April 2019 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Leap 15.1 Build 448.1 released!
by Ludwig Nussel 11 Apr '19

11 Apr '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.1&bui… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Distribution&q… When you reply to discuss some issues, make sure to change the subject. Please use the test plan at https://docs.google.com/spreadsheets/d/1AGKijKpKiJCB616-bHVoNQuhWHpQLHPWCb3… to record your testing efforts and use bugzilla to report bugs. Packages changed: SDL chrony flac gcc libvirt patterns-yast (20190228 -> 20190409) yast2-trans (84.87.20190330.92a2062d5c -> 84.87.20190406.98502195be) === Details === ==== SDL ==== - Add CVE-2019-7636.patch to fix a heap-based buffer over-read issue (CVE-2019-7636, boo#1124826, CVE-2019-7638, boo#1124824). - Add CVE-2019-7635.patch to fix a heap-based buffer over-read issue (CVE-2019-7635, boo#1124827). - Add CVE-2019-7578.patch to fix a heap-based buffer over-read issue (CVE-2019-7578, boo#1125099, CVE-2019-7576, boo#1124799 CVE-2019-7573, boo#1124805). - Add CVE-2019-7572.patch to fix a buffer over-read issue (CVE-2019-7572, boo#1124806). - Add CVE-2019-7574.patch to fix a heap-based buffer over-read issue (CVE-2019-7574, boo#1124803). - Add CVE-2019-7575.patch to fix a heap-based buffer overflow issue (CVE-2019-7575, boo#1124802). - Add CVE-2019-7577.patch to fix a buffer over-read issue (CVE-2019-7577, boo#1124800). - Add CVE-2019-7637.patch to fix a heap-based buffer overflow issue (CVE-2019-7637, boo#1124825). ==== chrony ==== - Fix ordering and dependencies of chronyd.service, so that it is started after name resolution is up (bsc#1129914). - Add chrony-service-ordering.patch ==== flac ==== - Fix memory leak in read_metadata_vorbiscomment_() function (CVE-2017-6888, bsc#1091045): flac-CVE-2017-6888.patch ==== gcc ==== - Fix gcc-PIE spec to properly honor -no-pie at link time. [bnc#1096008] ==== libvirt ==== Subpackages: libvirt-bash-completion libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-driver-interface libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-gluster libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-qemu libvirt-libs - CVE-2019-3886: disallow virDomainGetHostname and virDomainGetTime for read-only connections and users CVE-2019-3886-api.patch, CVE-2019-3886-remote.patch bsc#1131595 ==== patterns-yast ==== Version update (20190228 -> 20190409) Subpackages: patterns-yast-x11_yast patterns-yast-yast2_basis - Reintroduced the following change done by lnussel directly in OBS and overwritten by an automatic submission (bsc#1131492): * Recommend chrony instead of ntp (bsc#936378) - 20190409 ==== yast2-trans ==== Version update (84.87.20190330.92a2062d5c -> 84.87.20190406.98502195be) Subpackages: yast2-trans-ar yast2-trans-bg yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en yast2-trans-en_GB yast2-trans-en_US yast2-trans-eo yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-ko yast2-trans-lt yast2-trans-nb yast2-trans-nl yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ru yast2-trans-sk yast2-trans-sl yast2-trans-sv yast2-trans-uk yast2-trans-zh_CN yast2-trans-zh_TW - Update to version 84.87.20190406.98502195be: * New POT for text domain 'update'. * New POT for text domain 'samba-client'. * New POT for text domain 's390'. * New POT for text domain 'network'. * New POT for text domain 'control'. * Fix storage path displays in Arabic text, part 2 * Fix storage path displays in Arabic text * Fix alignment in Partitioner/Add NFS Client/Error pop-up (bsc#1128141) * New POT for text domain 'authserver'. * Translated using Weblate (Chinese (China)) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Catalan) - Update to version 84.87.20190404.a060a423f4: * New POT for text domain 'add-on'. * New POT for text domain 'autoinst'. * New POT for text domain 'control'. * New POT for text domain 'gtk'. * New POT for text domain 'installation'. * New POT for text domain 'packager'. * New POT for text domain 'registration'. * Translated using Weblate (Albanian) * Translated using Weblate (Arabic) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Czech) * Translated using Weblate (Dutch) * Translated using Weblate (French) * Translated using Weblate (German) * Translated using Weblate (Hungarian) * Translated using Weblate (Italian) * Translated using Weblate (Japanese) * Translated using Weblate (Korean) * Translated using Weblate (Polish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) * Translated using Weblate (Swedish) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20190409 released!
by Dominique Leuenberger 11 Apr '19

11 Apr '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: branding-openSUSE (15.0 -> 84.87.20180403) cpupower (4.19 -> 5.1) libguestfs logrotate (3.14.0 -> 3.15.0) parole (1.0.1 -> 1.0.2) php7 (7.3.3 -> 7.3.4) plymouth python-Pillow (5.4.1 -> 6.0.0) python-lxml (4.3.2 -> 4.3.3) python-zope.event (4.2.0 -> 4.4) python-zope.interface (4.5.0 -> 4.6.0) ristretto (0.8.3 -> 0.8.4) === Details === ==== branding-openSUSE ==== Version update (15.0 -> 84.87.20180403) Subpackages: grub2-branding-openSUSE libreoffice-branding-openSUSE plymouth-branding-openSUSE wallpaper-branding-openSUSE xfce4-splash-branding-openSUSE yast2-qt-branding-openSUSE - Rewrite the spec and makefile to make it easier to contibute - Change the default plymouth theme to bgrt ==== cpupower ==== Version update (4.19 -> 5.1) Subpackages: libcpupower0 - Update to latest kernel HEAD sources (5.1-rc4, 15ade5d2e7775667cf191cf2f94327a4889f8b9d) Patches included mainline: D cpupower_fix_compilation_and_sysfs_read_file_mess.patch D cpupower_bash-completion_for_cpupower_tool.patch Adjusted patches: M turbostat_makefile_fix_asm_header.patch M x86_perf_makefile_fix_asm_header.patch M rapl_monitor.patch M cpupower_rapl.patch ==== libguestfs ==== Subpackages: guestfs-data libguestfs0 python3-libguestfs - Fixing issue with virt-customize uninstall and '-l' (bnc#1131342) Patches added: fd43730e-error-with-uninstall-option-on-SUSE.patch ==== logrotate ==== Version update (3.14.0 -> 3.15.0) - Version update to 3.15.0: * timer unit: change trigger fuzz from 12h to 1h * service unit: only run if /var/log is mounted * preserve fractional part of timestamps when compressing * re-indent source code using spaces only * minage: avoid rounding issue while comparing the amount of seconds * never remove old log files if rotate -1 is specified * return non-zero exit status if a config file contains an error * make copytruncate work with rotate 0 * warn user if both size and the time interval options are used * pass rotated log file name as the 2nd argument of the postrotate script when sharedscript is not enabled * rename logrotate-default to logrotate.conf - Added asc file. ==== parole ==== Version update (1.0.1 -> 1.0.2) Subpackages: parole-lang - Spec file update: switch URL to new upstream docs - Spec File cleanup: - Switched to %autosetup %make_build to ease spec file maintanance - Dropped obsolete macros - Moved COPYING to %license - update to version 1.0.2 * Bug Fixes - Added support for GST_INSTALL_PLUGINS_HELPER_MISSING when attempting to install missing codecs (bxo#14529) - Fixed compiler error -Wcast-function-type (GCC 8) - Fixed disabling vendor-enabled plugins - Fixed crash when disabling plugins (lp#1698540) - Fixed play button sensitivity items are added to playlist (bxo#13724, lp#1705243) - Fixed Appstream validation by removing em tags (bxo#14260) - Fixed plugin active state when reopening the Plugins dialog - Resolved g_type_class_add_private warnings (bxo#15014) * Translation Updates ==== php7 ==== Version update (7.3.3 -> 7.3.4) Subpackages: apache2-mod_php7 php7-bcmath php7-bz2 php7-calendar php7-ctype php7-curl php7-dba php7-devel php7-dom php7-exif php7-fastcgi php7-ftp php7-gd php7-gettext php7-gmp php7-iconv php7-json php7-ldap php7-mbstring php7-mysql php7-odbc php7-openssl php7-pdo php7-pear php7-pgsql php7-shmop php7-snmp php7-sockets php7-sqlite php7-sysvsem php7-sysvshm php7-tidy php7-tokenizer php7-wddx php7-xmlreader php7-xmlwriter php7-xsl php7-zlib - updated to 7.3.4: This is a security release which also contains several bug fixes. See https://www.php.net/ChangeLog-7.php#7.3.4 ==== plymouth ==== Subpackages: libply-boot-client4 libply-splash-core4 libply-splash-graphics4 libply4 plymouth-dracut plymouth-plugin-label plymouth-plugin-label-ft plymouth-plugin-two-step plymouth-scripts - Change default openSUSE theme to bgrt ==== python-Pillow ==== Version update (5.4.1 -> 6.0.0) Subpackages: python2-Pillow python3-Pillow - Update to 6.0.0: * Python 2.7 support will be removed in Pillow 7.0.0 #3682 [hugovk] * Add EXIF class #3625 [radarhere] * Add ImageOps exif_transpose method #3687 [radarhere] * Added warnings to deprecated CMSProfile attributes #3615 [hugovk] * Documented reading TIFF multiframe images #3720 [akuchling] * Improved speed of opening an MPO file #3658 [Glandos] * Update palette in quantize #3721 [radarhere] * Improvements to TIFF is_animated and n_frames #3714 [radarhere] * Fixed incompatible pointer type warnings #3754 [radarhere] * Improvements to PA and LA conversion and palette operations #3728 [radarhere] * Consistent DPI rounding #3709 [radarhere] * Change size of MPO image to match frame #3588 [radarhere] * Read Photoshop resolution data #3701 [radarhere] * Ensure image is mutable before saving #3724 [radarhere] * Correct remap_palette documentation #3740 [radarhere] * Promote P images to PA in putalpha #3726 [radarhere] * Allow RGB and RGBA values for new P images #3719 [radarhere] * Fixed TIFF bug when seeking backwards and then forwards #3713 [radarhere] * Cache EXIF information #3498 [Glandos] * Added transparency for all PNG greyscale modes #3744 [radarhere] * Fix deprecation warnings in Python 3.8 #3749 [radarhere] * Fixed GIF bug when rewinding to a non-zero frame #3716 [radarhere] * Only close original fp in __del__ and __exit__ if original fp is exclusive #3683 [radarhere] * Fix BytesWarning in Tests/test_numpy.py #3725 [jdufresne] * Add missing MIME types and extensions #3520 [pirate486743186] * Add I;16 PNG save #3566 [radarhere] * Add support for BMP RGBA bitfield compression #3705 [radarhere] * Added ability to set language for text rendering #3693 [iwsfutcmd] * Only close exclusive fp on Image __exit__ #3698 [radarhere] * Changed EPS subprocess stdout from devnull to None #3635 [radarhere] * Add reading old-JPEG compressed TIFFs #3489 [kkopachev] * Add EXIF support for PNG #3674 [radarhere] * Add option to set dither param on quantize #3699 [glasnt] * Add reading of DDS uncompressed RGB data #3673 [radarhere] * Correct length of Tiff BYTE tags #3672 [radarhere] * Add DIB saving and loading through Image open #3691 [radarhere] * Removed deprecated VERSION #3624 [hugovk] * Fix 'BytesWarning: Comparison between bytes and string' in PdfDict #3580 [jdufresne] * Do not resize in Image.thumbnail if already the destination size #3632 [radarhere] * Replace .seek() magic numbers with io.SEEK_* constants #3572 [jdufresne] * Make ContainerIO.isatty() return a bool, not int #3568 [jdufresne] * Add support to all transpose operations for I;16 modes #3563, #3741 [radarhere] * Deprecate support for PyQt4 and PySide #3655 [hugovk, radarhere] * Add TIFF compression codecs: LZMA, Zstd, WebP #3555 [cgohlke] * Fixed pickling of iTXt class with protocol > 1 #3537 [radarhere] * _util.isPath returns True for pathlib.Path objects #3616 [wbadart] * Remove unnecessary unittest.main() boilerplate from test files #3631 [jdufresne] * Exif: Seek to IFD offset #3584 [radarhere] * Deprecate PIL.*ImagePlugin.__version__ attributes #3628 [jdufresne] * Docs: Add note about ImageDraw operations that exceed image bounds #3620 [radarhere] * Allow for unknown PNG chunks after image data #3558 [radarhere] * Changed EPS subprocess stdin from devnull to None #3611 [radarhere] * Fix possible integer overflow #3609 [cgohlke] * Catch BaseException for resource cleanup handlers #3574 [jdufresne] * Improve pytest configuration to allow specific tests as CLI args #3579 [jdufresne] * Drop support for Python 3.4 #3596 [hugovk] * Remove deprecated PIL.OleFileIO #3598 [hugovk] * Remove deprecated ImageOps undocumented functions #3599 [hugovk] * Depends: Update libwebp to 1.0.2 #3602 [radarhere] * Detect MIME types #3525 [radarhere] - Add dependency on libimagequant - Fix fdupes ==== python-lxml ==== Version update (4.3.2 -> 4.3.3) Subpackages: python-lxml-doc python2-lxml python3-lxml - Update to 4.3.3: * Fix leak of output buffer and unclosed files in ``_XSLTResultTree.write_output()``. ==== python-zope.event ==== Version update (4.2.0 -> 4.4) - update to version 4.4 * Add support for Python 3.6 and 3.7. * Drop support for Python 3.3. ==== python-zope.interface ==== Version update (4.5.0 -> 4.6.0) - update to version 4.6.0 * Add support for Python 3.7 * Fix verifyObject for class objects with staticmethods on Python 3. ==== ristretto ==== Version update (0.8.3 -> 0.8.4) Subpackages: ristretto-lang - Spec file update: * switched source and docs URL to https * changed docs URL according to upstream - Update to version 0.8.4 * Add missing field initializers * Instead of thumbnails, the same icons with a crossed red circle (bxo#13419) * Resolve g_type_class_add_private() deprecation * Glib-Critical errors to stdout: Source ID X was not found when attempting to remove it (bxo#15268) * Fix memory leak (bxo#12034) * Show file size in the status bar (bxo#14791) * Fix opening of PPM files (bxo#14709) * Translation updates: - Spec file clean up: dropped obsolete macros -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] bash syntax and /bin/sh
by Thorsten Kukuk 11 Apr '19

11 Apr '19

Hi, I don't want to bring up the discussion if /bin/sh is bash or not again, but: we have now a tumbleweed busybox base container. And of course, /bin/sh is not bash, but busybox. And of course, from the first 30 packages we tried to use to build derived containers, 3 packages failed in %pre/%post. Please make sure: if you use #!/bin/sh, don't use bash syntax. Or use #!/bin/bash as shell. So if you were missing a real usecase for the differentiation of /bin/sh, now you have one. Thorsten -- Thorsten Kukuk, Distinguished Engineer, Senior Architect SLES & MicroOS SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany GF: Felix Imendoerffer, Mary Higgins, Sri Rasiah, HRB 21284 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 18

[opensuse-factory] YaST: highlights of development sprint 75
by Ancor Gonzalez Sosa 10 Apr '19

10 Apr '19

Have you ever wondered how to develop a software that works flawlessly in all languages, including right-to-left ones like Arabic? We wonder it too! Those and other interesting topics (both user-centric and developer oriented) in the latest development report from the YaST Team at SUSE. Profit! https://lizards.opensuse.org/2019/04/10/yast-sprint-75/ Cheers -- Ancor González Sosa YaST Team at SUSE Linux GmbH -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] Virtualbox shared directories no longer work on TW guest since the last (20190403) update
by James PEARSON 10 Apr '19

