[opensuse-factory] New Tumbleweed snapshot 20170618 released!
Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&version=Tumbleweed&build=20170618 When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: ffmpeg (3.3.1 -> 3.3.2) gstreamer (1.10.4 -> 1.12.0) gstreamer-plugins-bad (1.10.4 -> 1.12.0) gstreamer-plugins-base (1.10.4 -> 1.12.0) gstreamer-plugins-good (1.10.4 -> 1.12.0) gstreamer-plugins-ugly (1.10.4 -> 1.12.0) libbluray (1.0.0 -> 1.0.1) libgusb (0.2.9 -> 0.2.10) libopenmpt libqt5-qtwebengine libwacom openslp polkit remmina (1.2.0~rcgit.13 -> 1.2.0~rcgit.18) rpm ruby2.2 zlib === Details === ==== ffmpeg ==== Version update (3.3.1 -> 3.3.2) Subpackages: libavcodec57 libavfilter6 libavformat57 libavresample3 libavutil55 libpostproc54 libswresample2 libswscale4 - Update to new upstream release 3.3.2 * Various fixes for integer overflows and too-large bit shifts ==== gstreamer ==== Version update (1.10.4 -> 1.12.0) Subpackages: gstreamer-devel gstreamer-utils libgstreamer-1_0-0 libgstreamer-1_0-0-32bit typelib-1_0-Gst-1_0 - Update to version 1.12.0: + Bugs fixed: bgo#782050. - Update to version 1.11.91: + Bugs fixed: bgo#781585, bgo#781585, bgo#780757, bgo#781484, bgo#781155, bgo#781155, bgo#780903. - Changes from version 1.11.90: + Bugs fixed: bgo#753754, bgo#775445, bgo#776140, bgo#776293, bgo#776999, bgo#778193, bgo#778830, bgo#779175, bgo#779459, bgo#779755, bgo#779831, bgo#780111, bgo#780751, bgo#780923. + Updated translations. - Update to version 1.11.2: + Bugs fixed: bgo#764707, bgo#773091, bgo#777375, bgo#777449, bgo#777780, bgo#777810, bgo#778866. ==== gstreamer-plugins-bad ==== Version update (1.10.4 -> 1.12.0) Subpackages: libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbadbase-1_0-0 libgstbadvideo-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstgl-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgsturidownloader-1_0-0 libgstwayland-1_0-0 - Pass --disable-mpegpsmux, --disable-mpegtsmux and - -disable-resindvd to configure when building for openSUSE on the OBS until we can get the licensing sorted upstream. Move the plugins to the orig-addon package. - Add missing libgstplayer-1_0-0 Requires to gstreamer-plugins-bad-devel sub package. - Update to version 1.12.0: + Bugs fixed: bgo#773681, bgo#764947, bgo#780976, bgo#782046, bgo#782119, bgo#782078. - Changes from version 1.11.91: + Bugs fixed: bgo#729371, bgo#764011, bgo#778237, bgo#780190, bgo#780397, bgo#780402, bgo#780494, bgo#780569, bgo#780570, bgo#780897, bgo#781017, bgo#781018, bgo#781019, bgo#781022, bgo#781023, bgo#781024, bgo#781027, bgo#781037, bgo#781043, bgo#781156, bgo#781170, bgo#781179, bgo#781188, bgo#781233, bgo#781267, bgo#781320, bgo#781539, bgo#781725. - Changes from version 1.11.90: + Bugs fixed: bgo#736213, bgo#755782, bgo#764726, bgo#772811, bgo#774544, bgo#775487, bgo#776436, bgo#776997, bgo#776999, bgo#777847, bgo#778073, bgo#778333, bgo#778731, bgo#778825, bgo#779011, bgo#779067, bgo#779309, bgo#779333, bgo#779447, bgo#779453, bgo#779790, bgo#779831, bgo#779856, bgo#779869, bgo#780064, bgo#780108, bgo#780179, bgo#780180, bgo#780330, bgo#780367. - Stop passing --disable-fatal-warnings to configure, not needed on stable branch. - Package new sub package libgstbadallocators-1_0-0. - Update to version 1.11.2: + Bugs fixed: bgo#764947, bgo#758257, bgo#773709, bgo#775665, bgo#776360, bgo#776490, bgo#777181, bgo#777206, bgo#777376, bgo#777377, bgo#777394, bgo#777652, bgo#777682, bgo#777741, bgo#777760, bgo#778028, bgo#778076, bgo#778142, bgo#778703, bgo#779064, bgo#779070, bgo#779103, bgo#779154. ==== gstreamer-plugins-base ==== Version update (1.10.4 -> 1.12.0) Subpackages: libgstallocators-1_0-0 libgstapp-1_0-0 libgstaudio-1_0-0 libgstaudio-1_0-0-32bit libgstfft-1_0-0 libgstpbutils-1_0-0 libgstriff-1_0-0 libgstrtp-1_0-0 libgstrtsp-1_0-0 libgstsdp-1_0-0 libgsttag-1_0-0 libgsttag-1_0-0-32bit libgstvideo-1_0-0 libgstvideo-1_0-0-32bit typelib-1_0-GstAudio-1_0 typelib-1_0-GstPbutils-1_0 typelib-1_0-GstTag-1_0 typelib-1_0-GstVideo-1_0 - Run parallel build with smp_mflags. Recast a slightly convoluted find call. Replace old $RPM shell vars by macros. - Update to version 1.12.0: + Bugs fixed: bgo#782095, bgo#782018. - Update to version 1.11.91: + Bugs fixed: bgo#779866, bgo#781149, bgo#781152, bgo#781168, bgo#781490. - Changes from version 1.11.90: + Bugs fixed: bgo#774544, bgo#776140, bgo#776172, bgo#776446, bgo#779344, bgo#779515, bgo#779866, bgo#780053, bgo#780100, bgo#780257, bgo#780297, bgo#780429, bgo#780559, bgo#780566, bgo#780764, bgo#780769. + Updated translations. - Update to versions 1.11.2: + Bugs fixed: bgo#740557, bgo#775553, bgo#775893, bgo#776797, bgo#777458, bgo#777530, bgo#778298, bgo#778702, bgo#778974, bgo#779010. ==== gstreamer-plugins-good ==== Version update (1.10.4 -> 1.12.0) Subpackages: gstreamer-plugins-good-extra - Update to version 1.12.0: + Bugs fixed: bgo#782042. ==== gstreamer-plugins-ugly ==== Version update (1.10.4 -> 1.12.0) - Simplyfy the conditionals in our configure call. - Update to version 1.12.0: + Updated translations. - Changes from version 1.11.91: + Bugs fixed: bgo#779249. - Changes from version 1.11.90: + Bugs fixed: bgo#779329. - Conditionallize a52dec module building: in Tumbleweed, a52dec is available and the module can thus be built directly now: + Introduce variable ENABLE_A52DEC. + Apply gstreamer-plugins-ugly-1.0.1-patched_liba52.patch when BUILD_ORIG OR ENABLE_A52DEC is set. + Unconditionally add gstreamer-plugins-ugly-1.0.1-patched_liba52.patch to src.rpm. - Switch ENABLE_MPG123 to 1 for suse_version > 1320 (currently only Tumbleweed): mpg123 is now available to the distro. - Update to version 1.11.2: + Bugs fixed: bgo#777903. - Replace libmpeg2-devel, libopencore-amr-devel, libtwolame-devel and libx264-devel with pkgconfig(libmpeg2), pkgconfig(opencore-amrwb), pkgconfig(twolame) and pkgconfig(x264) BuildRequires: Align with what configure checks for. ==== libbluray ==== Version update (1.0.0 -> 1.0.1) - Update to version 1.0.1: + Add possibility to check whether BD-J is functional without opening a disc. + Improve main title selection. + Improve error resilience and stability. + Fix Windows dll loading. + Fix JAVA_HOME environment variable handling in Windows. + Fix build issues when CPPFLAGS is given in make command line. + Fix MSVC build issues. + Remove --disable-bdjava and --disable-udf configure options. - Fixed patch libbluray-jvm_dir.patch. ==== libgusb ==== Version update (0.2.9 -> 0.2.10) - Update to version 0.2.10: + Correctly detect removed devices when rescanning. + Fix a memory leak when using control tranfers. + Fix gtk-doc build when builddir != srcdir. + Fix symbol version table up to version 0.2.9. ==== libopenmpt ==== Subpackages: libmodplug1 libopenmpt0 - baselibs.conf for libmodplug.so.1 ==== libqt5-qtwebengine ==== - Backport patches to fix build on AArch64 and add workaround (QTBUG-61128): * arm64-linux.patch * arm64-toolchain.patch - Use proprietary codecs if supported by system ffmpeg (boo#1043375) ==== libwacom ==== Subpackages: libwacom-data libwacom2 - Build wacom udev rules (boo#1041714) fixes libinput error: libinput bug: Device 'Wacom BambooPT 2FG Small Pad' does not meet tablet criteria. Ignoring this device. ==== openslp ==== Subpackages: openslp-devel openslp-server - Add support for OpenSSL 1.1. Commit from upstream [bsc#1042665] new patch: openslp.openssl-1.1.diff ==== polkit ==== Subpackages: libpolkit0 polkit-devel typelib-1_0-Polkit-1_0 - Use gettext as fallback to get potential distro translations for polkit actions. Similar mechnism as used for desktop file translations. That way it's possible to use weblate to add additional translations that are not provided by upstream (polkit-gettext.patch). ==== remmina ==== Version update (1.2.0~rcgit.13 -> 1.2.0~rcgit.18) Subpackages: remmina-lang remmina-plugin-vnc remmina-plugin-xdmcp - Version update to version 1.2.0.rcgit.18: * Various fixes around, see the upstream Changelog - move README.SUSE to https://en.opensuse.org/Remmina - update to version 1.2.0.rcgit.17 ==== rpm ==== Subpackages: rpm-32bit rpm-build rpm-devel - Add patch to handle newer package statement variations for Perl 5.12+ * perlprov-package.diff ==== ruby2.2 ==== Subpackages: libruby2_2-2_2 ruby2.2-devel ruby2.2-stdlib - forcefully enable PIE here ==== zlib ==== Subpackages: libminizip1 libz1 libz1-32bit zlib-devel - Added 32bit minizip support -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Op maandag 19 juni 2017 17:33:24 CEST schreef Dominique Leuenberger:
Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here.
Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&version =Tumbleweed&build=20170618
When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem.
Packages changed: ffmpeg (3.3.1 -> 3.3.2) gstreamer (1.10.4 -> 1.12.0) gstreamer-plugins-bad (1.10.4 -> 1.12.0) gstreamer-plugins-base (1.10.4 -> 1.12.0) gstreamer-plugins-good (1.10.4 -> 1.12.0) gstreamer-plugins-ugly (1.10.4 -> 1.12.0) libbluray (1.0.0 -> 1.0.1) libgusb (0.2.9 -> 0.2.10) libopenmpt libqt5-qtwebengine libwacom openslp polkit remmina (1.2.0~rcgit.13 -> 1.2.0~rcgit.18) rpm ruby2.2 zlib
=== Details ===
==== ffmpeg ==== Version update (3.3.1 -> 3.3.2) Subpackages: libavcodec57 libavfilter6 libavformat57 libavresample3 libavutil55 libpostproc54 libswresample2 libswscale4
- Update to new upstream release 3.3.2 * Various fixes for integer overflows and too-large bit shifts
==== gstreamer ==== Version update (1.10.4 -> 1.12.0) Subpackages: gstreamer-devel gstreamer-utils libgstreamer-1_0-0 libgstreamer-1_0-0-32bit typelib-1_0-Gst-1_0
- Update to version 1.12.0: + Bugs fixed: bgo#782050. - Update to version 1.11.91: + Bugs fixed: bgo#781585, bgo#781585, bgo#780757, bgo#781484, bgo#781155, bgo#781155, bgo#780903. - Changes from version 1.11.90: + Bugs fixed: bgo#753754, bgo#775445, bgo#776140, bgo#776293, bgo#776999, bgo#778193, bgo#778830, bgo#779175, bgo#779459, bgo#779755, bgo#779831, bgo#780111, bgo#780751, bgo#780923. + Updated translations. - Update to version 1.11.2: + Bugs fixed: bgo#764707, bgo#773091, bgo#777375, bgo#777449, bgo#777780, bgo#777810, bgo#778866.
==== gstreamer-plugins-bad ==== Version update (1.10.4 -> 1.12.0) Subpackages: libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbadbase-1_0-0 libgstbadvideo-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstgl-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgsturidownloader-1_0-0 libgstwayland-1_0-0
- Pass --disable-mpegpsmux, --disable-mpegtsmux and - -disable-resindvd to configure when building for openSUSE on the OBS until we can get the licensing sorted upstream. Move the plugins to the orig-addon package. - Add missing libgstplayer-1_0-0 Requires to gstreamer-plugins-bad-devel sub package. - Update to version 1.12.0: + Bugs fixed: bgo#773681, bgo#764947, bgo#780976, bgo#782046, bgo#782119, bgo#782078. - Changes from version 1.11.91: + Bugs fixed: bgo#729371, bgo#764011, bgo#778237, bgo#780190, bgo#780397, bgo#780402, bgo#780494, bgo#780569, bgo#780570, bgo#780897, bgo#781017, bgo#781018, bgo#781019, bgo#781022, bgo#781023, bgo#781024, bgo#781027, bgo#781037, bgo#781043, bgo#781156, bgo#781170, bgo#781179, bgo#781188, bgo#781233, bgo#781267, bgo#781320, bgo#781539, bgo#781725. - Changes from version 1.11.90: + Bugs fixed: bgo#736213, bgo#755782, bgo#764726, bgo#772811, bgo#774544, bgo#775487, bgo#776436, bgo#776997, bgo#776999, bgo#777847, bgo#778073, bgo#778333, bgo#778731, bgo#778825, bgo#779011, bgo#779067, bgo#779309, bgo#779333, bgo#779447, bgo#779453, bgo#779790, bgo#779831, bgo#779856, bgo#779869, bgo#780064, bgo#780108, bgo#780179, bgo#780180, bgo#780330, bgo#780367. - Stop passing --disable-fatal-warnings to configure, not needed on stable branch. - Package new sub package libgstbadallocators-1_0-0. - Update to version 1.11.2: + Bugs fixed: bgo#764947, bgo#758257, bgo#773709, bgo#775665, bgo#776360, bgo#776490, bgo#777181, bgo#777206, bgo#777376, bgo#777377, bgo#777394, bgo#777652, bgo#777682, bgo#777741, bgo#777760, bgo#778028, bgo#778076, bgo#778142, bgo#778703, bgo#779064, bgo#779070, bgo#779103, bgo#779154.
