https://bugzilla.novell.com/show_bug.cgi?id=323541#c1 Marcus Schaefer changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|ms@novell.com |mhopf@novell.com --- Comment #1 from Marcus Schaefer 2007-09-17 02:00:59 MST --- The ISDV4 device has been tested with FSC (Fujitsu Siemens Computers) machines. I'm not aware of the Lenovo Thinkpad X60 Tablet model. Whether it requires a special configuration or the driver doesn't work should be investigated by our input specialist ;) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c3 --- Comment #3 from Carlos Lange 2007-09-17 08:09:28 MST --- The model number is 63635AU, as I said above, and SaX.log is attached. BTW, 3D acceleration checkbox is checked in SaX2, but when I test, the 3D symbol is crossed. Also my glxgears give ~940 FPM. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c5 --- Comment #5 from Carlos Lange 2007-09-17 08:31:31 MST --- I got the full identification from s2ram: This machine can be identified by: sys_vendor = "LENOVO" sys_product = "63635AU" sys_version = "ThinkPad X60 Tablet" bios_version = "7JET23WW (1.08 )" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c7 Matthias Hopf changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |behlert@novell.com --- Comment #7 from Matthias Hopf 2007-10-12 10:07:34 MST --- I don't think I will be able to do any investigations without having the hardware here. Stefan, do we have an X60 Tablet PC? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c11 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |sndirsch@novell.com Status|NEW |NEEDINFO Info Provider| |dkukawka@novell.com --- Comment #11 from Stefan Dirsch 2007-11-27 15:29:14 MST --- See comment #7. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |carlos.lange@ualberta.ca -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c14 --- Comment #14 from Carlos Lange 2007-11-28 11:19:43 MST --- Created an attachment (id=185141) --> (https://bugzilla.novell.com/attachment.cgi?id=185141) Xorg.0.log -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c16 --- Comment #16 from Danny Kukawka 2007-11-28 11:45:14 MST --- Please attach the outputs of these commands: * lshal * setserial -g /dev/ttyS* (as root user) Please follow http://en.opensuse.org/TabletPCs#Configuring_Your_Tablet_Device and activate also you Pen and Eraser. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c18 --- Comment #18 from Carlos Lange 2007-11-28 14:50:07 MST --- OK, after activating both the Pen and the Eraser, the pen works now. I did copy the new mouse sections to my old xorg.conf, and the tablet functions are working. The pen button acts as middle-click, as expected. Now, since I tried first the default setting and then activating only the Pen and I found that it does not work, I would strongly suggest that activation of Pen+Eraser be done by default in SaX2 for this machine, because it is really not obvious that it will work only after that. My thinking, for instance, was that the more things I turn on, the larger the chances of things not working well, so I tried to start with the basic setting. But if the default activates Pen+Eraser, then I would have left it alone for the test. I attach the requested files here for your reference. Thanks a lot! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c20 --- Comment #20 from Carlos Lange 2007-11-28 14:53:00 MST --- Created an attachment (id=185172) --> (https://bugzilla.novell.com/attachment.cgi?id=185172) result from setserial... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c22 --- Comment #22 from Carlos Lange 2007-11-29 01:08:21 MST --- Created an attachment (id=185208) --> (https://bugzilla.novell.com/attachment.cgi?id=185208) Xorg.0.log after tablet no longer working -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541#c24 --- Comment #24 from Carlos Lange 2007-11-29 09:24:46 MST ---

From the output of setserial I noticed that the undefined port moved from S0 to S1. I tested to see which port is receiving input with: wacdump -f tpc /dev/ttyS0 and wacdump -f tpc /dev/ttyS1 and I saw that the tablet moved to ttyS1! So I changed the port in SaX2 and it is working again now.

This guy also found intermittent behaviour in his tablet function: http://luke.no-ip.org/x60tablet/#input and he seemed to solve it with a BIOS update. Do you think it is related? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User dkukawka@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c26 Danny Kukawka changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|dkukawka@novell.com |mhopf@novell.com --- Comment #26 from Danny Kukawka 2007-12-07 11:14:46 MST --- In this case it's clearly a kernel bug I would say. The kernel should always setup the same ttyS* device after a suspend. Maybe reassign it to the kernel guys? Btw. I can't reproduce such behavior on any of our TabletPCs atm. I reassign it back to Matthias for now. @Matthias: can you confirm this is not a X, but a kernel problem and reassign if needed to the kerne ppl? THX -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User carlos.lange@ualberta.ca added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c28 --- Comment #28 from Carlos Lange 2007-12-07 11:35:29 MST --- For what it's worth, after switching back and forth between ttyS0 and ttyS1 last week (not only after suspend, but also after shutdown IIRC), I had no problems all this week. The association is stuck with ttyS0 since last weekend through many shutdowns and suspends. Nasty non-repeatable bug... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User carlos.lange@ualberta.ca added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c30 --- Comment #30 from Carlos Lange 2007-12-07 14:19:22 MST --- I would actually separate into 3 issues: 1) tablet: Danny's repo wacon and SaX2 packages work, but Eraser and Pen should be enabled by default. SOLVED 2) touchscreen (multitouch): waiting for upstream, according to Comment #12. 3) ttyS* switching associations after suspend or reboot: new issue. Should we close this bug on account of issue 1, and open new ones for 2 and 3? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User dkukawka@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c32 --- Comment #32 from Danny Kukawka 2007-12-10 04:07:35 MST --- (In reply to comment #31 from Stefan Dirsch)