10 Apr '19

Hello all Ever since I updated my TW guest installation to TW version 20190403 last week I am no longer able to access my guest directories on a Leap 15.0 (and a now a Leap 15.1) host Reason : IMO is because the vboxsf.ko module did not compile. This might be due to the fact the directory where the Virtualbox ko modules are stored has moved lately on the new 5.0.5-1 kernel from : /lib/modules/`uname -r`/extra # where shared directories pointing to a Leap host system work OK to /lib/modules/`uname -r`/misc # where shared directories pointing to a Leap host system do not work OK The following is from TW version 20190403 (i.e. virtualbox shared directories are KO) TW:/lib/modules/5.0.5-1-default/misc # ls -l total 13072 -rw-r--r-- 1 root root 13383560 Apr 4 22:50 vboxguest.ko TW:/lib/modules/5.0.5-1-default/misc # zypper info virtualbox Loading repository data... Reading installed packages... Information for package virtualbox: ----------------------------------- Repository : Dépôt principal (OSS) Name : virtualbox Version : 6.0.4-2.3 Arch : x86_64 Vendor : openSUSE Installed Size : 38.6 MiB Installed : No Status : not installed Source package : virtualbox-6.0.4-2.3.src Summary : VirtualBox is an Emulator The following provides more info concerning my current virtualbox setup with lastest version of TW (where guest directories on my Leap host no longer work) ############################ # Shared directories KO ############################ TW:~ # cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20190403" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" VERSION_ID="20190403" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20190403" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" # I was expecting the following grep to list vboxsf below but no such luck TW:~ # lsmod | grep vbox vboxvideo 40960 2 vboxguest 356352 4 ttm 114688 1 vboxvideo drm_kms_helper 204800 1 vboxvideo drm 499712 5 drm_kms_helper,vboxvideo,ttm TW:~ # TW:/lib/modules/5.0.5-1-default # cd /lib/modules/`uname -r`/misc TW:/lib/modules/5.0.5-1-default/misc # ls -trl total 13072 -rw-r--r-- 1 root root 13383560 Apr 4 22:50 vboxguest.ko TW:/lib/modules/5.0.5-1-default/misc # zypper info virtualbox Loading repository data... Reading installed packages... I have another setup on a sightly older TW VirtualBox guest installation as a backup and the my guest directories on my Leap 15.0 (and a now a Leap 15.1) host work fine. ############################ # Shared directories OK ############################ TW:/lib/modules/5.0.3-1-default/extra # cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20190325" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" VERSION_ID="20190325" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20190325" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" # The following grep lists vboxsf as it should # lsmod | grep vbox vboxsf 53248 1 vboxvideo 40960 2 ttm 114688 1 vboxvideo drm_kms_helper 204800 1 vboxvideo drm 499712 5 drm_kms_helper,vboxvideo,ttm vboxguest 356352 5 vboxsf TW:/lib/modules/5.0.3-1-default/extra # ls -trl /lib/modules/`uname -r`/extra total 744 -rw-r--r-- 1 root root 94507 Mar 24 22:25 vboxsf.ko ************************* -rw-r--r-- 1 root root 662691 Mar 24 22:25 vboxguest.ko Regards James -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] ANNOUNCEMENT: Xfce in Tumbleweed installer and Xfce live images
by Maurizio Galli (MauG) 10 Apr '19

10 Apr '19

Dear Geekos, We the openSUSE Xfce team have two cool announcements to make: 1) Since Tumbleweed snapshot 20190408, Xfce got much easier to install. Along with GNOME and KDE Plasma, Xfce can now be conveniently selected from the installer's main screen, from both DVD installer and NET installer. All this is combined with a carefully picked selection of packages that rounds off our offered system to get you started quickly and easily. Our Xfce team has invested a lot of work in the past months to optimize the desktop and the underlying rolling release of Tumbleweed. It features applications that better suit the desktop, as well as new modern themes that make the default experience refreshing and enjoyable. 2) Xfce live images are finally here! The live images give you a close look at the Xfce experience in openSUSE, which allows you to test and preview the system features. Ultimately, if you decide so, you can install the system directly from the live environment through the installer icon on the desktop. Xfce Live images are tested in openQA [1], which helps us provide quality and stability to the systems, and are available in both i586 and x86_64 architectures, easily accessible on https://software.opensuse.org [2]. If you end up using those images on USB stick, they will be persistent, so they are also an excellent way to get a portable and bootable drive with all your settings waiting for you the way you set them up yourself. Willing to join the team? Being small but passionate, openSUSE's Xfce team is always happy to welcome helping hands for testing, bug reporting, package maintaining, documentation and other tasks. But it's not limited to technical areas! We are constantly looking for ideas and creative developments to discuss, elaborate and implement. Check our wiki page [3] or just feel free to reach out to us! [1] Xfce Live ISO in openQA https://openqa.opensuse.org/tests/899602 [2] Live ISOs https://software.opensuse.org/distributions/tumbleweed#Live-ports [3] oS Xfce Team https://en.opensuse.org/openSUSE:Xfce_team Have a lot of fun! -- Maurizio Galli (MauG) Xfce Team https://en.opensuse.org/Portal:Xfce -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20190408 released!
by Dominique Leuenberger 10 Apr '19