==== gstreamer-plugins-base ==== Version update (1.10.4 -> 1.12.0) Subpackages: libgstallocators-1_0-0 libgstapp-1_0-0 libgstaudio-1_0-0 libgstaudio-1_0-0-32bit libgstfft-1_0-0 libgstpbutils-1_0-0 libgstriff-1_0-0 libgstrtp-1_0-0 libgstrtsp-1_0-0 libgstsdp-1_0-0 libgsttag-1_0-0 libgsttag-1_0-0-32bit libgstvideo-1_0-0 libgstvideo-1_0-0-32bit typelib-1_0-GstAudio-1_0 typelib-1_0-GstPbutils-1_0 typelib-1_0-GstTag-1_0 typelib-1_0-GstVideo-1_0
- Run parallel build with smp_mflags. Recast a slightly convoluted find call. Replace old $RPM shell vars by macros. - Update to version 1.12.0: + Bugs fixed: bgo#782095, bgo#782018. - Update to version 1.11.91: + Bugs fixed: bgo#779866, bgo#781149, bgo#781152, bgo#781168, bgo#781490. - Changes from version 1.11.90: + Bugs fixed: bgo#774544, bgo#776140, bgo#776172, bgo#776446, bgo#779344, bgo#779515, bgo#779866, bgo#780053, bgo#780100, bgo#780257, bgo#780297, bgo#780429, bgo#780559, bgo#780566, bgo#780764, bgo#780769. + Updated translations. - Update to versions 1.11.2: + Bugs fixed: bgo#740557, bgo#775553, bgo#775893, bgo#776797, bgo#777458, bgo#777530, bgo#778298, bgo#778702, bgo#778974, bgo#779010.
==== gstreamer-plugins-good ==== Version update (1.10.4 -> 1.12.0) Subpackages: gstreamer-plugins-good-extra
- Update to version 1.12.0: + Bugs fixed: bgo#782042.
==== gstreamer-plugins-ugly ==== Version update (1.10.4 -> 1.12.0)
- Simplyfy the conditionals in our configure call. - Update to version 1.12.0: + Updated translations. - Changes from version 1.11.91: + Bugs fixed: bgo#779249. - Changes from version 1.11.90: + Bugs fixed: bgo#779329. - Conditionallize a52dec module building: in Tumbleweed, a52dec is available and the module can thus be built directly now: + Introduce variable ENABLE_A52DEC. + Apply gstreamer-plugins-ugly-1.0.1-patched_liba52.patch when BUILD_ORIG OR ENABLE_A52DEC is set. + Unconditionally add gstreamer-plugins-ugly-1.0.1-patched_liba52.patch to src.rpm. - Switch ENABLE_MPG123 to 1 for suse_version > 1320 (currently only Tumbleweed): mpg123 is now available to the distro. - Update to version 1.11.2: + Bugs fixed: bgo#777903. - Replace libmpeg2-devel, libopencore-amr-devel, libtwolame-devel and libx264-devel with pkgconfig(libmpeg2), pkgconfig(opencore-amrwb), pkgconfig(twolame) and pkgconfig(x264) BuildRequires: Align with what configure checks for.
==== libbluray ==== Version update (1.0.0 -> 1.0.1)
- Update to version 1.0.1: + Add possibility to check whether BD-J is functional without opening a disc. + Improve main title selection. + Improve error resilience and stability. + Fix Windows dll loading. + Fix JAVA_HOME environment variable handling in Windows. + Fix build issues when CPPFLAGS is given in make command line. + Fix MSVC build issues. + Remove --disable-bdjava and --disable-udf configure options. - Fixed patch libbluray-jvm_dir.patch.
