August 2023 - openSUSE Factory - openSUSE Mailing Lists

qt6, autoconf and lyx: help wanted
by Cor Blom 26 Aug '23

26 Aug '23

Hi all, I have a problem compiling lyx against qt6, both locally on my machine and in the buildservice. You can find the project here: https://build.opensuse.org/package/show/home:cornelisbb:lyx-unstable/lyx-qt6 I have asked the lyx devs for help, but they are baffled. It seems that qt6 on openSUSE behaves unexpected. It works find with cmake, though. (Yes, lyx supports both.) In the end I was asked to execute "qmake6 test.pro" (test.pro was a file they provided). It should provide a Makefile, but it did not. Nothing happened. Can someone provide some insight here? Are there programs in qt6 in OBS that use autoconf, so that I have something to compare? It seems there is something wrong with autoconf. The specific error is that files in the subdirectories of /usr/include/qt6 cannot be found. If I link the files into /usr/include/qt6 itself, they are found. Nothing strange is found in the config phase. Only during compilation. The error message is: [ 38s] GEN moc_Validator.cpp [ 38s] make all-am [ 38s] make[6]: Entering directory '/home/abuild/rpmbuild/BUILD/lyx-qt6-2.4.1692654261.fe74c24da9/src/frontends/qt' [ 38s] CXX ButtonPolicy.o [ 38s] CXX Dialog.o [ 38s] CXX DialogFactory.o [ 38s] CXX Action.o [ 38s] In file included from FindAndReplace.h:15, [ 38s] from DialogFactory.cpp:14: [ 38s] DockView.h:17:10: fatal error: QDockWidget: No such file or directory [ 38s] 17 | #include <QDockWidget> [ 38s] | ^~~~~~~~~~~~~ [ 38s] In file included from Dialog.cpp:15: [ 38s] GuiView.h:22:10: fatal error: QMainWindow: No such file or directory [ 38s] 22 | #include <QMainWindow> [ 38s] | ^~~~~~~~~~~~~ [ 38s] compilation terminated. Any help would be much appreciated. Thanks, Cor

2 2

openSUSE:Factory - Build fail notification
by DimStar / Dominique Leuenberger 26 Aug '23

26 Aug '23

Dear Package maintainers and hackers. Below package(s) in openSUSE:Factory have had problems for at least 4 weeks. We tried to send out notifications to the configured bugowner/maintainers of the package(s), but so far no fix has been submitted. This probably means that the maintainer/bugowner did not yet find the time to look into the matter and he/she would certainly appreciate help to get this sorted. - motion: Fails to build - python-snuggs: Fails to build Unless somebody is stepping up and submitting fixes, the listed package(s) are going to be removed from openSUSE:Factory. Kind regards, DimStar / Dominique Leuenberger <dimstar(a)opensuse.org>

2 1

new package: fsverity-utils
by David Disseldorp 25 Aug '23

25 Aug '23

Hi, fs-verity is a Linux kernel filesystem feature that does transparent on-demand verification of the contents of read-only files using Merkle trees. openSUSE Tumbleweed (ext4 + btrfs) and Leap (15.[45] ext4 only) ship with kernel support, but until now the corresponding user-space tools (fsverity-utils) have not been provided. These tools can be used to enable fs-verity on files, retrieve the digests of fs-verity files, and sign files for use with fs-verity (among other things). A devel project with the latest fsverity-utils 1.5 release is located at https://build.opensuse.org/package/show/filesystems/fsverity-utils I plan on submitting a request for openSUSE Factory inclusion in the coming days. Cheers, David Links: https://git.kernel.org/pub/scm/fs/fsverity/fsverity-utils.git https://www.kernel.org/doc/html/latest/filesystems/fsverity.html https://developers.facebook.com/blog/post/2021/10/19/fs-verity-support-in-b…

1 0

known bug qemu 8.0.4-1.2 ?
by Simon Becherer 25 Aug '23

25 Aug '23

Hi, is there a known bug for: my "windows xp" (2 pices) running in qemu (host is opensuse tumbleweed 20230822 amd ryzen processor) will not start any more after updating to qemu 8.0.4-1.2 last tumbleweed installed was 20230102 everything was working. "suse 10" starts, and "windows 10" starts. now if i try to start windows xp in save mode i see some drivers where loaded, suddenly it stops (after windows/system32/drivers/Mup.sys) but i did not know if windows xp start now some ore this driver or what else is the problem. and if, is there a work around? thanks, simoN -- www.becherer.de

