[opensuse-factory] Can we please have newer than 8.22 coreutil (dd) on next leap or even current leap?
Hello maintainers. I would like to see some dd with progress meter :) and found out that gnu coreutil dd version 8.24 at least (released july 2015) comes with a built-in functionality. Wondering why leap 42.1 was released with gnu coreutil 8.22 which dates back to 2013? Thank's you in advance. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am 16.06.2016 um 13:48 schrieb cagsm:
Hello maintainers.
I would like to see some dd with progress meter :) and found out that gnu coreutil dd version 8.24 at least (released july 2015) comes with a built-in functionality. Wondering why leap 42.1 was released with gnu coreutil 8.22 which dates back to 2013?
why Leap 42.1 was released with that? - Because Leap 42.1 is based on SLES12-SP1 as much as possible for the core platform (please read about Leap what it is) Will 42.1 see an update for coreutils? - Unlikely because coreutils sounds pretty core and there is risk to introduce new issues (please again read what Leap is supposed to provide) Can it be updated in Leap 42.2: - apparently it already is already updated to 8.25 when I look at the current status Wolfgang -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
* cagsm
Hello maintainers.
I would like to see some dd with progress meter :) and found out that gnu coreutil dd version 8.24 at least (released july 2015) comes with a built-in functionality. Wondering why leap 42.1 was released with gnu coreutil 8.22 which dates back to 2013?
you forget that leap is a "conservative" repo. and 8.25 is available in Base:System for leap. use the force, luke: software.opensuse.org/search -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 06/16/2016 01:55 PM, Wolfgang Rosenauer wrote:
why Leap 42.1 was released with that? - Because Leap 42.1 is based on SLES12-SP1 as much as possible for the core platform (please read about Leap what it is)
I was discussing with pth and coolo at that time - given that coreutils doesn't have that dramatic changes - , yet it was considered too risky. Re. status=progress: you can still do it old way via sending USR1 as described in the Texinfo manual (at the end of the page): http://www.gnu.org/software/coreutils/dd Have a nice day, Berny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Thu, Jun 16, 2016 at 2:34 PM, Bernhard Voelker
Re. status=progress: you can still do it old way via sending USR1 as described in the Texinfo manual (at the end of the page):
Hello yes thanks I was already monitoring it via the kill usr1 means
sudo kill -USR1 $(pgrep ^dd)
Thanks for newer dd in next leap. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Op donderdag 16 juni 2016 13:48:48 CEST schreef cagsm:
Hello maintainers.
I would like to see some dd with progress meter :)
"pv" does that. pv openSUSE.iso | dd of=/dev/sdX ... -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Thursday 2016-06-16 13:48, cagsm wrote:
Hello maintainers.
I would like to see some dd with progress meter :) and found out that
You should just use ddrescue (gnu_ddrescue), also because it does not have the awkward conversion (conv=). -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 06/16/2016 07:18 PM, Jan Engelhardt wrote:
On Thursday 2016-06-16 13:48, cagsm wrote:
Hello maintainers.
I would like to see some dd with progress meter :) and found out that
You should just use ddrescue (gnu_ddrescue), also because it does not have the awkward conversion (conv=).
what do you mean? Would you elaborate on what's wrong with the "conv=..." option, please? You don't have to use it (if you don't want its functionality ... Each CONV symbol may be: ascii from EBCDIC to ASCII ebcdic from ASCII to EBCDIC ibm from ASCII to alternate EBCDIC block pad newline-terminated records with spaces to cbs-size unblock replace trailing spaces in cbs-size records with newline lcase change upper case to lower case ucase change lower case to upper case sparse try to seek rather than write the output for NUL input blocks swab swap every pair of input bytes sync pad every input block with NULs to ibs-size; when used with block or unblock, pad with spaces rather than NULs excl fail if the output file already exists nocreat do not create the output file notrunc do not truncate the output file noerror continue after read errors fdatasync physically write output file data before finishing fsync likewise, but also write metadata Have a nice day, Berny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Friday 2016-06-17 08:45, Bernhard Voelker wrote:
On 06/16/2016 07:18 PM, Jan Engelhardt wrote:
On Thursday 2016-06-16 13:48, cagsm wrote:
Hello maintainers.