10 Apr '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: 389-ds (1.4.1.1~git0.af9bb7206 -> 1.4.1.2~git0.9a126614a) ImageMagick (7.0.8.34 -> 7.0.8.37) aaa_base (84.87+git20190109.b66cf03 -> 84.87+git20190404.8684de3) akonadi-server apache2 (2.4.38 -> 2.4.39) avalon-framework awesfx (0.5.1e -> 0.5.2) bash bash-completion binutils bluedevil5 (5.15.3 -> 5.15.4) breeze (5.15.3 -> 5.15.4) breeze-gtk (5.15.3 -> 5.15.4) breeze4-style (5.15.3 -> 5.15.4) btrfsprogs busybox (1.26.2 -> 1.30.1) clamav (0.100.2 -> 0.101.2) discover (5.15.3 -> 5.15.4) drbd (9.0.16+git.ab9777df -> 9.0.17+git.b9abab2d) drkonqi5 (5.15.3 -> 5.15.4) e2fsprogs (1.44.5 -> 1.45.0) epiphany (3.30.3 -> 3.32.1.2) gimp glibc glibc gnome-chess (3.30.1 -> 3.32.0) gnome-mahjongg (3.22.0 -> 3.32.0) gnome-mines (3.30.1.1 -> 3.32.0) gnome-sudoku (3.30.0 -> 3.32.0) gpgme (1.12.0 -> 1.13.0) hdf5 iagno (3.30.0 -> 3.32.0) installation-images-Kubic (14.417 -> 14.420) iptables javapackages-tools jemalloc (5.1.0 -> 5.2.0) kactivitymanagerd (5.15.3 -> 5.15.4) kcm_sddm (5.15.3 -> 5.15.4) kde-cli-tools5 (5.15.3 -> 5.15.4) kde-gtk-config5 (5.15.3 -> 5.15.4) kde-user-manager (5.15.3 -> 5.15.4) kernel-source (5.0.5 -> 5.0.6) kgamma5 (5.15.3 -> 5.15.4) khotkeys5 (5.15.3 -> 5.15.4) kinfocenter5 (5.15.3 -> 5.15.4) kmenuedit5 (5.15.3 -> 5.15.4) kscreen5 (5.15.3 -> 5.15.4) kscreenlocker (5.15.3 -> 5.15.4) ksshaskpass5 (5.15.3 -> 5.15.4) ksysguard5 (5.15.3 -> 5.15.4) kwayland-integration (5.15.3 -> 5.15.4) kwin5 (5.15.3 -> 5.15.4) libcontainers-common (20190219 -> 20190401) libkdecoration2 (5.15.3 -> 5.15.4) libkscreen2 (5.15.3 -> 5.15.4) libksysguard5 (5.15.3 -> 5.15.4) libmysofa (0.6 -> 0.7) libqb (1.0.3+20190115.c880fcf -> 1.0.3+20190326.a521604) libreoffice libsolv (0.7.3 -> 0.7.4) libstorage-ng (4.1.103 -> 4.1.106) libuv (1.26.0 -> 1.27.0) libyajl libzypp (17.11.3 -> 17.11.4) links (2.18 -> 2.19) milou5 (5.15.3 -> 5.15.4) openal-soft (1.18.2 -> 1.19.1) openjpeg2 (2.3.0 -> 2.3.1) osinfo-db oxygen5 (5.15.3 -> 5.15.4) pcsc-lite (1.8.24 -> 1.8.25) perl-HTTP-Daemon (6.01 -> 6.04) perl-Mail-DKIM (0.40 -> 0.54) perl-Net-DNS (1.19 -> 1.20) perl-libwww-perl (6.37 -> 6.38) plasma-nm5 (5.15.3 -> 5.15.4) plasma5-addons (5.15.3 -> 5.15.4) plasma5-desktop (5.15.3 -> 5.15.4) plasma5-integration (5.15.3 -> 5.15.4) plasma5-openSUSE plasma5-pa (5.15.3 -> 5.15.4) plasma5-workspace (5.15.3 -> 5.15.4) polkit-kde-agent-5 (5.15.3 -> 5.15.4) postfix (3.3.3 -> 3.4.5) powerdevil5 (5.15.3 -> 5.15.4) python-Pygments python-argcomplete (1.9.4 -> 1.9.5) python-numpy python-pydot (1.2.4 -> 1.4.1) python-rpm-macros (20190315.d3034bf -> 20190402.c88be49) quadrapassel (3.22.0 -> 3.32.0) rubygem-rack (2.0.6 -> 2.0.7) schily suitesparse systemsettings5 (5.15.3 -> 5.15.4) taglib-extras telegram-purple (1.3.1 -> 1.4.1) update-alternatives virt-manager virtualbox (6.0.4_k5.0.3_1 -> 6.0.4_k5.0.6_1) wget (1.20.1 -> 1.20.2) wicked (0.6.53 -> 0.6.54) xen (4.12.0_07 -> 4.12.0_08) yast2-add-on (4.1.10 -> 4.1.11) yast2-bootloader (4.1.23 -> 4.1.24) yast2-installation (4.2.0 -> 4.2.2) yast2-network (4.1.44 -> 4.2.0) yast2-packager (4.2.1 -> 4.2.2) yast2-samba-client (4.1.1 -> 4.2.0) yast2-storage-ng (4.2.0 -> 4.2.3) yast2-trans (84.87.20190330.92a2062d5c -> 84.87.20190406.98502195be) zchunk (1.0.3 -> 1.1.0) === Details === ==== 389-ds ==== Version update (1.4.1.1~git0.af9bb7206 -> 1.4.1.2~git0.9a126614a) Subpackages: lib389 - fix permissions handling (boo#1120189) - Update to version 1.4.1.2~git0.9a126614a: * Removes sysconfig from RPM as we no longer create it to detect instance existance or settings. Older installs will still have their sysconfig parsed, but new installs should use systemd environment variables. * Bump version to 1.4.1.2 * Ticket 50308 - Revise memory leak fix * Ticket 50308 - Fix memory leaks for repeat binds and replication * Use PKG_CHECK_MODULES to detect the systemd library * Use PKG_CHECK_MODULES to detect the kerberos library * Use pkg-config from the host system to better support cross-compiling * Use PKG_CHECK_MODULES to detect the libsasl2 library * configure.ac: Add missing comma to an AC_ARG_ENABLE macro * configure.ac: Remove unpaired parentheses from two help strings * m4/doxygen.m4: Fix spelling of Doxygen in a message * Use PKG_CHECK_MODULES to detect the pcre library * Use PKG_CHECK_MODULES to detect the cmocka library * Use PKG_CHECK_MODULES to detect the nss library * Use PKG_CHECK_MODULES to detect the nspr library * Use PKG_CHECK_MODULES to detect the event library * Ticket 49873 - (cont 3rd) cleanup debug log * Ticket 49873 - (cont 2nd) Contention on virtual attribute lookup * Issue 50292 - Fix Plugin CLI and UI issues * Issue:50112 - Port ACI test suit from TET to python3(misc and syntax) * Ticket 50289 - Fix various database UI issues * Ticket 49463 After cleanALLruv, replication is looping on keep alive DEL * Ticket 50300 - Fix memory leak in automember plugin * Ticket 50265: the warning about skew time could last forever * Ticket 50260 - Invalid cache flushing improvements * Ticket 49561 - MEP plugin, upon direct op failure, will delete twice the same managed entry * Ticket 50077 - Do not automatically turn automember postop modifies on * Ticket 50282 - OPERATIONS ERROR when trying to delete a group with automember members * Ticket 49715 - extend account functionality * Ticket 49873: (cont) Contention on virtual attribute lookup * Ticket 50260 - backend txn plugins can corrupt entry cache * Ticket 50255 - Port password policy test to use DSLdapObject * Ticket 49667 - 49668 - remove old spec files * Issue 50276 - 389-ds-console is not built on RHEL8 if cockpit_dist is already present * Issue: 50112 - Port ACI test suit from TET to python3(Search) * Ticket 50259 - implement dn construction test * Ticket 50273 - reduce default replicaton agmt timeout * Ticket 50208 - lib389- Fix issue with list all instances * Issue: 50112 - Port ACI test suit from TET to python3(Global Group) * Issue 50041 - Add CLI functionality for special plugins * Issue 50263 - LDAPS port not listening after installation * Ticket 49575 - Indicate autosize value errors and corrective actions * Ticket 50137 - create should not check in non-stateful mode for exist * Ticket 49655 - remove doap file * Issue 50197 - Fix dscreate regression * Ticket 50234 - one level search returns not matching entry * Ticket 50257 - lib389 - password policy user vs subtree checks are broken * Issue: 50253 - Making an nsManagedRoleDefinition type in src/lib389/lib389/idm/nsrole.py * Issue 49029 - [RFE] improve internal operations logging * Ticket 50230 - improve ioerror msg when not root/dirsrv * Issue 50246 - Fix the regression in old control tools * Ticket 50197 - Container integration part 2 * Ticket 50197 - Container init tools * Ticket 50232 - export creates not importable ldif file * Ticket 50215 - UI - implement Database Tab in reachJS * Ticket 50243 - refint modrdn stress test * Ticket 50238 - Failed modrdn can corrupt entry cache * Ticket 50236 - memberOf should be more robust * Ticket 50213 - fix list instance issue * Issue: 50219 - Add generic filter to DSLdapObjects * Issue: 50227 - Making an cosClassicDefinition type in src/lib389/lib389/cos.py * Issue: 50112 - Port ACI test suit from TET to python3(modify) * Ticket 50224 - warnings on deprecated API usage * Issue:50112 - Port ACI test suit from TET to python3(valueaci) * Issue: 50112 Port ACI test suit from TET to python3(Aci Atter) * Ticket 50208 - make instances mark off based on dse.ldif not sysconfig * Issue: 50170 - composable object types for nsRole in lib389 * Ticket 50199 - disable perl by default * Issue:50211 - Making an actual Anonymous type in lib389/idm/account.py * Ticket 50155 - password history check has no way to just check the current password * Ticket 49873 - Contention on virtual attribute lookup * Ticket 50197 - Container integration improvements * Ticket 50195 - improve selinux error messages in interactive * Ticket 49658 - In replicated topology a single-valued attribute can diverge * Ticket 50111: Use pkg-config to detect icu * Ticket 50165 - Fix issues with dscreate * Ticket 50177 - import task should not be deleted too rapidely after import finishes to be able to query the status * Ticket 50140 - Use high ports in container installs * Ticket 50184 - Add cli tool parity to dsconf/dsctl * Ticket 50159 - sssd and config display ==== ImageMagick ==== Version update (7.0.8.34 -> 7.0.8.37) Subpackages: ImageMagick-config-7-SUSE ImageMagick-extra libMagick++-7_Q16HDRI4 libMagickCore-7_Q16HDRI6 libMagickWand-7_Q16HDRI6 perl-PerlMagick - version update to 7.0.8.37 * Fixed -virtual-pixel option (reference https://imagemagick.org/discourse-server/viewtopic.php?f=3&t=35789). * -draw image DstOver is now responsive to the composite operator (reference https://imagemagick.org/discourse-server/viewtopic.php?f=1&t=35650). * Fixed a number of issues (reference https://github.com/ImageMagick/ImageMagick/issues). ==== aaa_base ==== Version update (84.87+git20190109.b66cf03 -> 84.87+git20190404.8684de3) Subpackages: aaa_base-extras - Update to version 84.87+git20190404.8684de3: * Add two Scheme/LISP based shells to /etc/shells * /etc/profile does not work in AppArmor-confined containers (bsc#1096191) - Update to version 84.87+git20190307.00d332a: * update logic for JRE_HOME env variable (bsc#1128246) ==== akonadi-server ==== Subpackages: akonadi-server-lang akonadi-server-sqlite libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiPrivate5 libKF5AkonadiWidgets5 libKF5AkonadiXml5 - Add upstream patches to fix regressions when checking mail: * fix-regression-when-updating-attributes.patch * fix-collection-detaching.patch ==== apache2 ==== Version update (2.4.38 -> 2.4.39) Subpackages: apache2-devel apache2-doc apache2-example-pages apache2-prefork apache2-utils - version update to 2.4.39 * mod_proxy/ssl: Cleanup per-request SSL configuration anytime a backend connection is recycled/reused to avoid a possible crash with some SSLProxy configurations in <Location> or <Proxy> context. PR 63256. [Yann Ylavic] * mod_ssl: Correctly restore SSL verify state after TLSv1.3 PHA failure. [Michael Kaufmann <mail michael-kaufmann.ch>] * mod_log_config: Support %{c}h for conn-hostname, %h for useragent_host PR 55348 * mod_socache_redis: Support for Redis as socache storage provider. * core: new configuration option 'MergeSlashes on|off' that controls handling of multiple, consecutive slash ('/') characters in the path component of the request URL. [Eric Covener] * mod_http2: when SSL renegotiation is inhibited and a 403 ErrorDocument is in play, the proper HTTP/2 stream reset did not trigger with H2_ERR_HTTP_1_1_REQUIRED. Fixed. [Michael Kaufmann] * mod_http2: new configuration directive: `H2Padding numbits` to control padding of HTTP/2 payload frames. 'numbits' is a number from 0-8, controlling the range of padding bytes added to a frame. The actual number added is chosen randomly per frame. This applies to HEADERS, DATA and PUSH_PROMISE frames equally. The default continues to be 0, e.g. no padding. [Stefan Eissing] * mod_http2: ripping out all the h2_req_engine internal features now that mod_proxy_http2 has no more need for it. Optional functions are still declared but no longer implemented. While previous mod_proxy_http2 will work with this, it is recommeneded to run the matching versions of both modules. [Stefan Eissing] * mod_proxy_http2: changed mod_proxy_http2 implementation and fixed several bugs which resolve PR63170. The proxy module does now a single h2 request on the (reused) connection and returns. [Stefan Eissing] * mod_http2/mod_proxy_http2: proxy_http2 checks correct master connection aborted status to trigger immediate shutdown of backend connections. This is now always signalled by mod_http2 when the the session is being released. proxy_http2 now only sends a PING frame to the backend when there is not already one in flight. [Stefan Eissing] * mod_proxy_http2: fixed an issue where a proxy_http2 handler entered an infinite loop when encountering certain errors on the backend connection. See <https://bz.apache.org/bugzilla/show_bug.cgi?id=63170>. [Stefan Eissing] * mod_http2: Configuration directives H2Push and H2Upgrade can now be specified per Location/Directory, e.g. disabling PUSH for a specific set of resources. [Stefan Eissing] * mod_http2: HEAD requests to some module such as mod_cgid caused the stream to terminate improperly and cause a HTTP/2 PROTOCOL_ERROR. Fixes <https://github.com/icing/mod_h2/issues/167>. [Michael Kaufmann] * http: Fix possible empty response with mod_ratelimit for HEAD requests. PR 63192. [Yann Ylavic] * mod_cache_socache: Avoid reallocations and be safe with outgoing data lifetime. [Yann Ylavic] * MPMs unix: bind the bucket number of each child to its slot number, for a more efficient per bucket maintenance. [Yann Ylavic] * mod_auth_digest: Fix a race condition. Authentication with valid credentials could be refused in case of concurrent accesses from different users. PR 63124. [Simon Kappel <simon.kappel axis.com>] * mod_http2: enable re-use of slave connections again. Fixed slave connection keepalives counter. [Stefan Eissing] * mod_reqtimeout: Allow to configure (TLS-)handshake timeouts. PR 61310. [Yann Ylavic] * mod_proxy_wstunnel: Fix websocket proxy over UDS. PR 62932 <pavel dcmsys.com> * mod_ssl: Don't unset FIPS mode on restart unless it's forced by configuration (SSLFIPS on) and not active by default in OpenSSL. PR 63136. [Yann Ylavic] - deleted patches - apache2-mod_http2-issue-167.patch (upstreamed) - Reduce scriptlets' hard dependency on systemd. ==== avalon-framework ==== - Do not require optional dependencies ==== awesfx ==== Version update (0.5.1e -> 0.5.2) - Update to version 0.5.2: Added ALSA-native GUS patch loader (agusload) - Change URL to github ==== bash ==== Subpackages: bash-doc bash-lang - Add temporary fix from upstream for boo#1128936 - Add patch assignment-preceding-builtin.patch from upstream mailing list. Note that this break backward behaviour with bash-4.4 but implies that POSIX mode is more correct - Replace the temporary patch with official bash50-003 ==== bash-completion ==== - Removed bts completions (upcoming devscript package contains a more recent one). ==== binutils ==== Subpackages: binutils-devel - riscv-abi-check.patch: Don't check ABI flags if no code section ==== bluedevil5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: bluedevil5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== breeze ==== Version update (5.15.3 -> 5.15.4) Subpackages: breeze5-cursors breeze5-decoration breeze5-style breeze5-style-lang breeze5-wallpapers libbreezecommon5-5 - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Compute correct position of drag button press on X11 ==== breeze-gtk ==== Version update (5.15.3 -> 5.15.4) Subpackages: gtk2-metatheme-breeze gtk3-metatheme-breeze metatheme-breeze-common - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== breeze4-style ==== Version update (5.15.3 -> 5.15.4) Subpackages: libbreezecommon4-5 - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Compute correct position of drag button press on X11 - Add patch to fix build: * 0001-Fix-build-with-Qt-4.patch ==== btrfsprogs ==== Subpackages: btrfsprogs-udev-rules libbtrfs0 - Use correct path for dracut-fsck-help.txt in module-setup.sh (bsc#1122539) * Remove module-setup.sh * Add module-setup.sh.in ==== busybox ==== Version update (1.26.2 -> 1.30.1) - Implement rpm -E %_dbpath for kiwi (busybox-rpm-E.patch) - Don't require /bin/sh, be self contained - update to 1.30.1 * many bugfixes and new features - obsolete busybox-1.18.3-libarchive.patch - obsolete busybox-resource.patch - Update busybox*.config - Merge busybox.spec and busybox-static.spec and build the static binary as subpackage ==== clamav ==== Version update (0.100.2 -> 0.101.2) - Update to version 0.101.2 (bsc#1130721) * CVE-2019-1787: An out-of-bounds heap read condition may occur when scanning PDF documents. The defect is a failure to correctly keep track of the number of bytes remaining in a buffer when indexing file data. * CVE-2019-1789: An out-of-bounds heap read condition may occur when scanning PE files (i.e. Windows EXE and DLL files) that have been packed using Aspack as a result of inadequate bound-checking. * CVE-2019-1788: An out-of-bounds heap write condition may occur when scanning OLE2 files such as Microsoft Office 97-2003 documents. The invalid write happens when an invalid pointer is mistakenly used to initialize a 32bit integer to zero. This is likely to crash the application. * CVE-2019-1786: An out-of-bounds heap read condition may occur when scanning malformed PDF documents as a result of improper bounds-checking. * CVE-2019-1785: A path-traversal write condition may occur as a result of improper input validation when scanning RAR archives. * CVE-2019-1798: A use-after-free condition may occur as a result of improper error handling when scanning nested RAR archives. - added clamav-max_patch.patch to fix build - dropped clamav-freshclam-exit.patch - Update to version 0.101.1: * Add missing headers to fix build of packages against libclamav. - Add missing include for str.h to libclamav/others_common.c (clamav-str-h.patch) ==== discover ==== Version update (5.15.3 -> 5.15.4) Subpackages: discover-backend-flatpak discover-backend-packagekit discover-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Ignore source packages when adding them to the PK list * flatpak: disable dis/enabling sources (kde#404370) * fwupd: No need to make the code hard to read for no reason * Sources: Fix QML error when un/selecting a source * kns: wallpaperplugin.knsrc comes from plasma * Fix warning, don't catch object we don't need * Don't accept invalid KNS EntryInternal results * Fix --categories with delayed categories * Restore proper background color on list and sources pages * Don't allow refreshing during updates (kde#403333) * Use Attica forwarding headers ==== drbd ==== Version update (9.0.16+git.ab9777df -> 9.0.17+git.b9abab2d) - Upgrade to 9.0.17-1 * Fix UUID handling of a diskless primary that has not peer with usable data may not touch the current UUID * Fix resync-after dependencies; cross-resource dependencies and missing resources * Fix resync when the sync source suddenly connects to a more recent data set via an other connection and becomes sync target on that other connection; pause first resync; fix wrong display of negative resync progress percentage in this case * Fix volume numbers between 32767 and 65534 * Fix the data integrity implementation; it was broken since drbd-9.0 and reported only false positives * Fix for a corner-case when a promote action happens concurrently with a reconciliation resync * Improve resync code to be able to fully utilize fast storage backend devices and fast networks with resync traffic; as a side effect the settling time of the resync controller got shorter in for most cases * Show in the user-visible message who the opener is if if demote/down fails doe to someone holding a drbd device open * docker file for a "load drbd module container" and allow to disable user-mode-helpers, which is necessary for this container - Add patch fix-make-error.patch for build error of make against TW. ==== drkonqi5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: drkonqi5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Harmonize use of #if and #ifdef, using #if everywhere. * adjust the size of the window after the labels sizes were changed (kde#337319) ==== e2fsprogs ==== Version update (1.44.5 -> 1.45.0) Subpackages: e2fsprogs-devel libcom_err-devel libcom_err2 libcom_err2-32bit libext2fs-devel libext2fs2 - configure-Fix-autoheader-failure.patch: Fix autoheader failure - Update to 1.45.0 * Add support to force check at the next fsck run to tune2fs * Add e2scrub script to run e2fsck on LVM backed filesystem * Mke2fs will attempt to use ZERO_RANGE before PUNCH_HOLE so that we don't lose allocated blocks in preallocated files * Initial support for setting character set encoding * Add support for setting inode checksum to debugfs * Add support for specifying superblock location to e2image * Fix e4defrag to handle situation when files are created while it is running * Fix e2fsck to handle dirs > 2 GiB when largedir feature is enabled * Fix mke2fs huge file creation * Fix libext2fs to be more robust against invalid group descriptors * Fix mke2fs and debugfs to correctly copy files > 2 GiB * Fix memory leaks in debugfs, mke2fs, and e2freefrag ==== epiphany ==== Version update (3.30.3 -> 3.32.1.2) Subpackages: epiphany-lang gnome-shell-search-provider-epiphany - Update to version 3.32.1.2: + Recreate Safe Browsing database when it might be corrupted. + Update libdazzle subproject to improve compatibility with new meson versions. - Update to version 3.32.1.1: + Really bring back libdazzle subproject, for 3.32 branch only. - Update to version 3.32.1: + Switch