You're right. We have even 3 issues. Issue 1) is not resolved as long as Danny's patches against wacom and sax2 packages are not added to our official packages.

For sax2: see fate #302889 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User sndirsch@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c34 --- Comment #34 from Stefan Dirsch 2007-12-17 12:44:40 MST --- Marcus, any chance to add Danny's wacom related patches to our official SaX2 package? AFAIK this are these - sax2-TabletPC_cdb_data_v2.diff - sax2-TabletPC_cdb_data_v3.diff - sax2-TabletPC_cdb_data_v4.diff - sax2-WacomUSBTablets_use_dev-wacom.diff See home:dkukawka/SaX2 (buildservice). Then at least issue 1) would be resolved. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User sndirsch@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c36 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |ms@novell.com --- Comment #36 from Stefan Dirsch 2007-12-18 12:44:34 MST --- Marcus? See my comment #34. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User sndirsch@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c38 --- Comment #38 from Stefan Dirsch 2007-12-19 02:37:48 MST --- Thanks a lot Marcus. I've set als FATE #302889 to DONE. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User dkukawka@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c40 Danny Kukawka changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |ms@novell.com --- Comment #40 from Danny Kukawka 2007-12-19 02:44:47 MST --- (In reply to comment #37 from Marcus Schaefer)

