On 07/29/2011 05:04 PM, Donn Washburn wrote:

Try hwinfo --modem and get the correct /dev/. This one is ttyS4 Then try "minicom --help" and set it with -D. Some else is like going to give you a problem is ppp. As I remember it needs a chmod operation And have you run Yast2 > Hardware > modem Ok, I tried it with these results: 11:2 hwinfo --modem 45: Serial 00.0: 10200 Modem [Created at modem.447] Unique ID: 4gcD.KM1shMXflFC Parent ID: GiVB.3fyvFV+mbWD Hardware Class: modem Model: "AT Modem" Vendor: int 0x2000 "Unknown" Device: int 0x0001 "AT Modem" Device File: /dev/ttyS4 Device Files: /dev/ttyS4, /dev/char/4:68 Speed: 115.2 kbps Init1: ATZ Init2: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #36 (Serial controller)

11:4: hwinfo --modem 45: Serial 00.0: 10200 Modem [Created at modem.447] Unique ID: 4gcD.KM1shMXflFC Parent ID: GiVB.3fyvFV+mbWD Hardware Class: modem Model: "AT Modem" Vendor: int 0x2000 "Unknown" Device: int 0x0001 "AT Modem" Device File: /dev/ttyS4 Speed: 115.2 kbps Init1: ATZ Init2: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #36 (Serial controller) Notice the line which isn't in 11.4: Device Files: /dev/ttyS4, /dev/char/4:68 I checked and there is a device at /dev/char/4:68 on each one. I don't know want to make of it, though, other than there is finally a difference discovered. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org