March 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] New Tumbleweed snapshot 20160321 released!
by Ludwig Nussel 23 Mar '16

23 Mar '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Packages changed: gnu_ddrescue (1.20 -> 1.21) mpfr (3.1.3 -> 3.1.4) ncurses nmap (7.01 -> 7.10) pkg-config (0.29 -> 0.29.1) sshfs (2.5 -> 2.7) === Details === ==== gnu_ddrescue ==== Version update (1.20 -> 1.21) - Update to 1.21 * A bug in the alignment of the I/O buffer has been (hopefully) fixed. * Ddrescue now exits with status 1 in case of unaligned read in direct mode (because of a wrong sector size, for example). * Short option names '-1' and '-2' have been removed to avoid mistakes in the command line. * Only regular files are now allowed as arguments of options '--log-rates' and '--log-reads'. * Option '-D, --odirect' now works also in fill mode. * Option '-J, --verify-on-error' now marks blocks as failed on any error, and exits with status 1 if a read error happens before a good sector is found. * Option '-X, --exit-on-error' has been extended to all phases. * The short name '-Z' has been assigned to option '--max-read-rate'. * The mapfile is now "fsync'ed" every 5 minutes because some systems seem to never write the mapfile to disc. * Ddrescue now shows all sizes in rescue mode; non-tried, non-trimmed, non-scraped, bad-sector and finished. * Ddrescue now shows the percentage of the domain rescued in rescue mode. ==== mpfr ==== Version update (3.1.3 -> 3.1.4) Subpackages: libmpfr4 mpfr-devel - mpfr 3.1.4, incorporating the cumulative patch, plus a number of upstream fixes - removing mpfr-3.1.3-patch1to12.patch ==== ncurses ==== Subpackages: libncurses5 libncurses6 libncurses6-32bit ncurses-devel ncurses-utils tack terminfo terminfo-base - Add ncurses patch 20160220 + modify test/configure script to check for pthread dependency of ncursest or ncursestw library when building ncurses examples, e.g., in case weak symbols are used. + modify configure macro for shared-library rules to use -Wl,-rpath rather than -rpath to work around a bug in scons (FreeBSD #178732, cf: 20061021). + double-width multibyte characters were not counted properly in winsnstr and wins_nwstr (report/example by Eric Pruitt). + update config.guess, config.sub from http://git.savannah.gnu.org/cgit/config.git ==== nmap ==== Version update (7.01 -> 7.10) - Nmap 7.10: * Add 12 NSE scripts * Integrate OS, service/version detection fingerprint submissions * Updated to various NSE scripts * Zenmap: Remember window geometry (position and size) from the previous time Zenmap was run. * Give option parsing errors after the long usage statement * Changed Nmap's idea of reserved and private IP addresses to include 169.254/16 (RFC3927) and remove 6/8, 7/8, and 55/8 networks (for -iR randomly generated targets) Usage of own exclusion lists with --exclude or --exclude-file is recommended to avoid scanning newly-valid addresses belonging to the US DoD. * Allow the -4 option for Nmap to indicate IPv4 address family. * Add verbosity level of 0 (-v0): not text output ==== pkg-config ==== Version update (0.29 -> 0.29.1) - Update to version 0.29.1: + Fixed a regression from 0.29 with unquoting values queried with - -variable. In some cases, this would cause shell special characters to be escaped in ways they weren't before. Instead, the unquoting only occurs if the value appears to be quoted (fdo#93284). + Add support for building pkg-config with Microsoft Visual Studio (fdo#92489). + Allow overriding pkg-config variables with environment variables. By setting an environment variable of the form PKG_CONFIG_$PACKAGE_$VARIABLE, a pkg-config variable can be set globally without always having to pass --define-variable (fdo#90917). + Honor -Wl,-framework in addition to -framework so that multiple frameworks are handled on OSX (fdo#1278). + Fix the OSX build using --with-internal-glib (fdo#92902). ==== sshfs ==== Version update (2.5 -> 2.7) - update to 2.7 - spec-cleaned spec file * Added -o cache_max_size=N option to let users tune the maximum size of the cache in number of entries. * Added -o cache_clean_interval=N and -o cache_min_clean_interval=N options to let users tune the cleaning behavior of the cache. - update to 2.5 * Add -o disable_hardlink option (debian bug #670926). * Optimize readdir by sending multiple requests in parallel. Add -o sync_readdir to restore old behavior. * Map SSH2_FX_FAILURE to ENOTEMPTY for rmdir. * When checking root directory use LSTAT not STAT. This prevents I/O error being returned after a successful mount if a symlink is mounted. - Remove redundant tags/sections from specfile - Parallel build with %_smp_mflags - update to 2.4 * Add "-oworkaround=fstat" for SFTP servers which don't support the FSTAT message. Patch by: Percy Jahn * Remove "-oPreferredAuthentications" from ssh options if the "password_stdin" option is used. Reported by E. Kuemmerle * Fix double free if reconnection races with request sending. Patch by E. Kuemmerle * Submit max 32k reads and writes to the sftp server. Also don't limit the kernel to 64k reads and writes, rather split into 32k sized chunks and send them to the server all at once. This is more efficient and less demanding from the server. Reported by Ludovic Court�s. Fix suggested by Niels M�ller * Make chown respect the UID mapping policy. Reported and tested by Vivenzio Pagliari * Add -o idmap=file, -o uidmap=FILE, -o gidmap=FILE. These options allow you to create a pair of local files, similar to /etc/passwd or /etc/group files from the remote server, and use those to remap all the given UIDs/GIDs. * Add -o slave. This option routes the sftp communication over stdin and stdout, bypassing SSH and network. * Make sure idmap files aren't writable by others otherwise, other local users could change the mapping, and gain access to things they shouldn't. Patch by Mike Kelly - add automake as buildrequire to avoid implicit dependency - updated to 2.3 * Add hard link operation * Fix possible deadlock on reconnection * Fix cleanup when ssh connection is terminated to prevent sshfs hanging when the server is rebooted, for example * Set FD_CLOEXEC on fuse device to prevent deadlocks * Check mountpoint and fuse options before starting an ssh session * Allow mounting a single non-directory from the server * Add option 'delay_connect' * Print usage information and version to stdout, not stderr - licenses package is about to die - updated to version 2.2 * Handle numerical IPv6 addresses enclosed in square brackets. * Fix error if username contains a comma character - updated to version 2.1 * Support password authentication with pam_mount * Support atomic renames if server is OpenSSH 4.9 or later * Support getting disk usage if server is OpenSSH 5.1 or later * Add man page * Improved ssh option support * Improved support for specifying a special ssh command * Fix bug that could cause corruption with append mode writes * Allow specifying an ssh config file - updated to version 1.9 * Fix crash when writing large files on SMP * Fill in st_ctime attribute * Add mount subtype support * Small optimizations -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] perl-Goo-Canvas missing
by Bjoern Voigt 23 Mar '16

