Hello community,
here is the log from the commit of package nfcutils for openSUSE:Factory checked in at 2013-06-29 19:43:11
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/nfcutils (Old)
and /work/SRC/openSUSE:Factory/.nfcutils.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "nfcutils"
Changes:
--------
--- /work/SRC/openSUSE:Factory/nfcutils/nfcutils.changes 2013-06-11 09:34:40.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.nfcutils.new/nfcutils.changes 2013-06-29 19:43:12.000000000 +0200
@@ -1,0 +2,6 @@
+Fri Jun 28 23:11:36 UTC 2013 - jengelh@inai.de
+
+- Update to final upstream release 0.3.2
+* No user-visible changes, just the version
+
+-------------------------------------------------------------------
Old:
----
nfcutils-0.3.1+svn1129.tar.xz
New:
----
nfcutils-0.3.2.tar.xz
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ nfcutils.spec ++++++
--- /var/tmp/diff_new_pack.2l7nXj/_old 2013-06-29 19:43:13.000000000 +0200
+++ /var/tmp/diff_new_pack.2l7nXj/_new 2013-06-29 19:43:13.000000000 +0200
@@ -1,7 +1,7 @@
#
# spec file for package nfcutils
#
-# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -14,30 +14,32 @@
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
+
+
Name: nfcutils
Summary: Near Field Communication (NFC) utilities
-Version: 0.3.1+svn1129
-Release: 0
-URL: http://code.google.com/p/nfc-tools/
License: GPL-3.0+
Group: Hardware/Other
+Version: 0.3.2
+Release: 0
+Url: http://code.google.com/p/nfc-tools/
#SVN-DL: http://nfc-tools.googlecode.com/svn/trunk/nfcutils/
+#DL-URL: http://nfc-tools.googlecode.com/files/nfcutils-0.3.2.tar.gz
Source: %name-%version.tar.xz
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-BuildRequires: autoconf, automake, pkgconfig, pkgconfig(libnfc) >= 1.6, xz
+BuildRequires: pkgconfig
+BuildRequires: xz
+BuildRequires: pkgconfig(libnfc) > 1.6.99
%description
This package contains one utility for listing NFC devices and
in-field tags or targets.
%prep
-%setup -qn %name
+%setup -q
%build
-if [ ! -e configure ]; then
- autoreconf -fi;
-fi;
%configure
make %{?_smp_mflags};
++++++ nfcutils-0.3.1+svn1129.tar.xz -> nfcutils-0.3.2.tar.xz ++++++
++++ 14920 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/AUTHORS new/nfcutils-0.3.2/AUTHORS
--- old/nfcutils/AUTHORS 2013-05-31 18:02:06.000000000 +0200
+++ new/nfcutils-0.3.2/AUTHORS 2013-06-13 17:54:04.000000000 +0200
@@ -1 +1 @@
-Romuald Conty
+Romuald Conty
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/INSTALL new/nfcutils-0.3.2/INSTALL
--- old/nfcutils/INSTALL 1970-01-01 01:00:00.000000000 +0100
+++ new/nfcutils-0.3.2/INSTALL 2012-04-02 19:37:09.000000000 +0200
@@ -0,0 +1,370 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/config.h.in new/nfcutils-0.3.2/config.h.in
--- old/nfcutils/config.h.in 1970-01-01 01:00:00.000000000 +0100
+++ new/nfcutils-0.3.2/config.h.in 2013-06-13 17:59:51.000000000 +0200
@@ -0,0 +1,182 @@
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */
+#undef HAVE_DOPRNT
+
+/* Define to 1 if you have the `fork' function. */
+#undef HAVE_FORK
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+ to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if your system has a GNU libc compatible `realloc' function,
+ and to 0 otherwise. */
+#undef HAVE_REALLOC
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDBOOL_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDIO_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasecmp' function. */
+#undef HAVE_STRCASECMP
+
+/* Define to 1 if you have the `strchr' function. */
+#undef HAVE_STRCHR
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strstr' function. */
+#undef HAVE_STRSTR
+
+/* Define to 1 if you have the `strtol' function. */
+#undef HAVE_STRTOL
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have that is POSIX.1 compatible. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `vfork' function. */
+#undef HAVE_VFORK
