Hello community,
here is the log from the commit of package yast2-live-installer for openSUSE:Factory
checked in at Fri Oct 30 17:38:50 CET 2009.
--------
--- yast2-live-installer/yast2-live-installer.changes 2009-09-09 15:39:51.000000000 +0200
+++ /mounts/work_src_done/STABLE/yast2-live-installer/yast2-live-installer.changes 2009-10-30 13:55:38.000000000 +0100
@@ -1,0 +2,6 @@
+Fri Oct 30 13:46:38 CET 2009 - jsrain@suse.cz
+
+- call correct_live_for_reboot script before reboot (bnc#550874)
+- 2.18.8
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
Old:
----
yast2-live-installer-2.18.7.tar.bz2
New:
----
yast2-live-installer-2.18.8.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-live-installer.spec ++++++
--- /var/tmp/diff_new_pack.5RVB5T/_old 2009-10-30 17:38:13.000000000 +0100
+++ /var/tmp/diff_new_pack.5RVB5T/_new 2009-10-30 17:38:13.000000000 +0100
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-live-installer (Version 2.18.7)
+# spec file for package yast2-live-installer (Version 2.18.8)
#
# Copyright (c) 2009 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
@@ -19,10 +19,10 @@
Name: yast2-live-installer
-Version: 2.18.7
+Version: 2.18.8
Release: 1
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-live-installer-2.18.7.tar.bz2
+Source0: yast2-live-installer-2.18.8.tar.bz2
Prefix: /usr
Group: System/YaST
License: GPL v2 or later
@@ -42,7 +42,7 @@
hard disk of the computer.
%prep
-%setup -n yast2-live-installer-2.18.7
+%setup -n yast2-live-installer-2.18.8
%build
%{prefix}/bin/y2tool y2autoconf
++++++ yast2-live-installer-2.18.7.tar.bz2 -> yast2-live-installer-2.18.8.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.7/VERSION new/yast2-live-installer-2.18.8/VERSION
--- old/yast2-live-installer-2.18.7/VERSION 2009-09-09 14:54:40.000000000 +0200
+++ new/yast2-live-installer-2.18.8/VERSION 2009-10-30 13:52:37.000000000 +0100
@@ -1 +1 @@
-2.18.7
+2.18.8
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.7/configure new/yast2-live-installer-2.18.8/configure
--- old/yast2-live-installer-2.18.7/configure 2009-09-09 15:05:27.000000000 +0200
+++ new/yast2-live-installer-2.18.8/configure 2009-10-30 13:53:15.000000000 +0100
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for yast2-live-installer 2.18.7.
+# Generated by GNU Autoconf 2.63 for yast2-live-installer 2.18.8.
#
# Report bugs to http://bugs.opensuse.org/.
#
@@ -596,8 +596,8 @@
# Identity of this package.
PACKAGE_NAME='yast2-live-installer'
PACKAGE_TARNAME='yast2-live-installer'
-PACKAGE_VERSION='2.18.7'
-PACKAGE_STRING='yast2-live-installer 2.18.7'
+PACKAGE_VERSION='2.18.8'
+PACKAGE_STRING='yast2-live-installer 2.18.8'
PACKAGE_BUGREPORT='http://bugs.opensuse.org/'
ac_unique_file="RPMNAME"
@@ -1276,7 +1276,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures yast2-live-installer 2.18.7 to adapt to many kinds of systems.
+\`configure' configures yast2-live-installer 2.18.8 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1348,7 +1348,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of yast2-live-installer 2.18.7:";;
+ short | recursive ) echo "Configuration of yast2-live-installer 2.18.8:";;
esac
cat <<\_ACEOF
@@ -1428,7 +1428,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-yast2-live-installer configure 2.18.7
+yast2-live-installer configure 2.18.8
generated by GNU Autoconf 2.63
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1442,7 +1442,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by yast2-live-installer $as_me 2.18.7, which was
