[opensuse-factory] systemd, failed to start udev
At every boot I get a failure message and it takes some time before the boot process finishes. I finally started to read through the error info and got following result: ---------------------------- #systemctl status systemd-udev-settle.service ● systemd-udev-settle.service - udev Wait for Complete Device Initialization Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2016-05-17 23:30:15 WIB; 20min ago Docs: man:udev(7) man:systemd-udevd.service(8) Process: 516 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/ FAILURE) Main PID: 516 (code=exited, status=1/FAILURE) May 17 23:30:15 bigone systemd[1]: systemd-udev-settle.service: Main process exited, code=exited, status=1/FAILURE May 17 23:30:15 bigone systemd[1]: Failed to start udev Wait for Complete Device Initialization. May 17 23:30:15 bigone systemd[1]: systemd-udev-settle.service: Unit entered failed state. May 17 23:30:15 bigone systemd[1]: systemd-udev-settle.service: Failed with result 'exit-code'. ------------------------------- It did not much togive a solution to the problem and reading the man pages udev and systemd-udevd.service did not help either. Could somebody with an understanding of my problem give me some guidance? Thanks beforehand Constant -- Linux User 183145 using Tumbleweed on a Pentium IV System : Linux 4.5.4-1.gdb90c25-default Distro : openSUSE 20160514 (x86_64) Desktop: KDE Frameworks: 5.21.0 and Plasma 5.6.3 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Tue, May 17, 2016 at 10:19 PM, C. Brouerius van Nidek
At every boot I get a failure message and it takes some time before the boot process finishes.
I finally started to read through the error info and got following result: ---------------------------- #systemctl status systemd-udev-settle.service ● systemd-udev-settle.service - udev Wait for Complete Device Initialization Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2016-05-17 23:30:15 WIB; 20min ago Docs: man:udev(7) man:systemd-udevd.service(8) Process: 516 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/ FAILURE) Main PID: 516 (code=exited, status=1/FAILURE)
May 17 23:30:15 bigone systemd[1]: systemd-udev-settle.service: Main process exited, code=exited, status=1/FAILURE May 17 23:30:15 bigone systemd[1]: Failed to start udev Wait for Complete Device Initialization. May 17 23:30:15 bigone systemd[1]: systemd-udev-settle.service: Unit entered failed state. May 17 23:30:15 bigone systemd[1]: systemd-udev-settle.service: Failed with result 'exit-code'. ------------------------------- It did not much togive a solution to the problem and reading the man pages udev and systemd-udevd.service did not help either.
Could somebody with an understanding of my problem give me some guidance?
Two problems here.. a) Nothing should pull systemd-udev-settle service .. it is a legacy hack..however some components still need it.. like dmraid and the lvm generator ..do you use any of those ? b) If the answer is yes to the above .. We need to figure out why it fails.. boot with "debug" in the kernel command line and post the output of journalctl -b in a bug report @ bugzilla . -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
18.05.2016 05:19, C. Brouerius van Nidek пишет:
At every boot I get a failure message and it takes some time before the boot process finishes.
I finally started to read through the error info and got following result: ---------------------------- #systemctl status systemd-udev-settle.service ● systemd-udev-settle.service - udev Wait for Complete Device Initialization Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2016-05-17 23:30:15 WIB; 20min ago Docs: man:udev(7) man:systemd-udevd.service(8) Process: 516 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/ FAILURE)
What happens if you run the same command manually? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Wednesday, May 18, 2016 6:30:55 AM WIB Andrei Borzenkov wrote:
18.05.2016 05:19, C. Brouerius van Nidek пишет:
At every boot I get a failure message and it takes some time before the boot process finishes.
I finally started to read through the error info and got following result: ---------------------------- #systemctl status systemd-udev-settle.service ● systemd-udev-settle.service - udev Wait for Complete Device Initialization> Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service;
static; vendor preset: disabled)
Active: failed (Result: exit-code) since Tue 2016-05-17 23:30:15 WIB; 20min
ago
Docs: man:udev(7)
man:systemd-udevd.service(8)
Process: 516 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/
FAILURE)
What happens if you run the same command manually?
Which command? -- Linux User 183145 using Tumbleweed on a Pentium IV System : Linux 4.6.0-1.gaf7ce24-default Distro : openSUSE 20160516 (x86_64) Desktop: KDE Frameworks: 5.21.0 and Plasma 5.6.3 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
18.05.2016 06:51, C. Brouerius van Nidek пишет:
On Wednesday, May 18, 2016 6:30:55 AM WIB Andrei Borzenkov wrote:
18.05.2016 05:19, C. Brouerius van Nidek пишет:
At every boot I get a failure message and it takes some time before the boot process finishes.
I finally started to read through the error info and got following result: ---------------------------- #systemctl status systemd-udev-settle.service ● systemd-udev-settle.service - udev Wait for Complete Device Initialization> Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service;
static; vendor preset: disabled)
Active: failed (Result: exit-code) since Tue 2016-05-17 23:30:15 WIB; 20min
ago
Docs: man:udev(7)
man:systemd-udevd.service(8)
Process: 516 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/
FAILURE)
What happens if you run the same command manually?