1 2

Tumbleweed - Review of the week 2023/34
by Dominique Leuenberger 25 Aug '23

25 Aug '23

Dear Tumbleweed users and hackers, As announced on various channels, OBS services have been moved to a new location on new hardware. So the last check-in we could do was on Wednesday, building, and QA done before the move yesterday and then publishing it. As we managed to get the timing pretty right (which was more based on luck than anything else; timings for build and QA are only very rough estimates) we managed to publish 6 snapshots since the last review. At the moment, we do not yet have a new snapshot building, as the service migration seems to have left a few services in limbo – e.g. openQA is, up to the moment of this writing, not able to sync snapshots from OBS. So we rather slow down than risk sending out untested stuff. The six snapshots (0817, 0818, 0819, 0821, 0822, and 0823) delivered during the last week brought you these changes: * Mozilla Firefox 116.0.3 * OpenVPN 2.6.6 * Shadow 4.14.0 * KDE Frameworks 5.109.0 * Linux kernel 4.6.11 * LibreOffice 7.6.0.3 * GnuTLS 3.8.1 * gpgme 1.22.0 **PHP 8.2.9 As we are not building a new snapshot at the moment, the staging projects are getting filled up. We surely hope to be able to clean that up soon. The queue currently contains: * KDE Gear 23.08.0 * Systemd 254.1: We are waiting for 254.2 due to identified performance regressions * Keylime 7.5.0 * glibc fix for malloc: Enable merging of remainders in memalign, remove bin scanning from memalign * libproxy 0.5.3 (changing from 0.4.18): This is the rewrite maintained by Volkswagen Group * FMT 10: breaks mariadb boo#1213219 and ceph boo#1213217; help welcome * libxml2 2.11.x * doxygen 1.9.7 – breaks wxPython build Cheers, Dominique

