I just did zypper dup on an i845G system, rebooted into runlevel 3 with the 2.6.36 kernel, logged in, did startx, logged out. 1-startx never exited, so I hit Ctrl-C to get a prompt back 2-did "Off", which is a shutdown alias. Entire output: 'umount: /root/.gvfx: not mounted' 3-on another tty I logged in as root, then init 0 10 minutes later the machine still shows on the root login's screen: ... Running /etc/init.d/halt.local Umounting fuse control filesystem The System Time is in sync with Hardware Clock Turning off swap files -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Monday, September 13, 2010 03:30:29 pm Felix Miata wrote:
I just did zypper dup on an i845G system, rebooted into runlevel 3 with the 2.6.36 kernel, logged in, did startx, logged out.
1-startx never exited, so I hit Ctrl-C to get a prompt back 2-did "Off", which is a shutdown alias. Entire output: 'umount: /root/.gvfx: not mounted' 3-on another tty I logged in as root, then init 0
10 minutes later the machine still shows on the root login's screen: ... Running /etc/init.d/halt.local Umounting fuse control filesystem The System Time is in sync with Hardware Clock Turning off swap files619754. Felix what message do you get if you do a shutdown from the Leave Icon. I have had a shutdown problem for a long time, tried alot but still cannot shut my 11.3 or 11.4 MS1 system down. See bug 619754, it may give you some ideas.
2.6.36-rc3-15-default (11.4 MS1) 2.6.34-12-default (11.3) Tried 2.6.35 and 36 here but no help. An earlier test on 11.3 (see comment #11 on above bug) showed system going into sleep mode but that was not set on leave options. yesterday tried that again, did not get to sleep mode, just powerdown. I have an Intel DX48BT2 motherboard. -- Russ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On 2010/09/13 16:02 (GMT-0700) upscope composed:
Felix what message do you get if you do a shutdown from the Leave Icon.
I normally boot runlevel 3. I set my KDE menu to only offer logout as a session exit method. Last line on successful startx exit starts with "NepomukServer(2510)/kdecore.... I'm unable so far to replicate unsuccessful startx exit.
I have had a shutdown problem for a long time, tried alot but still cannot shut my 11.3 or 11.4 MS1 system down. See bug 619754, it may give you some ideas.
Do you mean https://bugzilla.novell.com/show_bug.cgi?id=619754 ? If so, you should say so. Do you really expect if you can't be bothered to put in a complete clickable link that a reader wants do what you didn't? I know others here do it, but usually it means I ignore it instead of investigating unless I'm especially interested.
I have an Intel DX48BT2 motherboard.
Mine is much older. On my newest Intel I have no current room for Factory. My only other newer Intel has an AGP card installed, and also has no room for Factory until I decide to abandon 11.1 on it. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On 2010/09/13 18:30 (GMT-0400) Felix Miata composed:
I just did zypper dup on an i845G system, rebooted into runlevel 3 with the 2.6.36 kernel, logged in, did startx, logged out.
1-startx never exited, so I hit Ctrl-C to get a prompt back 2-did "Off", which is a shutdown alias. Entire output: 'umount: /root/.gvfx: not mounted' 3-on another tty I logged in as root, then init 0
10 minutes later the machine still shows on the root login's screen: ... Running /etc/init.d/halt.local Umounting fuse control filesystem The System Time is in sync with Hardware Clock Turning off swap files
After another hour of no change and since I could get no keyboard response of any kind, I used the power switch, which caused dirty filesystems on restart. Since then, I cannot reproduce. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Mon, Sep 13, 2010 at 06:30:29PM -0400, Felix Miata wrote:
I just did zypper dup on an i845G system, rebooted into runlevel 3 with the 2.6.36 kernel, logged in, did startx, logged out.
1-startx never exited, so I hit Ctrl-C to get a prompt back
Broken since ages, but years ago I heard the last complain about that. So there are still startx users around. Wow! Reminds me to Bug #632737 ... Best regards, Stefan Public Key available ------------------------------------------------------ Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstraße 5 FAX: 0911-740 53 479 D-90409 Nürnberg http://www.suse.de Germany ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) ----------------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On 2010/09/14 02:24 (GMT+0200) Stefan Dirsch composed:
On Mon, Sep 13, 2010 at 06:30:29PM -0400, Felix Miata wrote:
I just did zypper dup on an i845G system, rebooted into runlevel 3 with the 2.6.36 kernel, logged in, did startx, logged out.
1-startx never exited, so I hit Ctrl-C to get a prompt back
Broken since ages, but years ago I heard the last complain about that. So
I think it stopped being broken somewhere around 11.1.
there are still startx users around. Wow!
I typically boot Factory to runlevel 3 and when testing KDE typically don't care anything about the KDM login. Startx saves time there, but I also use startx -- :[1,2,n] regularly for web development to run different screen resolution(s) and/or DPI(s) from :0. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Mon, Sep 13, 2010 at 08:38:49PM -0400, Felix Miata wrote:
On 2010/09/14 02:24 (GMT+0200) Stefan Dirsch composed:
On Mon, Sep 13, 2010 at 06:30:29PM -0400, Felix Miata wrote:
I just did zypper dup on an i845G system, rebooted into runlevel 3 with the 2.6.36 kernel, logged in, did startx, logged out.
1-startx never exited, so I hit Ctrl-C to get a prompt back
Broken since ages, but years ago I heard the last complain about that. So
I think it stopped being broken somewhere around 11.1.