Which command?
E-h-h ... "/usr/bin/udevadm settle" of course. The one which exited with non-zero status according to "systemctl status" output you posted. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Wednesday, May 18, 2016 7:00:00 AM WIB Andrei Borzenkov wrote:
18.05.2016 06:51, C. Brouerius van Nidek пишет:
On Wednesday, May 18, 2016 6:30:55 AM WIB Andrei Borzenkov wrote:
18.05.2016 05:19, C. Brouerius van Nidek пишет:
At every boot I get a failure message and it takes some time before the boot process finishes.
I finally started to read through the error info and got following result: ---------------------------- #systemctl status systemd-udev-settle.service ● systemd-udev-settle.service - udev Wait for Complete Device Initialization>
Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service;
static; vendor preset: disabled)
Active: failed (Result: exit-code) since Tue 2016-05-17 23:30:15 WIB; 20min
ago
Docs: man:udev(7)
man:systemd-udevd.service(8)
Process: 516 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/
FAILURE)
What happens if you run the same command manually?
Which command?
E-h-h ... "/usr/bin/udevadm settle" of course. The one which exited with non-zero status according to "systemctl status" output you posted.
Command is run without any protest. -- Linux User 183145 using Tumbleweed on a Pentium IV System : Linux 4.6.0-1.gaf7ce24-default Distro : openSUSE 20160516 (x86_64) Desktop: KDE Frameworks: 5.21.0 and Plasma 5.6.3 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am 18.05.2016 um 07:04 schrieb C. Brouerius van Nidek:
On Wednesday, May 18, 2016 7:00:00 AM WIB Andrei Borzenkov wrote:
18.05.2016 06:51, C. Brouerius van Nidek пишет:
On Wednesday, May 18, 2016 6:30:55 AM WIB Andrei Borzenkov wrote:
18.05.2016 05:19, C. Brouerius van Nidek пишет:
At every boot I get a failure message and it takes some time before the boot process finishes.
I finally started to read through the error info and got following result: ---------------------------- #systemctl status systemd-udev-settle.service ● systemd-udev-settle.service - udev Wait for Complete Device Initialization>
Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service;
static; vendor preset: disabled)
Active: failed (Result: exit-code) since Tue 2016-05-17 23:30:15 WIB; 20min
ago
Docs: man:udev(7)
man:systemd-udevd.service(8)
Process: 516 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/
FAILURE)
What happens if you run the same command manually?
Which command?
E-h-h ... "/usr/bin/udevadm settle" of course. The one which exited with non-zero status according to "systemctl status" output you posted.
Command is run without any protest.
Is your signature up to date? Linux User 183145 using Tumbleweed on a Pentium IV System : Linux 4.6.0-1.gaf7ce24-default Distro : openSUSE 20160516 (x86_64) Desktop: KDE Frameworks: 5.21.0 and Plasma 5.6.3 according to it you are not running Tumbleweeds kernel which would be 4.5.4 - did you try the official kernel and / or do you have other non-offical repos activated which might cause this? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Wednesday, May 18, 2016 11:59:51 AM WIB tomtomme wrote:
Am 18.05.2016 um 07:04 schrieb C. Brouerius van Nidek:
On Wednesday, May 18, 2016 7:00:00 AM WIB Andrei Borzenkov wrote:
18.05.2016 06:51, C. Brouerius van Nidek пишет:
On Wednesday, May 18, 2016 6:30:55 AM WIB Andrei Borzenkov wrote:
18.05.2016 05:19, C. Brouerius van Nidek пишет:
At every boot I get a failure message and it takes some time before the boot process finishes.
I finally started to read through the error info and got following result: ---------------------------- #systemctl status systemd-udev-settle.service ● systemd-udev-settle.service - udev Wait for Complete Device Initialization>
Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service;
static; vendor preset: disabled)
Active: failed (Result: exit-code) since Tue 2016-05-17 23:30:15 WIB; 20min
ago
Docs: man:udev(7)
man:systemd-udevd.service(8)
Process: 516 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/
FAILURE)
What happens if you run the same command manually?
Which command?
E-h-h ... "/usr/bin/udevadm settle" of course. The one which exited with non-zero status according to "systemctl status" output you posted.
Command is run without any protest.
Is your signature up to date?
Linux User 183145 using Tumbleweed on a Pentium IV System : Linux 4.6.0-1.gaf7ce24-default Distro : openSUSE 20160516 (x86_64) Desktop: KDE Frameworks: 5.21.0 and Plasma 5.6.3
according to it you are not running Tumbleweeds kernel which would be 4.5.4 - did you try the official kernel and / or do you have other non-offical repos activated which might cause this?
I am running the latest stable kernel from http://download.opensuse.org/ repositories/Kernel:/stable/standard -- Linux User 183145 using Tumbleweed on a Pentium IV System : Linux 4.6.0-1.gaf7ce24-default Distro : openSUSE 20160516 (x86_64) Desktop: KDE Frameworks: 5.21.0 and Plasma 5.6.3 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (4)
-
Andrei Borzenkov -
C. Brouerius van Nidek -
Cristian Rodríguez -
tomtomme