1 0

New Tumbleweed snapshot 20230823 released!
by Dominique Leuenberger 24 Aug '23

24 Aug '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: apache2-mod_php8 (8.2.8 -> 8.2.9) gnutls (3.8.0 -> 3.8.1) gpgme (1.21.0 -> 1.22.0) gpgmeqt (1.21.0 -> 1.22.0) libupnp (1.14.17 -> 1.14.18) mutter php8 (8.2.8 -> 8.2.9) python-pexpect xz yast2-apparmor (4.6.1 -> 4.6.2) === Details === ==== apache2-mod_php8 ==== Version update (8.2.8 -> 8.2.9) - version update to 8.2.9 * This is a security release. * Fixes CVE-2023-3824 [bsc#1214103] and CVE-2023-3823 [bsc#1214106] * https://www.php.net/ChangeLog-8.php#8.2.9 - deleted patches - php-unicode-allow-redistribution.patch (upstreamed) - deleted sources - repack.sh (not needed) ==== gnutls ==== Version update (3.8.0 -> 3.8.1) Subpackages: libgnutls-dane0 libgnutls30 libgnutls30-32bit - Fix missing GNUTLS_NO_EXTENSIONS compatibility. * Upstream: gitlab.com/gnutls/gnutls/commit/abfa8634 * Add gnutls-GNUTLS_NO_EXTENSIONS-compatibility.patch - tests: Fix the SRP test that fails with SIGPIPE signal return due to a socket being closed before using it. * Add gnutls-srp-test-SIGPIPE.patch - Update to version 3.8.1: * libgnutls: ClientHello extensions are randomized by default To make fingerprinting harder, TLS extensions in ClientHello messages are shuffled. As this behavior may cause compatibility issue with legacy applications that do not accept the last extension without payload, the behavior can be reverted with the %NO_SHUFFLE_EXTENSIONS priority keyword. * libgnutls: Add support for RFC 9258 external PSK importer. This enables to deploy the same PSK across multiple TLS versions (TLS 1.2 and TLS 1.3) in a secure manner. To use, the application needs to set up a callback that formats the PSK identity using gnutls_psk_format_imported_identity(). * libgnutls: %GNUTLS_NO_EXTENSIONS has been renamed to %GNUTLS_NO_DEFAULT_EXTENSIONS. * libgnutls: Add additional PBKDF limit checks in FIPS mode as defined in SP 800-132. Minimum salt length is 128 bits and minimum iterations bound is 1000 for PBKDF in FIPS mode. * libgnutls: Add a mechanism to control whether to enforce extended master secret (RFC 7627). FIPS 140-3 mandates the use of TLS session hash (extended master secret, EMS) in TLS 1.2. To enforce this, a new priority keyword %FORCE_SESSION_HASH is added and if it is set and EMS is not set, the peer aborts the connection. This behavior is the default in FIPS mode, though it can be overridden through the configuration file with the "tls-session-hash" option. In either case non-EMS PRF is reported as a non-approved operation through the FIPS service indicator. * New option --attime to specify current time. To make testing with different timestamp to the system easier, the tools doing certificate verification now provide a new option - -attime, which takes an arbitrary time. * API and ABI modifications: gnutls_psk_client_credentials_function3: New typedef gnutls_psk_server_credentials_function3: New typedef gnutls_psk_set_server_credentials_function3: New function gnutls_psk_set_client_credentials_function3: New function gnutls_psk_format_imported_identity: New function GNUTLS_PSK_KEY_EXT: New enum member of gnutls_psk_key_flags * Rebase patches: - gnutls-FIPS-140-3-references.patch - gnutls-FIPS-jitterentropy.patch * Remove patches merged/fixed upstream: - gnutls-FIPS-PCT-DH.patch - gnutls-FIPS-PCT-ECDH.patch ==== gpgme ==== Version update (1.21.0 -> 1.22.0) Subpackages: libgpgme11 libgpgmepp6 - Fix builds with qt and qt6 [T6673]: * qt,tests: Fix build in source directory. Include Qt binding sources before C++ binding sources and C sources. This fixes the problem that the debug.h in the C sources was found before the one in the Qt bindings. * build: Suggest out-of-source build. Suggest to run configure from a build subdirectory. * Add patches: - gpgme-qt-tests-Fix-build-in-source-directory.patch - gpgme-build-Suggest-out-of-source-build.patch - Update to 1.22.0: * Prevent wrong plaintext when verifying clearsigned signature. * Return bad data error instead of general error on unexpected data. * Take care of offline mode for all operations of gpgsm engine. * Prepare the use of the forthcoming libassuan version 3. * New configure option --with-libtool-modification. * cpp: Expose gpgme_decrypt_result_t.is_mime. * qt: Clean up after failure or cancel of sign/encrypt archive operation. * qt: Add setInputEncoding to QGpgMe::EncryptJob. * qt: Make toLogString helper public. * Interface changes relative to the 1.21.0 release: - qt: EncryptJob::setInputEncoding NEW. - qt: DecryptionResult::isMime NEW. - qt: toLogString NEW. ==== gpgmeqt ==== Version update (1.21.0 -> 1.22.0) - Fix builds with qt and qt6 [T6673]: * qt,tests: Fix build in source directory. Include Qt binding sources before C++ binding sources and C sources. This fixes the problem that the debug.h in the C sources was found before the one in the Qt bindings. * build: Suggest out-of-source build. Suggest to run configure from a build subdirectory. * Add patches: - gpgme-qt-tests-Fix-build-in-source-directory.patch - gpgme-build-Suggest-out-of-source-build.patch - Update to 1.22.0: * Prevent wrong plaintext when verifying clearsigned signature. * Return bad data error instead of general error on unexpected data. * Take care of offline mode for all operations of gpgsm engine. * Prepare the use of the forthcoming libassuan version 3. * New configure option --with-libtool-modification. * cpp: Expose gpgme_decrypt_result_t.is_mime. * qt: Clean up after failure or cancel of sign/encrypt archive operation. * qt: Add setInputEncoding to QGpgMe::EncryptJob. * qt: Make toLogString helper public. * Interface changes relative to the 1.21.0 release: - qt: EncryptJob::setInputEncoding NEW. - qt: DecryptionResult::isMime NEW. - qt: toLogString NEW. ==== libupnp ==== Version update (1.14.17 -> 1.14.18) Subpackages: libixml11 libupnp17 - Update to release 1.14.18 * miniserver: fix busy loop on socket error ==== mutter ==== Subpackages: mutter-lang - Add mutter-revert-window_draw_issues.patch: Revert commit 43cee4b6: Do clipped redraws when drawing offscreen (boo#1210744, glgo#GNOME/mutter#2771). ==== php8 ==== Version update (8.2.8 -> 8.2.9) Subpackages: php8-cli php8-ctype php8-dom php8-gd php8-gettext php8-iconv php8-mbstring php8-mysql php8-openssl php8-pdo php8-sqlite php8-tokenizer php8-xmlreader php8-xmlwriter - version update to 8.2.9 * This is a security release. * Fixes CVE-2023-3824 [bsc#1214103] and CVE-2023-3823 [bsc#1214106] * https://www.php.net/ChangeLog-8.php#8.2.9 - deleted patches - php-unicode-allow-redistribution.patch (upstreamed) - deleted sources - repack.sh (not needed) ==== python-pexpect ==== - add 31fab7b0edbe9b3401507b5dfa4db6aaf3fabca5.patch dae602d37493bae239e0e8db5b3dabafebfd59db.patch: python 3.12 compat ==== xz ==== Subpackages: liblzma5 liblzma5-32bit xz-lang - xznew: Remove bashsism. - build: pass CONFIG_SHELL=/bin/sh to configure: the posix tools are setting the current SHELL as the shebang, which is overkill: any posix compliant shell, aka /bin/sh, is sufficient. ==== yast2-apparmor ==== Version update (4.6.1 -> 4.6.2) - bsc#1214418 - Fixed crash on internal error when scanning audit.log - 4.6.2

