Apr 29 22:31:55.17: [ 2513]: SESSION BEGIN 00000010 4930******
Apr 29 22:31:55.17: [ 2513]: SEND FAX: JOB 6 DEST ****** COMMID 00000010
Apr 29 22:31:55.17: [ 2513]: MODEM set DTR OFF
Apr 29 22:31:55.17: [ 2513]: DELAY 2600 ms
Apr 29 22:31:57.76: [ 2513]: MODEM set DTR ON
Apr 29 22:31:57.76: [ 2513]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS
Apr 29 22:31:57.76: [ 2513]: MODEM flush i/o
Apr 29 22:31:57.76: [ 2513]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Apr 29 22:31:57.98: [ 2513]: --> [2:OK]
Apr 29 22:31:57.98: [ 2513]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Apr 29 22:31:58.00: [ 2513]: --> [2:OK]
Apr 29 22:31:58.00: [ 2513]: <-- [12:AT+FCLASS=2\r]
Apr 29 22:31:58.01: [ 2513]: --> [2:OK]
Apr 29 22:31:58.01: [ 2513]: <-- [10:AT+FTBC=0\r]
Apr 29 22:31:58.02: [ 2513]: --> [2:OK]
Apr 29 22:31:58.02: [ 2513]: <-- [10:AT+FBOR=0\r]
Apr 29 22:31:58.03: [ 2513]: --> [2:OK]
Apr 29 22:31:58.03: [ 2513]: <-- [13:AT+FPHCTO=30\r]
Apr 29 22:31:58.04: [ 2513]: --> [5:ERROR]
Apr 29 22:31:58.04: [ 2513]: MODEM Command error
Apr 29 22:31:58.04: [ 2513]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Apr 29 22:31:58.06: [ 2513]: --> [2:OK]
Apr 29 22:31:58.06: [ 2513]: <-- [5:ATM0\r]
Apr 29 22:31:58.07: [ 2513]: --> [2:OK]
Apr 29 22:31:58.07: [ 2513]: MODEM input buffering enabled
Apr 29 22:31:58.07: [ 2513]: <-- [12:AT+FCLASS=2\r]
Apr 29 22:31:58.18: [ 2513]: --> [2:OK]
Apr 29 22:31:58.18: [ 2513]: <-- [10:AT+FTBC=0\r]
Apr 29 22:31:58.29: [ 2513]: --> [2:OK]
Apr 29 22:31:58.29: [ 2513]: <-- [10:AT+FBOR=0\r]
Apr 29 22:31:58.40: [ 2513]: --> [2:OK]
Apr 29 22:31:58.40: [ 2513]: <-- [13:AT+FPHCTO=30\r]
Apr 29 22:31:58.51: [ 2513]: --> [5:ERROR]
Apr 29 22:31:58.51: [ 2513]: MODEM Command error
Apr 29 22:31:58.51: [ 2513]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Apr 29 22:31:58.63: [ 2513]: --> [2:OK]
Apr 29 22:31:58.63: [ 2513]: <-- [17:AT+FLID="Elsner"\r]
Apr 29 22:31:58.74: [ 2513]: --> [2:OK]
Apr 29 22:31:58.74: [ 2513]: <-- [10:AT+FSPL=1\r]
Apr 29 22:31:58.85: [ 2513]: --> [2:OK]
Apr 29 22:31:58.85: [ 2513]: DIAL *********
Apr 29 22:31:58.85: [ 2513]: <-- [15:ATX3DT*******\r]
Apr 29 22:32:19.85: [ 2513]: --> [5:+FCON]
Apr 29 22:32:19.85: [ 2513]: --> [18:+FNSF:00 00 00 00 ]
Apr 29 22:32:19.85: [ 2513]: REMOTE NSF "00 00 00 00"
Apr 29 22:32:19.85: [ 2513]: --> [27:+FCSI:                     ]
Apr 29 22:32:19.85: [ 2513]: REMOTE CSI ""
Apr 29 22:32:19.85: [ 2513]: --> [21:+FDIS:1,5,0,2,1,0,0,4]
Apr 29 22:32:19.85: [ 2513]: --> [2:OK]
Apr 29 22:32:19.85: [ 2513]: REMOTE best rate 14400 bit/s
Apr 29 22:32:19.85: [ 2513]: REMOTE max page width 1728 pixels in 215 mm
Apr 29 22:32:19.85: [ 2513]: REMOTE max unlimited page length 
Apr 29 22:32:19.85: [ 2513]: REMOTE best vres 7.7 line/mm
Apr 29 22:32:19.85: [ 2513]: REMOTE best format 2-D MR
Apr 29 22:32:19.85: [ 2513]: REMOTE best 20 ms, 10 ms/scanline
Apr 29 22:32:19.85: [ 2513]: USE 14400 bit/s
Apr 29 22:32:19.85: [ 2513]: USE 20 ms, 10 ms/scanline
Apr 29 22:32:19.85: [ 2513]: REJECT: remote has no document to poll
Apr 29 22:32:19.85: [ 2513]: <-- [5:ATH0\r]
Apr 29 22:32:20.16: [ 2513]: --> [2:OK]
Apr 29 22:32:20.17: [ 2513]: MODEM set DTR OFF
Apr 29 22:32:20.22: [ 2513]: SESSION END