to WebKit's two-finger back/forward swipe gesture. + Fix search highlight disappearing when repeating search. + Fix pages without title always appearing first in address bar dropdown. + Bring back libdazzle subproject for 3.32 branch only. + Fix new web apps being saved in wrong place under certain circumstances. + Fix web process settings being saved in the wrong place. - Update to version 3.32.0: + Fix preferences dialog crash. + Fix password manager crash on 32-bit systems. + Bump to libhandy 0.0.9. - Update to version 3.31.92: + Add animation when download completes. + New tab popover should close tabs on middle-click. + Fix context menu in history dialog. + Add separators to tab bar context menu. + Fix crash in mouse gesture controller. + Disable safe browsing test by default. + Improve reliability of password form detection. + Fix encoding dialog. + Restore unsafe process model and process count settings for 3.32 branch only. + Change -Dunit_tests meson option to feature rather than bool type. + Require system libdazzle and recent GTK 3.24. + Build libhandy as static lib. + Bundle newer libhandy to fix i18n. + Fix licence in appstream metadata to GPLv3+. - Update to version 3.31.91: + Fix test failure when not installed. + libhandy and libdazzle now use git submodules. + Improve tab bar style in incognito mode. - Update to version 3.31.90: + Hide new tab button in app mode. + Move all stored data to appropriate locations. + Middle-click on new tab button now loads URL from clipboard. + Animate to web app in GNOME shell overview after installing. + Fix next/previous accelerators in right-to-left locales. + Rename "New tab page" homepage option to "Most visited pages". + Animate downloads button instead of intrusively opening popover. + New three-finger swipe gesture for back/forward navigation. + Don't close menu when changing zoom. + Fix zoom in internal pages. + Fix some tests. + Fix crash setting web app title without hostname. + "Search the Web" -> "Search the web". + Tab menu is now a featureful popover. + Remove PDF support for now, not stable yet. + New shortcuts for reload bypassing cache and reader mode. + Fix crashes caused by password manager rework. + Fix crash when $XDG_CURRENT_DESKTOP is undefined. + Make find toolbar adaptive. + Make bookmarks import dialog adaptive. + Add tab menu for narrow mode. + Many CSS style improvements. + Fix too-tall switch in search engines dialog. + Remove process model and process count settings. + New design for security popover, appropriate for small screens. + Remove all deprecated settings and associated migrators. + Add setting to configure hardware acceleration policy. + Fix modified form submission warning. + Fix opening downloads under flatpak. - Drop epiphany-bookmark-ensure-tags-sequence-is-created.patch: Fixed upstream. - Add epiphany-bookmark-ensure-tags-sequence-is-created.patch: bookmark: ensure tags sequence is always created. Somehow we are getting EphyBookmarks objects deserialized without initializing the tags property. - Update to version 3.31.4: + Add default zoom level option to preferences dialog. + Double click on reader mode icon should not maximize window. + Move new tab button to start of the header bar, always. + Hide Help and About when running in Pantheon. + Reenable address bar DNS prefetch. + Add hidden setting to keep window open on Ctrl+W. + Fix file extension when saving a View Source page. + Add reload all tabs to tab context menu. + Remember last upload/download directory. + Highlight matching text in address bar dropdown. + History dialog should respect desktop 12/24 hour clock setting. + Add reload tab and reopen closed tab to tab context menu. + Convert all hostnames to lowercase. + Add support for viewing PDFs using libevince. + Add application manager to window menu. + Fix passwords dialog expanding after deleting password. + Hide various menu items from app mode. + Remove MIME type restrictions. + Remove broken bookmarks command line options. + Reenable some tests that were broken. + Open in new tab when middle clicking homepage button. + Monitor for changes to user CSS file. + Fix Ctrl+Shift+Page[Up,Down]. + Remove obsolete shortcuts documentation. + 127.0.0.1 and ::1 are now always considered secure. + Floating status bar no longer blocks clicks. + Add experimental support for mouse gestures. + Allow search the web context menu item in text fields. + Improve documentation of command line options. + Allow more zoom levels. + Adopt standard behavior for clicks with modifier keys pressed. + Add preference to disable smooth scrolling. + Use /etc/os-release to set distributor name. + Fix remote inspector. + Alt-number tab switching can no longer be intercepted. + Fix crash after bookmark sync. + Add --automation-mode, for control by WebKitWebDriver. + Use libhandy for improved narrow mode. + Make history and encoding dialogs responsive. + Don't show new fullscreen header bar for fullscreen videos. + Move copy/search items to the top of the context menu. - Add pkgconfig(libhandy-0.0) BuildRequires: New optional dependency. - Add pkgconfig(evince-document-3.0), pkgconfig(evince-view-3.0) and pkgconfig(gsettings-desktop-schemas) BuildRequires: New dependencies. - Update to version 3.31.3: + Improve padding in bookmarks view. + Do not show progress bar on empty new tabs. + Fix crash storing password on paypal.com. + Add column spacing to encoding dialog grid. + Fix suggestion entry not closing after Paste & Go. + Fix suggestion entry reopening after closed with Escape. + Tags with empty labels are no longer allowed in bookmarks. + Fix freeze when closing window or tabs when secondary process is hung. + Fix crash when web view has not loaded anything yet. + Temporarily disable hardware accelerated page rendering. + Stop lowercasing spellcheck and Accept-Langs locales. + Locales on language selection dialog are now displayed translated. + Locales on language selection dialog are no longer limited. + Several miscellaneous code improvements. - Changes from version 3.31.2: + Add preview widgets to file choosers. + Fix window height being saved incorrectly. + Fix crash when right clicking on tab bar. + Add Close Other Tabs tab bar context menu item. + Replace Move Tab Left/Right with Close Tabs to Left/Right. + Fix new tab improperly opened on Ctrl+L. + Fix URL entry accidently loading the wrong page. - Changes from version 3.31.1: + Add keyboard shortcut for reader mode. + Fix too many button being available for small windows in app mode. + Move password management from the web process to the UI process. + Fix Google Search in Russian localization and switch to google.ru. + Add preferences for reader mode and improve styling. + New, redesigned Epiphany icon. + New fancier address bar dropdown based on libdazzle. + Removed GNOME application menu. - Drop patches fixed upstream: + epiphany-window-Set-correct-current-height.patch: window: set correct current height. + epiphany-encoding-dialog-add-some-column-spacing.patch: encoding-dialog: add some column spacing to grid. + epiphany-web-view-Handle-NULL-URIs.patch: web-view: Handle NULL URIs in ephy_web_view_set_address(). + epiphany-Tags-with-empty-labels.patch: Tags with empty labels are no longer allowed in bookmarks. + epiphany-Fix-saving-web-app-icons.patch: Fix saving web app icons when changed. + epiphany-Fix-remote-inspector-support.patch: Fix remote inspector support. ==== gimp ==== Subpackages: gimp-lang gimp-plugin-aa gimp-plugins-python libgimp-2_0-0 libgimpui-2_0-0 - bsc#1130407: Remove dependency on JasPer. OpenJPEG is actually used. ==== glibc ==== - japanese-era-name-may-2019.patch: ja_JP locale: Add entry for the new Japanese era (BZ #22964) - Replace glibc_post_upgrade with lua script ==== glibc ==== Subpackages: glibc-devel glibc-extra glibc-info glibc-locale glibc-locale-base nscd - japanese-era-name-may-2019.patch: ja_JP locale: Add entry for the new Japanese era (BZ #22964) - Replace glibc_post_upgrade with lua script ==== gnome-chess ==== Version update (3.30.1 -> 3.32.0) Subpackages: gnome-chess-lang - Update to version 3.32.0: + Updated translations. - Update to version 3.31.92: + Add padding to bottom row of widgets. + Updates to user help. - Update to version 3.31.90: + Fix "computer player is confused" when CECP engine claims a draw. + Reworded claim draw dialog to reduce confusion when engine claims draw. + Fixed zombie engine processes not being properly reaped. + New icon! + Change app ID to org.gnome.Chess. - Update to version 3.31.3: + Replace app menu with window menu. + Rewrite the user help. + Updated translations. ==== gnome-mahjongg ==== Version update (3.22.0 -> 3.32.0) Subpackages: gnome-mahjongg-lang - Update to version 3.32.0: + Updated translations. - Update to version 3.31.92: + Localize date column of score list. + Updated translations. - Update to version 3.31.90: + Validate the AppStream metadata and .desktop file as build tests. + Miscellaneous cleanup. - Update to version 3.31.4: + Consistently use org.gnome.Mahjongg as app ID. + Fix pause button when clicking on game to unpause. + Miscellaneous improvements. + Updated translations. - Update to version 3.31.3: + Switch from autotools to meson. + Follow GNOME 3.32 app menu recommendations. + Add Keyboard Shortcuts overlay. + Hide Keyboard Shortcuts section in app help. + Add Flatpak manifest. + Stop using intltool. + Miscellaneous improvements. - Switch to meson buildsystem, add meson BuildRequires and macros. - Drop intltool BuildRequires, no longer needed. - Drop post(un) handling of glib2_gsettings_schema_post(un), desktop_database_post(un) and icon_theme_cache_post(un) and drop glib2_gsettings_schema_requires, no longer needed. - Drop update-desktop-files BuildRequires and suse_update_desktop_file macro, no longer needed. - Add fdupes BuildRequires and macro, remove duplicate files. ==== gnome-mines ==== Version update (3.30.1.1 -> 3.32.0) Subpackages: gnome-mines-lang - Update License to GPL-3.0-or-later. - Update to version 3.32.0: + Updated translations. - Update to version 3.31.92: + Updated translations. - Update to version 3.31.91: + Updated translations. - Update to version 3.31.90: + Added suggested appdata tags. + Tests to validate appdata and desktop. + Keyboard shortcuts page. + Automated builds using Gitlab CI. + Updated application icon. + Snap packaging updates. + Added in-game shortcuts to keyboard shortcuts window. + Updated translations. - Update to version 3.31.4.1: + Fixed crash when opening appearance dialog. + Add libmath dependency to possibly fix linking issues. - Drop update-desktop-files BuildRequires and macro: No longer needed. - Update to version 3.31.4: + Avoid unnecessary icon regeneration. + Extend css to cover tile theme images. + Fixed initial aspect ratio issues. + Change default theme to bgcolors. + Remove transitions for a snappier experience. + Add Keyboard shortcuts overlay. + Code cleanup. + Updated translations. - Update to version 3.31.3: + Avoid unnecessary icon regeneration. + Extend css to cover tile theme images. + Fixed initial aspect ratio issues. + Change default theme to bgcolors. + Remove transitions for a snappier experience. + Add Keyboard shortcuts overlay. + Code cleanup. + Updated translations. - Changes from version 3.31.1: + Appmenu removal. + Code cleanup. + Enjoy the victory after winning. ==== gnome-sudoku ==== Version update (3.30.0 -> 3.32.0) Subpackages: gnome-sudoku-lang - Update to version 3.32.0: + Updated translations. - Update to version 3.31.92: + Fix crash on print multiple sudokus dialog. + Updates to user help. - Update to version 3.31.90: + Updated app ID to org.gnome.Sudoku. - Update to version 3.31.1: + Removed the app menu. ==== gpgme ==== Version update (1.12.0 -> 1.13.0) Subpackages: libgpgme11 libgpgmepp6 libqgpgme7 - gpgme 1.13.0: * Support GPGME_AUDITLOG_DIAG for gpgsm * New context flag "trust-model". * Aligned the gpgrt-config code with our other libaries * Auto-check for all installed Python versions * Fixed generating card key in the C++ bindings * Fixed a segv due to bad parameters in genkey * Fixed crash if the plaintext is ignored in a CMS verify * Fixed test suite problems related to dtags * Fixed bunch of python bugs * Several fixes to the Common Lisp bindings * Fixed minor bugs in gpgme-json * Require trace level 8 to dump all I/O data * The compiler must now support variadic macros - drop gpgme-key-expirity.patch, included upstream ==== hdf5 ==== Subpackages: libhdf5-103 libhdf5_hl100 - Add _constraints to avoid transient build error ppc64le - Update URL: and Source: to use https://. - Like on PPC ignore transient 'make check' failures on aarch64. - Remove ringdisabled magic as hdf5 is no longer a ring package. This should resolve a number of problems in the review channels for Factory with packages requiring hdf5 libs. - Consolidate use of openmpi1, openmpi2, openmpi3 for non-HPC builds. ==== iagno ==== Version update (3.30.0 -> 3.32.0) Subpackages: iagno-lang - Update to version 3.32.0: + Unfullscreen button added. + Added some keyboard shortcuts to improve the keyboard play when using some locales. + Updated translations. - Update to version 3.31.91: + The user can now display the final state of the game, by undoing after (or during) the final animation; and this animation is also more reliable (it was randomly failing). Also, the Adwaita (blue) theme that is used as default already if the user changes GNOME settings to always use dark theme is now also default when the Gtk theme is Adwaita-dark. Other than that, many code cleanings and various small fixes (highlight, focus). + Updated translations. - Update to version 3.31.90: + Iagno switched to Meson. + Use the org.gnome.Reversi application-id. + Updated translations. - Switch to meson build system, add meson BuildRequires and macros. - Add itstool and vala BuildRequires: New dependencies. - Add explicit pkgconfig(gio-2.0) and pkgconfig(libcanberra) BuildRequires: align with what meson checks for. - Drop obsolete hicolor-icon-theme and yelp-tools BuildRequires: No longer needed. - Update to version 3.31.4: + The application menu has been retired and replaced by an hamburger menu. + Updated translations. ==== installation-images-Kubic ==== Version update (14.417 -> 14.420) - Add MicroOS flavor in addition to MicroOS theme introduced on Apr 1 - Add MicroOS to _multibuild - Fix specfile for MicroOS flavour introduced in 14.418 - disable SLES_SAP build (fcrozat) - merge gh#openSUSE/installation-images#306 - add more aarch64 modules (bsc#1129815) - 14.420 - merge gh#openSUSE/installation-images#305 - remove obsolete paragraph from doc - update git2log to latest version - inform user better about why things failed - fix archive creation with detached git HEAD state - 14.419 - merge gh#openSUSE/installation-images#303 - Establish MicroOS as seperate media, with Kubic as a derivative of MicroOS - 14.418 ==== iptables ==== Subpackages: libiptc0 libxtables12 xtables-plugins - Add iptables-1.8.2-dont_read_garbage.patch that fixes a situation where 'iptables -L' reads garbage from the struct as the kernel never filled it in the bugged case. This can lead to issues like mapping a few TiB of memory [bsc#1106751]. ==== javapackages-tools ==== Subpackages: javapackages-filesystem - Rename gradle-local and ivy-local to javapackages-gradle and javapackages-ivy and let them depend only on javapackages-tools and javapackages-local. These packages only install files produced during the javapackages-tools build. The dependencies will be pulled by gradle-local, ivy-local and maven-local meta-packages built in a separate spec file. - Split maven-local meta-package out of javapackages-tools spec file - Make the ivy-local and maven-local sub-packages depend on the right stuff, so that they actually can be used for building ==== jemalloc ==== Version update (5.1.0 -> 5.2.0) - Drop static library package, nothing seems to use it. - Remove openSUSE 11.1 build support. - Add disable-test_prof_log_many_traces-test.patch in order to workaround https://github.com/jemalloc/jemalloc/issues/1477. - Update to version 5.2.0: * New features: * Implement oversize_threshold, which uses a dedicated arena for allocations crossing the specified threshold to reduce fragmentation. * Add extents usage information to stats. * Log time information for sampled allocations. * Support 0 size in sdallocx. * Output rate for certain counters in malloc_stats. * Add mallctl interfaces: * opt.oversize_threshold * stats.arenas.<i>.extent_avail * stats.arenas.<i>.extents.<j>.n{dirty,muzzy,retained} * stats.arenas.<i>.extents.<j>.{dirty,muzzy,retained}_bytes * Optimizations and refactors: * Refactor the TSD module. * Implement opt.oversize_threshold which uses a dedicated arena for requests crossing the threshold, also eagerly purges the oversize extents. Default the threshold to 8 MiB. * Improve error handling for THP state initialization. * Refactor and optimize the tcache fill / flush paths. * Optimize sync / lwsync on PowerPC. * Bypass extent_dalloc() when retain is enabled. * Lower the default number of background threads to 4 (when the feature is enabled). * Use arena index for arena-matching checks. * Avoid forced decay on thread termination when using background threads. * Disable muzzy decay by default. * Only initialize libgcc unwinder when profiling is enabled. * Bug fixes: * Fix background thread index issues with max_background_threads. * Fix stats output for opt.lg_extent_max_active_fit. * Properly trigger decay on tcache destroy. * Detect whether explicit extent zero out is necessary with huge pages or custom extent hooks, which may change the purge semantics. * Fix a side effect caused by extent_max_active_fit combined with decay-based purging, where freed extents can accumulate and not be reused for an extended period of time. * Fix a missing unlock on extent register error handling. * Incompatible changes: * Remove --with-lg-page-sizes. - Change URL of the project. ==== kactivitymanagerd ==== Version update (5.15.3 -> 5.15.4) Subpackages: kactivitymanagerd-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== kcm_sddm ==== Version update (5.15.3 -> 5.15.4) Subpackages: kcm_sddm-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Fixed issue causing changed signal to be called with false argument (kde#403366) ==== kde-cli-tools5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: kde-cli-tools5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== kde-gtk-config5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: kde-gtk-config5-gtk2 kde-gtk-config5-gtk3 kde-gtk-config5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== kde-user-manager ==== Version update (5.15.3 -> 5.15.4) Subpackages: kde-user-manager-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== kernel-source ==== Version update (5.0.5 -> 5.0.6) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms kernel-vanilla - Linux 5.0.6 (bnc#1012628). - mt76x02u: use usb_bulk_msg to upload firmware (bnc#1012628). - bpf: do not restore dst_reg when cur_state is freed (bnc#1012628). - KVM: x86: update %rip after emulating IO (bnc#1012628). - KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts (bnc#1012628). - KVM: Reject device ioctls from processes other than the VM's creator (bnc#1012628). - x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y (bnc#1012628). - cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n (bnc#1012628). - watchdog: Respect watchdog cpumask on CPU hotplug (bnc#1012628). - powerpc/pseries/mce: Fix misleading print for TLB mutlihit (bnc#1012628). - powerpc/64: Fix memcmp reading past the end of src/dest (bnc#1012628). - powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes (bnc#1012628). - objtool: Query pkg-config for libelf location (bnc#1012628). - perf intel-pt: Fix TSC slip (bnc#1012628). - perf pmu: Fix parser error for uncore event alias (bnc#1012628). - mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate (bnc#1012628). - mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate() (bnc#1012628). - mm/memory_hotplug.c: fix notification in offline error path (bnc#1012628). - mm/debug.c: fix __dump_page when mapping->host is not set (bnc#1012628). - mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified (bnc#1012628). - iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging (bnc#1012628). - mm: add support for kmem caches in DMA32 zone (bnc#1012628). - mm/hotplug: fix offline undo_isolate_page_range() (bnc#1012628). - usb: typec: Fix unchecked return value (bnc#1012628). - usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps (bnc#1012628). - usb: cdc-acm: fix race during wakeup blocking TX traffic (bnc#1012628). - xhci: Don't let USB3 ports stuck in polling state prevent suspend (bnc#1012628). - usb: xhci: dbc: Don't free all memory with spinlock held (bnc#1012628). - xhci: Fix port resume done detection for SS ports