December 2008 - openSUSE Commits - openSUSE Mailing Lists

commit rpcbind
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package rpcbind checked in at Mon Dec 1 18:07:53 CET 2008. -------- --- rpcbind/rpcbind.changes 2008-11-26 14:19:26.000000000 +0100 +++ /mounts/work_src_done/STABLE/rpcbind/rpcbind.changes 2008-12-01 12:58:15.000000000 +0100 @@ -1,0 +2,10 @@ +Mon Dec 1 12:29:50 CET 2008 - mkoenig(a)suse.de + +- if upgrading from portmap: + * we need to stop portmap and start rpcbind in %post since the + restart on upgrade mechanism does not work here + * dump portmap tables and set them again in rpcbind [bnc#446388] +- add pmap_set.c which is needed to set the old portmap tables + in rpcbind + +------------------------------------------------------------------- calling whatdependson for head-i586 New: ---- pmap_set.c ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ rpcbind.spec ++++++ --- /var/tmp/diff_new_pack.ix1897/_old 2008-12-01 18:05:33.000000000 +0100 +++ /var/tmp/diff_new_pack.ix1897/_new 2008-12-01 18:05:33.000000000 +0100 @@ -24,17 +24,19 @@ Group: Productivity/Networking/System AutoReqProv: on Version: 0.1.6+git20080930 -Release: 3 +Release: 4 Summary: Transport independent RPC portmapper Url: http://nfsv4.bullopensource.org/doc/tirpc_rpcbind.php Source: %{name}-%{version}.tar.bz2 Source1: rpcbind.init Source2: sysconfig.rpcbind Source3: rpcbind.xml +Source4: pmap_set.c BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: portmap = 6.0+git20070716 Obsoletes: portmap <= 6.0+git20070716 PreReq: %insserv_prereq %fillup_prereq +%define statefile /var/lib/portmap.state %description Rpcbind is a replacement for portmap. Whereas portmap supports only UDP @@ -52,6 +54,7 @@ %prep %setup +cp %{SOURCE4} . %build autoreconf -fi @@ -66,6 +69,7 @@ CFLAGS="$RPM_OPT_FLAGS -fpie" \ LDFLAGS="-pie" make +gcc -o pmap_set $RPM_OPT_FLAGS pmap_set.c %install make install DESTDIR=$RPM_BUILD_ROOT @@ -80,12 +84,20 @@ install -m 644 %{SOURCE2} $RPM_BUILD_ROOT/var/adm/fillup-templates/ mkdir -p $RPM_BUILD_ROOT%_datadir/omc/svcinfo.d install -m 644 %{SOURCE3} $RPM_BUILD_ROOT%_datadir/omc/svcinfo.d/ +# +install -m 755 pmap_set $RPM_BUILD_ROOT/sbin/pmap_set %clean rm -rf $RPM_BUILD_ROOT %pre # upgrade case from portmap +# 1. if portmap is running, dump portmap tables +if checkproc /sbin/portmap; then + rm -f %statefile + test -x /sbin/pmap_dump && /sbin/pmap_dump > %statefile +fi +# 2. disable portmap service to be able to enable rpcbind if test -x /sbin/portmap && chkconfig -c portmap 3; then /sbin/insserv -f -r portmap fi @@ -95,6 +107,14 @@ %post %fillup_and_insserv -y rpcbind +# if portmap is running, we need to stop portmap *now*, +# start rpcbind and restore the old tables +if test -r %statefile; then + /etc/init.d/portmap stop > /dev/null || : + /etc/init.d/rpcbind start > /dev/null || : + /sbin/pmap_set < %statefile + rm -f %statefile +fi %postun %restart_on_update rpcbind @@ -103,6 +123,7 @@ %files %defattr(-,root,root) %doc AUTHORS ChangeLog COPYING NEWS README +/sbin/pmap_set /sbin/rpcbind /sbin/rpcinfo %doc %{_mandir}/*/* @@ -113,6 +134,13 @@ %{_datadir}/omc/svcinfo.d/rpcbind.xml %changelog +* Mon Dec 01 2008 mkoenig(a)suse.de +- if upgrading from portmap: + * we need to stop portmap and start rpcbind in %%post since the + restart on upgrade mechanism does not work here + * dump portmap tables and set them again in rpcbind [bnc#446388] +- add pmap_set.c which is needed to set the old portmap tables + in rpcbind * Wed Nov 26 2008 mkoenig(a)suse.de - specify runlevel in chkconfig check [bnc#444663] * Wed Nov 05 2008 mkoenig(a)suse.de ++++++ pmap_set.c ++++++ /* * pmap_set - set portmapper table from data produced by pmap_dump * * Author: Wietse Venema (wietse(a)wzv.win.tue.nl), dept. of Mathematics and * Computing Science, Eindhoven University of Technology, The Netherlands. */ #include <stdio.h> #include <sys/types.h> #ifdef SYSV40 #include <netinet/in.h> #endif #include <rpc/rpc.h> #include <rpc/pmap_clnt.h> static int parse_line(char *buf, u_long *prog, u_long *vers, int *prot, unsigned *port); int main(int argc, char **argv) { char buf[BUFSIZ]; u_long prog; u_long vers; int prot; unsigned port; while (fgets(buf, sizeof(buf), stdin)) { if (parse_line(buf, &prog, &vers, &prot, &port) == 0) { fprintf(stderr, "%s: malformed line: %s", argv[0], buf); return (1); } if (pmap_set(prog, vers, prot, (unsigned short) port) == 0) fprintf(stderr, "not registered: %s", buf); } return (0); } /* parse_line - convert line to numbers */ static int parse_line(char *buf, u_long *prog, u_long *vers, int *prot, unsigned *port) { char proto_name[256]; if (sscanf(buf, "%lu %lu %255s %u", prog, vers, proto_name, port) != 4) { return (0); } if (strcmp(proto_name, "tcp") == 0) { *prot = IPPROTO_TCP; return (1); } if (strcmp(proto_name, "udp") == 0) { *prot = IPPROTO_UDP; return (1); } if (sscanf(proto_name, "%d", prot) == 1) { return (1); } return (0); } ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit pmtools
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package pmtools checked in at Mon Dec 1 18:05:47 CET 2008. -------- --- arch/i386/pmtools/pmtools.changes 2008-08-05 11:33:54.000000000 +0200 +++ /mounts/work_src_done/STABLE/pmtools/pmtools.changes 2008-12-01 11:56:01.989630000 +0100 @@ -1,0 +2,8 @@ +Mon Dec 1 11:51:18 CET 2008 - trenn(a)suse.de + +- Updated acpica-unix to 20081031 + -> -e enhancements for the disassembler + Disassembling SSDT with crossreferences to the DSDT should work + now with iasl -e DSDT.dat SSDT.dat + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- acpica-unix-20080729.tar.bz2 New: ---- acpica-unix-20081031.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ pmtools.spec ++++++ --- /var/tmp/diff_new_pack.uP1554/_old 2008-12-01 18:05:28.000000000 +0100 +++ /var/tmp/diff_new_pack.uP1554/_new 2008-12-01 18:05:28.000000000 +0100 @@ -19,10 +19,10 @@ Name: pmtools -Url: http://www.intel.com/technology/iapc/acpi/downloads.htm +Url: http://acpica.org/downloads Version: 20071116 -Release: 31 -%define acpica acpica-unix-20080729 +Release: 44 +%define acpica acpica-unix-20081031 License: GPL v2 or later Group: Development/Tools/Other AutoReqProv: on @@ -98,6 +98,11 @@ /%{_mandir}/man8/* %changelog +* Mon Dec 01 2008 trenn(a)suse.de +- Updated acpica-unix to 20081031 + -> -e enhancements for the disassembler + Disassembling SSDT with crossreferences to the DSDT should work + now with iasl -e DSDT.dat SSDT.dat * Tue Aug 05 2008 trenn(a)suse.de - Update acpica-unix to 20080729 - Fix download URL in spec file, moved to acpica.org ++++++ acpica-unix-20080729.tar.bz2 -> acpica-unix-20081031.tar.bz2 ++++++ ++++ 13814 lines of diff (skipped) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit petitboot
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package petitboot checked in at Mon Dec 1 18:05:24 CET 2008. -------- --- arch/ppc/petitboot/petitboot.changes 2008-09-30 11:43:37.000000000 +0200 +++ /mounts/work_src_done/STABLE/petitboot/petitboot.changes 2008-12-01 17:02:58.477668000 +0100 @@ -1,0 +2,6 @@ +Mon Dec 1 17:02:30 CET 2008 - ro(a)suse.de + +- reduce ExclusiveArch to ppc + (no ppc64 since there is no kernel-ps3 there) + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ petitboot.spec ++++++ --- /var/tmp/diff_new_pack.K31868/_old 2008-12-01 18:04:34.000000000 +0100 +++ /var/tmp/diff_new_pack.K31868/_new 2008-12-01 18:04:34.000000000 +0100 @@ -20,7 +20,7 @@ Name: petitboot Version: 1.0rc2 -Release: 2 +Release: 3 Url: http://ozlabs.org/~jk/projects/petitboot/ Summary: Petitboot is a graphical bootloader for the PlayStation 3 License: GPL v2 only @@ -35,7 +35,7 @@ Patch2: petitboot-multiple-font-sizes.patch Patch3: petitboot-reorder-devices.patch Group: System/Boot -ExclusiveArch: ppc ppc64 +ExclusiveArch: ppc %description Petitboot is a graphical bootloader for the PlayStation 3. It's based @@ -104,6 +104,9 @@ /usr/share/ps3/otheros.bld %changelog +* Mon Dec 01 2008 ro(a)suse.de +- reduce ExclusiveArch to ppc + (no ppc64 since there is no kernel-ps3 there) * Tue Sep 30 2008 sassmann(a)suse.de - added BuildRequires for ncurses-devel * Mon Sep 01 2008 sassmann(a)suse.de ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit pdns
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package pdns checked in at Mon Dec 1 18:05:19 CET 2008. -------- --- pdns/pdns.changes 2008-11-06 15:59:03.000000000 +0100 +++ /mounts/work_src_done/STABLE/pdns/pdns.changes 2008-11-20 17:34:59.319096000 +0100 @@ -1,0 +2,12 @@ +Tue Nov 18 20:29:21 CET 2008 - mrueckert(a)suse.de + +- update to version 2.9.21.2: (bnc#445568) + do not crash with HINFO CHAOS requests when configured with + 'distributor-threads=1' +- make default config more sane +- remove guardian commandline parameter. it was hiding the startup + errors. If you want to use the guardian reenable it in the + configuration file. +- mark init script as config + +------------------------------------------------------------------- @@ -15,2 +27,2 @@ -- replaced conditional on %{opensuse_bs} with: - %if %(echo "%distribution" | grep -Ec '^server:dns') +- replaced conditional on #{opensuse_bs} with: + #if #(echo "%distribution" | grep -Ec '^server:dns') calling whatdependson for head-i586 Old: ---- pdns-2.9.21.1.tar.bz2 New: ---- pdns-2.9.21.2_fix_default_config.patch pdns-2.9.21.2.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ pdns.spec ++++++ --- /var/tmp/diff_new_pack.E31710/_old 2008-12-01 18:04:32.000000000 +0100 +++ /var/tmp/diff_new_pack.E31710/_new 2008-12-01 18:04:32.000000000 +0100 @@ -1,5 +1,5 @@ # -# spec file for package pdns (Version 2.9.21.1) +# spec file for package pdns (Version 2.9.21.2) # # Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -19,8 +19,8 @@ Name: pdns -Version: 2.9.21.1 -Release: 3 +Version: 2.9.21.2 +Release: 1 # Group: Productivity/Networking/DNS/Servers License: GPL v2 or later @@ -64,10 +64,11 @@ Source: %{name}-%{version}.tar.bz2 Source1: rcpdns Source2: README.opendbx -Patch1: pdns-%{version}_unversioned_modules.patch -Patch2: pdns-%{version}_gcc43.patch -Patch3: pdns-%{version}-wrong-pgsql.patch +Patch1: pdns-2.9.21.1_unversioned_modules.patch +Patch2: pdns-2.9.21.1_gcc43.patch +Patch3: pdns-2.9.21.1-wrong-pgsql.patch Patch4: pdns-2.9.21.1_new_boost_exceptions.patch +Patch5: pdns-2.9.21.2_fix_default_config.patch # Summary: Modern, advanced and high performance authoritative-only nameserver @@ -262,10 +263,15 @@ %patch2 %patch3 %patch4 +%patch5 %if 0%{?with_opendbx} %{__cp} %{S:2} README.opendbx %endif %{__cp} modules/geobackend/README README.geobackend +# module-dir=/usr/local/lib +perl -p -i.back -e 's|module-dir=.