23 Mar '16

What happened with the package perl-Goo-Canvas? The package is listened here for Tumbleweed: https://software.opensuse.org/package/perl-Goo-Canvas But it can't be found in Tumbleweed (see "zypper search perl-Goo-Canvas" command). For instance gscan2pdf needs this package. See comment here: https://build.opensuse.org/package/show/GNOME:Apps/gscan2pdf Greetings, Björn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] openSUSE Tumbleweed - Status information
by Dominique Leuenberger / DimStar 23 Mar '16

23 Mar '16

Dear Tumbleweed users and hackers, The latest snapshot, 20160308, has been fully built by OBS and tested by openQA. It has not been released to the users, due to an identified issue: ! ! ! i586 systems fail to boot ! ! ! The changes in the snapshot would lead to believe that the kernel update to version 4.4.4 is at fault but unfortunately the problem is deeper nested. In fact, the issue sneaked into the 0305 snapshot, when binutils 2.26 was checked in (this is also not really confirmed, but based on current findings, everything points in this direction). The binutils update did not cause the kernel to be rebuilt, thus there is no problem on any system having updated to binutils 2.26 - as long as they don't build their kernel for an i586 system There are a couple people working on finding the reason for this break and, more importantly, a solution for it. Until that moment, I'm afraid, we won't be able to release any Tumbleweed Snapshot (except if we all agree and accept that i586 is of no importance to Tumbleweed and we can live with this breakage). The obvious 'revert' paths are not as simple as I wish they were: * Reverting to kernel 4.4.3 - won't help, as it will still be rebuilt with binutil 2.26, thus having the same issue * Reverting to binutils 2.25 - I had to do that already once in a staging and it took like 2 weeks to recover - as gcc is built against binutils 2.26 and won't be able to link anything once binutils 2.25 is being used - making bootstrapping a complete pain (it's easier moving forward in versions than backwards). So, until a proper / good fix is found, I ask all the i586-interested people to find the time and donate their resources to actually make this work again... this is THE opportunity to show that the community wants i586 to survive. Cheers, Dominique PS: all findings are documented in bugzilla, https://bugzilla.opensuse.org/show_bug.cgi?id=970239 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 13