with LPM enabled (bnc#1012628). - usb: host: xhci-rcar: Add XHCI_TRUST_TX_LENGTH quirk (bnc#1012628). - mm/memory.c: fix modifying of page protection by insert_pfn() (bnc#1012628). - usb: common: Consider only available nodes for dr_mode (bnc#1012628). - USB: gadget: f_hid: fix deadlock in f_hidg_write() (bnc#1012628). - usb: mtu3: fix EXTCON dependency (bnc#1012628). - phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs (bnc#1012628). - gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input (bnc#1012628). - gpio: exar: add a check for the return value of ida_simple_get fails (bnc#1012628). - drm/i915/icl: Fix the TRANS_DDI_FUNC_CTL2 bitfield macro (bnc#1012628). - drm/i915/gvt: Fix MI_FLUSH_DW parsing with correct index check (bnc#1012628). - drm/i915: Mark AML 0x87CA as ULX (bnc#1012628). - drm/vkms: fix use-after-free when drm_gem_handle_create() fails (bnc#1012628). - drm/vgem: fix use-after-free when drm_gem_handle_create() fails (bnc#1012628). - cpufreq: scpi: Fix use after free (bnc#1012628). - cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequency (bnc#1012628). - blk-mq: fix sbitmap ws_active for shared tags (bnc#1012628). - drivers/block/zram/zram_drv.c: fix idle/writeback string compare (bnc#1012628). - fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links (bnc#1012628). - Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc (bnc#1012628). - ACPI / CPPC: Fix guaranteed performance handling (bnc#1012628). - USB: serial: option: add Olicard 600 (bnc#1012628). - USB: serial: option: add support for Quectel EM12 (bnc#1012628). - USB: serial: option: set driver_info for SIM5218 and compatibles (bnc#1012628). - USB: serial: mos7720: fix mos_parport refcount imbalance on error path (bnc#1012628). - USB: serial: ftdi_sio: add additional NovaTech products (bnc#1012628). - USB: serial: cp210x: add new device id (bnc#1012628). - serial: sh-sci: Fix setting SCSCR_TIE while transferring data (bnc#1012628). - serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference (bnc#1012628). - serial: max310x: Fix to avoid potential NULL pointer dereference (bnc#1012628). - staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir() (bnc#1012628). - staging: erofs: fix error handling when failed to read compresssed data (bnc#1012628). - staging: erofs: fix to handle error path of erofs_vmap() (bnc#1012628). - staging: vt6655: Fix interrupt race condition on device start up (bnc#1012628). - staging: vt6655: Remove vif check from vnt_interrupt (bnc#1012628). - staging: speakup_soft: Fix alternate speech with other synths (bnc#1012628). - staging: olpc_dcon_xo_1: add missing 'const' qualifier (bnc#1012628). - staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest (bnc#1012628). - tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup (bnc#1012628). - tty: atmel_serial: fix a potential NULL pointer dereference (bnc#1012628). - tty: mxs-auart: fix a potential NULL pointer dereference (bnc#1012628). - tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped (bnc#1012628). - tty/serial: atmel: Add is_half_duplex helper (bnc#1012628). - drm/rockchip: vop: reset scale mode when win is disabled (bnc#1012628). - scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices (bnc#1012628). - scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host (bnc#1012628). - scsi: sd: Quiesce warning if device does not report optimal I/O size (bnc#1012628). - scsi: sd: Fix a race between closing an sd device and sd I/O (bnc#1012628). - ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock (bnc#1012628). - fs/open.c: allow opening only regular files during execve() (bnc#1012628). - kbuild: modversions: Fix relative CRC byte order interpretation (bnc#1012628). - ALSA: hda/realtek - Fix speakers on Acer Predator Helios 500 Ryzen laptops (bnc#1012628). - ALSA: hda/realtek: Enable headset MIC of ASUS X430UN and X512DK with ALC256 (bnc#1012628). - ALSA: hda/realtek: Enable headset mic of ASUS P5440FF with ALC256 (bnc#1012628). - ALSA: hda/realtek: Enable ASUS X441MB and X705FD headset MIC with ALC256 (bnc#1012628). - ALSA: hda/realtek - Add support for Acer Aspire E5-523G/ES1-432 headset mic (bnc#1012628). - ALSA: hda/realtek: Enable headset MIC of Acer Aspire Z24-890 with ALC286 (bnc#1012628). - ALSA: hda/realtek: Enable headset MIC of Acer AIO with ALC286 (bnc#1012628). - ALSA: hda/realtek - Add support headset mode for New DELL WYSE NB (bnc#1012628). - ALSA: hda/realtek - Add support headset mode for DELL WYSE AIO (bnc#1012628). - ALSA: hda/realtek: merge alc_fixup_headset_jack to alc295_fixup_chromebook (bnc#1012628). - ALSA: hda/realtek - Fixed Headset Mic JD not stable (bnc#1012628). - ALSA: pcm: Don't suspend stream in unrecoverable PCM state (bnc#1012628). - ALSA: pcm: Fix possible OOB access in PCM oss plugins (bnc#1012628). - ALSA: seq: oss: Fix Spectre v1 vulnerability (bnc#1012628). - ALSA: rawmidi: Fix potential Spectre v1 vulnerability (bnc#1012628). - net: dsa: qca8k: remove leftover phy accessors (bnc#1012628). - NFSv4.1 don't free interrupted slot on open (bnc#1012628). - NFS: fix mount/umount race in nlmclnt (bnc#1012628). - NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data() (bnc#1012628). - vfio: ccw: only free cp on final interrupt (bnc#1012628). - powerpc: bpf: Fix generation of load/store DW instructions (bnc#1012628). - ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time (bnc#1012628). - tracing: initialize variable in create_dyn_event() (bnc#1012628). - locks: wake any locks blocked on request before deadlock check (bnc#1012628). - Btrfs: fix assertion failure on fsync with NO_HOLES enabled (bnc#1012628). - btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size (bnc#1012628). - btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks (bnc#1012628). - btrfs: raid56: properly unmap parity page in finish_parity_scrub() (bnc#1012628). - btrfs: don't report readahead errors and don't update statistics (bnc#1012628). - btrfs: remove WARN_ON in log_dir_items (bnc#1012628). - Btrfs: fix incorrect file size after shrinking truncate and fsync (bnc#1012628). - powerpc/fsl: Fix the flush of branch predictor (bnc#1012628). - tun: add a missing rcu_read_unlock() in error path (bnc#1012628). - ila: Fix rhashtable walker list corruption (bnc#1012628). - r8169: fix cable re-plugging issue (bnc#1012628). - net: phy: don't clear BMCR in genphy_soft_reset (bnc#1012628). - net: mii: Fix PAUSE cap advertisement from linkmode_adv_to_lcl_adv_t() helper (bnc#1012628). - net: dsa: mv88e6xxx: fix few issues in mv88e6390x_port_set_cmode (bnc#1012628). - thunderx: eliminate extra calls to put_page() for pages held for recycling (bnc#1012628). - thunderx: enable page recycling for non-XDP case (bnc#1012628). - vxlan: Don't call gro_cells_destroy() before device is unregistered (bnc#1012628). - vrf: prevent adding upper devices (bnc#1012628). - tun: properly test for IFF_UP (bnc#1012628). - tipc: fix cancellation of topology subscriptions (bnc#1012628). - tipc: change to check tipc_own_id to return in tipc_net_stop (bnc#1012628). - tipc: allow service ranges to be connect()'ed on RDM/DGRAM (bnc#1012628). - tcp: do not use ipv6 header for ipv4 flow (bnc#1012628). - sctp: use memdup_user instead of vmemdup_user (bnc#1012628). - sctp: get sctphdr by offset in sctp_compute_cksum (bnc#1012628). - rhashtable: Still do rehash when we get EEXIST (bnc#1012628). - packets: Always register packet sk in the same order (bnc#1012628). - net: usb: aqc111: Extend HWID table by QNAP device (bnc#1012628). - net-sysfs: call dev_hold if kobject_init_and_add success (bnc#1012628). - net: stmmac: fix memory corruption with large MTUs (bnc#1012628). - net: rose: fix a possible stack overflow (bnc#1012628). - net: phy: meson-gxl: fix interrupt support (bnc#1012628). - net/packet: Set __GFP_NOWARN upon allocation in alloc_pg_vec (bnc#1012628). - net: datagram: fix unbounded loop in __skb_try_recv_datagram() (bnc#1012628). - net: aquantia: fix rx checksum offload for UDP/TCP over IPv6 (bnc#1012628). - mISDN: hfcpci: Test both vendor & device ID for Digium HFC4S (bnc#1012628). - mac8390: Fix mmio access size probe (bnc#1012628). - ipv6: make ip6_create_rt_rcu return ip6_null_entry instead of NULL (bnc#1012628). - gtp: change NET_UDP_TUNNEL dependency to select (bnc#1012628). - genetlink: Fix a memory leak on error path (bnc#1012628). - dccp: do not use ipv6 header for ipv4 flow (bnc#1012628). - netfilter: nf_tables: fix set double-free in abort path (bnc#1012628). - Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer (bnc#1012628). - Bluetooth: Check L2CAP option sizes returned from l2cap_get_conf_opt (bnc#1012628). - commit dff56e4 - efifb: Omit memory map check on legacy boot (bsc#1127339). - commit 0b95959 - Revert "drm/i915/fbdev: Actually configure untiled displays" (bsc#1129027, bsc#1131048). - commit 591a6df - config: arm64: enable CPPC support - commit 1a52e49 ==== kgamma5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: kgamma5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== khotkeys5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: khotkeys5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== kinfocenter5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: kinfocenter5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Clean up generated config-*.h files ==== kmenuedit5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: kmenuedit5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== kscreen5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: kscreen5-lang kscreen5-plasmoid - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== kscreenlocker ==== Version update (5.15.3 -> 5.15.4) Subpackages: kscreenlocker-lang libKScreenLocker5 - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== ksshaskpass5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: ksshaskpass5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== ksysguard5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: ksysguard5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== kwayland-integration ==== Version update (5.15.3 -> 5.15.4) - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== kwin5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: kwin5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Force server-side decoration if no borders are forced by user (kde#405385) * [platforms/x11] Force glXSwapBuffers to block with NVIDIA driver * Properly restore current desktop from session (kde#390295) * [platforms/fbdev] Use a better way to correct activating framebuffer devices ==== libcontainers-common ==== Version update (20190219 -> 20190401) - Update to libpod v1.2.0 * Rootless Podman can now be used with a single UID and GID, without requiring a full 65536 UIDs/GIDs to be allocated in /etc/subuid and /etc/subgid * Move pkg/util default storage functions from libpod to containers/storage - Update to image v1.5 * Minor behind the scene bugfixes, no user facing changes - Update to storage v1.12.1 * Move pkg/util default storage functions from libpod to containers/storage * containers/storage no longer depends on containers/image - Version 20190401 ==== libkdecoration2 ==== Version update (5.15.3 -> 5.15.4) Subpackages: libkdecorations2-5 libkdecorations2-5-lang libkdecorations2private6 - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== libkscreen2 ==== Version update (5.15.3 -> 5.15.4) Subpackages: libKF5Screen7 libkscreen2-plugin - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== libksysguard5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: libksysguard5-helper libksysguard5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== libmysofa ==== Version update (0.6 -> 0.7) - Update to version 0.7 * fixed two important security holes CVE-2019-10672 boo#1131106 * fixed bug mysofa_interpolate when interpolation is not needed * fixed bug with simple hrtf lookup * added advanced open function and various enhancements * fixed memory leak in lookup.c - Drop libmysofa-0-gnu-install-dirs.patch - Add libmysofa-0-pkgconfig-paths.patch ==== libqb ==== Version update (1.0.3+20190115.c880fcf -> 1.0.3+20190326.a521604) - Drop manual requires from libqb-tests. - Let libqb-devel depend on the exact package, libqb20 not just a virtual libqb provide. - Drop redundant %if..%endif guards that do not affect the build. - Update to version 1.0.3+20190326.a521604: - enable building / shipping of libqb-tests.rpm (bsc#1131328) ==== libreoffice ==== Subpackages: libreoffice-base libreoffice-base-drivers-firebird libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-en_GB libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-pt_BR libreoffice-l10n-ru libreoffice-l10n-zh_CN libreoffice-l10n-zh_TW libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit - Add patch to fix diff in generated helpfiles with rebuilds: * 0001-Use-sort-on-finds-to-improve-deterministic-build.patch ==== libsolv ==== Version update (0.7.3 -> 0.7.4) Subpackages: libsolv-devel libsolv-tools python3-solv ruby-solv - repo_add_rpmdb: do not copy bad solvables from the old solv file - fix cleandeps updates not updating all packages - experimental DISTTYPE_CONDA and REL_CONDA support - bump version to 0.7.4 ==== libstorage-ng ==== Version update (4.1.103 -> 4.1.106) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - merge gh#openSUSE/libstorage-ng#633 - make get_displayname available (to_s is overridden by use_ostream) - added unit tests - coding style - fixed class names - make get_displayname() available in ruby - 4.1.106 - Translated using Weblate (Portuguese (Brazil)) - 4.1.105 - Translated using Weblate (Swedish) - 4.1.104 - Translated using Weblate (Spanish) - Translated using Weblate (Slovak) - Translated using Weblate (Russian) - Translated using Weblate (Polish) - Translated using Weblate (Korean) - Translated using Weblate (Italian) - Translated using Weblate (Hungarian) - Translated using Weblate (German) - Translated using Weblate (Dutch) - Translated using Weblate (Czech) - Translated using Weblate (Catalan) - Translated using Weblate (Arabic) - Translated using Weblate (Arabic) ==== libuv ==== Version update (1.26.0 -> 1.27.0) - update to 1.27.0 * doc: describe unix signal handling better (Vladim�r ?un�t) * linux: use statx() to obtain file birth time (Ben Noordhuis) * src: fill sockaddr_in6.sin6_len when it's defined (Santiago Gimeno) * test: relax uv_hrtime() test assumptions (Ben Noordhuis) * build: make cmake install LICENSE only once (Thomas Karl Pietrowski) * bsd: plug uv_fs_event_start() error path fd leak (Ben Noordhuis) * doc: add note about uv_run() not being reentrant (Ben Noordhuis) * unix, win: make fs-poll close wait for resource cleanup (Anna Henningsen) * doc: fix typo in uv_thread_options_t definition (Ryan Liptak) * win: skip winsock initialization in safe mode (evgley) * unix: refactor getsockname/getpeername methods (Santiago Gimeno) * udp: add support for UDP connected sockets (Santiago Gimeno) * build: add missing header (cjihrig) * test: change spawn_stdin_stdout return to void (Andrew Paprocki) * test: remove call to floor() in test driver (Andrew Paprocki) ==== libyajl ==== - Install pkgconfig into libdir instead of datadir with libyajl-pkgconfig.patch - Use autosetup and cmake_build macro - Rename macro soname to sover ==== libzypp ==== Version update (17.11.3 -> 17.11.4) - Enhance scanning /sys for modaliases (bsc#1130161) - version 17.11.4 (9) - Prevent SEGV if the application sets an empty TextLocale (bsc#1127026) - Fix build with CMake >= 3.14.0: Starting with CMake 3.14, EXCLUDE_FROM_ALL now spreads from directories to targets. 'make -C someSubdir' when 'someSubdir' uses the 'EXCLUDE_FROM_ALL' keyword does nothing. (gh/libzypp#libzypp#165) ==== links ==== Version update (2.18 -> 2.19) - links 2.19 * Fixed a crash on invalidn IDN URLs * Make font selection possible via fontconfig * Show certificate authority in Document info box * Use international error messages * The -dump switch didn't report errors on stdout write ==== milou5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: milou5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== openal-soft ==== Version update (1.18.2 -> 1.19.1) - Trim bias from description, trim metadata duplication from description, trim main description repetition in lesser subpackages' description. Spruce up summaries. Fix SRPM group. - Add missing Requires inside baselibs.conf. - Remove insatisfiable Recommends. Add Provides/Conflicts for the move of makehrtf. - Packaging changes: * Move makehrtf from the devel package to a separate package, as it is the only part not under LGPL (or MIT). * Move the remaining tools and data files to separate packages, to get the License tag correct, and make the data files noarch. * Use https in Url and Source tags. - Update to 1.19.1 * The changes from 1.19.0 include: - Implemented capture support for the SoundIO backend. - Fixed source buffer queues potentially not playing properly when a queue entry completes. - Fixed possible unexpected failures when generating auxiliary effect slots. - Fixed a crash with certain reverb or device settings. - Fixed OpenSL capture. - Improved output limiter response, better ensuring the sample amplitude is clamped for output. * The changes from 1.18.2 include: - Implemented the ALC_SOFT_device_clock extension. - Implemented the Pitch Shifter, Frequency Shifter, and Autowah effects. - Fixed compiling on FreeBSD systems that use freebsd-lib 9.1. - Fixed compiling on NetBSD. - Fixed the reverb effect's density scale and panning parameters. - Fixed use of the WASAPI backend with certain games, which caused odd COM initialization errors. - Increased the number of virtual channels for decoding Ambisonics to HRTF output. - Changed 32-bit x86 builds to use SSE2 math by default for performance. Build-time options are available to use just SSE1 or x87 instead. - Replaced the 4-point Sinc resampler with a more efficient cubic resampler. - Renamed the MMDevAPI backend to WASAPI. - Added support for 24-bit, dual-ear HRTF data sets. The built-in data set has been updated to 24-bit. - Added a 24- to 48-point band-limited Sinc resampler. - Added an SDL2 playback backend. Disabled by default to avoid a dependency on SDL2. - Improved the performance and quality of the Chorus and Flanger effects. - Improved the efficiency of the band-limited Sinc resampler. - Improved the Sinc resampler's transition band to avoid over-attenuating higher frequencies. - Improved the performance of some filter operations. - Improved the efficiency of object ID lookups. - Improved the efficienty of internal voice/source synchronization. - Improved AL call error logging with contextualized messages. - Removed the reverb effect's modulation stage. Due to the lack of reference for its intended behavior and strength. ==== openjpeg2 ==== Version update (2.3.0 -> 2.3.1) - Update to version 2.3.1: * Fix CVE-2018-6616 (bsr#1079845) * Fix CVE-2018-5785 (bsc#1076967) * Fix CVE-2018-18088 (bsc#1111638) * Fix CVE-2018-16375 (bsc#1106882) * Fix CVE-2018-14423 (bsc#1102016) * Fix CVE-2018-7648 (bsc#1083901) * Fix CVE-2018-5727 (bsc#1076314) * For full list see ChangeLog file - Remove install-fix.patch: upstreamed ==== osinfo-db ==== - Add support for Caasp40 media add-caasp40-support.patch ==== oxygen5 ==== Version update (5.15.3 -> 5.15.4) - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== pcsc-lite ==== Version update (1.8.24 -> 1.8.25) Subpackages: libpcsclite1 - Updated to version 1.8.25 * Fix a socket issue when pcscd is used inside LXC container * pcsc-spy: always provide a total time of execution * Fix resource leak if SCardEstablishContext() fails * Fix realloc(3) error handling (possible memory leak) * Remove usage of function chmod(2) to use fchmod(2) (fix race condition) ==== perl-HTTP-Daemon ==== Version update (6.01 -> 6.04) - updated to 6.04 see /usr/share/doc/packages/perl-HTTP-Daemon/Changes 6.04 2019-04-02 13:09:45Z - Remove circular dependency on LWP::RobotUA introduced in 6.02 (GH#29) (Olaf Alders) - updated to 6.03 see /usr/share/doc/packages/perl-HTTP-Daemon/Changes ==== perl-Mail-DKIM ==== Version update (0.40 -> 0.54) - updated to 0.54 see /usr/share/doc/packages/perl-Mail-DKIM/ChangeLog - - VERSION 0.54 -- 2018-10-12: Marc Bradshaw <marc(a)marcbradshaw.net> * The T tag on arcseal is not required - - VERSION 0.53 -- 2018-05-27: Marc Bradshaw <marc(a)marcbradshaw.net> * Make tests less dependent on local resolver setup * Add thanks to Valimail - - VERSION 0.52 -- 2018-01-12: Marc Bradshaw <marc(a)marcbradshaw.net> * Internet connection tests were declared in the wrong order - - VERSION 0.51 -- 2018-01-12: Marc Bradshaw <marc(a)marcbradshaw.net> * Fix for older versions of perl * Tests no longer fail with no internet connection - - VERSION 0.50 -- 2017-12-16: Marc Bradshaw <marc(a)marcbradshaw.net> * Added Strict mode to DKIM verifier * Code formatting fixes 2017-12-14: John Levine <john.levine(a)standcore.com> * Make ARC code work a lot better * Add new arcsign.pl and arcverify.pl scripts - - VERSION 0.44 -- 2017-10-19: Marc Bradshaw <marc(a)marcbradshaw.net> * Added experimental support for ARC - - VERSION 0.43 -- 2017-09-20: Marc Bradshaw <marc(a)marcbradshaw.net> * Update tests for new DNS setup - - VERSION 0.42 -- 2017-07-29: Marc Bradshaw <marc(a)marcbradshaw.net> * Fix failing tests - - VERSION 0.41 -- 2017-04-14: Marc Bradshaw <marc(a)marcbradshaw.net> * commit aac893fdbaa7f8ccd5d37fa7f20d1785406cda51 Author: Marc Bradshaw <marc(a)marcbradshaw.net> Date: Fri Mar 17 14:53:53 2017 +1100 Avoid use of $_ in read loop RT 106485: Mail::DKIM::PrivateKey->load tampering $_ and <FILE> * commit 06934f259e392b2a3cf94560e6051d9e522d0bf3 Author: Marc Bradshaw <marc(a)marcbradshaw.net> Date: Fri Mar 17 14:44:44 2017 +1100 Ensure PrivateKey file is closed properly. Store PrivateKey file handle in lexical variable and close it once we are done. RT 120638: Mail::DKIM::PrivateKey does not close FILE * commit 9e7c1c4cb78a6cb1cf396ece4379c7ed2c44c974 Author: Marc Bradshaw <marc(a)marcbradshaw.net> Date: Fri Feb 27 12:08:11 2015 +1100 Allow greater control over signed headers * commit 8291c034dc7db4394e9df80e70b8cbe8428a38c2 Author: Marc Bradshaw <marc(a)marcbradshaw.net> Date: Fri Jan 23 09:54:02 2015 +1100 Allow greater control over which headers are signed by Signer 2013-02-07: Jason Long <jlong(a)messiah.edu> * lib/Mail/DKIM/Verifier.pm (add_signature): call fetch_public_key() iff the signature passes a validity check; (finish_header): set result to 'invalid' if signature does not have a result * lib/Mail/DKIM/Signature.pm (check_protocol): now returns a list of supported protocols, or an empty list if no supported protocols found. 