1 0

Who maintains each RPM package?
by Mark Rubin 23 Aug '23

23 Aug '23

Is there a canonical, publicly-accessible database which maps openSUSE RPMs to the group/person/URL/email that maintains them? Specifically, I'd like to report or track the current problem with `jupyter` pulling in all of `python310*` (despite everything required being in `python311`), but more generally some other longstanding issues like `transfig` pulling in over 2000 `texlive-*` packages, or `mate-terminal` not getting its required `libmate-desktop`. (On the latter, yes, I know: "It's too much trouble for packagers to know all their dependencies so they just rely on having their pattern installed". Sigh. I thought dependencies were the fundamental point of RPM -- or any package system -- but maybe that's just me.) I don't know if I'd get any progress on these kinds of non-fatal problems, but I'd at least like to know the maintainers were aware of them. Or should I just file a report on Bugzilla (or post here) instead?

7 8

Who maintains boxes at app.vagrantup.com ?
by Till Dörges 23 Aug '23

23 Aug '23

Hello all, not sure, whether this is the right place to ask. If not, please let me know. I was wondering who is in charge of these boxes https://app.vagrantup.com/opensuse ? Are these official openSUSE releases? IOW can I rely on them not containing any malicious code etc.? Thanks and regards -- Till -- Dipl.-Inform. Till Dörges doerges(a)pre-sense.de PRESENSE Technologies GmbH Nagelsweg 41, D-20097 HH Geschäftsführer/Managing Directors AG Hamburg, HRB 107844 Till Dörges, Jürgen Sander USt-IdNr.: DE263765024 Dieses Jahr sind wir wieder auf der *it-sa* in Nürnberg: 10.-12. Oktober 2023, Halle 7, Stand 227 https://www.itsa365.de/de-de/companies/p/presense-technologies-gmbh Wir freuen uns auf Ihren Besuch!

