http://bugzilla.suse.com/show_bug.cgi?id=1031401 Bug ID: 1031401 Summary: Wicked refuses to bind ipv6 address address in netlink Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: wicked-maintainers@suse.de Reporter: tchvatal@suse.com QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- Created attachment 719070 --> http://bugzilla.suse.com/attachment.cgi?id=719070&action=edit wicked.log After update to 42.2 containers in openvz fail out binding ipv6 address to the interface. The log as follows (full one attached): bře 28 19:17:22 leap42 wickedd[117]: venet0: adjusting mtu for ipv6:static lease in state applying: success [after 0m0.0s] bře 28 19:17:22 leap42 wickedd[117]: Adding new interface address 2a03:3b40:3::6/128 bře 28 19:17:22 leap42 wickedd[117]: __ni_rtnl_send_newaddr(2a03:3b40:3::6/128) bře 28 19:17:22 leap42 wickedd[117]: netlink reports error -22 bře 28 19:17:22 leap42 wickedd[117]: __ni_nl_talk: recv failed: Invalid input data or parameter bře 28 19:17:22 leap42 wickedd[117]: __ni_rtnl_send_newaddr(2a03:3b40:3::6/128): ni_nl_talk failed [Invalid input data or parameter] bře 28 19:17:22 leap42 wickedd[117]: venet0: applying addresses for ipv6:static lease in state applying: failure [after 0m0.0s] bře 28 19:17:22 leap42 wickedd[117]: venet0: updater for lease ipv6:static in state applying finished: failure [0m0.93s] I am not entirely sure this why this is happening esp. since the wicked and libnl3 versions are the same between 42.1 and 42.2. FWIW 'ip addr' adding works just fine with the same IP/subnet. I will try to verify on Tumbleweed next to see if there it is broken too. -- You are receiving this mail because: You are on the CC list for the bug.