2013-02-06: Jason Long <jlong(a)messiah.edu> * t/corpus/good_83176.txt: add new email to test suite; this email contains a signature with a LIST of query methods, one of which is good, but the rest should be quietly ignored. This test currently fails. * lib/Mail/DKIM/Signature.pm (check_protocol): support multiple methods being specified in signatures q= tag. We look for dns/txt to occur anywhere in the field; all other values are ignored. - - VERSION 0.40 -- ==== perl-Net-DNS ==== Version update (1.19 -> 1.20) - updated to 1.20 see /usr/share/doc/packages/perl-Net-DNS/Changes ==== perl-libwww-perl ==== Version update (6.37 -> 6.38) - updated to 6.38 see /usr/share/doc/packages/perl-libwww-perl/Changes 6.38 2019-03-25 18:58:58Z - Update Net::HTTP dependency from 6.07 to 6.18 (GH#310) (Olaf Alders) - Remove s.c.o. from SYNOPSIS (GH#308) (Olaf Alders) ==== plasma-nm5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: plasma-nm5-lang plasma-nm5-openconnect plasma-nm5-openvpn plasma-nm5-pptp plasma-nm5-vpnc - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Do not remove manually configured "route-metric" property from IPv4 and IPv6 setting (kde#406118) * Applet: fix size of the busy indicator (kde#405962) * OpenVPN: reneg-sec property doesn't need limitation (kde#404614) ==== plasma5-addons ==== Version update (5.15.3 -> 5.15.4) Subpackages: plasma5-addons-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * [Media Frame] Set sourceSize for higher quality and lower memory consumption ==== plasma5-desktop ==== Version update (5.15.3 -> 5.15.4) Subpackages: plasma5-desktop-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Harmonize use of HAVE_X11, using cmakedefine01. * Use camelcase KPeople headers, they do work. * [KickerDash] Add missed argument in addFavorite * [Kicker] Fix "Tooltip can not be displayed" (kde#390804) * [Desktop Theme KCM] Emit current index change when resetting the model * [Pager] Shrink label font size dynamically * [Splash KCM] Sort "None" first ==== plasma5-integration ==== Version update (5.15.3 -> 5.15.4) Subpackages: plasma5-integration-plugin plasma5-integration-plugin-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== plasma5-openSUSE ==== Subpackages: plasma5-defaults-openSUSE plasma5-theme-openSUSE plasma5-workspace-branding-openSUSE sddm-theme-openSUSE - Update to 5.15.4 ==== plasma5-pa ==== Version update (5.15.3 -> 5.15.4) Subpackages: plasma5-pa-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== plasma5-workspace ==== Version update (5.15.3 -> 5.15.4) Subpackages: gmenudbusmenuproxy plasma5-session plasma5-session-wayland plasma5-workspace-lang plasma5-workspace-libs xembedsniproxy - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Fix prior commit that broke the build * Change default Klipper behavior to accept images * [service runner] throw out kde3 "compat" code (kde#383287) * [KSplashQML] Register DBus before loading the splash theme * [notifications] Prevent subpixel font placement ==== polkit-kde-agent-5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: polkit-kde-agent-5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== postfix ==== Version update (3.3.3 -> 3.4.5) Subpackages: postfix-doc - Update to 3.4.5: Bugfix (introduced: Postfix 3.0): LMTP connections over UNIX-domain sockets were cached but not reused, due to a cache lookup key mismatch. Therefore, idle cached connections could exhaust LMTP server resources, resulting in two-second pauses between email deliveries. This problem was investigated by Juliana Rodrigueiro. File: smtp/smtp_connect.c. - Update to 3.4.4 o Incompatible changes - The Postfix SMTP server announces CHUNKING (BDAT command) by default. In the unlikely case that this breaks some important remote SMTP client, disable the feature as follows: /etc/postfix/main.cf: [#] The logging alternative: smtpd_discard_ehlo_keywords = chunking [#] The non-logging alternative: smtpd_discard_ehlo_keywords = chunking, silent_discard - This introduces a new master.cf service 'postlog' with type 'unix-dgram' that is used by the new postlogd(8) daemon. Before backing out to an older Postfix version, edit the master.cf file and remove the postlog entry. - Postfix 3.4 drops support for OpenSSL 1.0.1 - To avoid performance loss under load, the tlsproxy(8) daemon now requires a zero process limit in master.cf (this setting is provided with the default master.cf file). By default, a tlsproxy(8) process will retire after several hours. - To set the tlsproxy process limit to zero: postconf -F tlsproxy/unix/process_limit=0 postfix reload o Major changes - Postfix SMTP server support for RFC 3030 CHUNKING (the BDAT command) without BINARYMIME, in both smtpd(8) and postscreen(8). This has no effect on Milters, smtpd_mumble_restrictions, and smtpd_proxy_filter. See BDAT_README for more. - Support for logging to file or stdout, instead of using syslog. - Logging to file solves a usability problem for MacOS, and eliminates multiple problems with systemd-based systems. - Logging to stdout is useful when Postfix runs in a container, as it eliminates a syslogd dependency. - Better handling of undocumented(!) Linux behavior whether or not signals are delivered to a PID=1 process. - Support for (key, list of filenames) in map source text. Currently, this feature is used only by tls_server_sni_maps. - Automatic retirement: dnsblog(8) and tlsproxy(8) process will now voluntarily retire after after max_idle*max_use, or some sane limit if either limit is disabled. Without this, a process could stay busy for days or more. - Postfix SMTP client support for multiple deliveries per TLS-encrypted connection. This is primarily to improve mail delivery performance for destinations that throttle clients when they don't combine deliveries. This feature is enabled with "smtp_tls_connection_reuse=yes" in main.cf, or with "tls_connection_reuse=yes" in smtp_tls_policy_maps. It supports all Postfix TLS security levels including dane and dane-only. - SNI support in the Postfix SMTP server, the Postfix SMTP client, and in the tlsproxy(8) daemon (both server and client roles). See the postconf(5) documentation for the new tls_server_sni_maps and smtp_tls_servername parameters. - Support for files that contain multiple (key, certificate, trust chain) instances. This was required to implement server-side SNI table lookups, but it also eliminates the need for separate cert/key files for RSA, DSA, Elliptic Curve, and so on. - Support for smtpd_reject_footer_maps (as well as the postscreen variant postscreen_reject_footer_maps) for more informative reject messages. This is indexed with the Postfix SMTP server response text, and overrides the footer specified with smtpd_reject_footer. One will want to use a pcre: or regexp: map with this. o Bugfixes - Andreas Schulze discovered that reject_multi_recipient_bounce was producing false rejects with BDAT commands. This problem already existed with Postfix 2.2 smtpd_end_of_data_restrictons. Postfix 3.4.4 fixes both. ==== powerdevil5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: powerdevil5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - No code changes since 5.15.3 ==== python-Pygments ==== - Refresh denose.patch to make whole test suite to pass. bt#birkenfeld/pygments-main#1490 ==== python-argcomplete ==== Version update (1.9.4 -> 1.9.5) - Update to 1.9.5: * check_module: Don?t crash, exit with error instead (#261) * Register completion for multiple commands (#246) ==== python-numpy ==== Subpackages: python2-numpy python3-numpy - Fix python sitearch paths for SLE_12_SP3/4 ==== python-pydot ==== Version update (1.2.4 -> 1.4.1) - Skip one failing test: * pydot-skip-test.patch - Enable testsuite and add tests dependencies - Update to 1.4.1: * Make graph, edge, node attributes order deterministic * Fix string formatting after catching error (#201) * Installation of pydot in conda env on Windows directly supported * Fixed comparing of SHA hash in regression tests (which fail now) * Dropped Python 2.6 support (#185) * Move errno from os to builtin. Fixes #177 (#191, #182) ==== python-rpm-macros ==== Version update (20190315.d3034bf -> 20190402.c88be49) - Update to version 20190402.c88be49: * Add missing $ expansion on the pytest call ==== quadrapassel ==== Version update (3.22.0 -> 3.32.0) Subpackages: quadrapassel-lang - Update to version 3.32.0: + Updated translations. - Update to version 3.31.90: + Use --no-net for the AppStream validation test. + Miscellaneous cleanup. + Updated translations. - Add new check section to spec and run meson_test macro. - Update to version 3.31.4: + Fix and restore preview in difficult mode. Note that the preview lies to you in this mode. + Fix apparent freeze in difficult mode. + Convert from autotools to meson. + Consistently use org.gnome.Quadrapassel app id. + Miscellaneous fixes. + Updated translations. - Switch to meson buildsystem, add meson BuildRequires and macros. - Drop hicolor-icon-theme BuildRequires: No longer needed. - Update to version 3.31.3: + Add game controller support using libmanette. + Update menus for GNOME 3.32 recommendations. + Pressing Pause will start a new game if no game has started yet. + Stop using intltool. + Miscellaneous fixes. - Drop intltool >= 0.50 BuildRequires: No longer needed. - Drop post(un) handling of glib2_gsettings_schema_post(un), desktop_database_post(un) and icon_theme_cache_post(un) and drop glib2_gsettings_schema_requires, no longer needed. - Drop update-desktop-files BuildRequires and suse_update_desktop_file macro, no longer needed. - Add fdupes BuildRequires and macro, remove duplicate files. - Add pkgconfig(manette-0.2) BuildRequires: New dependency. ==== rubygem-rack ==== Version update (2.0.6 -> 2.0.7) - updated to version 2.0.7 no changelog found ==== schily ==== Subpackages: cdda2wav cdrecord libcdrdeflt1_0 libdeflt1_0 libedc_ecc1_0 libedc_ecc_dec1_0 libfile1_0 libfind3_0 libparanoia1_0 librmt1_0 librscg1_0 libscg1_0 libscgcmd1_0 libschily2_0 mkisofs readcd spax star - Update to new upstream release 2019.03.29 * Bourne Shell: "readonly", "export" and "local" now expand the tilde. * star: several forgotten fields of the tar header now support base-256 encoding. * star: support for new BSD and Linux file flags has been added. * star: The old star format no longer causes a warning when plain files from *BSD are imported on a UNIX with contiguous minor device bits. * star: Support for the "lzma" and "freeze2" compression has been added. ==== suitesparse ==== Subpackages: libamd2 libcamd2 libccolamd2 libcholmod3 libcolamd2 libsuitesparseconfig5 libumfpack5 - Trim future visions from descriptions. - Update to SuiteSparse 5.4.0 * GraphBLAS 2.2.2: many upgrades and new features, a few bug fixes - Update to SuiteSparse 5.3.0 * new package: Mongoose (version 2.0.2) - doc packages for AMD, CAMD, KLU, LDL, and Mongoose. ==== systemsettings5 ==== Version update (5.15.3 -> 5.15.4) Subpackages: systemsettings5-lang - Update to 5.15.4 * New bugfix release * For more details please see: * https://www.kde.org/announcements/plasma-5.15.4.php - Changes since 5.15.3: * Fix monochrome icons in tooltips (kde#F6698413) ==== taglib-extras ==== - Drop unused libkde4-devel BuildRequires, the KDE4 integration has been removed upstream in 1.0 - BuildRequire cmake and gcc-c++ instead that are needed for building and were implicitly pulled in by libkde4-devel - Remove unrecognized cmake options - Use %cmake macro instead of calling cmake directly - Run spec-cleaner ==== telegram-purple ==== Version update (1.3.1 -> 1.4.1) Subpackages: libpurple-plugin-telegram libpurple-plugin-telegram-lang pidgin-plugin-telegram - Upgrade to 1.4.1: - Had to skip 1.4.0 as someone distributed an intermediate version as "1.4.0" - Import awesomeness from kenorb's mega-merge: - Support for pinned and other action types - Stability improvements in general - Better build support: - No -Werror + Drop telegram-purple-1.3.1-disable-werror.patch - Compatibility with LibreSSL - Compatibility with C++ - Simplify: Only one level of submodules - Add support for replies/forwarded messages - Add support for IPv6-only - Add windows cross-compilation script ==== update-alternatives ==== - Remove useless uses of rpm.expand - Fix use of file:close ==== virt-manager ==== Subpackages: virt-install virt-manager-common - Upstream bug fixes (bsc#1027942) 57db4185-virt-clone-fix-force-copy-of-empty-cdrom-or-floppy-disk.patch 26a433fc-virtManager-clone-check-which-storage-pools-supports-volume-cloning.patch 4f66c423-cloner-Handle-nonsparse-for-qcow2-images.patch a02fc0d0-virtManager-clone-build-default-clone-path-if-we-know-how.patch 1856c1fa-support-Fix-minimum-version-check.patch 74bbc3db-urldetect-Check-also-for-treeinfo.patch 708af01c-osdict-Add-supports_virtioinput.patch f23b01be-guest-Add-VirtIO-input-devices-to-s390x-guests-with-graphics.patch 7afbb90b-virt-xml-Handle-VM-names-that-look-like-id-uuid.patch a0ca387a-cli-Fix-pool-default-when-path-belongs-to-another-pool.patch ==== virtualbox ==== Version update (6.0.4_k5.0.3_1 -> 6.0.4_k5.0.6_1) Subpackages: virtualbox-guest-kmp-default virtualbox-guest-tools virtualbox-guest-x11 - Fix problems with use of files "virtualbox.permissions" and "virtualbox.permissions.paranoid" - they are deleted Removed setBadness line from virtualbox-rpmlinc. - Fix file "fixes_for_qt5.13.patch" - macro QT_VERSION_CHECK is not available for Qt < 5.13. Substitute the equivalent (qtmajor << 16 + qtminor << 8). - adjust patch virtualbox-fix-ui-background-color.patch to really fix the background color messing... - add patch to stop UI messing with Highlight Color for background - apply fixes_for_qt5.13.patch for Qt versions >= 5.13.0 only - Fix build with the pending Qt 5.13. File "fixes_for_qt5.13.patch" is added. bsc#1130503 ==== wget ==== Version update (1.20.1 -> 1.20.2) - GNU wget 1.20.2: * NTLM authentication will retry under certain cases * Fixed a buffer overflow vulnerability ==== wicked ==== Version update (0.6.53 -> 0.6.54) Subpackages: libwicked-0-6 wicked-service - version 0.6.54 - switch to use systemd notify and prevent event backlog at start by calling udevadm settle before starting wickedd (bsc#1118206) - dhcp6: don't discard confirm reply without status (bsc#1127340) - ethtool: set lro legacy flag and not txvlan (bsc#1123555) - init memory before use in ioctl - fsm: fix find pending worker loop segfault (boo#1106809) ==== xen ==== Version update (4.12.0_07 -> 4.12.0_08) Subpackages: xen-libs xen-tools xen-tools-domU - Update to Xen 4.12.0 FCS release (fate#325107, fate#323901) xen-4.12.0-testing-src.tar.bz2 * HVM/PVH and PV only Hypervisor: The Xen 4.12 release separates the HVM/PVH and PV code paths in Xen and provides KCONFIG options to build a PV only or HVM/PVH only hypervisor. * QEMU Deprivilege (DM_RESTRICT): In Xen 4.12, this feature has been vastly improved. * Argo - Hypervisor-Mediated data eXchange: Argo is a new inter- domain communication mechanism. * Improvements to Virtual Machine Introspection: The VMI subsystem which allows detection of 0-day vulnerabilities has seen many functional and performance improvements. * Credit 2 Scheduler: The Credit2 scheduler is now the Xen Project default scheduler. * PVH Support: Grub2 boot support has been added to Xen and Grub2. * PVH Dom0: PVH Dom0 support has now been upgraded from experimental to tech preview. * The Xen 4.12 upgrade also includes improved IOMMU mapping code, which is designed to significantly improve the startup times of AMD EPYC based systems. * The upgrade also features Automatic Dom0 Sizing which allows the setting of Dom0 memory size as a percentage of host memory (e.g. 10%) or with an offset (e.g. 1G+10%). ==== yast2-add-on ==== Version update (4.1.10 -> 4.1.11) - Removing add-on repo: Deselecting product in solver too. (bsc#1077399) - 4.1.11 ==== yast2-bootloader ==== Version update (4.1.23 -> 4.1.24) - Propagate serial console params to XEN kernels (bsc#1080928) - 4.1.24 ==== yast2-installation ==== Version update (4.2.0 -> 4.2.2) - Removed BuildRequires: yast2-ntp-client (causing dependency cycle) (related to the previous fix bsc#1129095) - 4.2.2 - Add a new installation dialog which allows to setup the NTP servers (bsc#1129095). - 4.2.1 ==== yast2-network ==== Version update (4.1.44 -> 4.2.0) - publish find dhcp interfaces to component system, so yapi can be dropped from yast2-samba-client (fate#323734) - 4.2.0 - bnc#1129012 - AY: Use the bus_id of the udev parent device when using virtio netcards and matching the existent rules with the defined in in the profile. - 4.1.45 - Showing correct start mode for nfsroot device (bsc#1105692). ==== yast2-packager ==== Version update (4.2.1 -> 4.2.2) - Package proposal: Reset solver state before starting the next solver run (related to bsc#1077399). - 4.2.2 ==== yast2-samba-client ==== Version update (4.1.1 -> 4.2.0) - Replace YaPI calls (fate#323734) - 4.2.0 ==== yast2-storage-ng ==== Version update (4.2.0 -> 4.2.3) - Fix NFS root detection when installing with AutoYaST (needed for bsc#1130256). - 4.2.3 - Fix initial proposal to make a clean copy of initial settings before switching to another candidate device (bsc#1130392). - Related to bsc#1102026 and bsc#1090383. - 4.2.2 ==== yast2-trans ==== Version update (84.87.20190330.92a2062d5c -> 84.87.20190406.98502195be) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en yast2-trans-en_GB yast2-trans-en_US yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20190406.98502195be: * New POT for text domain 'update'. * New POT for text domain 'samba-client'. * New POT for text domain 's390'. * New POT for text domain 'network'. * New POT for text domain 'control'. * Fix storage path displays in Arabic text, part 2 * Fix storage path displays in Arabic text * Fix alignment in Partitioner/Add NFS Client/Error pop-up (bsc#1128141) * New POT for text domain 'authserver'. * Translated using Weblate (Chinese (China)) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Catalan) - Update to version 84.87.20190404.a060a423f4: * New POT for text domain 'add-on'. * New POT for text domain 'autoinst'. * New POT for text domain 'control'. * New POT for text domain 'gtk'. * New POT for text domain 'installation'. * New POT for text domain 'packager'. * New POT for text domain 'registration'. * Translated using Weblate (Albanian) * Translated using Weblate (Arabic) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Czech) * Translated using Weblate (Dutch) * Translated using Weblate (French) * Translated using Weblate (German) * Translated using Weblate (Hungarian) * Translated using Weblate (Italian) * Translated using Weblate (Japanese) * Translated using Weblate (Korean) * Translated using Weblate (Polish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) * Translated using Weblate (Swedish) ==== zchunk ==== Version update (1.0.3 -> 1.1.0) - Update to version 1.1.0 + Fix multipart boundary bug when dealing with lighttpd servers + Optimize chunk matching while downloading, significantly reducing CPU usage -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Leap 15.1 Build 447.1 released!
by Ludwig Nussel 10 Apr '19