*|module-dir=%{_libdir}/%{pkg_name}|g' pdns/pdns.conf-dist +diff -urN pdns/pdns.conf-dist{.back,} ||: +rm -v pdns/pdns.conf-dist.back %build touch NEWS AUTHORS COPYING @@ -355,7 +361,7 @@ %defattr (-,root,root,-) %doc ChangeLog HACKING INSTALL README* TODO %doc pdns/docs/html -/etc/init.d/%{pkg_name} +%config(noreplace) /etc/init.d/%{pkg_name} %dir %attr(750,root,pdns) %{_sysconfdir}/%{pkg_name} %config(noreplace) %attr(640,root,pdns) %{_sysconfdir}/%{pkg_name}/%{pkg_name}.conf %{_bindir}/pdns_control @@ -417,14 +423,23 @@ %endif %changelog +* Tue Nov 18 2008 mrueckert(a)suse.de +- update to version 2.9.21.2: (bnc#445568) + do not crash with HINFO CHAOS requests when configured with + 'distributor-threads=1' +- make default config more sane +- remove guardian commandline parameter. it was hiding the startup + errors. If you want to use the guardian reenable it in the + configuration file. +- mark init script as config * Thu Nov 06 2008 mrueckert(a)suse.de - added pdns-2.9.21.1_new_boost_exceptions.patch: clearify the referenced exception class * Fri Oct 17 2008 ro(a)suse.de - last change does not work yet, disable forcefully * Thu Aug 21 2008 mrueckert(a)suse.de -- replaced conditional on %%{opensuse_bs} with: - %%if %%(echo "%%distribution" | grep -Ec '^server:dns') +- replaced conditional on #{opensuse_bs} with: + [#]if #(echo "%%distribution" | grep -Ec '^server:dns') * Mon Aug 11 2008 anosek(a)suse.cz - updated to version 2.9.21.1 - fixes security issue CVE-2008-3337 (bnc#415369) ++++++ pdns-2.9.21.2_fix_default_config.patch ++++++ Index: pdns/pdns.conf-dist =================================================================== --- pdns/pdns.conf-dist.orig 2008-11-20 16:59:10.237018967 +0100 +++ pdns/pdns.conf-dist 2008-11-20 17:00:19.229014710 +0100 @@ -27,7 +27,7 @@ ################################# # config-dir Location of configuration directory (pdns.conf) # -# config-dir=/usr/local/etc +# config-dir=/etc/pdns ################################# # config-name Name of this virtual configuration - will rename the binary image ++++++ pdns-2.9.21.1.tar.bz2 -> pdns-2.9.21.2.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/pdns-2.9.21.1/codedocs/Makefile new/pdns-2.9.21.2/codedocs/Makefile --- old/pdns-2.9.21.1/codedocs/Makefile 2008-08-07 09:05:01.000000000 +0200 +++ new/pdns-2.9.21.2/codedocs/Makefile 2008-11-16 15:05:06.000000000 +0100 @@ -47,16 +47,16 @@ SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /home/ahu/download/pdns-2.9.21.1/missing --run aclocal-1.9 +ACLOCAL = ${SHELL} /home/ahu/download/pdns-2.9.21.2/missing --run aclocal-1.9 ALLSTATIC_FALSE = ALLSTATIC_TRUE = # AMDEP_FALSE = # AMDEP_TRUE = -AMTAR = ${SHELL} /home/ahu/download/pdns-2.9.21.1/missing --run tar +AMTAR = ${SHELL} /home/ahu/download/pdns-2.9.21.2/missing --run tar AR = ar -AUTOCONF = ${SHELL} /home/ahu/download/pdns-2.9.21.1/missing --run autoconf -AUTOHEADER = ${SHELL} /home/ahu/download/pdns-2.9.21.1/missing --run autoheader -AUTOMAKE = ${SHELL} /home/ahu/download/pdns-2.9.21.1/missing --run automake-1.9 +AUTOCONF = ${SHELL} /home/ahu/download/pdns-2.9.21.2/missing --run autoconf +AUTOHEADER = ${SHELL} /home/ahu/download/pdns-2.9.21.2/missing --run autoheader +AUTOMAKE = ${SHELL} /home/ahu/download/pdns-2.9.21.2/missing --run automake-1.9 AWK = gawk CC = gcc CCDEPMODE = depmode=gcc3 @@ -95,7 +95,7 @@ LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s LTLIBOBJS = -MAKEINFO = ${SHELL} /home/ahu/download/pdns-2.9.21.1/missing --run makeinfo +MAKEINFO = ${SHELL} /home/ahu/download/pdns-2.9.21.2/missing --run makeinfo MYSQL_incdir = /usr/include/mysql MYSQL_lib = NEDMALLOC_FALSE = @@ -123,7 +123,7 @@ SQLITE_lib = STRIP = strip THREADFLAGS = -pthread -VERSION = 2.9.21.1 +VERSION = 2.9.21.2 YACC = bison -y YFLAGS = ac_ct_CC = gcc @@ -157,7 +157,7 @@ htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info -install_sh = /home/ahu/download/pdns-2.9.21.1/install-sh +install_sh = /home/ahu/download/pdns-2.9.21.2/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/pdns-2.9.21.1/configure new/pdns-2.9.21.2/configure --- old/pdns-2.9.21.1/configure 2008-08-07 08:54:45.000000000 +0200 +++ new/pdns-2.9.21.2/configure 2008-11-16 15:05:06.000000000 +0100 @@ -2294,7 +2294,7 @@ # Define the identity of the package. PACKAGE=pdns - VERSION=2.9.21.1 + VERSION=2.9.21.2 cat >>confdefs.h <<_ACEOF diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/pdns-2.9.21.1/configure.in new/pdns-2.9.21.2/configure.in --- old/pdns-2.9.21.1/configure.in 2008-08-07 08:48:17.000000000 +0200 +++ new/pdns-2.9.21.2/configure.in 2008-11-16 15:05:06.000000000 +0100 @@ -1,6 +1,6 @@ dnl intro AC_INIT(pdns/receiver.cc) -AM_INIT_AUTOMAKE(pdns, 2.9.21.1) +AM_INIT_AUTOMAKE(pdns, 2.9.21.2) AC_CANONICAL_HOST AM_CONFIG_HEADER(config.h) AC_C_BIGENDIAN diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/pdns-2.9.21.1/debian-pdns/changelog new/pdns-2.9.21.2/debian-pdns/changelog --- old/pdns-2.9.21.1/debian-pdns/changelog 2008-08-07 08:48:55.000000000 +0200 +++ new/pdns-2.9.21.2/debian-pdns/changelog 2008-11-16 15:05:06.000000000 +0100 @@ -1,4 +1,4 @@ -pdns (2.9.21.1-1) unstable; urgency=medium +pdns (2.9.21.2-1) unstable; urgency=medium * fill in the blanks diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/pdns-2.9.21.1/pdns/packethandler.cc new/pdns-2.9.21.2/pdns/packethandler.cc --- old/pdns-2.9.21.1/pdns/packethandler.cc 2008-08-07 08:52:33.000000000 +0200 +++ new/pdns-2.9.21.2/pdns/packethandler.cc 2008-11-16 15:05:06.000000000 +0100 @@ -188,23 +188,6 @@ return 0; } -int PacketHandler::doDNSCheckRequest(DNSPacket *p, DNSPacket *r, string &target) -{ - int result = 0; - DNSResourceRecord rr; - - if (p->qclass == 3 && p->qtype.getName() == "HINFO") { - rr.content = "PowerDNS $Id: packethandler.cc 1036 2007-04-19 20:43:14Z ahu $"; - rr.ttl = 5; - rr.qname=target; - rr.qtype=13; // hinfo - r->addRecord(rr); - result = 1; - } - - return result; -} - /** This catches version requests. Returns 1 if it was handled, 0 if it wasn't */ int PacketHandler::doVersionRequest(DNSPacket *p, DNSPacket *r, string &target) { @@ -619,9 +602,6 @@ string target=p->qdomain; bool noCache=false; - if (doDNSCheckRequest(p, r, target)) - goto sendit; - if(doVersionRequest(p,r,target)) // catch version.bind requests goto sendit; diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/pdns-2.9.21.1/pdns/packethandler.hh new/pdns-2.9.21.2/pdns/packethandler.hh --- old/pdns-2.9.21.1/pdns/packethandler.hh 2007-04-21 15:56:36.000000000 +0200 +++ new/pdns-2.9.21.2/pdns/packethandler.hh 2008-11-16 15:05:06.000000000 +0100 @@ -88,7 +88,6 @@ int findMboxFW(DNSPacket *p, DNSPacket *r, string &target); int findUrl(DNSPacket *p, DNSPacket *r, string &target); int doFancyRecords(DNSPacket *p, DNSPacket *r, string &target); - int doDNSCheckRequest(DNSPacket *p, DNSPacket *r, string &target); int doVersionRequest(DNSPacket *p, DNSPacket *r, string &target); bool getAuth(DNSPacket *p, SOAData *sd, const string &target, int *zoneId); bool getTLDAuth(DNSPacket *p, SOAData *sd, const string &target, int *zoneId); diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/pdns-2.9.21.1/pdns.spec new/pdns-2.9.21.2/pdns.spec --- old/pdns-2.9.21.1/pdns.spec 2008-08-07 08:48:22.000000000 +0200 +++ new/pdns-2.9.21.2/pdns.spec 2008-11-16 15:05:06.000000000 +0100 @@ -1,6 +1,6 @@ Buildroot: /tmp/pdns Name: pdns-static -Version: 2.9.21.1 +Version: 2.9.21.2 Release: 1 Summary: extremely powerful and versatile nameserver License: GPL ++++++ rcpdns ++++++ --- /var/tmp/diff_new_pack.E31710/_old 2008-12-01 18:04:33.000000000 +0100 +++ /var/tmp/diff_new_pack.E31710/_new 2008-12-01 18:04:33.000000000 +0100 @@ -9,27 +9,27 @@ # and its symbolic link # /(usr/)sbin/rcpdns # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # # Template system startup script for some example service/daemon FOO # # LSB compatible service control script; see http://www.linuxbase.org/spec/ -# +# # Note: This template uses functions rc_XXX defined in /etc/rc.status on -# UnitedLinux (UL) based Linux distributions. If you want to base your -# script on this template and ensure that it works on non UL based LSB +# UnitedLinux (UL) based Linux distributions. If you want to base your +# script on this template and ensure that it works on non UL based LSB # compliant Linux distributions, you either have to provide the rc.status # functions from UL or change the script to work without them. # @@ -44,10 +44,10 @@ # Short-Description: PDNS is a versatile high performance authoritative nameserver # Description: PDNS is a versatile high performance authoritative nameserver ### END INIT INFO -# -# Any extensions to the keywords given above should be preceeded by +# +# Any extensions to the keywords given above should be preceeded by # X-VendorTag- (X-UnitedLinux- X-SuSE- for us) according to LSB. -# +# # Notes on Required-Start/Should-Start: # * There are two different issues that are solved by Required-Start # and Should-Start @@ -65,31 +65,31 @@ # in parallel). The tag Should-Start: is used for this. # It tells, that if a service is available, it should be started # before. If not, never mind. -# * When specifying hard dependencies or ordering requirements, you can +# * When specifying hard dependencies or ordering requirements, you can # use names of services (contents of their Provides: section) # or pseudo names starting with a $. The following ones are available # according to LSB (1.1): -# $local_fs all local file systems are mounted -# (most services should need this!) -# $remote_fs