April 2015 - openSUSE Factory - openSUSE Mailing Lists

Re: [opensuse-factory] default routeS post-13.1
by Felix Miata 08 Apr '15

08 Apr '15

Andrei Borzenkov composed on 2015-04-07 06:53 (UTC+0300): > Mon, 06 Apr 2015 23:45:04 -0400 Felix Miata composed: >> Andrei Borzenkov composed on 2015-04-07 06:22 (UTC+0300): >> > Felix Miata composed: >> >> Can more than one default route per interface be configured? >> I think I partially answered this by experiment. I booted TW to find default >> route 192.168.1.1 while using router with 192.168.0.1. I ran >> route add default gw 192.168.0.1 eth0 >> That produced: >> Kernel IP routing table >> Destination Gateway Genmask Flags Metric Ref Use Iface >> 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 >> 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 >> 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 >> which is working, but I have no idea if this holds any potential problem. > Your system is using single router 192.168.0.1. >> > How is it supposed to work? >> I don't know. >> > How should system select which route to use? >> Round robin? > So half of the packets get lost? You tell me. >> Pick fastest? > Define fastest ... s/fastest/most responsive/ >> First in list? > That is what it currently does. It will always use the first one. So > having more than one effectively does nothing. Then with mc I could comment one line or the other according to which used, assuming it gets picked up right away as when a change to /etc/hosts gets made to deny access to another adserver. >> >> I configure my own installations with fixed IP. I want to be able to take any >> >> of them elsewhere, discover the IP of the relevant gateway/router, and using >> >> mcedit, change, or add, whatever is necessary, without starting any GUI, >> >> YaST, or any kind of "manager". Is this asking too much? >> > Show fix IP you configured and IP of (default) router you want to use. >> location 1 (router 1): 192.168.0.1 >> location 2 (router 2): 192.168.1.1 > I assume default netmask ... >> host: 192.168.0.121 > Second one won't work. Gateway must be on locally attached network. It > had always been this way. Even if you manage to fool your system in > sending packets to this address, gateway won't know how to reply. I'm not necessarily trying to have both configured at once. I only want it simple to change if I bring a PC to some network that uses a different router IP. I now have this particular host configured with fixed IP on 13.1 and TW, and DHCP on 13.2 and the other 13.1. All seems good here except with TW. In TW, actions affecting network, like mounting a NFS share, or pinging, exhibit huge delays. Network throughput, as when running zypper dup, seems normal. This is some data from 13.3 as of last having yast2 do network configuration, then disabling Wicked's DHCP and nanny, which I hoped would eliminate the delays, but did not: # ll /boot/initrd-3.19.3* -rw------- 1 root root 5859740 Apr 7 01:38 /boot/initrd-3.19.3-1-desktop /etc/sysconfig/network # ls -l -rw-r--r-- 1 root root 11617 Feb 23 20:35 config -rw-r--r-- 1 root root 139 Apr 7 05:21 dhcp -rw------- 1 root root 143 Feb 23 20:30 ifcfg-eth0 -rw------- 1 root root 173 Mar 18 08:25 ifcfg-lo -rw-r--r-- 1 root root 21738 Feb 20 06:45 ifcfg.template -rw-r--r-- 1 root root 29 Apr 7 05:21 ifroute-eth0 -rw-r--r-- 1 root root 0 Apr 7 05:21 routes # cat ifcfg-eth0 BOOTPROTO='static' IPADDR='192.168.0.121/24' BROADCAST='192.168.0.255' STARTMODE='onboot' NAME='NetXtreme BCM5751 Gigabit Ethernet PCI Express' # cat ifroute-eth0 default 192.168.0.1 - eth0 # systemctl list-units | grep wick wicked.service loaded active exited wicked managed network interfaces wickedd-auto4.service loaded active running wicked AutoIPv4 supplicant service wickedd.service loaded active running wicked network management service daemon # systemctl list-unit-files | grep wick wicked.service enabled wickedd-auto4.service enabled wickedd-dhcp4.service disabled wickedd-dhcp6.service disabled wickedd-nanny.service disabled wickedd.service enabled # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:... inet addr:192.168.0.121 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:464 errors:0 dropped:0 overruns:0 frame:0 TX packets:506 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:50224 (49.0 Kb) TX bytes:44907 (43.8 Kb) Interrupt:16 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 # ping www.google.com PING www.google.com (216.58.219.164) 56(84) bytes of data. 64 bytes from mia07s27-in-f4.1e100.net (216.58.219.164): icmp_seq=1 ttl=47 time=26.5 ms 64 bytes from mia07s27-in-f4.1e100.net (216.58.219.164): icmp_seq=2 ttl=47 time=27.1 ms 64 bytes from mia07s27-in-f4.1e100.net (216.58.219.164): icmp_seq=3 ttl=47 time=26.8 ms 64 bytes from mia07s27-in-f4.1e100.net (216.58.219.164): icmp_seq=4 ttl=47 time=25.8 ms ^C64 bytes from 216.58.219.164: icmp_seq=5 ttl=47 time=31.3 ms --- www.google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 20347ms rtt min/avg/max/mdev = 25.825/27.548/31.371/1.973 ms The above ping looks almost normal, omitting the length of time elapsed before output shows on screen. Rather than nearly instant start of response, 10-12 seconds elapse before first line prints, and rather than subsequent following 1 or 2 seconds later each, the delay is approximately 5 seconds each. The telling number is that 20347. Doing the same on this host, that number is 4004, 80% less. So, apparently, one of the observed "failures" earlier in the day was lack of patience in that 10-12 interval, hitting ctrl-C instead of waiting for the delayed output. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] New Tumbleweed snapshot 20150406 released!
by Ludwig Nussel 08 Apr '15