[opensuse-factory] wine-32bit needed in 64bit TW?
by Robby Engelmann 22 Mar '16

22 Mar '16

Hi all, I am wondering why wine-32bit is installed on a 64-bit system by doing a "zypper in wine"? Does anybody know that? It pulls in a lot of 32-bit packages. Cheers, Robby. -- Jabber: robby81(a)jabber.de -- Jede meiner Mails ist mittels PGP signiert. Die Signatur kann einfach mit meinem öffentlichen Schlüssel auf den Standard Key-Servern geprüft werden und zum Senden von verschluesselten Mails an mich genutzt werden. --

3 2

[opensuse-factory] Plasma 5 incompatible with *-nvidiaG04-* packages (13.2)
by André Verwijs 22 Mar '16

22 Mar '16

Plasma 5 incompatible..!!! with 13.2 packages: x11-video-nvidiaG04, nvidia-glG04, nvidia-computeG04, nvidia-gfxG04-kmp-desktop, nvidia-uvm-gfxG04-kmp-desktop for Leap/tumbleweed we need updated packages or alternative packages..!! see bugreport #360376 https://bugs.kde.org/show_bug.cgi?id=360376 Bug #353520 is a Fedora bug so has nothing to do with Opensuse.... other (opensuse) users with same problem, please add logfiles/backtraces thank you... André -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 12

[opensuse-factory] Snapshot archive or other fallback options?
by Bjoern Voigt 22 Mar '16

22 Mar '16

My question is probably a FAQ question: Are there any public Tumbleweed snapshot archives? If not, are there any plans for this? (For a small amount of packages I can easily make my own archive with the option "keeppackages=1" in a repository (*.repo) file. I do this for instance for Kernel packages from Kernel:stable repository. If the newest Kernel causes some problems (which is very seldom), I can manually downgrade to an older version (together with the older kernel-source package), re-install the NVidia driver and other additional modules and reboot. But with thousands of installed packages this is impracticable.) Greetings, Björn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Was 20160321 intentionally released to TW without openQA?
by Jimmy Berry 22 Mar '16

22 Mar '16

It seems 20160321 skipped openQA and snpashot while being released to TW oss repo (http://download.opensuse.org/tumbleweed/repo/oss/suse/x86_64/). Noticed on my dashboard before updating http://tumbleweed.boombatower.com/. Presumably this was a mistake? -- Jimmy -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

Re: [opensuse-factory] What's happening to Virtualbox guest addons?
by Roman Bysh 21 Mar '16

21 Mar '16

On 03/19/2016 06:37 AM, Howard Guo wrote: > Hi fellow tumbleweed users. > > > > After having upgraded to the latest snapshot, my tumbleweed virtual > machine again fails to light up display. According to system journal, > vboxadd service failed with error “/var/lib/VBoxGuestAditions/config not > found”, and it does not help to reinstall guest addon packages. > > > > Does anyone have a remedy? > > > > Kind regards, > > Howard > Switch the display manager from sddm to lightdm. /etc/sysconfif/displaymanager DISPLAYMANAGER=”lightdm” Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Next openSUSE Leap 42.1 kernel update
by Takashi Iwai 21 Mar '16

21 Mar '16

Hi, I'm going to submit the next kernel update for openSUSE Leap 42.1 in this week. As of now, it's based on 4.1.20 stable kernel. If anyone is willing to test, please check the kernel packages in OBS Kernel:openSUSE-42.1 repo, and report back if any regression is seen. thanks, Takashi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Re: [opensuse] Need help with setting wifi
by Kapcsándi István 21 Mar '16

21 Mar '16

oszko(a)chem.u-szeged.hu a következőt írta ekkor: 2016. március 21., hétfő 18:30:47 CET > The airplane lamp is on again... And the network is unavailable. As > far as I know, the notebook has an Intel dualband wifi which needs > iwlwifi driver and 7265-8 and 7265-9 firmware. These are in > /etc/firmware. > After booting I have wired network, but for a short time only, it is > kicked off, and cannot connect again, only by rebooting. Network > manager is not very responsive. > > Help would be welcome > Albert > hi, maybe you need a newer fireless firmware for your hardware. First, look at the boot log and search for something like this Mar 21 06:58:17 linux-gmdj kernel: Intel(R) Wireless WiFi driver for Linux Mar 21 06:58:17 linux-gmdj kernel: Copyright(c) 2003- 2015 Intel Corporation Mar 21 06:58:17 linux-gmdj kernel: iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-3160-17.ucode failed with error -2 Then (connect your wired network and) go to https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi and download the matching firmware - I guess wlwifi-7265-ucode-16.242414.0.tgz Then extract it to /lib/firmware Then reboot Profit! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0