all remote file systems are mounted -# (note that /usr may be remote, so -# many services should Require this!) -# $syslog system logging facility up -# $network low level networking (eth card, ...) -# $named hostname resolution available -# $netdaemons all network daemons are running +# $local_fs all local file systems are mounted +# (most services should need this!) +# $remote_fs all remote file systems are mounted +# (note that /usr may be remote, so +# many services should Require this!) +# $syslog system logging facility up +# $network low level networking (eth card, ...) +# $named hostname resolution available +# $netdaemons all network daemons are running # The $netdaemons pseudo service has been removed in LSB 1.2. # For now, we still offer it for backward compatibility. # These are new (LSB 1.2): -# $time the system time has been set correctly -# $portmap SunRPC portmapping service available +# $time the system time has been set correctly +# $portmap SunRPC portmapping service available # UnitedLinux extensions: -# $ALL indicates that a script should be inserted -# at the end -# * The services specified in the stop tags +# $ALL indicates that a script should be inserted +# at the end +# * The services specified in the stop tags # (Required-Stop/Should-Stop) # specify which services need to be still running when this service -# is shut down. Often the entries there are just copies or a subset +# is shut down. Often the entries there are just copies or a subset # from the respective start tag. # * Should-Start/Stop are now part of LSB as of 2.0, # formerly SUSE/Unitedlinux used X-UnitedLinux-Should-Start/-Stop. @@ -100,10 +100,10 @@ # It's not used by insserv. # # Note on runlevels: -# 0 - halt/poweroff 6 - reboot -# 1 - single user 2 - multiuser without network exported +# 0 - halt/poweroff 6 - reboot +# 1 - single user 2 - multiuser without network exported # 3 - multiuser w/ network (text mode) 5 - multiuser w/ network and X11 (xdm) -# +# # Note on script names: # http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html # A registry has been set up to manage the init script namespace. @@ -115,9 +115,9 @@ # Check for missing binaries (stale symlinks should not happen) # Note: Special treatment of stop for LSB conformance PDNS_SERVER=/usr/sbin/pdns_server -test -x $PDNS_SERVER || { echo "$PDNS_SERVER not installed"; - if [ "$1" = "stop" ]; then exit 0; - else exit 5; fi; } +test -x $PDNS_SERVER || { echo "$PDNS_SERVER not installed"; + if [ "$1" = "stop" ]; then exit 0; + else exit 5; fi; } doPC() @@ -130,7 +130,7 @@ # Source LSB init functions -# providing start_daemon, killproc, pidofproc, +# providing start_daemon, killproc, pidofproc, # log_success_msg, log_failure_msg and log_warning_msg. # This is currently not used by UnitedLinux based distributions and # not needed for init scripts for UnitedLinux only. If it is used, @@ -155,7 +155,7 @@ rc_reset # Return values acc. to LSB for all commands but status: -# 0 - success +# 0 - success # 1 - generic or unspecified error # 2 - invalid or excess argument(s) # 3 - unimplemented feature (e.g. "reload") @@ -164,7 +164,7 @@ # 6 - program is not configured # 7 - program is not running # 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) -# +# # Note that starting an already running service, stopping # or restarting a not-running service as well as the restart # with force-reload (in case signaling is not supported) are @@ -172,92 +172,89 @@ case "$1" in start) - echo -n "Starting PowerDNS authoritative nameserver" - ## Start daemon with startproc(8). If this fails - ## the return value is set appropriately by startproc. - startproc $PDNS_SERVER $EXTRAOPTS --daemon --guardian=yes - - # Remember status and be verbose - rc_status -v - ;; + echo -n "Starting PowerDNS authoritative nameserver" + ## Start daemon with startproc(8). If this fails + ## the return value is set appropriately by startproc. + startproc $PDNS_SERVER $EXTRAOPTS --daemon + + # Remember status and be verbose + rc_status -v + ;; stop) - echo -n "Shutting down PowerDNS authoritative nameserver" - ## Stop daemon with killproc(8) and if this fails - ## killproc sets the return value according to LSB. - - killproc -TERM $PDNS_SERVER - - # Remember status and be verbose - rc_status -v - ;; + echo -n "Shutting down PowerDNS authoritative nameserver" + ## Stop daemon with killproc(8) and if this fails + ## killproc sets the return value according to LSB. + + killproc -TERM $PDNS_SERVER + + # Remember status and be verbose + rc_status -v + ;; try-restart|condrestart) - ## Do a restart only if the service was active before. - ## Note: try-restart is now part of LSB (as of 1.9). - ## RH has a similar command named condrestart. - if test "$1" = "condrestart"; then - echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}" - fi - $0 status - if test $? = 0; then - $0 restart - else - rc_reset # Not running is not a failure. - fi - # Remember status and be quiet - rc_status - ;; + ## Do a restart only if the service was active before. + ## Note: try-restart is now part of LSB (as of 1.9). + ## RH has a similar command named condrestart. + if test "$1" = "condrestart"; then + echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}" + fi + $0 status + if test $? = 0; then + $0 restart + else + rc_reset # Not running is not a failure. + fi + # Remember status and be quiet + rc_status + ;; restart|force-reload) - ## Stop the service and regardless of whether it was - ## running or not, start it again. - $0 stop - $0 start - - # Remember status and be quiet - rc_status - ;; + ## Stop the service and regardless of whether it was + ## running or not, start it again. + $0 stop + $0 start + + # Remember status and be quiet + rc_status + ;; reload) - ## Like force-reload, but if daemon does not support - ## signaling, do nothing (!) + ## Like force-reload, but if daemon does not support + ## signaling, do nothing (!) - echo -n "Reloading PowerDNS authoritative nameserver" - doPC cycle - rc_status -v - ;; + echo -n "Reloading PowerDNS authoritative nameserver" + doPC cycle + rc_status -v + ;; status) - echo -n "Checking for service PDNS " - ## Check status with checkproc(8), if process is running - ## checkproc will return with exit status 0. - - # Return value is slightly different for the status command: - # 0 - service up and running - # 1 - service dead, but /var/run/ pid file exists - # 2 - service dead, but /var/lock/ lock file exists - # 3 - service not running (unused) - # 4 - service status unknown :-( - # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) - - # NOTE: checkproc returns LSB compliant status values. - checkproc $PDNS_SERVER - # NOTE: rc_status knows that we called this init script with - # "status" option and adapts its messages accordingly. - rc_status -v - ;; + echo -n "Checking for service PDNS " + ## Check status with checkproc(8), if process is running + ## checkproc will return with exit status 0. + + # Return value is slightly different for the status command: + # 0 - service up and running + # 1 - service dead, but /var/run/ pid file exists + # 2 - service dead, but /var/lock/ lock file exists + # 3 - service not running (unused) + # 4 - service status unknown :-( + # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) + + # NOTE: checkproc returns LSB compliant status values. + checkproc $PDNS_SERVER + # NOTE: rc_status knows that we called this init script with + # "status" option and adapts its messages accordingly. + rc_status -v + ;; probe) - ## Optional: Probe for the necessity of a reload, print out the - ## argument to this init script which is required for a reload. - ## Note: probe is not (yet) part of LSB (as of 1.9) - - test /etc/pdns.conf -nt /var/run/pdns.pid && echo reload - ;; - - - # additional options, taken from the upstream init script + ## Optional: Probe for the necessity of a reload, print out the + ## argument to this init script which is required for a reload. + ## Note: probe is not (yet) part of LSB (as of 1.9) + + test /etc/pdns.conf -nt /var/run/pdns.pid && echo reload + ;; + # additional options, taken from the upstream init script force-stop) echo -n "Stopping PowerDNS authoritative nameserver" - killall -v -9 pdns_server - rc_status -v + killproc -KILL $PDNS_SERVER + rc_status -v ;; - monitor) if test "$NOTRUNNING" = "0" then @@ -267,72 +264,66 @@ fi ;; dump) - if test "$NOTRUNNING" = "0" - then - doPC list - echo $ret - else - echo "not running" - fi - ;; - + if test "$NOTRUNNING" = "0" + then + doPC list + echo $ret + else + echo "not running" + fi + ;; show) - if [ $# -lt 2 ] - then - echo Insufficient parameters - exit - fi - if test "$NOTRUNNING" = "0" - then - echo -n "$2=" - doPC show $2 ; echo $ret - else - echo "not running" - fi - ;; - + if [ $# -lt 2 ] + then + echo Insufficient parameters + exit + fi + if test "$NOTRUNNING" = "0" + then + echo -n "$2=" + doPC show $2 ; echo $ret + else + echo "not running" + fi + ;; mrtg) - if [ $# -lt 2 ] - then - echo Insufficient parameters - exit - fi - if test "$NOTRUNNING" = "0" - then - doPC show $2 ; echo $ret - if [ "$3x" != "x" ] - then - doPC show $3 ; echo $ret - else - echo 0 - fi - doPC uptime ; echo $ret - echo PowerDNS daemon - else - echo "not running" - fi - - ;; - + if [ $# -lt 2 ] + then + echo Insufficient parameters + exit + fi + if test "$NOTRUNNING" = "0" + then + doPC show $2 ; echo $ret + if [ "$3x" != "x" ] + then + doPC show $3 ; echo $ret + else + echo 0 + fi + doPC uptime ; echo $ret + echo PowerDNS daemon + else + echo "not running" + fi + ;; cricket) - if [ $# -lt 2 ] - then - echo Insufficient parameters - exit - fi - if test "$NOTRUNNING" = "0" - then - doPC show $2 ; echo $ret - else - echo "not running" - fi - - ;; - + if [ $# -lt 2 ] + then + echo Insufficient parameters + exit + fi + if test "$NOTRUNNING" = "0" + then + doPC show $2 ; echo $ret + else + echo "not running" + fi + ;; *) - echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe|force-stop|monitor|dump|show|mrtg|cricket}" - exit 1 - ;; + echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe|force-stop|monitor|dump|show|mrtg|cricket}" + exit 1 + ;; esac rc_exit ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit patterns-openSUSE