08 Apr '15

Changed packages: ==== atmel-firmware ==== - Use url for source ==== bluez ==== Version update (5.28 -> 5.30) Subpackages: bluez-cups bluez-devel libbluetooth3 - update to version 5.30 The highlight of this release is the completion of the GATT D-Bus APIs. We?ve now got both the client and server functionality in place, however it?s still behind the -E (--experimental) command line switch. The API is documented in doc/gatt-api.txt and there are several test tools for it in the tree (even bluetoothctl has support for it). Another new (and still experimental) D-Bus API that debuts with this release is one for managing LE Advertising, i.e. acting in peripheral role. The API is documented in doc/advertising-api.txt. Besides the new features, there are several fixes to AVCTP, AVDTP & AVRCP. There?s also a fix for C++ compiler compatibility with the library headers as well as a fix for device information not being stored in certain corner cases. - add bluez-5.30-disable-broken-tests.diff to fix test suite - remove -fstack-reuse=none workaround - remove 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch - Build the testsuite with -fstack-reuse=none to workaround broken test setup. [bnc#923768] - update to version 5.29 This is a comparatively large release with over a month and 475 commits since 5.28. There have been lots of fixes to the Android side. Our internal GATT library (used both by ?normal? BlueZ as well as the Android version) received lots of updates for this release. Other notable changes are a fix for AVCTP key repeat timeout as well as added support for the Multi Profile Specification (MPS). - add 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch from bluez-devel for fixing test case failure (will be included in next bluez release) ==== dos2unix ==== Version update (7.2 -> 7.2.1) - Update to 7.2.1 * Fix: Skip the GB18030 tests when the system does not support the Chinese locale with GB18030 character encoding. * Fix: Small corrections in the manual in section GB18030 and OPTIONS -m. ==== farstream-data ==== Subpackages: gstreamer-plugins-farstream libfarstream-0_2-5 - Add farstream-plugin-path.patch: use library policy compliant path name for plugin. ==== flac ==== Subpackages: flac-devel libFLAC++6 libFLAC8 libFLAC8-32bit - Build documentation as noarch ==== gperf ==== - Add gpg signature - Correct info requirements - Cleanup spec file with spec-cleaner ==== ibus ==== Subpackages: ibus-branding-openSUSE-KDE ibus-gtk ibus-gtk-32bit ibus-gtk3 libibus-1_0-5 libibus-1_0-5-32bit python-ibus typelib-1_0-IBus-1_0 - Fix boo#924696: settings of ibus engines are not saved * Remove inappropriate %ghost from the dconf files - Disable appindicator for 13.1 * It requires Qt 5.3 to show icons specified by absolute path ==== iw ==== Version update (3.17 -> 4.0) - Update to version 4.0 * Support all new kernel features upto 4.0 - Cleanup spec file with spec-cleaner - User url for source ==== k3b ==== - Remove unnecessary Requires: cdparanoia-devel, this was added as a workaround for a bug in the 2.0.80git version (kde#328769), but this is long fixed and never was present in the stable 2.0 branch anyway ==== kbd ==== - Regenerate the initrd if this package changes as it is included there for early console setup. ==== kmod ==== Subpackages: kmod-compat libkmod2 - If kmod packge changes, regenerate the initrd. ==== libkolab0 ==== Version update (0.5.3 -> 0.6.0) - Add upstream patch: + libkolab-0.6.0_check_for_generic_tag.patch Make libkolab compile with upstream kdepimlibs where GENERIC tags are not yet included. - New upstream release 0.6.0 - Added upstream patches: + 