+It was created by yast2-live-installer $as_me 2.18.8, which was
generated by GNU Autoconf 2.63. Invocation command line was
$ $0 $@
@@ -2289,7 +2289,7 @@
# Define the identity of the package.
PACKAGE='yast2-live-installer'
- VERSION='2.18.7'
+ VERSION='2.18.8'
cat >>confdefs.h <<_ACEOF
@@ -2513,7 +2513,7 @@
-VERSION="2.18.7"
+VERSION="2.18.8"
RPMNAME="yast2-live-installer"
MAINTAINER="Jiri Srain "
@@ -3547,7 +3547,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by yast2-live-installer $as_me 2.18.7, which was
+This file was extended by yast2-live-installer $as_me 2.18.8, which was
generated by GNU Autoconf 2.63. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -3597,7 +3597,7 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
-yast2-live-installer config.status 2.18.7
+yast2-live-installer config.status 2.18.8
configured by $0, generated by GNU Autoconf 2.63,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.7/configure.in new/yast2-live-installer-2.18.8/configure.in
--- old/yast2-live-installer-2.18.7/configure.in 2009-09-09 15:05:24.000000000 +0200
+++ new/yast2-live-installer-2.18.8/configure.in 2009-10-30 13:53:10.000000000 +0100
@@ -3,7 +3,7 @@
dnl -- This file is generated by y2autoconf 2.18.10 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-live-installer, 2.18.7, http://bugs.opensuse.org/, yast2-live-installer)
+AC_INIT(yast2-live-installer, 2.18.8, http://bugs.opensuse.org/, yast2-live-installer)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -18,7 +18,7 @@
AM_INIT_AUTOMAKE(tar-ustar -Wno-portability)
dnl Important YaST2 variables
-VERSION="2.18.7"
+VERSION="2.18.8"
RPMNAME="yast2-live-installer"
MAINTAINER="Jiri Srain "
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.7/live-installer.pot new/yast2-live-installer-2.18.8/live-installer.pot
--- old/yast2-live-installer-2.18.7/live-installer.pot 2009-08-06 09:24:38.000000000 +0200
+++ new/yast2-live-installer-2.18.8/live-installer.pot 1970-01-01 01:00:00.000000000 +0100
@@ -1,229 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR SuSE Linux Products GmbH, Nuernberg
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR , YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-06 09:24+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME \n"
-"Language-Team: LANGUAGE \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/inst_live_add_base_repo.ycp:25 src/inst_live_sw_select.ycp:16
-msgid "Software Installation"
-msgstr ""
-
-#: src/inst_live_doit.ycp:77 src/inst_live_doit.ycp:78
-#, ycp-format
-msgid "Copying %1..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:130 src/inst_live_doit.ycp:131
-msgid "Evaluating filesystems to copy..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:133 src/inst_live_doit.ycp:134
-msgid "Copying root filesystem..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:135
-msgid "Copying live image..."
-msgstr ""
-
-#: src/inst_live_prepareprogress.ycp:41
-msgid "Preparing disks..."
-msgstr ""
-
-#: src/inst_live_prepareprogress.ycp:47
-msgid "Copying Image..."
-msgstr ""
-
-#. dialog caption
-#: src/inst_live_simple_proposal.ycp:22 src/inst_live_simple_proposal.ycp:155
-msgid "Installation settings"
-msgstr ""
-
-#. label
-#: src/inst_live_simple_proposal.ycp:24
-msgid "Analyzing the system..."
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:84
-#, ycp-format
-msgid "Use %1%% of disk %2 for Linux"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:88
-#, ycp-format
-msgid "Do not use disk %1"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:92
-msgid "Partitioning"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:109
-msgid "System start-up"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:111
-msgid "Ask whether to boot Linux or existing system"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:112
-msgid "Boot only Linux"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:113
-#, ycp-format
-msgid "System start time-out: %1 seconds"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:119
-msgid "Keyboard"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:126
-msgid "Time Zone"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:136
-msgid "Change Installation Settings"
-msgstr ""
-
-#. help text 1/3
-#: src/inst_live_simple_proposal.ycp:141
-msgid ""
-"<p>\n"
-"Use <b>Accept</b> to perform a new installation with the values displayed.</p>"
-msgstr ""
-
-#. help text 2/3
-#: src/inst_live_simple_proposal.ycp:144
-msgid ""
-"<p>\n"
-"To change the values click the respective headline\n"
-"or select <b>Change Installation Settings</b></p>"
-msgstr ""
-
-#. help text 3/3
-#: src/inst_live_simple_proposal.ycp:148
-msgid ""
-"<p>\n"
-"Your hard disk has not been modified, you can still safely abort.\n"
-"</p>"
-msgstr ""
-
-#. help text 1/1
-#: src/inst_live_welcome.ycp:14
-msgid ""
-"<p>Welcome to the &product; installation.\n"
-"Press <b>Next</p> to run the installation wizard.</p>"
-msgstr ""
-
-#. dialog caption, %1 is product name (typically openSUSE)
-#: src/inst_live_welcome.ycp:19
-#, ycp-format
-msgid "Welcome to %1 installation"
-msgstr ""
-
-#. wellcome label, %1 is product name
-#: src/inst_live_welcome.ycp:21
-#, ycp-format
-msgid ""
-"Your %1 will be installed quickly\n"
-"and easily in a few steps.\n"
-"You will only have to answer some questions."
-msgstr ""
-
-#. TRANSLATORS: error message - the module does not provide command line interface
-#: src/live-installer.ycp:27
-msgid "There is no user interface available for this module."