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package patterns-openSUSE checked in at Mon Dec 1 18:04:25 CET 2008. -------- --- patterns-openSUSE/patterns-openSUSE.changes 2008-11-30 21:58:57.000000000 +0100 +++ /mounts/work_src_done/STABLE/patterns-openSUSE/patterns-openSUSE.changes 2008-12-01 14:09:25.000000000 +0100 @@ -1,0 +2,5 @@ +Mon Dec 1 14:09:15 CET 2008 - coolo(a)suse.de + +- do not recommend boost-doc - boost-devel eats for two + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ patterns-openSUSE.spec ++++++ --- /var/tmp/diff_new_pack.H29616/_old 2008-12-01 18:04:08.000000000 +0100 +++ /var/tmp/diff_new_pack.H29616/_new 2008-12-01 18:04:08.000000000 +0100 @@ -25,7 +25,7 @@ AutoReqProv: on Summary: Patterns for Installation (full ftp tree) Version: 11.1 -Release: 67 +Release: 68 Url: http://en.opensuse.org/Patterns BuildRoot: %{_tmppath}/%{name}-%{version}-build Source: patterns-openSUSE-data.tar.bz2 @@ -123,6 +123,8 @@ /CD1/suse/setup/descr/non_oss-*.pat %changelog +* Mon Dec 01 2008 coolo(a)suse.de +- do not recommend boost-doc - boost-devel eats for two * Sun Nov 30 2008 coolo(a)suse.de - require NM-kde to make the solver pick the "right" NM-client * Sat Nov 29 2008 coolo(a)suse.de ++++++ patterns-openSUSE-data.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/patterns-openSUSE-data/data/DEVEL-C-C++ new/patterns-openSUSE-data/data/DEVEL-C-C++ --- old/patterns-openSUSE-data/data/DEVEL-C-C++ 2008-11-28 13:42:37.000000000 +0100 +++ new/patterns-openSUSE-data/data/DEVEL-C-C++ 2008-12-01 14:09:04.000000000 +0100 @@ -3,7 +3,6 @@ -Prq: +Prc: boost-devel -boost-doc boost-jam ddd posix_cc @@ -13,6 +12,8 @@ ltrace -Prc: +Psg: +#pragma online +boost-doc // 403368 dejagnu expect ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit pam-config
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package pam-config checked in at Mon Dec 1 18:04:12 CET 2008. -------- --- pam-config/pam-config.changes 2008-11-21 13:27:04.000000000 +0100 +++ /mounts/work_src_done/STABLE/pam-config/pam-config.changes 2008-12-01 14:57:33.168931000 +0100 @@ -1,0 +2,8 @@ +Mon Dec 1 14:56:56 CET 2008 - mc(a)suse.de + +- Version 0.68 + * fix linking; accept relative links (bnc#450019) + * fix some testcases + * Update translations. + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- pam-config-0.67.tar.bz2 New: ---- pam-config-0.68.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ pam-config.spec ++++++ --- /var/tmp/diff_new_pack.b27783/_old 2008-12-01 18:03:09.000000000 +0100 +++ /var/tmp/diff_new_pack.b27783/_new 2008-12-01 18:03:09.000000000 +0100 @@ -1,5 +1,5 @@ # -# spec file for package pam-config (Version 0.67) +# spec file for package pam-config (Version 0.68) # # Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -20,7 +20,7 @@ Name: pam-config Summary: Modify common PAM configuration files -Version: 0.67 +Version: 0.68 Release: 1 License: GPL v2 only AutoReqProv: on @@ -95,6 +95,11 @@ %ghost %config %{_sysconfdir}/pam.d/common-session-pc %changelog +* Mon Dec 01 2008 mc(a)suse.de +- Version 0.68 + * fix linking; accept relative links (bnc#450019) + * fix some testcases + * Update translations. * Fri Nov 21 2008 kukuk(a)suse.de - Version 0.67 * Update translations. ++++++ pam-config-0.67.tar.bz2 -> pam-config-0.68.tar.bz2 ++++++ ++++ 1648 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/ChangeLog new/pam-config-0.68/ChangeLog --- old/pam-config-0.67/ChangeLog 2008-11-21 13:11:52.000000000 +0100 +++ new/pam-config-0.68/ChangeLog 2008-12-01 14:44:24.000000000 +0100 @@ -1,3 +1,10 @@ +2008-12-01 Michael Calmer <mc(a)suse.de> + + * release version 0.68 + + * src/pam-config.c: fix linking; accept relative links (bnc#450019) + * tests/: fix some testcases + 2008-11-21 Thorsten Kukuk <kukuk(a)suse.de> * release version 0.67 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/configure.in new/pam-config-0.68/configure.in --- old/pam-config-0.67/configure.in 2008-11-21 13:10:23.000000000 +0100 +++ new/pam-config-0.68/configure.in 2008-12-01 14:39:41.000000000 +0100 @@ -1,6 +1,6 @@ dnl Process this file with autoconf to produce a configure script. AC_INIT(src/pam-config.c) -AM_INIT_AUTOMAKE("pam-config", 0.67) +AM_INIT_AUTOMAKE("pam-config", 0.68) AM_CONFIG_HEADER(config.h) AC_PREFIX_DEFAULT(/usr) diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/INSTALL new/pam-config-0.68/INSTALL --- old/pam-config-0.67/INSTALL 2008-09-03 13:53:42.000000000 +0200 +++ new/pam-config-0.68/INSTALL 2007-07-18 11:26:57.000000000 +0200 @@ -1,8 +1,8 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007 Free Software Foundation, Inc. +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free +Software Foundation, Inc. This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. @@ -10,10 +10,7 @@ Basic Installation ================== -Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -26,9 +23,9 @@ It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is +the results of its tests to speed up reconfiguring. (Caching is disabled by default to prevent problems with accidental use of stale -cache files. +cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail @@ -38,17 +35,20 @@ may remove or edit it. The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. 2. Type `make' to compile the package. @@ -67,9 +67,6 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. - Compilers and Options ===================== @@ -81,7 +78,7 @@ by setting variables in the command line or in the environment. Here is an example: - ./configure CC=c99 CFLAGS=-g LIBS=-lposix + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix *Note Defining Variables::, for more details. @@ -90,15 +87,17 @@ You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. Installation Names ================== @@ -191,12 +190,12 @@ ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). +overridden in the site shell script). Here is a another example: -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: + /bin/bash ./configure CONFIG_SHELL=/bin/bash - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash +Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent +configuration-related scripts to be executed by `/bin/bash'. `configure' Invocation ====================== diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/missing new/pam-config-0.68/missing --- old/pam-config-0.67/missing 2008-09-03 13:53:42.000000000 +0200 +++ new/pam-config-0.68/missing 2007-07-18 11:26:56.000000000 +0200 @@ -1,9 +1,9 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2006-05-10.23 +scriptversion=2005-06-08.21 -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard(a)iro.umontreal.ca>, 1996. @@ -33,8 +33,6 @@ fi run=: -sed_output='s/.* --output[ =]$[^ ]*$.*/\1/p' -sed_minuso='s/.* -o $[^ ]*$.*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. @@ -46,7 +44,7 @@ msg="missing on your system" -case $1 in +case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= @@ -79,7 +77,6 @@ aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c @@ -109,7 +106,7 @@ # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). -case $1 in +case "$1" in lex|yacc) # Not GNU programs, they don't have --version. ;; @@ -138,7 +135,7 @@ # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case $1 in +case "$1" in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -167,7 +164,7 @@ test -z "$files" && files="config.h" touch_files= for f in $files; do - case $f in + case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; @@ -195,8 +192,8 @@ You can get \`$1' as part of \`Autoconf' from any GNU archive site." - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + file=`echo "$*" | sed -n 's/.*--output[ =]*$[^ ]*$.*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*$[^ ]*$.*/\1/p'` if test -f "$file"; then touch $file else @@ -217,25 +214,25 @@ in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h - if test $# -ne 1; then + if [ $# -ne 1 ]; then eval LASTARG="\${$#}" - case $LASTARG in + case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then + if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then + if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi - if test ! -f y.tab.h; then + if [ ! -f y.tab.h ]; then echo >y.tab.h fi - if test ! -f y.tab.c; then + if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; @@ -247,18 +244,18 @@ in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c - if test $# -ne 1; then + if [ $# -ne 1 ]; then eval LASTARG="\${$#}" - case $LASTARG in + case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then + if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi - if test ! -f lex.yy.c; then + if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; @@ -270,9 +267,11 @@ \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then + file=`echo "$*" | sed -n 's/.*-o $[^ ]*$.*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=$[^ ]*$.*/\1/p'` + fi + if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file @@ -290,17 +289,11 @@ DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + file=`echo "$*" | sed -n 's/.*-o $[^ ]*$.*/\1/p'` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* $[^ ]*$ *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* $[^ ]*$ *$/\1/ - p - q - }' $infile` + file=`sed -n '/^@setfilename/ { s/.