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_VFORK_H
+
+/* Define to 1 if you have the `vprintf' function. */
+#undef HAVE_VPRINTF
+
+/* Define to 1 if `fork' works. */
+#undef HAVE_WORKING_FORK
+
+/* Define to 1 if `vfork' works. */
+#undef HAVE_WORKING_VFORK
+
+/* Define to 1 if the system has the type `_Bool'. */
+#undef HAVE__BOOL
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* SVN revision */
+#undef SVN_REVISION
+
+/* Version number of package */
+#undef VERSION
+
+/* Define for Solaris 2.5.1 so the uint32_t typedef from ,
+ , or is not used. If the typedef were allowed, the
+ #define below would cause a syntax error. */
+#undef _UINT32_T
+
+/* Define for Solaris 2.5.1 so the uint64_t typedef from ,
+ , or is not used. If the typedef were allowed, the
+ #define below would cause a syntax error. */
+#undef _UINT64_T
+
+/* Define for Solaris 2.5.1 so the uint8_t typedef from ,
+ , or is not used. If the typedef were allowed, the
+ #define below would cause a syntax error. */
+#undef _UINT8_T
+
+/* Enable POSIX extensions if present */
+#undef _XOPEN_SOURCE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to the type of a signed integer type of width exactly 32 bits if
+ such a type exists and the standard includes do not define it. */
+#undef int32_t
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
+
+/* Define to `int' if does not define. */
+#undef pid_t
+
+/* Define to rpl_realloc if the replacement function should be used. */
+#undef realloc
+
+/* Define to `unsigned int' if does not define. */
+#undef size_t
+
+/* Define to the type of an unsigned integer type of width exactly 16 bits if
+ such a type exists and the standard includes do not define it. */
+#undef uint16_t
+
+/* Define to the type of an unsigned integer type of width exactly 32 bits if
+ such a type exists and the standard includes do not define it. */
+#undef uint32_t
+
+/* Define to the type of an unsigned integer type of width exactly 64 bits if
+ such a type exists and the standard includes do not define it. */
+#undef uint64_t
+
+/* Define to the type of an unsigned integer type of width exactly 8 bits if
+ such a type exists and the standard includes do not define it. */
+#undef uint8_t
+
+/* Define as `fork' if `vfork' does not work. */
+#undef vfork
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/configure.ac new/nfcutils-0.3.2/configure.ac
--- old/nfcutils/configure.ac 2013-05-31 18:02:06.000000000 +0200
+++ new/nfcutils-0.3.2/configure.ac 2013-06-13 17:55:59.000000000 +0200
@@ -1,4 +1,4 @@
-AC_INIT([nfcutils],[0.3.1],[rconty@il4p.fr])
+AC_INIT([nfcutils],[0.3.2],[romuald@libnfc.org])
AC_CONFIG_HEADER(config.h)
@@ -59,7 +59,7 @@
AC_SUBST([DEBUG_CFLAGS])
# Checks for pkg-config modules.
-LIBNFC_REQUIRED_VERSION=1.6.0
+LIBNFC_REQUIRED_VERSION=1.7.0
PKG_CHECK_MODULES([libnfc], [libnfc >= $LIBNFC_REQUIRED_VERSION], [], [AC_MSG_ERROR([libnfc >= $LIBNFC_REQUIRED_VERSION is mandatory.])])
AC_SUBST(libnfc_LIBS)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/debian/changelog new/nfcutils-0.3.2/debian/changelog
--- old/nfcutils/debian/changelog 2013-05-31 18:02:06.000000000 +0200
+++ new/nfcutils-0.3.2/debian/changelog 1970-01-01 01:00:00.000000000 +0100
@@ -1,36 +0,0 @@
-nfcutils (0.3.0-pre1-0) unstable; urgency=low
-
- * Update libnfc version.
-
- -- Romuald Conty Thu, 16 Sep 2010 20:42:42 +0200
-
-nfcutils (0.2.9-0) unstable; urgency=low
-
- * New upstream release.
-
- -- Romuald Conty Thu, 16 Sep 2010 20:42:42 +0200
-
-nfcutils (0.2.0-0) unstable; urgency=low
-
- * New upstream release.
-
- -- Romuald Conty Thu, 18 Mar 2010 16:42:42 +0100
-
-nfcutils (0.1.2-0) unstable; urgency=low
-
- * New upstream release.
-
- -- Romuald Conty Fri, 28 May 2010 16:42:42 +0100
-
-nfcutils (0.1.1-0) unstable; urgency=low
-
- * New upstream release.
-
- -- Romuald Conty Thu, 11 Feb 2010 17:42:42 +0100
-
-nfcutils (0.1.0-0) unstable; urgency=low
-
- * First release.