10 Apr '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.1&bui… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Distribution&q… When you reply to discuss some issues, make sure to change the subject. Please use the test plan at https://docs.google.com/spreadsheets/d/1AGKijKpKiJCB616-bHVoNQuhWHpQLHPWCb3… to record your testing efforts and use bugzilla to report bugs. Packages changed: libstorage-ng (4.1.103 -> 4.1.105) parole (1.0.0 -> 1.0.2) ristretto (0.8.2 -> 0.8.4) yast2-add-on (4.1.10 -> 4.1.11) yast2-packager (4.1.35 -> 4.1.36) === Details === ==== libstorage-ng ==== Version update (4.1.103 -> 4.1.105) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - Translated using Weblate (Portuguese (Brazil)) - 4.1.105 - Translated using Weblate (Swedish) - 4.1.104 - Translated using Weblate (Spanish) - Translated using Weblate (Slovak) - Translated using Weblate (Russian) - Translated using Weblate (Polish) - Translated using Weblate (Korean) - Translated using Weblate (Italian) - Translated using Weblate (Hungarian) - Translated using Weblate (German) - Translated using Weblate (Dutch) - Translated using Weblate (Czech) - Translated using Weblate (Catalan) - Translated using Weblate (Arabic) - Translated using Weblate (Arabic) ==== parole ==== Version update (1.0.0 -> 1.0.2) Subpackages: parole-lang - Spec file update: switch URL to new upstream docs - Spec File cleanup: - Switched to %autosetup %make_build to ease spec file maintanance - Dropped obsolete macros - Moved COPYING to %license - update to version 1.0.2 * Bug Fixes - Added support for GST_INSTALL_PLUGINS_HELPER_MISSING when attempting to install missing codecs (bxo#14529) - Fixed compiler error -Wcast-function-type (GCC 8) - Fixed disabling vendor-enabled plugins - Fixed crash when disabling plugins (lp#1698540) - Fixed play button sensitivity items are added to playlist (bxo#13724, lp#1705243) - Fixed Appstream validation by removing em tags (bxo#14260) - Fixed plugin active state when reopening the Plugins dialog - Resolved g_type_class_add_private warnings (bxo#15014) * Translation Updates - update to version 1.0.1 * Translations only ==== ristretto ==== Version update (0.8.2 -> 0.8.4) Subpackages: ristretto-lang - Spec file update: * switched source and docs URL to https * changed docs URL according to upstream - Update to version 0.8.4 * Add missing field initializers * Instead of thumbnails, the same icons with a crossed red circle (bxo#13419) * Resolve g_type_class_add_private() deprecation * Glib-Critical errors to stdout: Source ID X was not found when attempting to remove it (bxo#15268) * Fix memory leak (bxo#12034) * Show file size in the status bar (bxo#14791) * Fix opening of PPM files (bxo#14709) * Translation updates: - Spec file clean up: dropped obsolete macros - update to version 0.8.3 - Fix GLib-GObject-CRITICAL in directory monitoring code - Fix loading image from an URL - Fix freeing memory used for storing bg colors (bxo#13335) - Fix opening image files that are symlinks (bxo#13576) - Fix BMP files failing to load with libmagic (bxo#13489) - Port to GDBus - Translation updates ==== yast2-add-on ==== Version update (4.1.10 -> 4.1.11) - Removing add-on repo: Deselecting product in solver too. (bsc#1077399) - 4.1.11 ==== yast2-packager ==== Version update (4.1.35 -> 4.1.36) - Package proposal: Reset solver state before starting the next solver run (related to bsc#1077399). - 4.1.36 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] adding new repositories to projects
by Simon Crute 09 Apr '19