* $[^ ]*$ *$/\1/; p; q; }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi @@ -324,13 +317,13 @@ fi firstarg="$1" if shift; then - case $firstarg in + case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac - case $firstarg in + case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/NEWS new/pam-config-0.68/NEWS --- old/pam-config-0.67/NEWS 2008-11-21 13:12:33.000000000 +0100 +++ new/pam-config-0.68/NEWS 2008-12-01 14:47:51.000000000 +0100 @@ -4,6 +4,10 @@ Please send bug reports, questions and suggestions to <kukuk(a)thkukuk.de>. +Version 0.68 +* Update translations. +* use relative links + Version 0.67 * Update translations. * Add type option for pam_pwhistory. Files old/pam-config-0.67/po/zh_CN.gmo and new/pam-config-0.68/po/zh_CN.gmo differ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/po/zh_CN.po new/pam-config-0.68/po/zh_CN.po --- old/pam-config-0.67/po/zh_CN.po 2008-11-21 13:09:19.000000000 +0100 +++ new/pam-config-0.68/po/zh_CN.po 2008-12-01 14:47:55.000000000 +0100 @@ -1,7 +1,7 @@ # @TITLE@ # Copyright (C) 2006, SUSE Linux GmbH, Nuremberg -# Thruth Wang <lihaow(a)opera.com>, 2007, 2008. -# Eric Shan <ericalways(a)gmail.com>, 2008. +# Thruth Wang <lihaow(a)opera.com>, 2007, 2008. +# Eric Shan <ericalways(a)gmail.com>, 2008. # # This file is distributed under the same license as @PACKAGE@ package. FIRST # @@ -10,8 +10,8 @@ "Project-Id-Version: @PACKAGE@\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-11-07 12:06+0100\n" -"PO-Revision-Date: 2008-04-13 21:14+0800\n" -"Last-Translator: Eric Shan <ericalways(a)gmail.com>\n" +"PO-Revision-Date: 2008-12-01 01:33+0800\n" +"Last-Translator: Thruth Wang <wanglihao(a)gmail.com>\n" "Language-Team: Simplified Chinese\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -88,9 +88,9 @@ msgstr "警告：未能找到 /etc/security/pam_pwcheck.conf{.rpmsave} (%m)。\n" #: src/mod_pam_ck_connector.c:93 -#, fuzzy, c-format +#, c-format msgid "ERROR: Could not add pam_ck_connector.so to service '%s'" -msgstr "错误：未能将 pam_cryptpass.so 添加到服务'%s'" +msgstr "错误：未能将 pam_ck_connector.so 添加到服务'%s'" #: src/mod_pam_cryptpass.c:98 #, c-format @@ -119,9 +119,9 @@ msgstr "错误：模块 pam_thinkfinger.so 已经被启用。请先将它禁用。\n" #: src/mod_pam_mount.c:131 -#, fuzzy, c-format +#, c-format msgid "ERROR: Module pam_fp.so is enabled. Disable it first.\n" -msgstr "错误：模块 pam_thinkfinger.so 已经被启用。请先将它禁用。\n" +msgstr "错误：模块 pam_fp.so 已经被启用。请先将它禁用。\n" #: src/mod_pam_thinkfinger.c:91 #, c-format @@ -147,12 +147,12 @@ "错误：pam_mount.so 被启用了。为了使用 pam_thinkfinger.so 你需要先把它禁用！\n" #: src/mod_pam_thinkfinger.c:146 -#, fuzzy, c-format +#, c-format msgid "" "ERROR: pam_fp.so is enabled. In order to use pam_thinkfinger.so you need to " "disable it first!\n" msgstr "" -"错误：pam_mount.so 被启用了。为了使用 pam_thinkfinger.so 你需要先把它禁用！\n" +"错误：pam_fp.so 被启用了。为了使用 pam_thinkfinger.so 你需要先把它禁用！\n" #: src/pam-config.c:46 #, c-format @@ -218,7 +218,7 @@ #: src/pam-config.c:90 msgid " --list-modules List all supported modules\n" -msgstr "" +msgstr " --list-modules 列出所有支持模块\n" #: src/pam-config.c:92 msgid " --help Give this help list\n" @@ -282,19 +282,19 @@ msgstr "警告：没有找到文件'%s'，忽略备份。\n" #: src/pam-config.c:199 -#, fuzzy, c-format +#, c-format msgid "WARNING: Backup file '%s' already exist. Omitting backup.\n" -msgstr "警告：没有找到文件'%s'，忽略备份。\n" +msgstr "警告：备份文件'%s'已经存在。忽略备份。\n" #: src/pam-config.c:202 -#, fuzzy, c-format +#, c-format msgid "ERROR: Cannot create backup file '%s' (%m)\n" -msgstr "无法创建 %s 的备份文件：%m" +msgstr "错误：无法创建的备份文件'%s' (%m)\n" #: src/pam-config.c:206 -#, fuzzy, c-format +#, c-format msgid "ERROR: Cannot remove '%s' (%m)\n" -msgstr "无法创建 %s: %m\n" +msgstr "错误：无法移除 '%s' (%m)\n" #: src/pam-config.c:383 #, c-format @@ -388,12 +388,12 @@ msgstr "错误：未能禁用 pam_unix.so。\n" #: src/sanity_checks.c:217 -#, fuzzy, c-format +#, c-format msgid "" "ERROR: pam_apparmor and pam_selinux together is not allowed.\n" "Configuration not changed!\n" msgstr "" -"错误：ldap-account_only 只有在和 krb5 相结合时才可以。\n" +"错误：pam_apparmor 不能和 pam_selinux 组合使用。\n" "配置没有改变！\n" #: src/single_config.c:249 @@ -420,19 +420,3 @@ #, c-format msgid "Cannot create %s: %m\n" msgstr "无法创建 %s: %m\n" - -#~ msgid "" -#~ "INFO: Both options 'md5' and 'bigcrypt' found in service %s.\n" -#~ "INFO: 'md5' supersedes 'bigcrypt'. If you want to enable 'bigcrypt' " -#~ "remove 'md5' first.\n" -#~ msgstr "" -#~ "信息：在服务 %s 中同时找到了“md5”和“bigcrypt”选项。\n" -#~ "信息：“md5”将替代“bigcrypt”。如果您要启用“bigcrypt”，请先将“md5”移除。\n" - -#~ msgid "" -#~ "INFO: Both options 'audit' and 'debug' found in service %s.\n" -#~ "INFO: 'audit' supersedes 'debug'. If you want to enable 'debug' remove " -#~ "'audit' first.\n" -#~ msgstr "" -#~ "信息：在服务 %s 中同时找到了“audit”和“debug”选项。\n" -#~ "信息：“audit”将替代“debug”。如果您要启用“debug”，请先将“audit”移除。\n" diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/src/pam-config.8 new/pam-config-0.68/src/pam-config.8 --- old/pam-config-0.67/src/pam-config.8 2008-11-21 13:13:12.000000000 +0100 +++ new/pam-config-0.68/src/pam-config.8 2008-12-01 14:46:30.000000000 +0100 @@ -1,12 +1,12 @@ .\" Title: pam-config .\" Author: [see the "AUTHOR" section] .\" Generator: DocBook XSL Stylesheets v1.74.0 <http://docbook.sf.net/> -.\" Date: 11/21/2008 +.\" Date: 12/01/2008 .\" Manual: Reference Manual .\" Source: Reference Manual .\" Language: English .\" -.TH "PAM\-CONFIG" "8" "11/21/2008" "Reference Manual" "Reference Manual" +.TH "PAM\-CONFIG" "8" "12/01/2008" "Reference Manual" "Reference Manual" .\" ----------------------------------------------------------------- .\" * (re)Define some macros .\" ----------------------------------------------------------------- diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/src/pam-config.c new/pam-config-0.68/src/pam-config.c --- old/pam-config-0.67/src/pam-config.c 2008-11-07 11:33:53.000000000 +0100 +++ new/pam-config-0.68/src/pam-config.c 2008-12-01 11:07:52.000000000 +0100 @@ -148,17 +148,17 @@ } static int -check_symlink (const char *old, const char *new) +check_symlink (const char *file_pc, const char *file) { - if (access (new, F_OK) == -1) + if (access (file, F_OK) == -1) { - if (symlink (old, new) != 0) + if (symlink (basename(file_pc), file) != 0) { fprintf (stderr, - _("Error activating %s (%m)\n"), new); + _("Error activating %s (%m)\n"), file); fprintf (stderr, _("New config from %s is not in use!\n"), - old); + file_pc); return 1; } return 0; @@ -168,14 +168,14 @@ char buf[1024]; memset (&buf, 0, sizeof (buf)); - if (readlink (new, buf, sizeof (buf)) <= 0 || - strcmp (old, buf) != 0) + if (readlink (file, buf, sizeof (buf)) <= 0 || + strcmp (basename(file_pc), basename(buf)) != 0) { fprintf (stderr, - _("File %s is no symlink to %s.\n"), new, old); + _("File %s is no symlink to %s.\n"), file, file_pc); fprintf (stderr, _("New config from %s is is not in use!\n"), - old); + file_pc); return 1; } return 0; @@ -205,7 +205,7 @@ if (unlink (file) != 0) fprintf (stderr, _("ERROR: Cannot remove '%s' (%m)\n"), file); - if (symlink (file_pc, file) != 0) + if (symlink (basename(file_pc), file) != 0) { fprintf (stderr, _("Error activating %s (%m)\n"), file); @@ -924,7 +924,7 @@ fflush (stdout); /* Make sure output in logs is consistent */ if (unlink (conf_account) != 0 || - symlink (conf_account_pc, conf_account) != 0) + symlink (basename(conf_account_pc), conf_account) != 0) { fprintf (stderr, _("Error activating %s (%m)\n"), conf_account); @@ -934,7 +934,7 @@ } if (unlink (conf_auth) != 0 || - symlink (conf_auth_pc, conf_auth) != 0) + symlink (basename(conf_auth_pc), conf_auth) != 0) { fprintf (stderr, _("Error activating %s (%m)\n"), conf_auth); @@ -944,7 +944,7 @@ } if (unlink (conf_password) != 0 || - symlink (conf_password_pc, conf_password) != 0) + symlink (basename(conf_password_pc), conf_password) != 0) { fprintf (stderr, _("Error activating %s (%m)\n"), conf_password); @@ -955,7 +955,7 @@ } if (unlink (conf_session) != 0 || - symlink (conf_session_pc, conf_session) != 0) + symlink (basename(conf_session_pc), conf_session) != 0) { fprintf (stderr, _("Error activating %s (%m)\n"), conf_session); diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/config/Makefile new/pam-config-0.68/tests/config/Makefile --- old/pam-config-0.67/tests/config/Makefile 2008-11-21 13:12:49.000000000 +0100 +++ new/pam-config-0.68/tests/config/Makefile 2008-12-01 14:46:08.000000000 +0100 @@ -29,8 +29,8 @@ NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -build_triplet = x86_64-suse-linux-gnu -host_triplet = x86_64-suse-linux-gnu +build_triplet = i686-suse-linux-gnu +host_triplet = i686-suse-linux-gnu subdir = tests/config DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -49,11 +49,11 @@ SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run aclocal-1.10 -AMTAR = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run tar -AUTOCONF = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoconf -AUTOHEADER = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoheader -AUTOMAKE = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run automake-1.10 +ACLOCAL = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run aclocal-1.10 +AMTAR = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run tar +AUTOCONF = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoconf +AUTOHEADER = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoheader +AUTOMAKE = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run automake-1.10 AWK = gawk CC = gcc CCDEPMODE = depmode=gcc3 @@ -66,12 +66,12 @@ ECHO_C = ECHO_N = -n ECHO_T = -EGREP = /bin/grep -E +EGREP = /usr/bin/grep -E EXEEXT = EXTRA_CFLAGS = -Werror -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -DXTSTRINGDEFINES -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wshadow -Wstrict-prototypes -Wundef GMSGFMT = /usr/bin/msgfmt GMSGFMT_015 = /usr/bin/msgfmt -GREP = /bin/grep +GREP = /usr/bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} @@ -87,7 +87,7 @@ LTLIBICONV = -liconv LTLIBINTL = LTLIBOBJS = -MAKEINFO = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run makeinfo +MAKEINFO = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run makeinfo MKDIR_P = /bin/mkdir -p MSGFMT = /usr/bin/msgfmt MSGFMT_015 = /usr/bin/msgfmt @@ -106,17 +106,17 @@ SHELL = /bin/sh STRIP = USE_NLS = yes -VERSION = 0.67 +VERSION = 0.68 XGETTEXT = /usr/bin/xgettext XGETTEXT_015 = /usr/bin/xgettext XMLCATALOG = /usr/bin/xmlcatalog XMLLINT = /usr/bin/xmllint XML_CATALOG_FILE = /etc/xml/catalog XSLTPROC = /usr/bin/xsltproc -abs_builddir = /data/kukuk/pakete/svn/pam-config/trunk/tests/config -abs_srcdir = /data/kukuk/pakete/svn/pam-config/trunk/tests/config -abs_top_builddir = /data/kukuk/pakete/svn/pam-config/trunk -abs_top_srcdir = /data/kukuk/pakete/svn/pam-config/trunk +abs_builddir = /cvs/PAM/pam-config/trunk/tests/config +abs_srcdir = /cvs/PAM/pam-config/trunk/tests/config +abs_top_builddir = /cvs/PAM/pam-config/trunk +abs_top_srcdir = /cvs/PAM/pam-config/trunk ac_ct_CC = gcc am__include = include am__leading_dot = . @@ -124,9 +124,9 @@ am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin -build = x86_64-suse-linux-gnu +build = i686-suse-linux-gnu build_alias = -build_cpu = x86_64 +build_cpu = i686 build_os = linux-gnu build_vendor = suse builddir = . @@ -135,15 +135,15 @@ docdir = ${datarootdir}/doc/${PACKAGE} dvidir = ${docdir} exec_prefix = ${prefix} -host = x86_64-suse-linux-gnu +host = i686-suse-linux-gnu host_alias = -host_cpu = x86_64 +host_cpu = i686 host_os = linux-gnu host_vendor = suse htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info -install_sh = $(SHELL) /data/kukuk/pakete/svn/pam-config/trunk/install-sh +install_sh = $(SHELL) /cvs/PAM/pam-config/trunk/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale @@ -176,9 +176,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits tests/config/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/config/Makefile'; \ cd $(top_srcdir) && \ - $(AUTOMAKE) --gnits tests/config/Makefile + $(AUTOMAKE) --gnu tests/config/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/etc/pam.d/Makefile new/pam-config-0.68/tests/etc/pam.d/Makefile --- old/pam-config-0.67/tests/etc/pam.d/Makefile 2008-11-21 13:22:39.000000000 +0100 +++ new/pam-config-0.68/tests/etc/pam.d/Makefile 2008-12-01 11:08:06.000000000 +0100 @@ -29,8 +29,8 @@ NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -build_triplet = x86_64-suse-linux-gnu -host_triplet = x86_64-suse-linux-gnu +build_triplet = i686-suse-linux-gnu +host_triplet = i686-suse-linux-gnu subdir = tests/etc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -49,11 +49,11 @@ SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run aclocal-1.10 -AMTAR = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run tar -AUTOCONF = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoconf -AUTOHEADER = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoheader -AUTOMAKE = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run automake-1.10 +ACLOCAL = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run aclocal-1.10 +AMTAR = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run tar +AUTOCONF = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoconf +AUTOHEADER = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoheader +AUTOMAKE = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run automake-1.10 AWK = gawk CC = gcc CCDEPMODE = depmode=gcc3 @@ -66,12 +66,12 @@ ECHO_C = ECHO_N = -n ECHO_T = -EGREP = /bin/grep -E +EGREP = /usr/bin/grep -E EXEEXT = EXTRA_CFLAGS = -Werror -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -DXTSTRINGDEFINES -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wshadow -Wstrict-prototypes -Wundef GMSGFMT = /usr/bin/msgfmt GMSGFMT_015 = /usr/bin/msgfmt -GREP = /bin/grep +GREP = /usr/bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} @@ -87,7 +87,7 @@ LTLIBICONV = -liconv LTLIBINTL = LTLIBOBJS = -MAKEINFO = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run makeinfo +MAKEINFO = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run makeinfo MKDIR_P = /bin/mkdir -p MSGFMT = /usr/bin/msgfmt MSGFMT_015 = /usr/bin/msgfmt @@ -113,10 +113,10 @@ XMLLINT = /usr/bin/xmllint XML_CATALOG_FILE = /etc/xml/catalog XSLTPROC = /usr/bin/xsltproc -abs_builddir = /data/kukuk/pakete/svn/pam-config/trunk/tests/etc -abs_srcdir = /data/kukuk/pakete/svn/pam-config/trunk/tests/etc -abs_top_builddir = /data/kukuk/pakete/svn/pam-config/trunk -abs_top_srcdir = /data/kukuk/pakete/svn/pam-config/trunk +abs_builddir = /cvs/PAM/pam-config/trunk/tests/etc +abs_srcdir = /cvs/PAM/pam-config/trunk/tests/etc +abs_top_builddir = /cvs/PAM/pam-config/trunk +abs_top_srcdir = /cvs/PAM/pam-config/trunk ac_ct_CC = gcc am__include = include am__leading_dot = . @@ -124,9 +124,9 @@ am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin -build = x86_64-suse-linux-gnu +build = i686-suse-linux-gnu build_alias = -build_cpu = x86_64 +build_cpu = i686 build_os = linux-gnu build_vendor = suse builddir = . @@ -135,15 +135,15 @@ docdir = ${datarootdir}/doc/${PACKAGE} dvidir = ${docdir} exec_prefix = ${prefix} -host = x86_64-suse-linux-gnu +host = i686-suse-linux-gnu host_alias = -host_cpu = x86_64 +host_cpu = i686 host_os = linux-gnu host_vendor = suse htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info -install_sh = $(SHELL) /data/kukuk/pakete/svn/pam-config/trunk/install-sh +install_sh = $(SHELL) /cvs/PAM/pam-config/trunk/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/pam-config.test/Makefile new/pam-config-0.68/tests/pam-config.test/Makefile --- old/pam-config-0.67/tests/pam-config.test/Makefile 2008-11-21 13:12:49.000000000 +0100 +++ new/pam-config-0.68/tests/pam-config.test/Makefile 2008-12-01 14:46:08.000000000 +0100 @@ -29,8 +29,8 @@ NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -build_triplet = x86_64-suse-linux-gnu -host_triplet = x86_64-suse-linux-gnu +build_triplet = i686-suse-linux-gnu +host_triplet = i686-suse-linux-gnu subdir = tests/pam-config.test DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -49,11 +49,11 @@ SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run aclocal-1.10 -AMTAR = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run tar -AUTOCONF = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoconf -AUTOHEADER = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoheader -AUTOMAKE = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run automake-1.10 +ACLOCAL = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run aclocal-1.10 +AMTAR = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run tar +AUTOCONF = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoconf +AUTOHEADER = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoheader +AUTOMAKE = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run automake-1.10 AWK = gawk CC = gcc CCDEPMODE = depmode=gcc3 @@ -66,12 +66,12 @@ ECHO_C = ECHO_N = -n ECHO_T = -EGREP = /bin/grep -E +EGREP = /usr/bin/grep -E EXEEXT = EXTRA_CFLAGS = -Werror -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -DXTSTRINGDEFINES -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wshadow -Wstrict-prototypes -Wundef GMSGFMT = /usr/bin/msgfmt GMSGFMT_015 = /usr/bin/msgfmt -GREP = /bin/grep +GREP = /usr/bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} @@ -87,7 +87,7 @@ LTLIBICONV = -liconv LTLIBINTL = LTLIBOBJS = -MAKEINFO = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run makeinfo +MAKEINFO = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run makeinfo MKDIR_P = /bin/mkdir -p MSGFMT = /usr/bin/msgfmt MSGFMT_015 = /usr/bin/msgfmt @@ -106,17 +106,17 @@ SHELL = /bin/sh STRIP = USE_NLS = yes -VERSION = 0.67 +VERSION = 0.68 XGETTEXT = /usr/bin/xgettext XGETTEXT_015 = /usr/bin/xgettext XMLCATALOG = /usr/bin/xmlcatalog XMLLINT = /usr/bin/xmllint XML_CATALOG_FILE = /etc/xml/catalog XSLTPROC = /usr/bin/xsltproc -abs_builddir = /data/kukuk/pakete/svn/pam-config/trunk/tests/pam-config.test -abs_srcdir = /data/kukuk/pakete/svn/pam-config/trunk/tests/pam-config.test -abs_top_builddir = /data/kukuk/pakete/svn/pam-config/trunk -abs_top_srcdir = /data/kukuk/pakete/svn/pam-config/trunk +abs_builddir = /cvs/PAM/pam-config/trunk/tests/pam-config.test +abs_srcdir = /cvs/PAM/pam-config/trunk/tests/pam-config.test +abs_top_builddir = /cvs/PAM/pam-config/trunk +abs_top_srcdir = /cvs/PAM/pam-config/trunk ac_ct_CC = gcc am__include = include am__leading_dot = . @@ -124,9 +124,9 @@ am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin -build = x86_64-suse-linux-gnu +build = i686-suse-linux-gnu build_alias = -build_cpu = x86_64 +build_cpu = i686 build_os = linux-gnu build_vendor = suse builddir = . @@ -135,15 +135,15 @@ docdir = ${datarootdir}/doc/${PACKAGE} dvidir = ${docdir} exec_prefix = ${prefix} -host = x86_64-suse-linux-gnu +host = i686-suse-linux-gnu host_alias = -host_cpu = x86_64 +host_cpu = i686 host_os = linux-gnu host_vendor = suse htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info -install_sh = $(SHELL) /data/kukuk/pakete/svn/pam-config/trunk/install-sh +install_sh = $(SHELL) /cvs/PAM/pam-config/trunk/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale @@ -176,9 +176,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits tests/pam-config.test/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/pam-config.test/Makefile'; \ cd $(top_srcdir) && \ - $(AUTOMAKE) --gnits tests/pam-config.test/Makefile + $(AUTOMAKE) --gnu tests/pam-config.test/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/single.out/test-mount-thinkfinger.err new/pam-config-0.68/tests/single.out/test-mount-thinkfinger.err --- old/pam-config-0.67/tests/single.out/test-mount-thinkfinger.err 2008-09-03 13:53:12.000000000 +0200 +++ new/pam-config-0.68/tests/single.out/test-mount-thinkfinger.err 2008-11-28 15:32:34.000000000 +0100 @@ -1 +1 @@ -ERROR: Module pam_thinkfinger.so is enabled. Disable it first. +ERROR: Module pam_fp.so is enabled. Disable it first. diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/single.out/test-thinkfinger-mount.err new/pam-config-0.68/tests/single.out/test-thinkfinger-mount.err --- old/pam-config-0.67/tests/single.out/test-thinkfinger-mount.err 2008-09-03 13:53:12.000000000 +0200 +++ new/pam-config-0.68/tests/single.out/test-thinkfinger-mount.err 2008-11-28 15:32:39.000000000 +0100 @@ -1,2 +1,2 @@ WARNING: Found module 'pam_mount.so' in file 'gdm'. -ERROR: pam_mount.so is enabled. In order to use pam_thinkfinger.so you need to disable it first! +ERROR: pam_mount.so is enabled. In order to use pam_fp.so you need to disable it first! diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/single.out/test-thinkfinger.out new/pam-config-0.68/tests/single.out/test-thinkfinger.out --- old/pam-config-0.67/tests/single.out/test-thinkfinger.out 2008-09-03 13:53:12.000000000 +0200 +++ new/pam-config-0.68/tests/single.out/test-thinkfinger.out 2008-11-28 15:32:58.000000000 +0100 @@ -12,7 +12,7 @@ # traditional Unix authentication mechanisms. # auth required pam_env.so -auth sufficient pam_thinkfinger.so +auth sufficient pam_fp.so auth required pam_unix2.so debug #%PAM-1.0 # diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/testcases/test-mount-thinkfinger.single new/pam-config-0.68/tests/testcases/test-mount-thinkfinger.single --- old/pam-config-0.67/tests/testcases/test-mount-thinkfinger.single 2008-09-03 13:53:13.000000000 +0200 +++ new/pam-config-0.68/tests/testcases/test-mount-thinkfinger.single 2008-11-28 15:30:50.000000000 +0100 @@ -9,7 +9,7 @@ . support/header.sh # Enable pam_thinkfinger.so -$PAMCONFIG -a --thinkfinger +$PAMCONFIG -a --fp # Try to add module pam_mount.so to service gdm. Should fail. $PAMCONFIG --service gdm -a --mount echo $? diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/testcases/test-thinkfinger-mount.single new/pam-config-0.68/tests/testcases/test-thinkfinger-mount.single --- old/pam-config-0.67/tests/testcases/test-thinkfinger-mount.single 2008-09-03 13:53:13.000000000 +0200 +++ new/pam-config-0.68/tests/testcases/test-thinkfinger-mount.single 2008-11-28 15:31:29.000000000 +0100 @@ -3,7 +3,7 @@ $PAMCONFIG --service gdm -a --mount # this should produce an error msg -$PAMCONFIG -a --thinkfinger +$PAMCONFIG -a --fp echo $? # no need for footers here as we're not interessted in changes to # pam.d files here diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/testcases/test-thinkfinger.single new/pam-config-0.68/tests/testcases/test-thinkfinger.single --- old/pam-config-0.67/tests/testcases/test-thinkfinger.single 2008-09-03 13:53:13.000000000 +0200 +++ new/pam-config-0.68/tests/testcases/test-thinkfinger.single 2008-11-28 15:32:24.000000000 +0100 @@ -1,6 +1,6 @@ #!/bin/sh . support/header.sh -$PAMCONFIG -a --thinkfinger +$PAMCONFIG -a --fp . support/footer-common.sh ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit opensuse-manual_en
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package opensuse-manual_en checked in at Mon Dec 1 18:02:50 CET 2008. -------- --- opensuse-manual_en/opensuse-manual_en.changes 2008-11-24 17:51:52.000000000 +0100 +++ /mounts/work_src_done/STABLE/opensuse-manual_en/opensuse-manual_en.changes 2008-12-01 13:21:24.000000000 +0100 @@ -1,0 +2,5 @@ +Mon Dec 1 13:20:32 CET 2008 - ke(a)suse.de + +- Attach GFDL license text; bnc#450304. + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ opensuse-manual_en.spec ++++++ --- /var/tmp/diff_new_pack.g26659/_old 2008-12-01 18:02:17.000000000 +0100 +++ /var/tmp/diff_new_pack.g26659/_new 2008-12-01 18:02:17.000000000 +0100 @@ -23,7 +23,7 @@ %define my_prov_obs suselinux-adminguide_%{my_lang} suselinux-userguide_%{my_lang} suselinux-manual_%{my_lang} %define my_book opensuse-html Version: 11.1 -Release: 28 +Release: 29 Obsoletes: %{my_prov_obs} Provides: %{my_prov_obs} Provides: locale(desktop-data-openSUSE:en) @@ -425,6 +425,8 @@ %dir /usr/share/gnome %dir /usr/share/gnome/help %changelog +* Mon Dec 01 2008 ke(a)suse.de +- Attach GFDL license text; bnc#450304. * Mon Nov 24 2008 ke(a)suse.de - Update text and image files. * Fri Nov 21 2008 ke(a)suse.de ++++++ opensuse-apparmor-admin_en.pdf ++++++ (binary differes) ++++++ opensuse-apparmor-quick_en.pdf ++++++ (binary differes) ++++++ opensuse-apps_en.pdf ++++++ (binary differes) ++++++ opensuse-gnomequick_en.pdf ++++++ (binary differes) ++++++ opensuse-gnomeuser_en.pdf ++++++ (binary differes) ++++++ opensuse-html_en-desktop.tar.bz2 ++++++ ++++++ opensuse-html_en-html.tar.bz2 ++++++ opensuse-manual_en/opensuse-html_en-html.tar.bz2 /mounts/work_src_done/STABLE/opensuse-manual_en/opensuse-html_en-html.tar.bz2 differ: byte 11, line 1 ++++++ opensuse-html_en.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/xml/64bit_issues.xml new/xml/64bit_issues.xml --- old/xml/64bit_issues.xml 2008-11-24 17:34:30.000000000 +0100 +++ new/xml/64bit_issues.xml 2008-12-01 10:47:47.000000000 +0100 @@ -51,7 +51,7 @@ </para> <para> An exception from this rule is PAM (pluggable authentication modules). - &product; uses PAM in the authentication process as a layer that + &productname; uses PAM in the authentication process as a layer that mediates between user and application. On a 64-Bit operating system that also runs 32-Bit applications it is necessary to always install both versions of of a PAM module. diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/xml/inst_yast2.xml new/xml/inst_yast2.xml --- old/xml/inst_yast2.xml 2008-11-24 17:34:41.000000000 +0100 +++ new/xml/inst_yast2.xml 2008-12-01 10:47:58.000000000 +0100 @@ -398,14 +398,14 @@ <literal>instlux</literal> is automatically uninstalled. </para> <tip os="osuse;sled"> - <title>Installing &product; alongside Microsoft Windows</title> + <title>Installing &productname; alongside Microsoft Windows</title> <para> - &product; can easily be installed alongside Microsoft Windows. Carry + &productname; can easily be installed alongside Microsoft Windows. Carry out the installation as described below—an existing Windows installation will automatically be detected and a dual boot option will be installed. If Windows covers the whole installation disk, the installation routine will make a reasonable proposal to shrink an - existing Windows partition in order to make room for the &product;. + existing Windows partition in order to make room for the &productname;. Please read <xref linkend="sec.i.yast2.proposal.partitioning.windows"/> prior to the installation for detailed information. @@ -1784,7 +1784,7 @@ <title>Existing SSH Host Keys</title> <para> - If you install &product; on a machine with existing Linux installations, + If you install &productname; on a machine with existing Linux installations, the installation routine automatically imports the SSH host key with the most recent access time from an existing installation. </para> ++++++ opensuse-kdequick_en.pdf ++++++ (binary differes) ++++++ opensuse-kdeuser_en.pdf ++++++ (binary differes) ++++++ opensuse-reference_en.pdf ++++++ (binary differes) ++++++ opensuse-startup_en.pdf ++++++ (binary differes) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit nautilus
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package nautilus checked in at Mon Dec 1 18:02:05 CET 2008. -------- --- GNOME/nautilus/nautilus.changes 2008-11-12 01:38:33.000000000 +0100 +++ /mounts/work_src_done/STABLE/nautilus/nautilus.changes 2008-11-30 23:42:40.000000000 +0100 @@ -1,0 +2,8 @@ +Sun Nov 30 23:41:55 CET 2008 - vuntz(a)novell.com + +- Remove sles_version conditional; make nautilus-search.desktop + mandatory on SLES/SLED. + (This was initially done by Federico, but I redid it to remove + both %sles_version) + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ nautilus.spec ++++++ --- /var/tmp/diff_new_pack.B24773/_old 2008-12-01 18:01:48.000000000 +0100 +++ /var/tmp/diff_new_pack.B24773/_new 2008-12-01 18:01:48.000000000 +0100 @@ -41,7 +41,7 @@ License: GPL v2 or later Group: Productivity/File utilities Version: 2.24.1 -Release: 5 +Release: 6 Summary: The GNOME 2.x Desktop File Manager Source: ftp://ftp.gnome.org/pub/gnome/sources/nautilus/2.20/%{name}-%{version}.tar.… Url: http://www.gnome.org @@ -104,9 +104,7 @@ %prep %setup -q gnome-patch-translation-prepare -%if ! %sles_version %patch4 -p1 -%endif %patch5 -p1 %patch6 -p0 %patch7 @@ -150,9 +148,7 @@ %suse_update_desktop_file nautilus-file-management-properties System FileManager X-SuSE-ControlCenter-LookAndFeel %suse_update_desktop_file nautilus-folder-handler %suse_update_desktop_file -G "File Browser" nautilus-home System FileManager -%if ! %sles_version %suse_update_desktop_file -G "Nautilus Search Tool" nautilus-search System FileManager -%endif %suse_update_desktop_file -G "File Browser" network-scheme System Network mkdir -p $RPM_BUILD_ROOT/%{_libdir}/nautilus/extensions-1.0 mkdir -p $RPM_BUILD_ROOT/%{_libdir}/nautilus/extensions-2.0 @@ -209,7 +205,12 @@ %{_datadir}/gtk-doc/html/libnautilus-extension %changelog -* Tue Nov 11 2008 federico(a)novell.com +* Sun Nov 30 2008 vuntz(a)novell.com +- Remove sles_version conditional; make nautilus-search.desktop + mandatory on SLES/SLED. + (This was initially done by Federico, but I redid it to remove + both %%sles_version) +* Wed Nov 12 2008 federico(a)novell.com - Updated nautilus-sysadmin-desktop-items.diff to fix https://bugzilla.novell.com/show_bug.cgi?id=438277 - icon positions in the desktop don't get restored. @@ -314,7 +315,7 @@ + Show file name instead of URI in the bookmark editor window for local files + Polish "Visible Columns" list view dialog. -* Fri Aug 08 2008 maw(a)suse.de +* Sat Aug 09 2008 maw(a)suse.de - Update to version 2.23.6.1: + Support transferring files with reserved FAT characters to a FAT file system; replace them with an underscore if neccessary @@ -392,14 +393,14 @@ + Respin the following patches: nautilus-bnc366100-bgo338933-ignore-foreign-desktop-files.diff and nautilus-bnc363122-lockdown-context-menus.diff. -* Fri Jun 06 2008 hpj(a)suse.de +* Sat Jun 07 2008 hpj(a)suse.de - Back out nautilus-bnc376669-always-update-thumbnail.patch (bnc#376669). * Fri Jun 06 2008 rodrigo(a)suse.de - Add nautilus-bnc397852-huge-memory-leak.patch (bnc#397852) * Wed May 21 2008 hpj(a)suse.de - Add nautilus-bnc393226-dont-move-to-burn.patch (bnc#393226). -* Mon May 19 2008 hpj(a)suse.de +* Tue May 20 2008 hpj(a)suse.de - Add nautilus-bnc376669-always-update-thumbnail.patch (bnc#376669). * Thu May 01 2008 hpj(a)suse.de - Removed previously disabled patches that were made obsolete by @@ -442,7 +443,7 @@ * Thu Apr 10 2008 ro(a)suse.de - added baselibs.conf file to build xxbit packages for multilib support -* Wed Apr 02 2008 hpj(a)suse.de +* Thu Apr 03 2008 hpj(a)suse.de - Upgraded to version 2.22.1: * Fix crashes and leaks. * Fix emblem display in property page. @@ -474,7 +475,7 @@ - Add back gtk2-devel to the devel requires * Fri Mar 21 2008 vuntz(a)suse.de - Add a gnome-desktop-devel buildrequires to fix the build. -* Thu Mar 20 2008 jpr(a)suse.de +* Fri Mar 21 2008 jpr(a)suse.de - Remove obsolete -devel package requries - Remove medusa obsoletes, not relevant to any shipping distros * Thu Mar 13 2008 sbrabec(a)suse.cz @@ -496,7 +497,7 @@ - Use %%suse_update_desktop_file for nautilus-autorun-software and nautilus-folder-handler to mark them as translatable. - Add nautilus-bnc366455-change-ownership.patch to fix bnc#366455. -* Tue Mar 04 2008 maw(a)suse.de +* Wed Mar 05 2008 maw(a)suse.de - Update to version 2.21.92: + Build fixes + Fix crashes and leaks @@ -713,7 +714,7 @@ - Fix clash with symbol names in gtk+ * Wed Sep 20 2006 sbrabec(a)suse.cz - Update MIME database in scriptlets (#201729). -* Wed Sep 13 2006 jhargadon(a)suse.de +* Thu Sep 14 2006 jhargadon(a)suse.de - update to version 2.16.0 - Handle enter activation when using typeahead search - Avoid using gnome_vfs_is_local in wrong places @@ -839,7 +840,7 @@ - Fixed I18N problems: * untranslatable Search string (#173448) * uninitialized locale (#173448#c3) -* Tue May 16 2006 federico(a)novell.com +* Wed May 17 2006 federico(a)novell.com - Updated nautilus-158158-ignore-foreign-desktop-files.diff to fix https://bugzilla.novell.com/show_bug.cgi?id=176123. The "OnlyShowIn" key in desktop files can contain multiple items. Also @@ -850,14 +851,14 @@ toggle button to the left of path bar in navigation windows. Pressing this button will switch to using a location entry instead of the path bar. -* Thu May 11 2006 federico(a)novell.com +* Fri May 12 2006 federico(a)novell.com - Updated nautilus-155010-desktop-volume-policy.diff; this fixes https://bugzilla.novell.com/show_bug.cgi?id=175076. This fixes a crash when dragging a volume to the trash. * Wed May 10 2006 joeshaw(a)suse.de - Update search patch to remove annoying "queuing <whatever>" debug spew. -* Tue May 09 2006 federico(a)novell.com +* Wed May 10 2006 federico(a)novell.com - Added nautilus-142860-vfs-drive-for-extensions.diff to fix the Nautilus part of bug https://bugzilla.novell.com/show_bug.cgi?id=142860. This lets @@ -904,7 +905,7 @@ - Added nautilus-155337-icon-positioning-on-reload.diff to fix bug [#155337]. Now icons in the desktop are not repositioned if the desktop gets reloaded. -* Thu Mar 16 2006 federico(a)novell.com +* Fri Mar 17 2006 federico(a)novell.com - Added nautilus-perf-no-burn-uri-for-desktop.diff. This makes Nautilus not do unnecessary work when initializing the desktop, saving 1 second during login. @@ -915,7 +916,7 @@ - use beagle on ppc64 as well * Thu Mar 02 2006 sbrabec(a)suse.cz - Translations from upstream moved to gnome-patch-translation. -* Thu Feb 23 2006 federico(a)novell.com +* Fri Feb 24 2006 federico(a)novell.com - Added nautilus-130796-bad-icon-placement.diff to fix https://bugzilla.novell.com/show_bug.cgi?id=130796. This makes desktop icons with very wide labels be placed correctly, instead of @@ -927,7 +928,7 @@ isn't running. * Sun Feb 19 2006 aj(a)suse.de - Reduce BuildRequires. -* Fri Feb 17 2006 gekker(a)suse.de +* Sat Feb 18 2006 gekker(a)suse.de - ficup .desktop files for UI team * Mon Feb 13 2006 federico(a)novell.com - Added nautilus-130796-bad-icon-placement.diff to fix @@ -950,7 +951,7 @@ - converted neededforbuild to BuildRequires * Mon Jan 23 2006 joeshaw(a)suse.de - Update search patch to only search the files backend -* Tue Jan 17 2006 gekker(a)suse.de +* Wed Jan 18 2006 gekker(a)suse.de - Remove Requires: on control-center2 and gnome-themes (#142237) * Tue Dec 06 2005 sbrabec(a)suse.cz - Do not require beagle on ppc64. @@ -964,7 +965,7 @@ * Thu Dec 01 2005 federico(a)novell.com - Updated nautilus-6014-network-servers-desktop-icon.diff. When doing "Clean up by Name", the Network Servers icon will now be put after your Home icon. -* Wed Nov 30 2005 federico(a)novell.com +* Thu Dec 01 2005 federico(a)novell.com - Added nautilus-6014-network-servers-desktop-icon.diff to fix bug #6014. This Creates a "Network Servers" icon in the desktop. - Added nautilus-136167-no-default-window.diff to fix bug #136167. @@ -974,7 +975,7 @@ - Update to version 2.12.2 * Mon Nov 28 2005 gekker(a)suse.de - Enable nauilus sidebar by default (#132383). -* Wed Nov 16 2005 federico(a)novell.com +* Thu Nov 17 2005 federico(a)novell.com - Added nautilus-default-thumbnail-size.diff. This makes the default size for thumbnails be 64 pixels, which looks better with the default theme than the old value of 96 pixels. @@ -982,11 +983,11 @@ - Update nautilus-search patch to 20051101. - Add patch to hide the zoom and "view as" controls from the location bar. -* Mon Nov 07 2005 federico(a)novell.com +* Tue Nov 08 2005 federico(a)novell.com - Added nautilus-115467-dont-overlap-volume-icons.diff to fix part of bug #115467. With this, Nautilus will not overlap the icons when you insert a CD or USB stick. -* Tue Nov 01 2005 federico(a)novell.com +* Wed Nov 02 2005 federico(a)novell.com - Updated nautilus-submount.patch to fix bug #127509. With this, the "Unmount volume" command will appear again for network volumes. * Thu Oct 13 2005 gekker(a)suse.de @@ -1003,7 +1004,7 @@ - Add DocPath to .desktop file * Thu Oct 06 2005 sbrabec(a)suse.de - Require gnome-themes. -* Tue Oct 04 2005 federico(a)novell.com +* Wed Oct 05 2005 federico(a)novell.com - Added nautilus-consistent-home-folder-name.diff to make the name of $HOME consistent between the path bar and side bar in Nautilus and GtkFileChooser. @@ -1059,7 +1060,7 @@ - Update to version 2.10.0 (GNOME 2.10). * Mon Mar 07 2005 gekker(a)suse.de - Add nautilus-background-memory.patch -* Thu Mar 03 2005 gekker(a)suse.de +* Fri Mar 04 2005 gekker(a)suse.de - Update to version 2.9.92 * Fri Feb 11 2005 gekker(a)suse.de - Update to 2.9.91 @@ -1106,7 +1107,7 @@ * Tue Sep 21 2004 hhetter(a)suse.de - show "drives:" location instead of "computer:" and recognize /var/lib/Desktop -* Tue Sep 07 2004 clahey(a)suse.de +* Wed Sep 08 2004 clahey(a)suse.de - Added OnlyShowIn=GNOME;. * Tue Aug 24 2004 dave(a)suse.de - Added nautilus-location-crash.patch, ximian bug #63445 @@ -1279,7 +1280,7 @@ - gnome-common in #neededforbuild * Fri Jun 07 2002 hhetter(a)suse.de - really build nautilus treeview and notes -* Wed Jun 05 2002 ro(a)suse.de +* Thu Jun 06 2002 ro(a)suse.de - fix libdir usage * Wed Jun 05 2002 hhetter(a)suse.de - added missing pkgtool files @@ -1293,7 +1294,7 @@ * Tue May 07 2002 ro(a)suse.de - up to 1.1.15 - added gail to neededforbuild (for eel2) -* Thu Jan 31 2002 ro(a)suse.de +* Fri Feb 01 2002 ro(a)suse.de - changed neededforbuild <libpng> to <libpng-devel-packages> * Thu Jan 24 2002 hhetter(a)suse.de - initial SuSE package for GNOME 2.0 platform ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit nagios-nrpe
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package nagios-nrpe checked in at Mon Dec 1 18:01:38 CET 2008. -------- --- nagios-nrpe/nagios-nrpe.changes 2008-11-27 19:30:47.000000000 +0100 +++ /mounts/work_src_done/STABLE/nagios-nrpe/nagios-nrpe.changes 2008-12-01 16:38:09.000000000 +0100 @@ -1,0 +2,6 @@ +Mon Dec 1 16:37:30 CET 2008 - lrupp(a)suse.de + +- disable buffersize patch per default: breaks compatibility +- run try-restart only if the service is installed + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ nagios-nrpe.spec ++++++ --- /var/tmp/diff_new_pack.D20107/_old 2008-12-01 17:59:51.000000000 +0100 +++ /var/tmp/diff_new_pack.D20107/_new 2008-12-01 17:59:51.000000000 +0100 @@ -20,12 +20,17 @@ Name: nagios-nrpe %define realname nrpe +# to enable support for really long plugin-output (available since nagios v3) +# set the macro below to 1. +# Note: this change is incompatible to old versions, therefore disabled per +# default +%define nagios3only 0 Summary: Nagios Remote Plug-In Executor Group: System/Monitoring License: GPL v2 or later Url: http://www.nagios.org/ Version: 2.12 -Release: 2 +Release: 3 Source0: %realname-%version.tar.bz2 Source1: rcnrpe Source2: nagios-nrpe-rpmlintrc @@ -143,7 +148,9 @@ %setup -n %realname-%version %patch %patch1 +%if %{nagios3only} %patch2 +%endif %build %configure \ @@ -252,8 +259,12 @@ %postun client %restart_on_update nrpe -%restart_on_update xinetd -%restart_on_update inetd +if [ -f etc/init.d/xinetd ]; then + %restart_on_update xinetd +fi +if [ -f etc/init.d/inetd ]; then + %restart_on_update inetd +fi %insserv_cleanup %clean @@ -285,6 +296,9 @@ %_sbindir/nrpe %changelog +* Mon Dec 01 2008 lrupp(a)suse.de +- disable buffersize patch per default: breaks compatibility +- run try-restart only if the service is installed * Thu Nov 27 2008 lrupp(a)suse.de - Added nagios-nrpe-buffersize.patch: support long check output of plugins, which is possible since Nagios 3.0 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit mvapich2
by root＠Hilbert.suse.de 01 Dec '08

01 Dec '08

Hello community, here is the log from the commit of package mvapich2 checked in at Mon Dec 1 17:59:59 CET 2008. -------- --- mvapich2/mvapich2.changes 2008-10-30 11:40:47.000000000 +0100 +++ /mounts/work_src_done/STABLE/mvapich2/mvapich2.changes 2008-12-01 16:05:38.251884000 +0100 @@ -1,0 +2,5 @@ +Mon Dec 1 16:05:29 CET 2008 - ro(a)suse.de + +- add ExcludeArch for s390 s390x + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ mvapich2.spec ++++++ --- /var/tmp/diff_new_pack.i19474/_old 2008-12-01 17:59:43.000000000 +0100 +++ /var/tmp/diff_new_pack.i19474/_new 2008-12-01 17:59:43.000000000 +0100 @@ -21,7 +21,7 @@ Name: mvapich2 Summary: OSU MVAPICH2 MPI package Version: 0.9.8 -Release: 124 +Release: 125 License: BSD 3-Clause Group: Development/Libraries/Parallel Source0: %{name}-%{version}.tar.bz2 @@ -33,6 +33,7 @@ BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: gcc-c++ gcc-fortran libibcommon-devel libibumad-devel libibverbs-devel librdmacm-devel mpi-selector python-devel sysfsutils xorg-x11-devel Requires: mpi-selector +ExcludeArch: s390 s390x # bug437293 %ifarch ppc64 Obsoletes: mvapich2-64bit @@ -125,6 +126,8 @@ %_includedir/* %changelog +* Mon Dec 01 2008 ro(a)suse.de +- add ExcludeArch for s390 s390x * Thu Oct 30 2008 olh(a)suse.de - obsolete old -XXbit packages (bnc#437293) * Tue Aug 21 2007 kejohnson(a)suse.de ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0