-
- -- Romuald Conty Thu, 11 Feb 2010 14:42:42 +0100
-
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/debian/compat new/nfcutils-0.3.2/debian/compat
--- old/nfcutils/debian/compat 2013-05-31 18:02:06.000000000 +0200
+++ new/nfcutils-0.3.2/debian/compat 1970-01-01 01:00:00.000000000 +0100
@@ -1 +0,0 @@
-7
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/debian/control new/nfcutils-0.3.2/debian/control
--- old/nfcutils/debian/control 2013-05-31 18:02:06.000000000 +0200
+++ new/nfcutils-0.3.2/debian/control 1970-01-01 01:00:00.000000000 +0100
@@ -1,14 +0,0 @@
-Source: nfcutils
-Section: devel
-Priority: optional
-Maintainer: Romuald Conty
-Build-Depends: debhelper (>= 5.0.37.2), libnfc-dev (>= 1.7.0)
-Standards-Version: 3.7.3
-Homepage: http://code.google.com/p/nfc-tools/wiki/nfcutils
-
-Package: nfcutils
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: Near Field Communication (NFC) utilities
- This package contains one utility for listing NFC devices and in-field tags or targets.
-
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/debian/copyright new/nfcutils-0.3.2/debian/copyright
--- old/nfcutils/debian/copyright 2013-05-31 18:02:06.000000000 +0200
+++ new/nfcutils-0.3.2/debian/copyright 1970-01-01 01:00:00.000000000 +0100
@@ -1,27 +0,0 @@
-This package was debianized by Romuald Conty on
-Thu, 11 Feb 2010 14:42:42 +0100.
-
-It was downloaded from: http://code.google.com/p/nfc-tools/downloads/list
-
-Copyright (C) 2009, 2010 by Romuald Conty
-
-License: GNU General Public License version 3
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 3
- as published by the Free Software Foundation
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-On Debian GNU/Linux systems, the complete text of the GNU General Public
-License, version 3, can be found in `/usr/share/common-licenses/GPL-3'.
-
-The Debian packaging is (C) 2009, Romuald Conty and
-is licensed under the GPL, see `/usr/share/common-licenses/GPL'.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/debian/nfcutils.install new/nfcutils-0.3.2/debian/nfcutils.install
--- old/nfcutils/debian/nfcutils.install 2013-05-31 18:02:06.000000000 +0200
+++ new/nfcutils-0.3.2/debian/nfcutils.install 1970-01-01 01:00:00.000000000 +0100
@@ -1,2 +0,0 @@
-debian/tmp/usr/bin/lsnfc
-
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/debian/rules new/nfcutils-0.3.2/debian/rules
--- old/nfcutils/debian/rules 2013-05-31 18:02:06.000000000 +0200
+++ new/nfcutils-0.3.2/debian/rules 1970-01-01 01:00:00.000000000 +0100
@@ -1,117 +0,0 @@
-#!/usr/bin/make -f
-# -*- makefile -*-
-# Sample debian/rules that uses debhelper.
-# This file was originally written by Joey Hess and Craig Small.
-# As a special exception, when this file is copied by dh-make into a
-# dh-make output file, you may use that output file without restriction.
-# This special exception was added by Craig Small in version 0.37 of dh-make.
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-
-# These are used for cross-compiling and for saving the configure script
-# from having to guess our platform (since we know it already)
-DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE))
- CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
- CROSS_CFLAGS=-I/usr/$(DEB_HOST_GNU_TYPE)/include -I/usr/$(DEB_HOST_GNU_TYPE)/usr/include
- LDFLAGS=-L/usr/$(DEB_HOST_GNU_TYPE)/lib -L/usr/$(DEB_HOST_GNU_TYPE)/usr/lib
- MAKE_LDFLAGS=-inst-prefix-dir /usr/$(DEB_HOST_GNU_TYPE) -Wl,-rpath-link /usr/$(DEB_HOST_GNU_TYPE)/lib -Wl,-rpath-link /usr/$(DEB_HOST_GNU_TYPE)/usr/lib
- DH_STRIP=
- DH_SHLIBDEPS=
-else
- CROSS= --build $(DEB_BUILD_GNU_TYPE)
- DH_STRIP=dh_strip
- DH_SHLIBDEPS=dh_shlibdeps
-endif
-
-# shared library versions, option 1
-version=2.0.5
-major=2
-# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so
-#version=`ls src/.libs/lib*.so.* | \
-# awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'`
-#major=`ls src/.libs/lib*.so.* | \
-# awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'`
-
-config.status: configure
- dh_testdir
- # Add here commands to configure the package.