So it's broken again? Hmm ... no, I don't want to see a bugreport about this. Best regards, Stefan Public Key available ------------------------------------------------------ Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstraße 5 FAX: 0911-740 53 479 D-90409 Nürnberg http://www.suse.de Germany ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) ----------------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On 2010/09/13 18:30 (GMT-0400) Felix Miata composed:
I just did zypper dup on an i845G system, rebooted into runlevel 3 with the 2.6.36 kernel, logged in, did startx, logged out.
1-startx never exited, so I hit Ctrl-C to get a prompt back 2-did "Off", which is a shutdown alias. Entire output: 'umount: /root/.gvfx: not mounted' 3-on another tty I logged in as root, then init 0
10 minutes later the machine still shows on the root login's screen: ... Running /etc/init.d/halt.local Umounting fuse control filesystem The System Time is in sync with Hardware Clock Turning off swap files
This last try I had several nfs mountings and on tty3 tried rebooting via my Reboot alias (alias Reboot='cd; umount -a; shutdown -h now'). On running, it just sits there. On tty2, ps -A tail is: 2412 tty3 ... umount 2414 tty3 ... umount.nfs 2515 ? ... flush-0:22 2525 tty2 bash 2571 tty2 ps So it seems umount/umount.nfs is/are failing. Examining the mountpoints I see half of the 4 mountings (options in fstab: ro,noauto,nosuid,soft, rsize=8192,wsize=8192; nfs server running 11.2) got umounted while the other two did not. umount -t nfs -a succeeded, but left tty3 unchanged, and ps -A shows 2512 & 2514 still live. Attempting to 'mount -t nfs -a' to save tail of /var/log/messages to paste here failed outright. Subsequent 'shutdown -r now' also failed. 'init 6' seemed to work until reaching "Turning off swap files", when shutdown process stopped short of rebooting. Power button (dirty) restart was required to get the following /var/log/messages tail: Sep 13 23:47:07 gx260 avahi-daemon[1943]: Service "gx260" (/etc/avahi/services/sftp-ssh.service) successfully established. Sep 13 23:47:07 gx260 ntpd[2192]: ntpd 4.2.4p8@1.1612-o Thu Sep 9 22:54:37 UTC 2010 (1) Sep 13 23:47:07 gx260 ntpd[2193]: precision = 1.000 usec Sep 13 23:47:07 gx260 ntpd[2193]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16 Sep 13 23:47:07 gx260 ntpd[2193]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled Sep 13 23:47:07 gx260 ntpd[2193]: Listening on interface #1 wildcard, ::#123 Disabled Sep 13 23:47:07 gx260 ntpd[2193]: Listening on interface #2 eth0, fe80::260:94ff:fea3:2e3c#123 Enabled Sep 13 23:47:07 gx260 ntpd[2193]: Listening on interface #3 lo, ::1#123 Enabled Sep 13 23:47:07 gx260 ntpd[2193]: Listening on interface #4 lo, 127.0.0.1#123 Enabled Sep 13 23:47:07 gx260 ntpd[2193]: Listening on interface #5 lo, 127.0.0.2#123 Enabled Sep 13 23:47:07 gx260 ntpd[2193]: Listening on interface #6 eth0, 192.168.0.26#123 Enabled Sep 13 23:47:07 gx260 ntpd[2193]: kernel time sync status 2040 Sep 13 23:47:07 gx260 ntpd[2193]: frequency initialized 25.186 PPM from /var/lib/ntp/drift/ntp.drift Sep 13 23:47:07 gx260 /usr/sbin/cron[2204]: (CRON) STARTUP (V5.0) Sep 13 23:47:08 gx260 smartd[2254]: smartd 5.39.1 2010-01-28 r3054 [i686-pc-linux-gnu] (openSUSE RPM)#012Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net#012 Sep 13 23:47:08 gx260 smartd[2254]: Opened configuration file /etc/smartd.conf Sep 13 23:47:08 gx260 smartd[2254]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf Sep 13 23:47:08 gx260 smartd[2254]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices Sep 13 23:47:09 gx260 smartd[2254]: Device: /dev/sda, type changed from 'scsi' to 'sat' Sep 13 23:47:09 gx260 smartd[2254]: Device: /dev/sda [SAT], opened Sep 13 23:47:09 gx260 smartd[2254]: Device: /dev/sda [SAT], found in smartd database. Sep 13 23:47:09 gx260 smbd[2257]: [2010/09/13 23:47:09.653642, 0] smbd/server.c:500(smbd_open_one_socket) Sep 13 23:47:09 gx260 smbd[2257]: smbd_open_once_socket: open_socket_in: Address already in use Sep 13 23:47:09 gx260 smbd[2257]: [2010/09/13 23:47:09.654746, 0] smbd/server.c:500(smbd_open_one_socket) Sep 13 23:47:09 gx260 smbd[2257]: smbd_open_once_socket: open_socket_in: Address already in use Sep 13 23:47:09 gx260 smartd[2254]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list. Sep 13 23:47:09 gx260 smartd[2254]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.ST3160023A-4JS0L8FE.ata.state Sep 13 23:47:09 gx260 smartd[2254]: Monitoring 1 ATA and 0 SCSI devices Sep 13 23:47:09 gx260 smartd[2254]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.ST3160023A-4JS0L8FE.ata.state Sep 13 23:47:09 gx260 smartd[2262]: smartd has fork()ed into background mode. New PID=2262. Sep 13 23:47:44 gx260 kernel: [ 83.525845] FS-Cache: Loaded Sep 13 23:47:44 gx260 kernel: [ 83.638783] FS-Cache: Netfs 'nfs' registered for caching -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (3)
-
Felix Miata -
Stefan Dirsch -
upscope