09 Apr '19

Hi All, I'm new to the list, and still trying to get to grips with how things are done here.. How does one make requests against project owners for new repositories to be enabled against projects ? Specifically, I'm after openvas from security:OpenVAS:STABEL:v8 to be work against SLE_12_sp4, Now, I *think* the reason it's not building is that everything in there has build-requires of libopenvas-devel, and I think libopenvas-devel requires hiredis which is a straight "aggregate" from server:database, which doesn't have anything enabled against SLE_12_SP4. I did a quick branch/test of hiredis building against SLE_12_sp4, and it seemed to do so fine in my branch. So, what is the "correct" way to request that SLE_12_sp4 is enabled for all the packages in server:database. Is it simply an email to all the maintainers, an email here, or something else ? Thanks. -- Simon Crute Micro Focus International

2 1

[opensuse-factory] Leap 15.1 Build 444.1 released!
by Ludwig Nussel 09 Apr '19

09 Apr '19

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.1&bui… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Distribution&q… When you reply to discuss some issues, make sure to change the subject. Please use the test plan at https://docs.google.com/spreadsheets/d/1AGKijKpKiJCB616-bHVoNQuhWHpQLHPWCb3… to record your testing efforts and use bugzilla to report bugs. Packages changed: MozillaThunderbird (60.5.1 -> 60.6.1) akonadi-server bluez btrfsprogs cifs-utils createrepo_c (0.10.0.git20170131.04828e6 -> 0.12.1) flatpak glibc glibc gnuhealth-client ldb (1.4.3 -> 1.4.6) libarchive libgnomesu (2.0.2 -> 2.0.3) libqt5-qtbase libtirpc mdadm netpbm openssh ovmf patterns-base perl-IO-Socket-SSL plymouth (0.9.4+git20181111.118c5ca -> 0.9.4+git20190304.ed9f201) python2-GooCalendar qemu re2 (20180901 -> 20190301) snapper (0.8.2 -> 0.8.3) suse-module-tools (15.1.11 -> 15.1.13) virt-manager xen (4.12.0_04 -> 4.12.0_08) yast2-theme (4.1.8 -> 4.1.11) yast2-trans (84.87.20190322.b16b39e213 -> 84.87.20190330.92a2062d5c) === Details === ==== MozillaThunderbird ==== Version update (60.5.1 -> 60.6.1) Subpackages: MozillaThunderbird-translations-common MozillaThunderbird-translations-other - Mozilla Thunderbird 60.6.1 MFSA 2019-12 (bsc#1130262) * CVE-2019-9810 (bmo#1537924) IonMonkey MArraySlice has incorrect alias information * CVE-2019-9813 (bmo#1538006) Ionmonkey type confusion with __proto__ mutations - Mozilla Thunderbird 60.6.0 * Calendar: Can't create repeating event with end date when using certain time zones, for example Europe/Minsk * some minor bugfixes * using 60.6.0esr Mozilla platform (bsc#1129821) - Mozilla Thunderbird 60.5.3 * fixed a regression on the Windows platform: Problem when using "Send to > Mail recipient" on Windows - Mozilla Thunderbird 60.5.2 * UTF-8 support for MAPISendMail * Problem with S/MIME certificate verification when receiving email from Outlook (issue introduced in version 60.5.1) ==== akonadi-server ==== Subpackages: akonadi-server-lang akonadi-server-sqlite libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiPrivate5 libKF5AkonadiWidgets5 libKF5AkonadiXml5 - Add upstream patches to fix regressions when checking mail: * fix-regression-when-updating-attributes.patch * fix-collection-detaching.patch ==== bluez ==== Subpackages: libbluetooth3 - Add:btmon: multiple memory management vulnerabilities fixed Multiple different memory management vulnerabilities were discovered in btmon while fuzzing it with American Fuzzy Lop. Purpose of this fuzzing effort was to find some bugs in btmon, analyse and fix them but also try to exploit them. Also goal was to prove that fuzzing is low effort way to find bugs that could end up being severe ones. Most common weakness appeared to be buffer over-read which was usually caused by missing boundary checks before accessing array. Integer underflows were also quite common. Most interesting bug was simple buffer overflow that was actually discovered already couple years ago by op7ic: https://www.spinics.net/lists/linux-bluetooth/msg68898.html but it was still not fixed. This particular vulnerability ended up being quite easily exploitable if certain mitigation technics were disabled.(bsc#1015173)(CVE-2016-9918) 0001-btmon-fix-segfault-caused-by-buffer-over-read.patch 0002-btmon-fix-segfault-caused-by-buffer-over-read.patch 0003-btmon-fix-segfault-caused-by-buffer-over-read.patch 0004-btmon-Fix-crash-caused-by-integer-underflow.patch 0005-btmon-fix-stack-buffer-overflow.patch 0006-btmon-fix-multiple-segfaults.patch 0007-btmon-fix-segfault-caused-by-integer-underflow.patch 0008-btmon-fix-segfault-caused-by-integer-undeflow.patch 0009-btmon-fix-segfault-caused-by-buffer-over-read.patch 0010-btmon-fix-segfault-caused-by-buffer-overflow.patch 0011-btmon-fix-segfault-caused-by-integer-underflow.patch 0012-btmon-fix-segfault-caused-by-buffer-over-read.patch ==== btrfsprogs ==== Subpackages: btrfsprogs-udev-rules libbtrfs0 - Use correct path for dracut-fsck-help.txt in module-setup.sh (bsc#1122539) * Remove module-setup.sh * Add module-setup.sh.in ==== cifs-utils ==== - Fix dependency failure on SLE15 regarding python2/python3. ==== createrepo_c ==== Version update (0.10.0.git20170131.04828e6 -> 0.12.1) Subpackages: libcreaterepo_c0 python3-createrepo_c - Added upstream patches * 0001-Find-correct-nosetests-version-even-when-which-comma.patch * 0002-fix-linking-when-Wl-no-undefined-is-set.patch - Disable drpm support - Update to version 0.12.1: * Release 0.12.1 * For make test, xz and zchunk (not just *-devel) are required. * Make cmake variable PYTHON_EXECUTABLE global * Add zchunk support already to Fedora 29 * [spec] Fix spec to work for epel 7 * Add CMake support for python interpreter path * Add space after if statement * Fix misc test * Add missing sentinal * Add zchunk support to mergerepo_c for extra files - Backport fixes from upstream * 0001-zck_end_chunk-returns-number-of-bytes-written-or-1-f.patch * 0002-Add-missing-sentinal.patch * 0003-Fix-misc-test.patch - Update to 0.12.0 + Add basic support for zchunk metadata + Add support for building wheels to upload to PyPI - Drop Python 2 subpackage - Enable drpm support - Enable zchunk for openSUSE Leap 15.1+ and Tumbleweed - Adjust changes entries to use full author identities - Update to 0.11.1 + Add support for RPMs with large files + Identify Requires(missingok) as Recommends correctly + Enable legacy tags by default + Fix missing packages in mergerepo_c with multiple VR of same name + Add mergerepo_c --repo-prefix-search and --repo-prefix-replace + Build against Python 3 by default for bindings - Drop snapshot source service and snapshot tarball - Use license macro for license file - Drop trailing whitespace - Fix comment about drpm support - [boo#1125044] fix for huge rpm packages ==== flatpak ==== Subpackages: libflatpak0 typelib-1_0-Flatpak-1_0 - Add upstream patch to fix a sandbox bypass using the TIOCSTI ioctl (boo#1130637, CVE-2019-10063, gh#flatpak/flatpak#2782) * 0001-Only-compare-the-lowest-32-ioctl-arg-bits-for-TIOCSTI.patch ==== glibc ==== - pthread-mutex-trylock-barrier.patch: pthread_mutex_trylock does not use the correct order of instructions while maintaining the robust mutex list due to missing compiler barriers (bsc#1130045, BZ #24180) - getaddrinfo-parse-ipv4-address.patch: getaddrinfo: Fully parse IPv4 address strings (CVE-2016-10739, bsc#1129783, BZ #20018) ==== glibc ==== Subpackages: glibc-extra glibc-locale glibc-locale-base nscd - pthread-mutex-trylock-barrier.patch: pthread_mutex_trylock does not use the correct order of instructions while maintaining the robust mutex list due to missing compiler barriers (bsc#1130045, BZ #24180) - getaddrinfo-parse-ipv4-address.patch: getaddrinfo: Fully parse IPv4 address strings (CVE-2016-10739, bsc#1129783, BZ #20018) ==== gnuhealth-client ==== - link to python2-GooCalendar (remains python2) boo#1131096 ==== ldb ==== Version update (1.4.3 -> 1.4.6) Subpackages: libldb1 libldb1-32bit python3-ldb - Update to 1.4.6 + CVE-2019-3824 out of bounds read in wildcard compare; (bso#13773); ==== libarchive ==== Subpackages: bsdtar libarchive13 - Added patches: * CVE-2019-1000019.patch Fixes 7zip crash (boo#1124341) * CVE-2019-1000020.patch ISO9660 infinite loop fixed (boo#1124342) - Added patches: * CVE-2018-1000877.patch, which fixes a double free vulnerability in RAR decoder (CVE-2018-1000877 bsc#1120653) * CVE-2018-1000878.patch, which fixes a Use-After-Free vulnerability in RAR decoder (CVE-2018-1000878 bsc#1120654) * CVE-2018-1000879.patch, which fixes a NULL Pointer Dereference vulnerability in ACL parser (CVE-2018-1000879 bsc#1120656) * CVE-2018-1000880.patch, which fixes an improper input validation vulnerability in WARC parser (CVE-2018-1000880 bsc#1120659) ==== libgnomesu ==== Version update (2.0.2 -> 2.0.3) Subpackages: libgnomesu-lang libgnomesu0 - Update to version 2.0.3: * Make gnomesu honor /etc/default/su settings for PATH (boo#1131339). * Updated translations. - Sync PAM configuration with su. - Modernize spec-file by calling spec-cleaner ==== libqt5-qtbase ==== Subpackages: libQt5Concurrent5 libQt5Core5 libQt5DBus5 libQt5Gui5 libQt5Network5 libQt5OpenGL5 libQt5PrintSupport5 libQt5Sql5 libQt5Sql5-mysql libQt5Sql5-sqlite libQt5Test5 libQt5Widgets5 libQt5Xml5 libqt5-qtbase-platformtheme-gtk3 - Add qt.qpa.xcb and qt.qpa.events logging categories so xcb warnings can be disabled (boo#1115541, QTBUG-55167) * add-logging-category-for-xcb-warnings.patch - Use %license ==== libtirpc ==== Subpackages: libtirpc-netconfig libtirpc3 libtirpc3-32bit - Fix SLES 15 - yp_bind_client_create_v3: RPC: Unknown host (bsc#1126096). - Add upstream patch 0001-xdrstdio_create-buffers-do-not-output-encoded-values.patch - update patch 0001-rpcb_clnt.c-config-to-try-protocolversion-2-first.patch to avoid a file descriptor leak - add option to enforce connection via protocol version 2 first (bsc#1120689) - add 0001-rpcb_clnt.c-config-to-try-protocolversion-2-first.patch ==== mdadm ==== - imsm: finish recovery when drive with rebuild fails (bsc#1126975) 0010-imsm-finish-recovery-when-drive-with-rebuild-fails.patch - mdmon: don't attempt to manage new arrays when terminating (bsc#1127526) 0011-mdmon-don-t-attempt-to-manage-new-arrays-when-termin.patch ==== netpbm ==== Subpackages: libnetpbm11 - security update * CVE-2018-8975 [bsc#1086777] + netpbm-CVE-2018-8975.patch ==== openssh ==== Subpackages: openssh-helpers - Fix a double free() in the KDF CAVS testing tool (bsc#1065237) * modify openssh-7.7p1-cavstest-kdf.patch - Minor clean-up of the fips patches, modified openssh-7.7p1-fips.patch openssh-7.7p1-fips_checks.patch ==== ovmf ==== Subpackages: qemu-ovmf-x86_64 - Add ovmf-bsc1130267-overflow-in-partition-and-udf.patch to fix buffer overflows in PartitionDxe and UdfDxe (bsc#1130267, CVE-2019-0160) - Add ovmf-bsc1128503-fix-stack-overflow-in-HiiImage-and-HiiDatabase.patch to fix stack overflow in HiiImange and HiiDatabase (bsc#1128503, CVE-2018-12181) ==== patterns-base ==== Subpackages: patterns-base-32bit patterns-base-apparmor patterns-base-apparmor-32bit patterns-base-apparmor_opt patterns-base-base patterns-base-base-32bit patterns-base-basesystem patterns-base-console patterns-base-enhanced_base patterns-base-enhanced_base-32bit patterns-base-enhanced_base_opt patterns-base-minimal_base patterns-base-minimal_base-32bit patterns-base-sw_management patterns-base-sw_management-32bit patterns-base-transactional_base patterns-base-update_test patterns-base-x11 patterns-base-x11-32bit patterns-base-x11_enhanced patterns-base-x11_enhanced-32bit patterns-base-x11_opt - Remove btrfsmaintenance from patterns-base (boo#1063638) - Fix x11_raspberrypi (jsc#SLE-4142): * Use only Requires, on JeOS recommmends and suggests are no-ops * Remove xf86-input-void, obsolete (and not in SLE) * Require base and x11 patterns * Add some YaST modules, otherwise the control center is empty ==== perl-IO-Socket-SSL ==== - Update expired certificates in the build tests [bsc#1131103, bsc#1131103] * Added perl-IO-Socket-SSL-update-certificates.patch ==== plymouth ==== Version update (0.9.4+git20181111.118c5ca -> 0.9.4+git20190304.ed9f201) Subpackages: libply-boot-client4 libply-splash-core4 libply-splash-graphics4 libply4 plymouth-dracut plymouth-plugin-label plymouth-plugin-label-ft plymouth-plugin-script plymouth-plugin-two-step plymouth-scripts - Fix theme-bgrt dependencies (based on plugin-two-step with images from theme-spinner) - Update to version 0.9.4+git20181219.c8f1256: * ply-pixel-buffer: Fix right and bottom edge rendering of scaled buffers. * Add support for translating the user visible strings in some themes * Prefix Title and Subtitle theme config keywords with an underscore * Add new reboot and system-upgrade modes * main: Remove private ply_mode_t * two-step: Make ProgressBarShowPercentComplete a per mode setting * plymouthd.defaults: Change default ShowDelay to 0 * ply-boot-splash: Do not add ply_boot_splash_update_progress timeout multiple times * logging: Minor log-message fixes. Improve logging format. * themes: Update spinner and bgrt theme offline updates mode * two-step: Add a per mode setting to suppress messages. Add progress-bar support. Add MessageBelowAnimation option. Add per mode settings. Drop background_is_bgrt view_t member * ply-progress-bar: Allow caller to specify the widgets width and height. Allow choosing fore- and back-ground color. Redraw on percentage update. * boot-server: fix type confusion when allocating connection object * ply-device-manager: Handle change events for monitor hotplugging. Consume all events in one go. * drm: Stop limiting preferred-mode picking to UEFI systems. Reset mode on display-port connected outputs with a bad link-status. Implement handle_change_event. Ensure heads are mapped before flushing them. Allow calling create_heads_for_active_connectors multiple times. Allow calling ply_renderer_head_add_connector with existing connector_id. Limit backend->resources lifetime to within query_device. Store and keep all the outputs in the backend. Add get_output_info helper function Stop storing a pointer to drmModeConnector in ply_output_t Stop keeing a drmModeConnector instance around. Refactor ply_renderer_head_add_connector and ply_renderer_head_new - Rebase 0002-Install-label-ft-plugin-into-initrd-if-available.patch - Update to version 0.9.4+git20181219.c8f1256: * two-step: Use plymouth_strtod Use the locale agnostic plymouth_strtod helper which always uses a "." as decimal seperator. This fixes the various Alignment options not working with some locales. - Update to version 0.9.4+git20181209.f7d5bb1: * ply-keyboard: Fix compiler warning * When a renderer goes away on a udev remove event, free keyboards associated with the renderer, before freeing the renderer. * device-manager: free keyboards when deactivating a renderer * keyboard: add helper to get the keyboard's renderer, if applicable. - Update to version 0.9.4+git20181204.0cd0613: * drm: Pick a controller for unconfigured connectors * drm: Drop crtcs for clones for which we've picked different modes * drm: More connector enumeration refactoring * drm: Store tiled and rotation in ply_output_t * drm: Refactor create_heads_for_active_connectors * drm: Directly store the mode instead of the mode_index * drm: Drop unused encoder_id - Update to version 0.9.4+git20181129.a7ec3e6: * Add new BGRT theme, using the firmware boot splash as background * two-step: bgrt: Deal with quirky firmwares, Add ACPI BGRT extension support, Speed up background-tile drawing on HiDPI screens, Use a pixel-buffer instead of an image for the view's background * ply-pixel-buffer: Add ply_pixel_buffer_rotate_upright helper, Add ply_pixel_buffer_get/set_device_rotation helpers, Fix marking buffers as opaque when doing a solid fill, Fix fill_with_buffer fastpath when device_scale != 1. - Update to version 0.9.4+git20181122.aaa140b: Add a separator between different boot logs Fix race causing undesired creation of non-gfx devs Fix animation not starting on later added heads ==== python2-GooCalendar ==== - create package python2-GooCanvas (see boo #1131096) ==== qemu ==== Subpackages: qemu-block-curl qemu-block-rbd qemu-block-ssh qemu-guest-agent qemu-ipxe qemu-ksm qemu-seabios qemu-sgabios qemu-tools qemu-ui-curses qemu-ui-gtk qemu-ui-sdl qemu-vgabios qemu-x86 - Adjust fix for CVE-2019-8934 (bsc#1126455) to match the latest upstream adjustments for the same. Basically now the security fix is to provide a dummy host-model and host-serial value, which overrides getting that value from the host 0065-spapr-Simplify-handling-of-host-ser.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Tweak last spec file change to guard new Requires with conditional - Fix DOS possibility in device tree processing (CVE-2018-20815 bsc#1130675) 0064-device_tree.c-Don-t-use-load_image.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Remove an unneeded BuildRequires which impacts bsc#1119414 fix Also add a corresponding Recommends for qemu-tools as part of this packaging adjustment (bsc#1130484) - Fix information leak in slirp (CVE-2019-9824 bsc#1129622) 0061-slirp-check-sscanf-result-when-emul.patch - Add method to specify whether or not to expose certain ppc64 host information, which can be considered a security issue (CVE-2019-8934 bsc#1126455) 0062-ppc-add-host-serial-and-host-model-.patch - Fix OOB memory access and information leak in virtual monitor interface (CVE-2019-03812 bsc#1125721) 0063-i2c-ddc-fix-oob-read.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Again address ipxe GCC 9 incompatibilities. Previously included patch to disable unneeded warning got muffed somehow (bsc#1121464) ==== re2 ==== Version update (20180901 -> 20190301) - Update to 2019-03-01: * developer visible changes only - update to 2019-01-01: * developer visible changes, performance tweaks and bug fixes - update to 2018-10-01: * developer visible changes only ==== snapper ==== Version update (0.8.2 -> 0.8.3) Subpackages: libsnapper4 snapper-zypp-plugin - fixed seg.fault during rollback if the previous default subvolume is missing in the snapshot list (bsc#1130273) - version 0.8.3 ==== suse-module-tools ==== Version update (15.1.11 -> 15.1.13) - Update to version 15.1.13: * spec file: add conflicts for dracut < 44.2 (bsc#1127891) - Update to version 15.1.12 (git 1ab0b84): * modprobe.conf.common: add csiostor->cxgb4 dependency (bsc#1100989) * Load fbcon together with virtio_gpu on s390 (bsc#1121996, fate#327159) ==== virt-manager ==== Subpackages: virt-install virt-manager-common - Upstream bug fixes (bsc#1027942) 57db4185-virt-clone-fix-force-copy-of-empty-cdrom-or-floppy-disk.patch 26a433fc-virtManager-clone-check-which-storage-pools-supports-volume-cloning.patch 4f66c423-cloner-Handle-nonsparse-for-qcow2-images.patch a02fc0d0-virtManager-clone-build-default-clone-path-if-we-know-how.patch 1856c1fa-support-Fix-minimum-version-check.patch 74bbc3db-urldetect-Check-also-for-treeinfo.patch 708af01c-osdict-Add-supports_virtioinput.patch f23b01be-guest-Add-VirtIO-input-devices-to-s390x-guests-with-graphics.patch 7afbb90b-virt-xml-Handle-VM-names-that-look-like-id-uuid.patch a0ca387a-cli-Fix-pool-default-when-path-belongs-to-another-pool.patch - bsc#1126325 - L3: No way to set max_grant_frames for domUs via libvirt 8d9743d6-virt-install-Add-support-for-xenbus-controller.patch - bsc#1129176 - SLES 12 SP4 - kvm virt-install using ttyS0 leads to user process fault and interrupts installation (virt-manager) 5bc847eb-virt-install-Do-not-warn-about-consoles-on-s390x.patch - bsc#1129309 - Missing .treeinfo file on the media for CaaSP virtinst-add-caasp-support.patch - Add detection for Caasp 4.0 virtinst-media-detection.patch ==== xen ==== Version update (4.12.0_04 -> 4.12.0_08) - Update to Xen 4.12.0 FCS release (fate#325107, fate#323901) xen-4.12.0-testing-src.tar.bz2 * HVM/PVH and PV only Hypervisor: The Xen 4.12 release separates the HVM/PVH and PV code paths in Xen and provides KCONFIG options to build a PV only or HVM/PVH only hypervisor. * QEMU Deprivilege (DM_RESTRICT): In Xen 4.12, this feature has been vastly improved. * Argo - Hypervisor-Mediated data eXchange: Argo is a new inter- domain communication mechanism. * Improvements to Virtual Machine Introspection: The VMI subsystem which allows detection of 0-day vulnerabilities has seen many functional and performance improvements. * Credit 2 Scheduler: The Credit2 scheduler is now the Xen Project default scheduler. * PVH Support: Grub2 boot support has been added to Xen and Grub2. * PVH Dom0: PVH Dom0 support has now been upgraded from experimental to tech preview. * The Xen 4.12 upgrade also includes improved IOMMU mapping code, which is designed to significantly improve the startup times of AMD EPYC based systems. * The upgrade also features Automatic Dom0 Sizing which allows the setting of Dom0 memory size as a percentage of host memory (e.g. 10%) or with an offset (e.g. 1G+10%). - bsc#1130485 - Please drop Requires on multipath-tools in xen-tools. Now using Recommends multipath-tools. xen.spec - Update to Xen 4.12.0 RC7 release (fate#325107, fate#323901) xen-4.12.0-testing-src.tar.bz2 - Update to Xen 4.12.0 RC6 release (fate#325107, fate#323901) xen-4.12.0-testing-src.tar.bz2 - bsc#1026236 - add Xen cmdline option "suse_vtsc_tolerance" to avoid TSC emulation for HVM domUs if their expected frequency does not match exactly the frequency of the receiving host xen.bug1026236.suse_vtsc_tolerance.patch - Update to Xen 4.12.0 RC5 release (fate#325107, fate#323901) xen-4.12.0-testing-src.tar.bz2 - jsc#SLE-3059 - Disable Xen auto-ballooning - Add CONFIG_DOM0_MEM to the spec file for managing dom0 memory. xen.spec - Disable autoballooning in xl.con xl-conf-disable-autoballoon.patch - Update gcc9-ignore-warnings.patch to fix build in SLE12 - bsc#1126325 - fix crash in libxl in error path Setup of grant_tables and other variables may fail libxl.prepare-environment-for-domcreate_stream_done.patch ==== yast2-theme ==== Version update (4.1.8 -> 4.1.11) Subpackages: yast2-theme-oxygen - Require yast2-qt-branding-openSUSE for openSUSE distros so YaST firstboot has some branding (bsc#1105792) - 4.1.11 - Update oxygen icon theme (boo#1125450) - 4.1.10 - Add Breeze pattern icons (boo#971671) ==== yast2-trans ==== Version update (84.87.20190322.b16b39e213 -> 84.87.20190330.92a2062d5c) Subpackages: yast2-trans-ar yast2-trans-bg yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en yast2-trans-en_GB yast2-trans-en_US yast2-trans-eo yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-ko yast2-trans-lt yast2-trans-nb yast2-trans-nl yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ru yast2-trans-sk yast2-trans-sl yast2-trans-sv yast2-trans-uk yast2-trans-zh_CN yast2-trans-zh_TW - Update to version 84.87.20190330.92a2062d5c: * New POT for text domain 'firewall'. * New POT for text domain 'country'. * New POT for text domain 'iscsi-client'. * New POT for text domain 'installation'. * New POT for text domain 'update'. * New POT for text domain 'storage'. * New POT for text domain 'rmt'. * New POT for text domain 'packager'. * Translated using Weblate (Slovak) * Translated using Weblate (Danish) * Translated using Weblate (German) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Danish) * Translated using Weblate (Slovak) * New POT for text domain 'printer'. * Translated using Weblate (Slovak) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0