I would like to see some dd with progress meter :) and found out that
You should just use ddrescue (gnu_ddrescue), also because it does not have the awkward conversion (conv=).
what do you mean?
Er, awkward options like count= (combined with bs=) which make you have to do convert byte offsets into sector-sized pieces, and damn you if the number of bytes to skip=, seek= or be transferred is a prime number. Well, these options may make sense in their own right, but just once again show that dd is not the tool anyone should be looking for. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 06/17/2016 09:28 AM, Jan Engelhardt wrote:
On Friday 2016-06-17 08:45, Bernhard Voelker wrote:
On 06/16/2016 07:18 PM, Jan Engelhardt wrote:
On Thursday 2016-06-16 13:48, cagsm wrote:
Hello maintainers.
I would like to see some dd with progress meter :) and found out that
You should just use ddrescue (gnu_ddrescue), also because it does not have the awkward conversion (conv=).
what do you mean?
Er, awkward options like count= (combined with bs=) which make you have to do convert byte offsets into sector-sized pieces, and damn you if the number of bytes to skip=, seek= or be transferred is a prime number. Well, these options may make sense in their own right, but just once again show that dd is not the tool anyone should be looking for.
Admittedly, calculations with count=, bs=, skip= and seek= can become complicated (while you may split it into 2 dd's, one for seeking and one for the actual reading), but this doesn't clarify why conv= would be awkward. After all, dd(1) is a general-purpose, low-level tool which is very powerful, so sure it not a tool anyone could use (without reading and understanding the manual). Have a nice day, Berny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 El 2016-06-17 a las 09:28 +0200, Jan Engelhardt escribió:
On Friday 2016-06-17 08:45, Bernhard Voelker wrote:
On 06/16/2016 07:18 PM, Jan Engelhardt wrote:
You should just use ddrescue (gnu_ddrescue), also because it does not have the awkward conversion (conv=).
what do you mean?
Er, awkward options like count= (combined with bs=) which make you have to do convert byte offsets into sector-sized pieces, and damn you if the number of bytes to skip=, seek= or be transferred is a prime number. Well, these options may make sense in their own right, but just once again show that dd is not the tool anyone should be looking for.
But why would you use them at all? - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAldjxGwACgkQja8UbcUWM1z1pwD/Zdxhq1fDQ7LRQ/yX+5stNC/N kf0mMo9rC4/oD2X5+7cA/1AvGByKfn/wB2flPu9swWysxe2MTDUzclr9sFQQiplr =3UqX -----END PGP SIGNATURE-----
On 06/17/2016 03:28 AM, Jan Engelhardt wrote:
On Friday 2016-06-17 08:45, Bernhard Voelker wrote:
On 06/16/2016 07:18 PM, Jan Engelhardt wrote:
On Thursday 2016-06-16 13:48, cagsm wrote:
Hello maintainers.
I would like to see some dd with progress meter :) and found out that
You should just use ddrescue (gnu_ddrescue), also because it does not have the awkward conversion (conv=).
what do you mean?
Er, awkward options like count= (combined with bs=) which make you have to do convert byte offsets into sector-sized pieces,
They're not awkward if you know what they're used for. I started work at a company that paid a programmer to write a program to convert CNC data files for a customer. It took a LONG time to do the conversion often started in the evening to run over night. I wrote a script using dd to do the same thing and it did the conversion about 50 times faster turning a 50 minute process into a one minute process. It's all about using the correct tool for the job at hand. -- Ken linux since 1994 S.u.S.E./openSUSE since 1996 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (8)
-
Bernhard Voelker -
cagsm -
Carlos E. R. -
Jan Engelhardt -
Ken Schneider -
Knurpht - Gertjan Lettink -
Patrick Shanahan -
Wolfgang Rosenauer