Dec 18 18:26:13 linux ipppd[1323]: init_unit: 0 Dec 18 18:26:13 linux ipppd[1323]: Connect[0]: /dev/ippp0, fd: 8 Dec 18 18:26:13 linux kernel: ippp, open, slot: 0, minor: 0, state: 0000 Dec 18 18:26:13 linux kernel: ippp_ccp: allocated reset data structure c471e000 Dec 18 18:26:13 linux isdnlog: Zone V1.25: Provider 0 File '/usr/lib/isdn/zone-de-dtag.cdb' opened fine - V1.25 K2 C2 N256 T157147 O1 L5 Dec 18 18:26:13 linux isdnlog: Rates Version 3.00 [01-Sep-2002 11:27:26] loaded [61 Providers, 688 Zones, 2329 Areas, 42 Services, 364 Comments, 0 eXceptions, 6 Redirects, 1962 Rates from /usr/lib/isdn/rate-de.dat] Dec 18 18:26:13 linux isdnlog: (ISDN subsystem with ISDN_MAX_CHANNELS > 16 detected, ioctl(IIOCNETGPN) is available) Dec 18 18:26:13 linux isdnlog: isdn.conf:2 active channels, 2 MSN/SI entries Dec 18 18:26:13 linux isdnlog: (Data versions: iprofd=0x06 net_cfg=0x06 /dev/isdninfo=0x01) Dec 18 18:26:13 linux isdnlog: Everything is fine, isdnlog-4.64 is running in full featured mode. Dec 18 18:26:13 linux isdnlog: (AVM B1 driver detected (D2)) Dec 18 18:26:14 linux /usr/sbin/cron[1459]: (CRON) STARTUP (fork ok) Dec 18 18:26:17 linux /etc/hotplug/net.agent[1188]: No HW description found ... exiting Dec 18 18:26:18 linux kernel: isapnp: Scanning for PnP cards... Dec 18 18:26:18 linux kernel: isapnp: No Plug & Play device found Dec 18 18:26:32 linux kernel: Linux video capture interface: v1.00 Dec 18 18:26:36 linux kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] Dec 18 18:26:36 linux kernel: parport0: irq 7 detected Dec 18 18:26:36 linux kernel: lp0: using parport0 (polling). Dec 18 18:26:37 linux kernel: usb.c: registered new driver serial Dec 18 18:26:37 linux kernel: usbserial.c: USB Serial support registered for Generic Dec 18 18:26:37 linux kernel: usbserial.c: USB Serial Driver core v1.4 Und /var/log/messages hilft mir auch nicht so recht weiter: linux:/home/jan # tail -f /var/log/messages Dec 19 16:22:41 linux ipppd[2095]: Terminating on signal 15. Dec 19 16:22:41 linux ipppd[2095]: closing fd 16 from unit 0 Dec 19 16:22:41 linux kernel: ippp_ccp: freeing reset data structure cadf8800 Dec 19 16:22:41 linux ipppd[2095]: link 0 closed , linkunit: 0 Dec 19 16:22:41 linux ipppd[2095]: Exit. Dez 19 16:22:41 linux su: pam_unix2: session finished for user jan, service su Dez 19 16:22:42 linux su: pam_unix2: session finished for user jan, service su Dez 19 16:22:45 linux su: pam_unix2: session finished for user root, service su Dez 19 16:23:48 linux su: (to root) jan on /dev/pts/1 Dez 19 16:23:48 linux su: pam_unix2: session started for user root, service su Dec 19 16:24:34 linux ipppd[2241]: Found 1 device: Dec 19 16:24:34 linux ipppd[2242]: ipppd i2.2.12 (isdn4linux version of pppd by MH) started Dec 19 16:24:34 linux ipppd[2242]: init_unit: 0 Dec 19 16:24:34 linux kernel: ippp, open, slot: 0, minor: 0, state: 0000 Dec 19 16:24:34 linux kernel: ippp_ccp: allocated reset data structure caefd800 Dec 19 16:24:34 linux ipppd[2242]: Connect[0]: /dev/ippp0, fd: 11 Dec 19 16:24:34 linux kernel: ippp0: dialing 1 01019019231750... Dec 19 16:24:34 linux isdnlog: Dec 19 16:24:34 * tei 85 calling 019231750 with +49 35894/36793, Hähnichen RING (Data) Dec 19 16:24:42 linux kernel: isdn_net: local hangup ippp0 Dec 19 16:24:42 linux kernel: ippp0: Chargesum is 0 Dec 19 16:24:43 linux isdnlog: Dec 19 16:24:43 tei 85 calling 019231750 with +49 35894/xx793, Hähnichen Time:Fri Dec 19 16:20:00 2003 Dec 19 16:24:43 linux isdnlog: Dec 19 16:24:43 tei 85 calling 019231750 with +49 35894/xx793, Hähnichen COLP *INVALID* -- ignored! Dec 19 16:24:43 linux isdnlog: Dec 19 16:24:43 tei 85 calling 019231750 with +49 35894/xx793, Hähnichen CONNECT (Data) Dec 19 16:24:43 linux isdnlog: Dec 19 16:24:43 tei 85 calling 019231750 with +49 35894/xx793, Hähnichen No area info for provider 19_0 (4), destination 019231750 Dec 19 16:24:43 linux isdnlog: Dec 19 16:24:43 tei 85 calling 019231750 with +49 35894/xx793, Hähnichen Message not compatible with call state (User) Dec 19 16:24:43 linux kernel: capidrv-1: DISCONNECT_IND reason 0x3400 (No additional information) for plci 0x101 Dec 19 16:24:43 linux isdnlog: Dec 19 16:24:43 tei 85 calling 019231750 with +49 35894/xx793, Hähnichen HANGUP Message not compatible with call state (User) das xx ist von mir :-)) Was mir allerdings auffällt ist das in Yast2 in der ISDN Configuration unter bereits erkannte ISDN Geräte die Teledat 120X nach eienem Neustart nicht aufgeführt ist, sondern nur unbekanntes Gerät. Sollte doch aber eigentlich erkannt sein?! Kann das daran liegen, das in der /etc/capi.conf kein Eintrag für die fxusb_CZ ist? Und woran kann das wiederum liegen? Übrigens den debug Modus in /etc/ppp/ioptions habe ich schon aktiviert. Bin für jeden Tip dankbar. mfg Frank