==== libgusb ==== Version update (0.2.9 -> 0.2.10)
- Update to version 0.2.10: + Correctly detect removed devices when rescanning. + Fix a memory leak when using control tranfers. + Fix gtk-doc build when builddir != srcdir. + Fix symbol version table up to version 0.2.9.
==== libopenmpt ==== Subpackages: libmodplug1 libopenmpt0
- baselibs.conf for libmodplug.so.1
==== libqt5-qtwebengine ====
- Backport patches to fix build on AArch64 and add workaround (QTBUG-61128): * arm64-linux.patch * arm64-toolchain.patch - Use proprietary codecs if supported by system ffmpeg (boo#1043375)
==== libwacom ==== Subpackages: libwacom-data libwacom2
- Build wacom udev rules (boo#1041714) fixes libinput error: libinput bug: Device 'Wacom BambooPT 2FG Small Pad' does not meet tablet criteria. Ignoring this device.
==== openslp ==== Subpackages: openslp-devel openslp-server
- Add support for OpenSSL 1.1. Commit from upstream [bsc#1042665] new patch: openslp.openssl-1.1.diff
==== polkit ==== Subpackages: libpolkit0 polkit-devel typelib-1_0-Polkit-1_0
- Use gettext as fallback to get potential distro translations for polkit actions. Similar mechnism as used for desktop file translations. That way it's possible to use weblate to add additional translations that are not provided by upstream (polkit-gettext.patch).
==== remmina ==== Version update (1.2.0~rcgit.13 -> 1.2.0~rcgit.18) Subpackages: remmina-lang remmina-plugin-vnc remmina-plugin-xdmcp
- Version update to version 1.2.0.rcgit.18: * Various fixes around, see the upstream Changelog - move README.SUSE to https://en.opensuse.org/Remmina - update to version 1.2.0.rcgit.17
==== rpm ==== Subpackages: rpm-32bit rpm-build rpm-devel
- Add patch to handle newer package statement variations for Perl 5.12+ * perlprov-package.diff
==== ruby2.2 ==== Subpackages: libruby2_2-2_2 ruby2.2-devel ruby2.2-stdlib
- forcefully enable PIE here
==== zlib ==== Subpackages: libminizip1 libz1 libz1-32bit zlib-devel
- Added 32bit minizip support
and we simply go ( with modified zypp.conf re. no-allow-vendor-change on two machines ) salt '*' pkg.upgrade and four machines done. -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
* Knurpht - Gertjan Lettink
Op maandag 19 juni 2017 17:33:24 CEST schreef Dominique Leuenberger:
Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here.
Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&version =Tumbleweed&build=20170618
When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem.
Packages changed: ffmpeg (3.3.1 -> 3.3.2) gstreamer (1.10.4 -> 1.12.0)
would be nice that you would follow the instructions above included in your reply. and that you would trim all but what is essential to convey your message
openSUSE Board Member openSUSE Forums Team would definitely try to set a better examnple.
-- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Monday, 19 June 2017 16:33:24 BST Dominique Leuenberger wrote:
Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here.
Hi I got this message installing gstreamer with this snapshot - is it an issue? (15/48) Installing: gstreamer-1.12.0-1.1.x86_64 ........................................................................................................ [done] Additional rpm output: setting /usr/lib/gstreamer-1.0/gst-ptp-helper to root:root 0755 "= cap_net_bind_service+ep". (wrong missing capabilities) This seems regular occurrence for me with cups updates although it doesn't seem to affect it working. Does anyone know who needs to know about it? (48/48) Installing: cups-2.2.3-211.1.x86_64 ............................................................................................................ [done] Additional rpm output: Failed to try-restart cups-lpd@.service: Unit name cups-lpd@.service is missing the instance name. See system logs and 'systemctl status cups-lpd@.service' for details. # systemctl status cups-lpd@.service Failed to get properties: Unit name cups-lpd@.service is missing the instance name. Regards Ian -- opensuse:tumbleweed:20170617 Qt: 5.7.1 KDE Frameworks: 5.34.0 KDE Plasma: 5.10.1 kwin 5.10.1 kmail2 5.5.2 akonadiserver 5.5.2 Kernel: 4.11.5-1-default Nouveau: 1.0.15_1.2 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
I'm not sure if this issue was caused by this (20170618) or the previous snapshot, but after tomorrow upgrade (I previously upgraded at Friday), I have problem with external monitor. I have VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) and fully upgraded TW with KDE. If I plug external monitor (HDMI if it matters), the Plasma freezes. Restart of the Plasma doesn't help. It is not possible to click on anything, nothing. Interestingly, unplugging the monitor defreezes everything and the desktop is fully usable again. As a workaround, the monitor must be plugged before turning on of the computer. Then everything works as usually. Anyone else experiencing this? -- Vojtěch Zeisek https://trapa.cz/
On mardi, 20 juin 2017 10.11:20 h CEST Vojtěch Zeisek wrote:
I'm not sure if this issue was caused by this (20170618) or the previous snapshot, but after tomorrow upgrade (I previously upgraded at Friday), I have problem with external monitor. I have VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) and fully upgraded TW with KDE. If I plug external monitor (HDMI if it matters), the Plasma freezes. Restart of the Plasma doesn't help. It is not possible to click on anything, nothing. Interestingly, unplugging the monitor defreezes everything and the desktop is fully usable again. As a workaround, the monitor must be plugged before turning on of the computer. Then everything works as usually. Anyone else experiencing this?