5 6

New Tumbleweed snapshot 20230822 released!
by Dominique Leuenberger 23 Aug '23

23 Aug '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: bluez brltty (6.5 -> 6.6) gdb gtk4 javapackages-tools libreoffice (7.6.0.2 -> 7.6.0.3) luajit mutter patterns-base plasma5-workspace tracker-miners yast2-trans (84.87.20230811.13616e3be9 -> 84.87.20230818.ea489402e5) === Details === ==== bluez ==== Subpackages: bluez-auto-enable-devices bluez-cups bluez-zsh-completion libbluetooth3 - Use %_firmwaredir ==== brltty ==== Version update (6.5 -> 6.6) Subpackages: brltty-driver-at-spi2 brltty-driver-brlapi brltty-driver-speech-dispatcher brltty-driver-xwindow brltty-lang libbrlapi0_8 python3-brlapi system-user-brltty xbrlapi - Add e6707d5e.patch: brlapi: Fix python crash on connection error. Cython 3.0 started using the new Python object finalization APIs from PEP 442. - Update to version 6.6: + Too many changes; please read ChangeLog - Update api_version. - Rebase brltty-udev-dir.patch. ==== gdb ==== - Drop libdebuginfod1 BuildRequires/Recommends. The former isn't needed because there's a build requirement on libdebuginfod-devel already, which will pull the shared library. And the latter, because it's bogus since RPM auto generated dependency will take care of that requirement. ==== gtk4 ==== Subpackages: gtk4-lang gtk4-schema gtk4-tools libgtk-4-1 typelib-1_0-Gtk-4_0 - Add 6af9dc86.patch: print: Revert "Start sorting apart includes" change for gtkprinteroptionprivate.h. ==== javapackages-tools ==== Subpackages: javapackages-filesystem - Modified patch: * javapackages-6.1.0-maven-depmap.patch + try to make the list of aliases more reproducible ==== libreoffice ==== Version update (7.6.0.2 -> 7.6.0.3) Subpackages: libreoffice-base libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-en_GB libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit - Update to 7.6.0.3 (official 7.6.0 release): https://wiki.documentfoundation.org/ReleaseNotes/7.6 https://wiki.documentfoundation.org/Releases/7.6.0/RC3 ==== luajit ==== - Update luajit-s390x.patch from gh#LuaJIT/LuaJIT#631 to the current form. ==== mutter ==== Subpackages: mutter-lang - Disable %autopatch on SLE which has not the macro ready. - Rebase mutter-SLE-bsc984738-grab-display.patch. - Drop mutter-Lower-HIDPI_LIMIT-to-144.patch (fate#326682, bsc#112546). The upstream has reworked the logic of scale factor selection based on actual screen size, see: https://gitlab.gnome.org/GNOME/mutter/-/commit/2f1dd049bfbbb60e0b3c2351e9ba… ==== patterns-base ==== Subpackages: patterns-base-apparmor patterns-base-base patterns-base-basesystem patterns-base-basic_desktop patterns-base-console patterns-base-enhanced_base patterns-base-minimal_base patterns-base-selinux patterns-base-sw_management patterns-base-transactional_base patterns-base-x11 patterns-base-x11_enhanced - move udev-configure-printer from enhanced_base to x11_enhanced Currently it pulls in Cups and Mesa dependencies the first is probably not really needed by default on servers and the second is certainly not desired there. Originally it was included for livecd's ==== plasma5-workspace ==== Subpackages: gmenudbusmenuproxy plasma5-session plasma5-session-wayland plasma5-workspace-lang plasma5-workspace-libs xembedsniproxy - Add patch to fix crash when opening windows (kde#473432) * 0001-TriangleMouseFilter-check-intercepted-item-still-exi.patch * 0002-TriangleMouseFilter-also-check-optional-position-has.patch ==== tracker-miners ==== Subpackages: tracker-miner-files tracker-miners-lang - Update + Fix the tracker miner spec file to build for SLE_15 + Rebase patch: tracker-miners-drop-syscalls-in-seccomp.patch ==== yast2-trans ==== Version update (84.87.20230811.13616e3be9 -> 84.87.20230818.ea489402e5) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sr yast2-trans-sv yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20230818.ea489402e5: * Translated using Weblate (Latvian) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan)

1 0

Blog post: news about Agama and ALP
by Ancor Gonzalez Sosa 23 Aug '23

23 Aug '23

After almost five months of radio silence, the YaST Team is back to blogging. Check the latest news about Agama (and how you can use it to install an early preview of ALP Dolomite) at https://yast.opensuse.org/blog/2023-08-21/agama3 Cheers. -- Ancor González Sosa YaST Team at SUSE Linux GmbH

2 1