-msgstr ""
-
-#. pop-up, %1 is memory size, currently hardcoded "1 GB"
-#: src/live-installer.ycp:40
-#, ycp-format
-msgid ""
-"Your computer has less than %1 of memory. This may not be\n"
-"sufficient for the live installation, especially when installing\n"
-"while running other applications.\n"
-"Before continuing, finish all running applications."
-msgstr ""
-
-#. continue/cancel pop-up
-#: src/live-installer.ycp:79
-msgid ""
-"YaST detected a mounted removable media. YaST cannot install\n"
-"the system on media which is mounted.\n"
-"To install the system on these media, unmount them first."
-msgstr ""
-
-#. continue-cancel popup
-#: src/live-installer.ycp:107
-msgid ""
-"openSUSE installer detected DMRAID array.\n"
-"It is not supported by the openSUSE live installer.\n"
-"Continuing the installation may cause data loss."
-msgstr ""
-
-#. popup dialog, text followed by 'Reboot Now' and 'Reboot Later' buttons
-#: src/live-installer.ycp:153
-msgid ""
-"The computer needs to be rebooted without the Live CD in the\n"
-"drive to finish the installation. Either YaST can reboot\n"
-"now or you can reboot any time later.\n"
-"\n"
-"Note that if the Live CD is not ejected, you can either eject\n"
-"it after the Live system shuts down or select \"Hard Disk\"\n"
-"in the boot menu of the Live CD."
-msgstr ""
-
-#. push button
-#: src/live-installer.ycp:161
-msgid "Reboot &Now"
-msgstr ""
-
-#: src/live-installer.ycp:161
-msgid "Reboot &Later"
-msgstr ""
-
-#. error report
-#: src/live-installer.ycp:176
-msgid ""
-"Failed to restart the computer.\n"
-"Reboot it manually. You may even need to push the\n"
-"'Reset' button to restart it."
-msgstr ""
-
-#. progress step title
-#: src/live_copy_files_finish.ycp:51
-msgid "Copying files to installed system..."
-msgstr ""
-
-#. progress step title
-#: src/live_runme_at_boot_finish.ycp:45
-msgid "Writing YaST Configuration..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:50
-msgid "Saving language..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:55
-msgid "Saving keyboard configuration..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:64
-msgid "Saving time zone..."
-msgstr ""
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.7/src/live_save_config_finish.ycp new/yast2-live-installer-2.18.8/src/live_save_config_finish.ycp
--- old/yast2-live-installer-2.18.7/src/live_save_config_finish.ycp 2009-08-10 11:14:27.000000000 +0200
+++ new/yast2-live-installer-2.18.8/src/live_save_config_finish.ycp 2009-10-30 13:52:37.000000000 +0100
@@ -21,6 +21,7 @@
import "Keyboard";
import "Installation";
import "Language";
+import "FileUtils";
any ret = nil;
string func = "";
@@ -60,6 +61,23 @@
Progress::Title (_("Saving time zone..."));
Timezone::Save();
+ // bnc#550874
+ // Call a script if it exists
+ string scriptname = "/usr/bin/correct_live_for_reboot";
+ if (FileUtils::Exists (scriptname)) {
+ y2milestone ("Calling %1 returned %2",
+ scriptname,
+ SCR::Execute (.target.bash_output, scriptname)
+ );
+ y2milestone ("Removing %1 returned %2",
+ scriptname,
+ SCR::Execute (.target.bash_output, sformat ("/bin/rm %1", scriptname))
+ );
+ } else {
+ y2milestone ("Script %1 doesn't exist, skipping...", scriptname);
+ }
+
+
}
else
{
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.7/yast2-live-installer-2.18.7/live-installer.pot new/yast2-live-installer-2.18.8/yast2-live-installer-2.18.7/live-installer.pot
--- old/yast2-live-installer-2.18.7/yast2-live-installer-2.18.7/live-installer.pot 2009-08-06 09:24:38.000000000 +0200
+++ new/yast2-live-installer-2.18.8/yast2-live-installer-2.18.7/live-installer.pot 1970-01-01 01:00:00.000000000 +0100
@@ -1,229 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR SuSE Linux Products GmbH, Nuernberg
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR , YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-06 09:24+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME \n"
-"Language-Team: LANGUAGE \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/inst_live_add_base_repo.ycp:25 src/inst_live_sw_select.ycp:16
-msgid "Software Installation"
-msgstr ""
-
-#: src/inst_live_doit.ycp:77 src/inst_live_doit.ycp:78
-#, ycp-format
-msgid "Copying %1..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:130 src/inst_live_doit.ycp:131
-msgid "Evaluating filesystems to copy..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:133 src/inst_live_doit.ycp:134
-msgid "Copying root filesystem..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:135
-msgid "Copying live image..."
-msgstr ""
-
-#: src/inst_live_prepareprogress.ycp:41
-msgid "Preparing disks..."
-msgstr ""
-
-#: src/inst_live_prepareprogress.ycp:47
-msgid "Copying Image..."