0001-Add-support-for-exceptions.patch Add support to read/write exceptions to iCal + 0002-Support-for-THISANDFUTURE.patch Add support to convert ThisAndFuture from and to iCal + 0003-Move-QT_DECLARE_METADATA-logic-to-cmake.patch Fix double declaration of KCalCore::Duration when building with libcalendaring >= 4.9.1 - Add %bcond_with tests to enable %check section when required - Convert %with_kde to %bcond_without kde ==== libkolabxml1 ==== Version update (1.0.3 -> 1.1.0) - New upstream release 1.1.0 - Drop patch (upstream inclusion): - libkolabxml-1.0.3_make_version_attribute_not_a_fixed_value.patch - Add libkolabxml-1.0.3_make_version_attribute_not_a_fixed_value.patch: Instead of a fixed value, we only use a default value. Fixes problems where objects created with version string '3.0dev' can not be fetched/displayed. - Convert %with_java to %bcond_without java - Allow building without mono bindings ==== libreoffice ==== Version update (4.4.1.2 -> 4.4.2.2) Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-ru libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions - Version bump to 4.4.2: * 2nd bugfix update for the 4.4 series - BuildRequires: libodfgen-devel >= 0.1 - added version numbers to some BuildRequires lines - build does not require python3-lxml - build requires librevenge-devel >= 0.0.1 - vlc media backend is broken, don't use it. Only gstreamer should be used. ==== libzypp ==== Version update (14.38.0 -> 14.38.1) - Fixes to build with gcc5 - RepoProvideFile: Suppress MediaChangeReport while testing multiple baseurls (bnc#899510) - version 14.38.1 (30) ==== libmutter0 ==== Subpackages: mutter mutter-data typelib-1_0-Meta-3_0 - Change from simple %defines to %bcond_with/without, as this allows to be set in prjconf without the need to patch the .spec files. + build_wayland has been replaced with the equivalent %bcond_with, resp. %bcond_without, based on the value that was originally set, resulting in no change for the build. ==== shotwell ==== Version update (0.21.0 -> 0.22.0) - Update to version 0.22.0: + Improved metadata support for Facebook upload (bgo#742163). + Saved search now properly supports text is-set, not-set (bgo#743924, bgo#743923). + Import title, exposure time when available. + User interface improvements (bgo#744291, bgo#719284, more). + Sort photos by filename (bgo#717878). + Updated translations. ==== valgrind ==== Version update (3.10.0 -> 3.10.1) Subpackages: valgrind-devel - Cleanup spec file with spec-cleaner - Update to 3.10.1 * bugfix release (for full list of solved issues see NEWS file) ==== xfce4-vala ==== - Add support for vala 0.28 in Factory ==== yast2-ruby-bindings ==== Version update (3.1.30 -> 3.1.31) - Added new RSpec argument matcher: path_matching - 3.1.31 ==== libnis1 ==== Version update (3.0.1 -> 3.3) Subpackages: yp-tools - Revert changes from Dec 4th and 6th, most of them were wrong. - Update to version 3.3: - fix some linking issues - add yp_dump_binding - Fix file descriptor leak in libnis - Fix wrong fallback for binding files in libnis - Fix link order - Implement locking for multithreaded applications ==== zypper ==== Version update (1.11.23 -> 1.11.24) Subpackages: zypper-aptitude zypper-log - Update zypper-po.tar.bz2 - Update zypper-po.tar.bz2 - Update zypper-po.tar.bz2 - Update zypper-po.tar.bz2 - suppress MediaChangeReport while testing multiple baseurls (bnc#899510) - allow repo:package to reinstall from a different repo (bnc#725867) - fix wrong description of --force-resolution defaults - version 1.11.24 - Update zypper-po.tar.bz2 Removed packages: Added packages: -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7

