https://bugzilla.novell.com/show_bug.cgi?id=661738
https://bugzilla.novell.com/show_bug.cgi?id=661738#c5
Terje J. Hanssen changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
InfoProvider|terje@nordland-teknikk.no |
--- Comment #5 from Terje J. Hanssen 2011-01-09 23:50:09 UTC ---
gsmartcontrol-0.8.5-18.1.x86_64
--------------------------------
First I tried '/usr/bin/gsmartcontrol-root', but got an error message
There was an error while executing smartctl
Smartctl returned invalid output
Please specify the correct smartctl binary in Preferences.
However this looked to contain the correct
/usr/sbin/smartctl
smartmontools-5.40-5.1.x86_64
------------------------------
# smartctl -H /dev/sda
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
# smartctl -l error /dev/sda
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 9 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 9 occurred at disk power-on lifetime: 1435 hours (59 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 5b 42 54 6a e2 Error: IDNF 91 sectors at LBA = 0x026a5442 = 40522818
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
35 00 60 3d 53 6a e0 08 00:46:20.600 WRITE DMA EXT
ca 00 08 8d 14 41 e0 08 00:46:19.400 WRITE DMA
ca 00 30 5d 14 41 e0 08 00:46:18.500 WRITE DMA
35 00 e0 5d 4f 6a e0 08 00:46:15.100 WRITE DMA EXT
ca 00 08 55 14 41 e0 08 00:46:15.100 WRITE DMA
Error 8 occurred at disk power-on lifetime: 1435 hours (59 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 08 bd 3a 68 e2 Error: IDNF at LBA = 0x02683abd = 40385213
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 bd 3a 68 e2 08 00:45:04.900 WRITE DMA
ec 00 00 00 00 00 a0 08 00:45:04.900 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 00:45:04.900 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 00:45:04.900 IDENTIFY DEVICE
ca 00 08 cd 39 68 e2 08 00:44:56.800 WRITE DMA
Error 7 occurred at disk power-on lifetime: 1435 hours (59 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 08 cd 39 68 e2 Error: IDNF at LBA = 0x026839cd = 40384973
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 cd 39 68 e2 08 00:44:56.800 WRITE DMA
ec 00 00 00 00 00 a0 08 00:44:56.800 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 00:44:56.800 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 00:44:56.800 IDENTIFY DEVICE
ca 00 08 ed 49 b4 e1 08 00:44:52.100 WRITE DMA
Error 6 occurred at disk power-on lifetime: 1435 hours (59 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 08 ed 49 b4 e1 Error: IDNF at LBA = 0x01b449ed = 28592621
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 ed 49 b4 e1 08 00:44:52.100 WRITE DMA
ec 00 00 00 00 00 a0 08 00:44:52.100 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 00:44:52.100 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 00:44:52.100 IDENTIFY DEVICE
ca 00 08 ed 3a 68 e1 08 00:44:45.700 WRITE DMA
Error 5 occurred at disk power-on lifetime: 1435 hours (59 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 08 ed 3a 68 e1 Error: IDNF at LBA = 0x01683aed = 23608045
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 ed 3a 68 e1 08 00:44:45.700 WRITE DMA
ca 00 10 35 3a 68 e1 08 00:44:45.700 WRITE DMA
ca 00 08 4d d0 67 e1 08 00:44:45.600 WRITE DMA
ca 00 08 05 3b 67 e1 08 00:44:45.600 WRITE DMA
ca 00 08 e5 bd 65 e1 08 00:44:45.600 WRITE DMA
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.