I'm experimenting exactly the inverse. If I start my computer with external screen (DisplayPort on docking) everything freeze when sddm start. The new update, make it freeze also now on shutdown ;-) So undocking before start, and before shutdown. I use nvidia 375.66. If I don't use the docking, then everything works as expected. So I suspect more an hardware shit somewhere. -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch Bareos Partner, openSUSE Member, fsfe fellowship GPG KEY : D5C9B751C4653227 irc: tigerfoot -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Dne úterý 20. června 2017 11:00:30 CEST, Bruno Friedmann napsal(a):
On mardi, 20 juin 2017 10.11:20 h CEST Vojtěch Zeisek wrote:
I'm not sure if this issue was caused by this (20170618) or the previous snapshot, but after tomorrow upgrade (I previously upgraded at Friday), I have problem with external monitor. I have VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) and fully upgraded TW with KDE. If I plug external monitor (HDMI if it matters), the Plasma freezes. Restart of the Plasma doesn't help. It is not possible to click on anything, nothing. Interestingly, unplugging the monitor defreezes everything and the desktop is fully usable again. As a workaround, the monitor must be plugged before turning on of the computer. Then everything works as usually. Anyone else experiencing this?
I'm experimenting exactly the inverse. If I start my computer with external screen (DisplayPort on docking) everything freeze when sddm start. The new update, make it freeze also now on shutdown ;-) So undocking before start, and before shutdown. I use nvidia 375.66.
If I don't use the docking, then everything works as expected. So I suspect more an hardware shit somewhere.
I'm using second monitor almost daily and until tomorrow it had been working well, i.e. I turn on the notebook, I plug in the monitor and it works. ;-) -- Vojtěch Zeisek https://trapa.cz/
On 20/06/2017 11:17, Vojtěch Zeisek wrote:
Dne úterý 20. června 2017 11:00:30 CEST, Bruno Friedmann napsal(a):
On mardi, 20 juin 2017 10.11:20 h CEST Vojtěch Zeisek wrote:
I'm not sure if this issue was caused by this (20170618) or the previous snapshot, but after tomorrow upgrade (I previously upgraded at Friday), I have problem with external monitor. I have VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) and fully upgraded TW with KDE. If I plug external monitor (HDMI if it matters), the Plasma freezes. Restart of the Plasma doesn't help. It is not possible to click on anything, nothing. Interestingly, unplugging the monitor defreezes everything and the desktop is fully usable again. As a workaround, the monitor must be plugged before turning on of the computer. Then everything works as usually. Anyone else experiencing this? I'm experimenting exactly the inverse. If I start my computer with external screen (DisplayPort on docking) everything freeze when sddm start. The new update, make it freeze also now on shutdown ;-) So undocking before start, and before shutdown. I use nvidia 375.66.
If I don't use the docking, then everything works as expected. So I suspect more an hardware shit somewhere. I'm using second monitor almost daily and until tomorrow it had been working well, i.e. I turn on the notebook, I plug in the monitor and it works. ;-)
I'm using the second monitor daily too. When I get at work I plug my laptop in the docking station and then I power it up. No problems at all till today. Hope it won't break tomorrow :-D The difference is that my GPU is an Intel. Cris
On mardi, 20 juin 2017 11.39:53 h CEST Guadagnino Cristiano wrote:
On 20/06/2017 11:17, Vojtěch Zeisek wrote:
Dne úterý 20. června 2017 11:00:30 CEST, Bruno Friedmann napsal(a):
On mardi, 20 juin 2017 10.11:20 h CEST Vojtěch Zeisek wrote:
I'm not sure if this issue was caused by this (20170618) or the previous snapshot, but after tomorrow upgrade (I previously upgraded at Friday), I have problem with external monitor. I have VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) and fully upgraded TW with KDE. If I plug external monitor (HDMI if it matters), the Plasma freezes. Restart of the Plasma doesn't help. It is not possible to click on anything, nothing. Interestingly, unplugging the monitor defreezes everything and the desktop is fully usable again. As a workaround, the monitor must be plugged before turning on of the computer. Then everything works as usually. Anyone else experiencing this?