-msgstr ""
-
-#. dialog caption
-#: src/inst_live_simple_proposal.ycp:22 src/inst_live_simple_proposal.ycp:155
-msgid "Installation settings"
-msgstr ""
-
-#. label
-#: src/inst_live_simple_proposal.ycp:24
-msgid "Analyzing the system..."
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:84
-#, ycp-format
-msgid "Use %1%% of disk %2 for Linux"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:88
-#, ycp-format
-msgid "Do not use disk %1"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:92
-msgid "Partitioning"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:109
-msgid "System start-up"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:111
-msgid "Ask whether to boot Linux or existing system"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:112
-msgid "Boot only Linux"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:113
-#, ycp-format
-msgid "System start time-out: %1 seconds"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:119
-msgid "Keyboard"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:126
-msgid "Time Zone"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:136
-msgid "Change Installation Settings"
-msgstr ""
-
-#. help text 1/3
-#: src/inst_live_simple_proposal.ycp:141
-msgid ""
-"<p>\n"
-"Use <b>Accept</b> to perform a new installation with the values displayed.</p>"
-msgstr ""
-
-#. help text 2/3
-#: src/inst_live_simple_proposal.ycp:144
-msgid ""
-"<p>\n"
-"To change the values click the respective headline\n"
-"or select <b>Change Installation Settings</b></p>"
-msgstr ""
-
-#. help text 3/3
-#: src/inst_live_simple_proposal.ycp:148
-msgid ""
-"<p>\n"
-"Your hard disk has not been modified, you can still safely abort.\n"
-"</p>"
-msgstr ""
-
-#. help text 1/1
-#: src/inst_live_welcome.ycp:14
-msgid ""
-"<p>Welcome to the &product; installation.\n"
-"Press <b>Next</p> to run the installation wizard.</p>"
-msgstr ""
-
-#. dialog caption, %1 is product name (typically openSUSE)
-#: src/inst_live_welcome.ycp:19
-#, ycp-format
-msgid "Welcome to %1 installation"
-msgstr ""
-
-#. wellcome label, %1 is product name
-#: src/inst_live_welcome.ycp:21
-#, ycp-format
-msgid ""
-"Your %1 will be installed quickly\n"
-"and easily in a few steps.\n"
-"You will only have to answer some questions."
-msgstr ""
-
-#. TRANSLATORS: error message - the module does not provide command line interface
-#: src/live-installer.ycp:27
-msgid "There is no user interface available for this module."
-msgstr ""
-
-#. pop-up, %1 is memory size, currently hardcoded "1 GB"
-#: src/live-installer.ycp:40
-#, ycp-format
-msgid ""
-"Your computer has less than %1 of memory. This may not be\n"
-"sufficient for the live installation, especially when installing\n"
-"while running other applications.\n"
-"Before continuing, finish all running applications."
-msgstr ""
-
-#. continue/cancel pop-up
-#: src/live-installer.ycp:79
-msgid ""
-"YaST detected a mounted removable media. YaST cannot install\n"
-"the system on media which is mounted.\n"
-"To install the system on these media, unmount them first."
-msgstr ""
-
-#. continue-cancel popup
-#: src/live-installer.ycp:107
-msgid ""
-"openSUSE installer detected DMRAID array.\n"
-"It is not supported by the openSUSE live installer.\n"
-"Continuing the installation may cause data loss."
-msgstr ""
-
-#. popup dialog, text followed by 'Reboot Now' and 'Reboot Later' buttons
-#: src/live-installer.ycp:153
-msgid ""
-"The computer needs to be rebooted without the Live CD in the\n"
-"drive to finish the installation. Either YaST can reboot\n"
-"now or you can reboot any time later.\n"
-"\n"
-"Note that if the Live CD is not ejected, you can either eject\n"
-"it after the Live system shuts down or select \"Hard Disk\"\n"
-"in the boot menu of the Live CD."
-msgstr ""
-
-#. push button
-#: src/live-installer.ycp:161
-msgid "Reboot &Now"
-msgstr ""
-
-#: src/live-installer.ycp:161
-msgid "Reboot &Later"
-msgstr ""
-
-#. error report
-#: src/live-installer.ycp:176
-msgid ""
-"Failed to restart the computer.\n"
-"Reboot it manually. You may even need to push the\n"
-"'Reset' button to restart it."
-msgstr ""
-
-#. progress step title
-#: src/live_copy_files_finish.ycp:51
-msgid "Copying files to installed system..."
-msgstr ""
-
-#. progress step title
-#: src/live_runme_at_boot_finish.ycp:45
-msgid "Writing YaST Configuration..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:50
-msgid "Saving language..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:55
-msgid "Saving keyboard configuration..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:64
-msgid "Saving time zone..."
-msgstr ""
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org