-ifneq "$(wildcard /usr/share/misc/config.sub)" ""
- cp -f /usr/share/misc/config.sub config.sub
-endif
-ifneq "$(wildcard /usr/share/misc/config.guess)" ""
- cp -f /usr/share/misc/config.guess config.guess
-endif
- ./configure $(CROSS) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info CFLAGS="$(CFLAGS) $(CROSS_CFLAGS)" LDFLAGS="-Wl,-z,defs $(LDFLAGS)"
-
-
-build: build-stamp
-build-stamp: config.status
- dh_testdir
-
- # Add here commands to compile the package.
- $(MAKE) LDFLAGS="$(MAKE_LDFLAGS) $(LDFLAGS)"
-
- touch $@
-
-clean:
- dh_testdir
- dh_testroot
- rm -f build-stamp
-
- # Add here commands to clean up after the build process.
- [ ! -f Makefile ] || $(MAKE) distclean
- rm -f config.sub config.guess
-
- dh_clean
-
-install: build
- dh_testdir
- dh_testroot
- dh_clean -k
- dh_installdirs
-
- # Add here commands to install the package into debian/tmp
- $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
-
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
- dh_testdir
- dh_testroot
- dh_installchangelogs ChangeLog
- dh_installdocs
- dh_installexamples
- dh_install
-# dh_installmenu
-# dh_installdebconf
-# dh_installlogrotate
-# dh_installemacsen
-# dh_installpam
-# dh_installmime
-# dh_installinit
-# dh_installcron
-# dh_installinfo
- dh_installman
- dh_link
- $(DH_STRIP)
- dh_compress
- dh_fixperms
-# dh_perl
-# dh_python
- dh_makeshlibs
- dh_installdeb
- $(DH_SHLIBDEPS)
- dh_gencontrol
- dh_md5sums
- dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/missing new/nfcutils-0.3.2/missing
--- old/nfcutils/missing 1970-01-01 01:00:00.000000000 +0100
+++ new/nfcutils-0.3.2/missing 2012-04-02 19:37:09.000000000 +0200
@@ -0,0 +1,331 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2012-01-06.13; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard , 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see http://www.gnu.org/licenses/.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to ."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/nfcutils/src/lsnfc.c new/nfcutils-0.3.2/src/lsnfc.c
--- old/nfcutils/src/lsnfc.c 2013-05-31 18:02:06.000000000 +0200
+++ new/nfcutils-0.3.2/src/lsnfc.c 2013-06-13 17:52:02.000000000 +0200
@@ -311,8 +311,7 @@
.nbr = NBR_106
};
if ((res = nfc_initiator_list_passive_targets(pnd, nm, ant, MAX_TARGET_COUNT)) >= 0) {
- size_t n;
- for (n = 0; n < res; n++) {
+ for (int n = 0; n < res; n++) {
print_iso14443a_name(ant[n].nti.nai);
}
device_tag_count += res;
@@ -320,8 +319,7 @@
nm.nmt = NMT_ISO14443B;
if ((res = nfc_initiator_list_passive_targets(pnd, nm, ant, MAX_TARGET_COUNT)) >= 0) {
- size_t n;
- for (n = 0; n < res; n++) {
+ for (int n = 0; n < res; n++) {
printf(" ISO14443B: ");
printf("PUPI: ");
print_hex(ant[n].nti.nbi.abtPupi, 4);
@@ -340,8 +338,7 @@
nm.nbr = NBR_212;
// List Felica tags
if ((res = nfc_initiator_list_passive_targets(pnd, nm, ant, MAX_TARGET_COUNT)) >= 0) {
- int n;
- for (n = 0; n < res; n++) {
+ for (int n = 0; n < res; n++) {
print_nfc_felica_info(ant[n].nti.nfi);
printf("\n");
}
@@ -350,8 +347,7 @@
nm.nbr = NBR_424;
if ((res = nfc_initiator_list_passive_targets(pnd, nm, ant, MAX_TARGET_COUNT)) >= 0) {
- int n;
- for (n = 0; n < res; n++) {
+ for (int n = 0; n < res; n++) {
print_nfc_felica_info(ant[n].nti.nfi);
printf("\n");
}
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org