[opensuse-factory] [Tumbleweed] System hangs on reboot/poweroff from Login Screen
by Sumit Bhardwaj 07 Apr '15

07 Apr '15

Hi All, Currently I am on the latest Tumbleweed snapshot with Gnome installed from Live DVD image. Hardware is a X240 Thinkpad with Core i7 4600U processor, 8 GB RAM, 1 TB SSHD and Intel HD4400 graphics. Since last few update (I suppose when Systemd was updated), Along with the Plymouth switching to text mode screen issue, I am facing this issue where if I try to reboot my system from the login screen (GDM), the screen gets switched off and there is no further activity. I have to force shutdown it using power button. This also happens post login if I try to restart or power off within first few minutes of login. Shutdown/reboot attempts post 10-15 minutes work fine. The issue happens regardless of whether I attempt a shutdown/reboot from the Gnome Top Bar menu or from command line using poweroff or reboot commands. I am not able to figure out anything wrong from journald output. Can anybody show me the direction in which I can proceed? Thanks. -- Regards, Sumit Bhardwaj -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Monospace font issue
by Kyrill Detinov 07 Apr '15

07 Apr '15

Hello. Recently updated my Factory running workstation (x86_64, Xfce). Monospace font interval is increased badly. I'm sure, I use DejaVu Sans Mono as a monospace font. I choose 'monospace 9' in programs settings. There is a screenshot: http://susepaste.org/view/simple/38919191 Changing to 'DejaVu Sans Mono 9': http://susepaste.org/view/simple/70371539 It looks like it was before. % fc-match Monospace Fontconfig warning: "/etc/fonts/conf.d/56-user.conf", line 14: reading configurations from ~/.fonts.conf is deprecated. please move it to /home/kent/.config/fontconfig/fonts.conf manually Monospace: "Monospace" "Regular" -- WBR Kyrill

9 23

[opensuse-factory] Plasma 5: system tray not loading, services not showing. ...
by dutchgigalo＠gmail.com 06 Apr '15

06 Apr '15

Plasma 5: system tray not loading, services not showing, like Dropbox, insync or shutter etc. (Will add more detail later...) André -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Plasma 5: system tray not loading, services not showing
by dutch.glory＠yahoo.com 06 Apr '15

06 Apr '15

Plasma 5: system tray not loading, services not showing, like Dropbox, insync or shutter etc. (Will add more detail later...) André -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Graphical Plymouth Themes not working in Tumbleweed, Text Mode Themes works fine
by Sumit Bhardwaj 06 Apr '15

06 Apr '15

Hi All, Not sure whether this is this is the correct place to discuss this. I am currently on the latest tumbleweed snapshot (20150330) with kernel 3.19.3-1-desktop X86_64 and Gnome 3.16. Since Last few updates, Plymouth themes that display some graphics or animation like the default openSUSE theme etc do not work. Instead the text theme with 3 question marks at the center of screen kicks in. If I set it to some text based theme like tribar, details etc, it works fine. From the look of the display, it seems there is some problem with Plymouth while switching to the graphical mode. BTW, I am using it on a Thinkpad X240 with Haswell Core i7 4600U, 8 GB RAM and Intel HD4400 graphics. Can anybody guide me how to resolve this? I am new to openSUSE but I have been a Linux user since 8-9 years, mostly Fedora and little bit of Debian experience as well. Thanks. -- Regards, Sumit Bhardwaj -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 9

[opensuse-factory] New package submission to factory - xboxdrv
by Robert Munteanu 06 Apr '15