I'm experimenting exactly the inverse. If I start my computer with external screen (DisplayPort on docking) everything freeze when sddm start. The new update, make it freeze also now on shutdown ;-) So undocking before start, and before shutdown. I use nvidia 375.66.
If I don't use the docking, then everything works as expected. So I suspect more an hardware shit somewhere.
I'm using second monitor almost daily and until tomorrow it had been working well, i.e. I turn on the notebook, I plug in the monitor and it works. ;-)>
I'm using the second monitor daily too. When I get at work I plug my laptop in the docking station and then I power it up. No problems at all till today. Hope it won't break tomorrow :-D The difference is that my GPU is an Intel.
Cris
Don't worry too much, I've the freeze also with the intel (optimus if activated) too ... When I use external monitor witout the docking station everything work as expected. Lesson Tumbleweed rocks, hardware sucks :-) -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch Bareos Partner, openSUSE Member, fsfe fellowship GPG KEY : D5C9B751C4653227 irc: tigerfoot -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
вівторок, 20 червня 2017 р. 14:36:03 EEST Bruno Friedmann написано:
On mardi, 20 juin 2017 11.39:53 h CEST Guadagnino Cristiano wrote:
On 20/06/2017 11:17, Vojtěch Zeisek wrote:
Dne úterý 20. června 2017 11:00:30 CEST, Bruno Friedmann napsal(a):
On mardi, 20 juin 2017 10.11:20 h CEST Vojtěch Zeisek wrote:
I'm not sure if this issue was caused by this (20170618) or the previous snapshot, but after tomorrow upgrade (I previously upgraded at Friday), I have problem with external monitor. I have VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) and fully upgraded TW with KDE. If I plug external monitor (HDMI if it matters), the Plasma freezes. Restart of the Plasma doesn't help. It is not possible to click on anything, nothing. Interestingly, unplugging the monitor defreezes everything and the desktop is fully usable again. As a workaround, the monitor must be plugged before turning on of the computer. Then everything works as usually. Anyone else experiencing this?
I'm experimenting exactly the inverse. If I start my computer with external
screen (DisplayPort on docking) everything freeze when sddm
start. The new update, make it freeze also now on shutdown ;-) So undocking before start, and before shutdown. I use nvidia 375.66.
If I don't use the docking, then everything works as expected. So I suspect
more an hardware shit somewhere.
I'm using second monitor almost daily and until tomorrow it had been working
well, i.e. I turn on the notebook, I plug in the monitor and it
works. ;-)>
I'm using the second monitor daily too. When I get at work I plug my laptop in the docking station and then I power it up. No problems at all till today. Hope it won't break tomorrow :-D The difference is that my GPU is an Intel.
Cris
Don't worry too much, I've the freeze also with the intel (optimus if activated) too ...
When I use external monitor witout the docking station everything work as expected.
Lesson Tumbleweed rocks, hardware sucks :-)
Hi, It looks I'm experiencing this problem too. Usually I'm starting and working without external monitor (at home) or with already plugged external monitor (at work). But today I've unplugged external monitor when electricity went down and replugged it back after a while and primary laptop display was frozen (though mouse cursor moved fine). It become all right again after switch to tty1 (Ctrl+Alt+F1) and back (Ctrl+Alt+F7). openSUSE Tumbleweed x86_64 20170701, Intel GPU HD Graphics 530 (NVidia is present, but isn't used, blob: 381.22), SDDM, KDE Plasma 5. External monitor plugged via HDMI cable. -- Kind regards, Mykola Krachkovsky -- Найкращі побажання, Микола Крачковський
* Bruno Friedmann
On mardi, 20 juin 2017 10.11:20 h CEST Vojtěch Zeisek wrote:
I'm not sure if this issue was caused by this (20170618) or the previous snapshot, but after tomorrow upgrade (I previously upgraded at Friday), I have problem with external monitor. I have VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) and fully upgraded TW with KDE. If I plug external monitor (HDMI if it matters), the Plasma freezes. Restart of the Plasma doesn't help. It is not possible to click on anything, nothing. Interestingly, unplugging the monitor defreezes everything and the desktop is fully usable again. As a workaround, the monitor must be plugged before turning on of the computer. Then everything works as usually. Anyone else experiencing this?
