[opensuse-factory] Xen-kernel with 42.1 gold not booting
Hi, finally I installed the gold ISO on one of my small "servers" (LENOVO ThinkCentre M58p 6137A1G), where I put in a new 2 TB SATA harddrive. On the old harddrive I have running openSUSE 11.4 (i586), kernel 3.0.101-99-xen and Xen 4.0.3_05-57.1. Installation went through fine, I selected ext4 for /boot and XFS for the rest, XFCE for the desktop and the first boot was working as expected. I installed all the Xen-stuff, didn't easily managed to boot it as default, so it booted the default kernel, still without problems. But when selecting the Xen Hypervisor entry, the system starts to boot, shows: (XEN) ACPI ... ... (XEN) System RAM: 9631 MB ... (XEN) *** LOADING DOMAIN 0 *** ... (XEN) Dom0 has maximum 2 VCPUs the screen get's dark and shows two more lines: [ 0.1902...] platform INT0000:00: failed to claim resource 0 [ 0.1903...] acpi INT0000:00 platform device creation failed: -16 The the screen goes dark and I have to switch off/on the system to get it running again :-( The last two lines I also get with the default kernel, just before the green splash-screen with the three dots, so this does not seem to be the problem. When I start the Xen kernel with "Advanced options - recovery" it goes a little bit further (at least it shows some more informations), here I get until: [ 0.22...] Unpacking initramfs... ... [ 1.63...] systemd[1]: Starting Apoly Kernel Variables... ... [ OK ] Started udev Kernel Device Manager. ... [ 1.551..] sda: sda1 sda2 sda3 sda4 <sda5> ... [ 1.557..] systemd[1]: Detected architecture 'x86-64'. [ 1.558..] systemd[1]: Running in initial RAM disk. Then again I get a black screen. Any ideas? Hardware is: LENOVO ThinkCentre M58p 6137A1G cpu: LGA 775 Intel Core 2 Duo CPU E8400 @ 3.00GHz graphics card: Lenovo ThinkCentre M6258 (Intel Q45/Q43, Driver: "i915") Intel 4 Series Chipset Integrated Graphics Controller sound: Intel 82801JD/DO (ICH10 Family) HD Audio Controller storage: Floppy disk controller Intel 4 Series Chipset PT IDER Controller Intel 82801JD/DO (ICH10 Family) SATA AHCI Controller network: Intel 82567LM-3 Gigabit Network Connection -- kind regards, Thorolf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Hi everybody,
But when selecting the Xen Hypervisor entry, the system starts to boot, shows: (XEN) ACPI ... ... (XEN) System RAM: 9631 MB ... (XEN) *** LOADING DOMAIN 0 *** ... (XEN) Dom0 has maximum 2 VCPUs
the screen get's dark and shows two more lines:
[ 0.1902...] platform INT0000:00: failed to claim resource 0 [ 0.1903...] acpi INT0000:00 platform device creation failed: -16
The the screen goes dark and I have to switch off/on the system to get it running again :-( ok, I installed again, this time I selected runlevel 3 for booting only and after finishing install (and fixing static network) I installed some (non-xen/kernel related) updates.
But the result remains the same, no boot with xen-kernel, no logs, no idea, nothing. Nobody has an idea how to resolve this issue? Thanks, -- kind regards, Thorolf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Hi, BTW, what is the "placeholder" in the grub.cfg be ment for? multiboot /xen-4.5.1_10-1.gz placeholder ${xen_rm_opts} echo 'Loading Linux 4.1.12-1-xen ...' module /vmlinuz-4.1.12-1-xen placeholder root=UUID=7e00c601-b8f5-..... resume=/dev/sda3 splash=silent quiet showopts vga=normal echo 'Loading initial ramdisk ...' module --nounzip /initrd-4.1.12-1-xen Thanks, -- kind regards, Thorolf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
05.11.2015 02:54, Thorolf Godawa пишет:
Hi,
BTW, what is the "placeholder" in the grub.cfg be ment for?
Good question; I /think/ it could be used as placeholder for the first argument; in case of "real" kernel GRUB implicitly adds BOOT_IMAGE=/path/to/kernel as the first argument. Unfortunately there are no comments in commit that added it.
multiboot /xen-4.5.1_10-1.gz placeholder ${xen_rm_opts} echo 'Loading Linux 4.1.12-1-xen ...' module /vmlinuz-4.1.12-1-xen placeholder root=UUID=7e00c601-b8f5-..... resume=/dev/sda3 splash=silent quiet showopts vga=normal echo 'Loading initial ramdisk ...' module --nounzip /initrd-4.1.12-1-xen
Thanks,
-- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (2)
-
Andrei Borzenkov
-
Thorolf Godawa