Linux version 2.4.18-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017fec000 (usable) BIOS-e820: 0000000017fec000 - 0000000017fef000 (ACPI data) BIOS-e820: 0000000017fef000 - 0000000017fff000 (reserved) BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) Scanning bios EBDA for MXT signature On node 0 totalpages: 98284 zone(0): 4096 pages. zone(1): 94188 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=linux ro root=306 enableapic vga=0x0317 Initializing CPU#0 Detected 1135.930 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 2267.54 BogoMIPS Memory: 383724k/393136k available (1389k kernel code, 9024k reserved, 406k data, 120k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) III CPU 1133MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf1500, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) mxt_scan_bios: enter Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized ACPI: APM is already active, exiting vesafb: framebuffer at 0xf0000000, mapped to 0xd880d000, size 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:5182 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (1024x768, 42648 bytes). Console: switching to colour frame buffer device 105x34 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: chipset revision 5 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:pio hda: FUJITSU MHN2200AT, ATA DISK drive hdb: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 blk: queue c031ece4, I/O limit 4095Mb (mask 0xffffffff) hda: safely enabled flush hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63, UDMA(100) hdb: no flushcache support hdb: ATAPI 24X DVD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.99 Partition check: hda: hda1 hda2 < hda5 hda6 > Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: loaded (max 16 devices) Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.99 SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Uncompressing............done. Freeing initrd memory: 564k freed VFS: Mounted root (ext2 filesystem). usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 14:22:01 Mar 27 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 9 for device 00:1f.2 PCI: Sharing IRQ 9 with 02:03.0 PCI: Setting latency timer of device 00:1f.2 to 64 usb-uhci.c: USB UHCI at I/O 0xa400, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=2 Trying to unmount old root ... okay Freeing unused kernel memory: 120k freed hub.c: USB new device connect on bus1/1, assigned device number 2 usb-uhci.c: interrupt, status 3, frame# 1024 input0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb1:2.0 hub.c: USB new device connect on bus1/2, assigned device number 3 usb.c: USB device 3 (vend/prod 0x57c/0x1000) is not claimed by any active driver. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Adding Swap: 257000k swap-space (priority 42) 8139too Fast Ethernet driver 0.9.24 PCI: Found IRQ 9 for device 02:03.0 PCI: Sharing IRQ 9 with 00:1f.2 eth0: RealTek RTL8139 Fast Ethernet at 0xd99bc000, 00:e0:18:2d:9a:95, IRQ 9 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. uhci.c: USB Universal Host Controller Interface driver v1.1 CAPI-driver Rev 1.1.4.1: loaded kcapi: driver fcusb2 attached usb.c: registered new driver fcusb2 fcusb2: Driver 'fcusb2' attached to stack kcapi: Controller 1: fritz-usb attached capifs: Rev 1.1.4.1 capi20: started up with major 68 kcapi: capi20 attached capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs) CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded kcapi: capidrv attached kcapi: appl 1 up capidrv: Rev 1.1.4.1: loaded fcusb2: Stack version 3.09-10 kcapi: card 1 "fritz-usb" ready. kcapi: notify up contr 1 capidrv: controller 1 up capidrv-1: now up (2 B channels) capidrv-1: D2 trace enabled capi: controller 1 up spurious 8259A interrupt: IRQ7. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux PCMCIA Card Services 3.1.31 kernel build: 2.4.18-4GB #1 Wed Mar 27 13:57:05 UTC 2002 options: [pci] [cardbus] [apm] Intel ISA/PCI/CardBus PCIC probe: PCI: Enabling device 02:05.0 (0000 -> 0002) PCI: Found IRQ 11 for device 02:05.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Enabling device 02:05.1 (0000 -> 0002) PCI: Found IRQ 10 for device 02:05.1 Ricoh RL5C476 rev 80 PCI-to-CardBus at slot 02:05, mem 0xee801000 host opts [0]: [serial irq] [io 3/6/1] [mem 3/6/1] [pci irq 11] [lat 32/176] [bus 3/6] host opts [1]: [serial irq] [io 3/6/1] [mem 3/6/1] [pci irq 10] [lat 32/176] [bus 7/10] ISA irqs (default) = 3,4,7,12,15 PCI status changes IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver PCI: Found IRQ 5 for device 02:01.0 PCI: Sharing IRQ 5 with 02:01.1 eth0: no IPv6 routers present cs: memory probe 0xa0000000-0xa0ffffff: clean. init_module: prism2_cs.o: 0.1.13-devel1 Loaded init_module: dev_info is: prism2_cs cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0178-0x036f: clean. cs: IO port probe 0x0380-0x04cf: clean. cs: IO port probe 0x04d8-0x04ff: clean. cs: IO port probe 0x0800-0x080f: clean. cs: IO port probe 0x0816-0x08ff: clean. cs: IO port probe 0x0a00-0x0aff: clean. cs: IO port probe 0x0c00-0x0cff: clean. prism2_cs: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f hfa384x_corereset: hfa384x_corereset not supported on pcmcia. Use driver services COR access function instead ident: nic h/w: id=0x01 4.2.1 ident: pri f/w: id=0x15 4.4.1 ident: sta f/w: id=0x1f 7.28.1 MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=3/3 CFI:SUP:role=0x00:id=0x02:var=0x01:b/t=5/6 PRI:SUP:role=0x00:id=0x03:var=0x02:b/t=1/1 STA:SUP:role=0x00:id=0x04:var=0x01:b/t=6/9 PRI-CFI:ACT:role=0x01:id=0x02:var=0x01:b/t=1/6 STA-CFI:ACT:role=0x01:id=0x02:var=0x01:b/t=1/6 prism2sta_initmac: Failed to retrieve STA_MFIACTRANGES prism2sta_initmac: Failed, result=-61 prism2sta_open: initmac() failed, result=-61. usb-uhci.c: ENXIO 80000300, flags 0, urb c35a0d20, burb cf217de0 kcapi: card 1 down. kcapi: Controller 1: fritz-usb unregistered kcapi: notify down contr 1 capidrv: controller 1 down capidrv-1: now down. capi: controller 1 down kcapi: capi20 detached capi: Rev 1.1.4.2: unloaded kcapi: appl 1 down kcapi: capidrv detached capidrv: Rev 1.1.4.1 : unloaded ISDN-subsystem unloaded capifs: Rev 1.1.4.1 capi20: started up with major 68 kcapi: capi20 attached capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs) kcapi: capi20 detached capi: Rev 1.1.4.2: unloaded