06 Apr '15

Hi, I'd like to introduce a new submission for factory - xboxdrv [0]. >From the project page: xboxdrv is a Xbox/Xbox360 gamepad driver for Linux that works in userspace. It is an alternative to the xpad kernel driver and has support for Xbox1 gamepads, Xbox360 USB gamepads and Xbox360 wireless gamepads, both first and third party. The Xbox360 guitar and some Xbox1 dancemats might work too. The Xbox 360 racing wheel is not supported, but shouldn't be to hard to add if somebody is interested. As a personal note, I found and packaged xboxdrv after finding out that xpad is badly broken [2] and had no problems since. xboxdrv currently lives in hardware [3] and I'll forward it to factory at the end of the week. Robert [1]: http://pingus.seul.org/~grumbel/xboxdrv/ [2]: https://forums.opensuse.org/showthread.php/506132-openSUSE-13-2-weird-behav… [3]: https://build.opensuse.org/package/show/hardware/xboxdrv -- http://robert.muntea.nu/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20150405 released!
by Ludwig Nussel 06 Apr '15

06 Apr '15

Changed packages: ==== blender ==== - Enable build with cycles - see bnc#905649 ==== calibre ==== Version update (2.22.0 -> 2.23.0) - Update to version 2.23.9: * New features: - Allow adding an empty ebook in various formats to existing book records by right clicking the Add Books button. - Add ability to create additional empty formats to the 'Add empty book' command. - News download: Add API to cleanly abort the download of an article during the preprocess stage based on the article's contents. * Bug Fixes: - MOBI Input: Fix links not working in viewer for MOBI files that contain anchors placed on linebreak elements. - Book details panel: Fix copying Path link by right clicking on it not working. - Fix a regression that caused importing of a single book from a directory to fail if the directory has no ebook files in it. - Column Icons: Fix apostrophes in icon filenames causing errors. - Edit Book: Fix a regression that caused Remove unused CSS to fail on invalid CSS selectors, instead of ignoring them. * Improved news sources: - Esquire - Courrier International - CNET - Tageschau ==== dejagnu ==== Version update (1.5.2 -> 1.5.3) - Update to dejagnu 1.5.3 * More bugfixes ==== ghostscript ==== Version update (9.15 -> 9.16) Subpackages: ghostscript-devel ghostscript-x11 - Version upgrade to 9.16. Primarily a maintenance release. There are no recorded incompatible changes (as of this writing). Highlights in this release include: * "LockColorants" command line option for tiffsep and psdcmyk devices. * Improved high level devices handling of Forms. See http://www.ghostscript.com/doc/9.16/News.htm For details see the News.htm and History9.htm files. - fix.including.pread.pwrite.pthread_mutexattr_settype.diff is no longer needed because it is fixed in the upstream sources. - fix.including.pread.pwrite.pthread_mutexattr_settype.diff fixes on SLE11 implicit declaration of function warnings for 'pread' 'pwrite' 'pthread_mutexattr_settype' see http://bugs.ghostscript.com/show_bug.cgi?id=695882 - ppc64le-support.patch is a remainder of the previous patch now the hunk for LCMS (lcms/include/lcms.h) is removed because LCMS 1.x is removed since Ghostscript 9.16 but the hunk for LCMS2 (lcms2/include/lcms2.h) is still needed see http://bugs.ghostscript.com/show_bug.cgi?id=695544 - Version upgrade to 9.16rc2 (second release candidate for 9.16). For details see the News.htm and History9.htm files. Regarding installing packages (in particular release candidates) from the openSUSE build service development project "Printing" see https://build.opensuse.org/project/show/Printing - For SLE12 build it with traditional CUPS 1.5.4 to ensure it works on SLE12 both with CUPS 1.7.5 and CUPS 1.5.4. ==== glibc-32bit ==== Subpackages: glibc-locale-32bit - aarch64-sigstksz.patch: Increase MINSIGSTKSZ and SIGSTKSZ (BZ #16850) - powerpc-software-sqrt.patch: Fix powerpc software sqrt (BZ #17964, BZ [#17967]) - nss-separate-state-getXXent.patch: Separate internal state between getXXent and getXXbyYY NSS calls (bsc#918187, BZ #18007) - static-tls-dtv-limit.patch: Fix DTV race, assert, DTV_SURPLUS Static TLS limit, and nptl_db garbage (bsc#919678, BZ #17090, BZ #17620, BZ #17621, BZ #17628) ==== glibc ==== Subpackages: glibc-devel glibc-extra glibc-info glibc-locale nscd - aarch64-sigstksz.patch: Increase MINSIGSTKSZ and SIGSTKSZ (BZ #16850) - powerpc-software-sqrt.patch: Fix powerpc software sqrt (BZ #17964, BZ [#17967]) - nss-separate-state-getXXent.patch: Separate internal state between getXXent and getXXbyYY NSS calls (bsc#918187, BZ #18007) - static-tls-dtv-limit.patch: Fix DTV race, assert, DTV_SURPLUS Static TLS limit, and nptl_db garbage (bsc#919678, BZ #17090, BZ #17620, BZ #17621, BZ #17628) ==== libgmime-2_6-0 ==== - Add --enable-mono/--disable-mono to configure call, based on the build condition. This avoids random rebuild failures (outside OBS) if mono happens to be installed on the building system. ==== librsync2 ==== - blake2-config.patch: add missing <config.h> ==== mercurial ==== Version update (3.3.2 -> 3.3.3) Subpackages: mercurial-lang - update to 3.3.3 This is a regularly-scheduled bugfix release. + adjustlinkrev: handle 'None' value as source + adjustlinkrev: prepare source revs for ancestry only once + amend: check for directory renames for both merge parents (issue4516) + annotate: reuse ancestry context when adjusting linkrev (issue4532) + dirstate: don't require exact case when adding dirs on icasefs (issue4578) + dirstate: make sure rootdir ends with directory separator (issue4557) + filemerge: clean up language in mergemarkertemplate help + forget: cleanup the output for an inexact case match on icasefs + hgweb: prevent loading style map from directories other than specified paths + mergecopies: reuse ancestry context when traversing file history (issue4537) + templates: fix "log -q" output of default style + templates: fix "log -q" output of phases style + win32: 'raise ctypes.WinError' -> 'raise ctypes.WinError()' ==== psmisc ==== - Add patch psmisc-22.21-boo908063.patch to avoid to close files which are never open (boo#908063) - add patch to fix fuser -M option active all the time (bnc#874983) psmisc-git-3638cc55b4d08851faba46635d737b24d016665b.patch - Update to version 22.21 * Missing comma in fuser(1) added Debian #702391 * pstree uses COLUMN env variable Debian #717017 * pstree shows proper thread names SF Bug#57 * pstree shows namespace options SF Patch#30 * killall.1 minor fixes SF Bug#59 * peekfd for m68k SF Patch#31 * Fixing some derefefed pointers SF Patch#32 * Minor typos in man pages SF Bug#61 Bug#60 * fuser -m and -M flags work either way Debian #606178 - Remove patch psmisc-22.20-pstree.patch as now part of upstream peekfd-m68k.patch as now part of upstream - Port the patches psmisc-22.20-upstream.patch which becomes psmisc-22.21-upstream.patch psmisc-22.20.dif which becomes psmisc-22.21.dif psmisc-22.12-pstree.patch which becomes psmisc-22.21-pstree.patch - Remove %fillup_prereq %insserv_prereq PreReq; package provides neither sysconfigfile or sysvinit script - Use %lang_package instead of define a lang subpackage manually - Use %configure instead of ./configure - Don't define CC and CXX flags manually - Remove redundant %clean section - peekfd-m68k.patch: Port peekfd to m68k - peekfd hasn't been ported to aarch64 yet - Update to version 22.20 + upstream patch * Make usage of linked lists of devices found in /proc/self/mountinfo optional * Make timeout() in timeout.c work with shared mmap to reduce the load due write/read the stat buffers * Add list_sort() to lists.h to be able to sort lists * pstree sorts properly on names Debian #682014 * fuser -m regresion fixed SF #3559232, thanks to hanpt * pstree finds orphaned processes SF#3537508 * fuser finds unix sockets again SF #3502649 * pstree finds pid 0 stops looping Debian #687829 * killall with no args exits again SF #3536526 * Added AC_CANONICAL_TARGET for target_os Debian #673485 * sed doesn't have [0-9]+ replace with [0-9][0-9]* * assert in killall triggered for small lifetimes Debian #628617 * killall MAX_NAMES off by one Debian #677428 * Removed remaining parts of pidof * fuser uses correct timeout_stat define Debian #661723 * fuser is not compiled on hurd-i386 Debian #673485 * No TEXTRELS in src/lists built as PIE on x86 * Fake pstree root for kernels with hidepid turned on * More fixes for Cygwin SF Patch #3511920 * pstree can show PGIDs SF Patch #3471056 - This should fix the bug reported by Madhu - Submit ASCII null fix in pstree upsrtream - Submit support for static background process for stat system call upstream - Rebuild package with upstream patches - Update to version 22.16 * Use strncpy for COMM_LEN and make it 18 characters to cover brackets in name. * don't change COMM_LEN, it breaks matching long commands Debian #661145 * Enable some harden AM_CFLAGS by default, use configure option - -disable-harden-flags to not use it. * Use ENOENT not EBADE for FreeBSD Debian #631566 * Fix prstat typos * Stop zombies by using waitpid Ubuntu #876387 by Peter Holik, SF#3429674 * Fixed minor older/younger typo in killall.1 thanks to Maikel Linke * Correct defines for timeout in configure.ac - add automake as buildrequire to avoid implicit dependency - Use __builtin___strcpy_ instead of __builtin___strcpy_chk to avoid trouble with char path[0] tag in struct handle (bnc#723304) - Make main fuser process more robust against broken pipe and check for helper process within a SIGCHLD handler - Handle internal size of structure stat by including config.h to avoid size missmatch during copy result back (bnc#720882) - Fix segfault in pstree, patch by Tetsuo Handa (bnc#718915). - back out the timeout patch, it breaks fuser on i586 completely (bnc#720882) - Update to pre version 22.15 + Really apply patch for SF#31110178 RH#651794 + Conditionally use fork before stat calls + Patch from Corrina Vinschen for compiling on cygwin + Remove doubled content in src/lists.h + Add another 2 for thread brackets in pstree.c - Change fork before stat calls to be in best case a second process using two pipes for bidirectional communication with main. - Update to version 22.14: + Fix file descriptor as weel as memory leaks in fuser + Strip @ symbol from file names read from /proc/net/unix + Above 2 changes close openSuSE bugs #536209, #529520, and #417841 and provided by Werner Fink + Applied patch from Werner Fink to avoid stat(2) on NFS mounts + Zeros process group memory - Patch by jgorig SF#3152925 RH#666213 + fuser -m -s flags work - Patch by jgorig SF#31110178 RH#651794 + fuser silent if /proc/swaps not available SF#3072134 + ppc 64 support for peekfd by jgorig SF#3166444 + jiffies now ULL in killall SF#3138538 + pstree can show parents of a process. Patch supplied by Curtis Hawthorne SF#3135157 + killall creates right size buffer instead of MAX_PATH Debian #623425 + check for /proc/$$/stat not /proc/self/stat which is not available on hurd platforms. Same Debian bug as above + fuser understands IPv6 addresses, removed comment in fuser.1 that it doesn't Debian #609904 + fuser -k only returns 0 if you kill something. + fuser doesn't complain if /proc/#/fd disappears SF#3310990 - Now use /proc/self/mountinfo to minimize the needs of running stat(2) system calls. The remaining stat(2) system calls are wrapped by an timeout function. - Add fix from upstream for a crash in peekfd - Update to version 22.13: + configure patch for x86_64 properly applied sf#3029302. + patch configure so pt_regs isn't used on SuperH. deb#588986 + Fixed configure.ac so only mipsel not mips compiles peekfd - Remove part of psmisc-22.12.dif that is upstream. - Remove AutoReqProv: it's default now. - Update to psmisc-22.12 * In fuser, switched the ipv6 and ipv4 checks around Debian #581604 * peekfd configure patch for x86_64 SF#2986027 * peekfd works with ARM and MIPS thanks to patch by Arnaud Patard * peekfd off-by-one patch applied SF#1948351 * pstree -a doesn't segfault on grsec kernels Debian #588152 * Another attempted at killall -SIGNAME Debian #573924 * fuser -k -m ... won't kill itself Debian #562767 * fuser -NAME fixed SF #2924691, Debian #563388, Gentoo #297423 * Added locale.h include for killall on non NLS SF #2922163 * Reversed normal file fuser -k check Debian #563387 * short option l returned in fuser Debian #539087 * long options terminated with 0s Debian #551833 * fuser only kills normal processes, patch thanks to Erik Li SF# 2892724 * New fuser -M if you REALLY want mount points, patch thanks to Jeremie LE HEN SF#2899709 * Fixed killall options for VTALRM and ILL Debian #559011 * pstree -a does not