I'm experimenting exactly the inverse. If I start my computer with external screen (DisplayPort on docking) everything freeze when sddm start. The new update, make it freeze also now on shutdown ;-) So undocking before start, and before shutdown. I use nvidia 375.66.
you might try NVIDIA-Linux-x86_64-381.22.run -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Hi, think I have the same issue. First I thought it was related to screen rotation but it turns out that is only partially true: When I connect my screens without kde/plasma in the sddm loginmanager the screens come to live in mirrored mode. This work every time. The screens being connected at boot or not. When I then use xrandr to configure my rotated desktop setup the freeze happens. Well not really a freeze it seems the graphics card simply does not update the screen. Everything still works. The cursor too. I think this is because its a hardware rendered cursor. The only relevant message i could extract from journal/X.org.log etc is this: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. After seeing this i tried turning off compressed framebuffer by adding i915.enable_fbc=0 to the kernel command line. Now I can attach/detach screens without problems. But the Graphics are very slow. Any Ideas? cheers Wonko On Tuesday, 20 June 2017 10:11:20 CEST Vojtěch Zeisek wrote:
I'm not sure if this issue was caused by this (20170618) or the previous snapshot, but after tomorrow upgrade (I previously upgraded at Friday), I have problem with external monitor. I have VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) and fully upgraded TW with KDE. If I plug external monitor (HDMI if it matters), the Plasma freezes. Restart of the Plasma doesn't help. It is not possible to click on anything, nothing. Interestingly, unplugging the monitor defreezes everything and the desktop is fully usable again. As a workaround, the monitor must be plugged before turning on of the computer. Then everything works as usually. Anyone else experiencing this?
-- „Stäbchen nahe seiner Mitte packen. Spitzes Ende im Mund anfeuchten. In Zahnzwischenraum einführen, stumpfe Seite dicht am Zahnfleisch. Vorsichtig hin und her bewegen.“ - „Mir schien“, sagte Wonko der Verständige, „eine Zivilisation die so weit den Verstand verloren hat, dass sie eine Reihe detaillierter Anweisungen nötig hat, um ein Päckchen Zahnstocher zu benutzen, ist keine Zivilisation, in der ich noch leben und bei Verstand bleiben kann.“
Dominique Leuenberger wrote:
Packages changed:
libopenmpt
From there I get
Problem: libmodplug1-32bit-0.2.8043~beta23-2.1.x86_64 requires libopenmpt.so.0, but this requirement cannot be provided uninstallable providers: libopenmpt0-0.2.8043~beta23-2.1.i586[openSUSE-Tumbleweed] Solution 1: Following actions will be done: install libopenmpt0-0.2.8043~beta23-2.1.i586 despite the inferior architecture install libphysfs1-2.0.3-182.9.i586 despite the inferior architecture install libluajit-5_1-2-2.1.0~beta2-2.1.i586 despite the inferior architecture Solution 2: keep obsolete libmodplug1-32bit-0.8.8.5-4.9.x86_64 Solution 3: break libmodplug1-32bit-0.2.8043~beta23-2.1.x86_64 by ignoring some of its dependencies -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Tue, 2017-06-20 at 12:11 +0100, Peter Suetterlin wrote:
Dominique Leuenberger wrote:
Packages changed: libopenmpt
From there I get
Problem: libmodplug1-32bit-0.2.8043~beta23-2.1.x86_64 requires libopenmpt.so.0, but this requirement cannot be provided uninstallable providers: libopenmpt0-0.2.8043~beta23- 2.1.i586[openSUSE-Tumbleweed] Solution 1: Following actions will be done: install libopenmpt0-0.2.8043~beta23-2.1.i586 despite the inferior architecture install libphysfs1-2.0.3-182.9.i586 despite the inferior architecture install libluajit-5_1-2-2.1.0~beta2-2.1.i586 despite the inferior architecture Solution 2: keep obsolete libmodplug1-32bit-0.8.8.5-4.9.x86_64 Solution 3: break libmodplug1-32bit-0.2.8043~beta23-2.1.x86_64 by ignoring some of its dependencies
Fix for that is underway and should be part of snapshot 0620. for the time being, I suggest option 2, which will cause the least problem. Cheers, Dominique
participants (11)
-
Bruno Friedmann -
Dominique Leuenberger -
Dominique Leuenberger / DimStar -
Guadagnino Cristiano -
ianseeks -
Knurpht - Gertjan Lettink -
Mykola Krachkovsky -
Patrick Shanahan -
Peter Suetterlin -
Vojtěch Zeisek -
Wonko