I have added the patches mentioned in comment 34 to the sax2 head branch

Do you see any chance to activate the Pen and the Eraser automatically if there are settings for them (StylusLink/EraserLink) in api/data/cdb/Tablets? They are always needed on Tablet PCs if there is a Link. I could not find an option as I added the Tablet PCs -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User sndirsch@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c42 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel-maintainers@forge.provo.novell.com |dkukawka@novell.com Status|NEEDINFO |NEW Info Provider|ms@novell.com | --- Comment #42 from Stefan Dirsch 2007-12-19 02:50:22 MST --- Remaining issues AFAICS: 1) Eraser and Pen should be enabled by default. 2) touchscreen (multitouch): waiting for upstream, according to Comment #12. 3) ttyS* switching associations after suspend or reboot I think we should try to resolve issue 1) first and handle issue 2) seperately. Reassigning to Danny. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |ms@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User ms@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c45 Marcus Schaefer changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|ms@novell.com | --- Comment #45 from Marcus Schaefer 2007-12-19 03:02:01 MST --- There is a profile named wacom you should find it in /usr/share/sax/profiles/ for this profile a mapping exists: /usr/share/sax/sysp/maps/Input.map 0x056a : 0x0013 : wacom I remember I had a wacom tablet with this ID's (according to hwinfo) if this tablet is present the normal mouse it gets assigned is converted into a tablet according to the mentioned profile. You can try to have the tablet activated automatically that way. Be careful with such profiles they can destroy everything in your configuration I'm sorry but I really don't have time to do any implementation in that field. You may know that sax2 will not be actively developed because I took over other tasks. We expect randr to be the base for the next generation configuration tool. Maybe it would be better to spent time in that area instead of writing sax2 profiles. Thanks -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User dkukawka@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c47 --- Comment #47 from Danny Kukawka 2007-12-19 07:59:55 MST --- There is already a wiki entry about Tablet PCs and also the handbook which clearly say that you have to activate the Pen and Eraser: http://en.opensuse.org/TabletPCs#Configuring_Your_Tablet_Device Btw. these are PNP serial devices and not USB devices. They have no vendor/product combination like USB Tablet devices -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 Carlos Lange changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|Thinkpad X60 tablet touchscreen not activated |Thinkpad X60 tablet touchscreen switching ttyS* | |association after suspend or reboot -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 Jeff Mahoney changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jeffm@novell.com AssignedTo|kernel-maintainers@forge.provo.novell.com |pavel@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 Pavel Machek changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|Normal |Minor Status|NEW |ASSIGNED -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User carlos.lange@ualberta.ca added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c51 --- Comment #51 from Carlos Lange 2008-01-04 16:32:06 MST --- Would it help if I could arrange remote access to my machine? I need it next week, but I could set it up at the University on the next Friday. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 Jiri Kosina changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User jkosina@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c54 Jiri Kosina changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED --- Comment #54 from Jiri Kosina 2008-04-10 16:45:19 MST --- Thanks a lot for the information, I am therefore closing this bug. Please if the problems starts to re-appear, feel free to reopen. Thanks! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User sndirsch@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c56 --- Comment #56 from Stefan Dirsch 2008-06-03 10:59:18 MDT --- *** Bug 396757 has been marked as a duplicate of this bug. *** https://bugzilla.novell.com/show_bug.cgi?id=396757 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User carlos.lange@ualberta.ca added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c58 Carlos Lange changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|FIXED | --- Comment #58 from Carlos Lange 2008-07-12 16:48:19 MDT --- Since approximately 3 weeks, the switching between ttyS0 and ttyS1 returned. It happens again after reboot or suspend. After switching the association, it remains on the same port for a few cycles before switching again. No clear pattern. I have applied diligently the kernel patches and currently I have: 2.6.22.18-0.2-default. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User carlos.lange@ualberta.ca added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c60 --- Comment #60 from Carlos Lange 2008-07-14 00:17:12 MDT --- I cannot install 11.0 now, but I will be able to test in 2 weeks. I will report back by then. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User carlos.lange@ualberta.ca added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c61 Carlos Lange changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |REOPENED Info Provider|carlos.lange@ualberta.ca | --- Comment #61 from Carlos Lange 2008-09-29 03:14:41 MDT --- Finally back and did some testing with 11.1b1. The boot process failed every time when I activated the tablet even when the pen and eraser were not activated. (Sax2 is very unreliable and I will report it as a separate bug, but I managed to save a version with everything activated and deleted the parts manually for testing) Through setserial I noticed that now the tablet device is associated with ttyS4. I edited xorg.conf accordingly and I can happily report that now even the touchscreen in my X60t Multitouch works well when the touch feature is activated. But unlike in 10.3, where a different ttyS* association only prevented the tablet feature from working, with 11.1b1 the whole boot process fails if I use ttyS0 in xorg.conf. So I have seen what appears to be a stable association with ttyS4 as of now. I will try to run without activating the tablet and reboot several times to see if the device remains associated with the same serial port. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User carlos.lange@ualberta.ca added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c63 --- Comment #63 from Carlos Lange 2008-09-30 10:03:58 MDT --- Well, is there any way I can help figure out the reason? In 10.3, the association continues to alternate between S0 and S1 as before. It is only with the 11.1 version (I did not try with 11.0) that ttyS4 to 9 were activated and the association changed to ttyS4 and it stays there as far as I can tell. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User carlos.lange@ualberta.ca added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c65 --- Comment #65 from Carlos Lange 2008-10-02 07:16:59 MDT --- @Pavel, I am OK with working on this for 11.1 and not for 10.3. But the issue with 11.1 is not fixed, as I merely discovered a tweak that makes it work. We still need to make SaX2 recognize automatically the correct port and use it in xorg.conf. I will open a new bug report to start it clean. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User carlos.lange@ualberta.ca added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c67 Carlos Lange changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Component|Kernel |Kernel OS/Version|openSUSE 10.3 |openSUSE 11.0 Product|openSUSE 10.3 |openSUSE 11.1 Resolution|FIXED | Version|Beta 3 |Beta 1 --- Comment #67 from Carlos Lange 2008-10-02 08:16:19 MDT --- OK, Danny. As I said, every time the boot process does not crash, I had it associated with ttyS4. Here are the outputs of setserial -g /dev/ttyS* for 10.3 (associated with ttyS1) and 11.1 (with Touch enabled) compared. 10.3: /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: undefined, Port: 0x0200, IRQ: 5 /dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4 /dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3 /dev/ttyS4: No such device or address /dev/ttyS5: No such device or address /dev/ttyS6: No such device or address /dev/ttyS7: No such device or address 11.1: /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3 /dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4 /dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3 /dev/ttyS4, UART: undefined, Port: 0x0200, IRQ: 5 /dev/ttyS5, UART: unknown, Port: 0x0000, IRQ: 0 /dev/ttyS6, UART: unknown, Port: 0x0000, IRQ: 0 /dev/ttyS7, UART: unknown, Port: 0x0000, IRQ: 0 Assuming this new behaviour stays like this, is it possible for SaX2 to use the output of setserial and write an xorg.conf with the correct port? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=323541 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=323541#c69 Pavel Machek changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution| |FIXED --- Comment #69 from Pavel Machek 2008-10-03 01:33:22 MDT --- #66: in 11.1, kernel is assigning ttyS4 all the time. Given that serial port numbers are basically random (they will change with enabling/disabling of IR port in BIOS, for example), that's correct behaviour. (It was buggy in other kernels). So this one is fixed for 11.1. Now, maybe wiring digitizer to serial port was a very stupid idea, and yes it makes life hard for SaX. But I still see no kernel problem here. Given number of comments and resulting confusion, please open a new bug for SaX. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.