compact threads Debian #525632 * new program prtstat which prints contents of /proc/<pid>/stat Debian #281706 * killall restricts by date. Thanks to George Danchev Debian #544657 * long options terminated in pstree too to stop segfault * Re-worked fuser getopt again so -KILL options work Gentoo #297423 * Fix off-by-one overflow in pstree SF# 2832375 * Applied patch from Kari Hautio for lazy umount'ed filesystems SF#2545632 * Applied patch from Anonymous SF submitter to fix killall -l Fixes SF#2002570 * fuser will print mounts,nfs exports and swaps with -v Debian #356655 and SF#533958 * pstree and fuser have long options Debian #517412 * Fixed pstree -a off-by-one error in buffer, Debian #536243 * Changed configure.ac to not use CXX SF# 2789801 - peekfd is not available on hppa - use %_smp_mflags - fix overflow crash in pstree: add 2 to COMM_LEN for {...} brackets for threads - enable parallel building - do not package peekfd on SPARC (it is not built) - Detect current cwd to be able to compare local files (bnc#540927) - Yet an other fix for NFS based file detection in fuser - fix pstree -a crash (bnc#545265) with patch backported from 22.8 by Bj�rn Voigt <bjoern(a)cs.tu-berlin.de>. - For future use fix fd leak reported by David Binderman (bnc#536209) - Close file descriptor leak (bnc#529520) - Add ARM to nopeek - Remove oldfuser from file list - Update to psmisc-22.7 * Updated Polish, Russian, Swedish and Indonesian PO files * Changed fuser.1 so signal is SIGNAL to reduce confusion about wether or not it is a parameter Debian #517413 * fuser.1 references pkill(1) Debian #517414 * Added Chinese (traditional) PO file * Updated Russian PO file * Clarified -m and -c for fuser Debian #467289 * Patch from Arnaud Giersch to fix udp ports in fuser Debian #502208 * pstree man page mentions -Z may not be available Debian #478327 * pstree handles UTF-8 lengths much better Debian #413503 * killall says no process found when process not found Debian #500097 * pstree makes a bigger buffer for -al flags Debian #352603 * Dynamically reallocate buffer for fuser patch from Don Armstrong * Updated Indonesian PO file * peekfd off by one problem in fds Debian #460530 * Patch from Marcus Watts for better comm handling in pstree * Updated Hungarian po file * Updated French and German po files * Fuser -m detects more open sockets SF patch #1728412 Thnks marienz * Updated Italian, Chinese simplified, Dutch, Swedish and Polish po files * Removed old fuser - Adapt our patches - nfs4fuser: do not match on shadow mounts - resolve some memory leaks in fuser - nfs4fuser: be able to detect the root file system (bnc#464295) - nfs4fuser: make sure not to stumble on short named mount points to avoid to terminate processes on wrong mount points ==== info ==== Subpackages: makeinfo - Add gpg signature ==== xf86-input-evdev ==== Version update (2.9.1 -> 2.9.2) - Update to version 2.9.2 * Two fixes in this release, one to support Android MT devices, one to avoid an array index overflow. ==== xf86-input-synaptics ==== Version update (1.8.1 -> 1.8.2) - Update to version 1.8.2: * One significant change here: an artificial delay is now used between the button events of a doubletap. Some applications previously dropped the events because they had the same timestamp, with the delay this should now work fine. ==== yast2-pkg-bindings ==== Version update (3.1.22 -> 3.1.23) - Pkg::ResolvableProperties(): "version" value contains a full edition (in form "[epoch:]version[-release]"), additionaly return also "version_epoch", "version_version" and "version_release" with the parts of the edition (needed for FATE#318505) - 3.1.23 Removed packages: Added packages: libOpenImageIO1_5 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] cinnamon broke?
by emanuel 05 Apr '15

05 Apr '15

i have been using cinnamon/factory now for a while, all worked fine, even with some heavy tweaks i made to force kde rather than gnome, as of last cinn update it is broke, fall-back session error every time, created dummy user to check and same thing, fall-back session, used cinn from 13.2 current and again same thing, its a mystery , my trouble-shooting skills are nill it seems. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0