https://bugzilla.novell.com/show_bug.cgi?id=224528 Summary: SuSE102.RC1: Resolution 1680x1050 24 not correctly set with 945M video on laptop Dell D820 Product: openSUSE 10.2 Version: RC 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch@novell.com ReportedBy: Wojciech.Szenajch@bull.com.pl QAContact: sndirsch@novell.com This hardware worked without any problems using 1680x1050 resolution with SuSE 10.1. In SuSE 10.2RC1 x86_64 sax2 discovers configuration correctly as reported by some lines of hwinfo --monitor: 31: None 00.0: 10002 LCD Monitor [Created at monitor.93] Unique ID: rdCR.TXuwCXVLBM9 Hardware Class: monitor Model: "DD284 154W02 LCD Monitor" Vendor: LPL "DD284 154W02" Device: eisa 0x0000 Resolution: 1680x1050@60Hz Size: 331x207 mm Detailed Timings: Resolution: 1680x1050 Horizontal: 1680 1728 1760 1840 (+48 +80 +160) -hsync Vertical: 1050 1052 1074 1080 (+2 +24 +30) -vsync Frequencies: 119.23 MHz, 64.80 kHz, 60.00 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown 32: None 00.2: 10002 LCD Monitor [Created at monitor.93] Unique ID: aHB6.TXuwCXVLBM9 Hardware Class: monitor Model: "DD284 154W02 LCD Monitor" Vendor: LPL "DD284 154W02" Device: eisa 0x0000 Resolution: 1680x1050@60Hz Size: 331x207 mm Detailed Timings: Resolution: 1680x1050 Horizontal: 1680 1728 1760 1840 (+48 +80 +160) -hsync Vertical: 1050 1052 1074 1080 (+2 +24 +30) -vsync Frequencies: 119.23 MHz, 64.80 kHz, 60.00 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown but finally set resolution is reported as 1280x1024 in sax2 test mode. According to similar Bug 223745 I set the following line: VIDEOBIOS_PARAMETERS="30 1680 1050 24" in /etc/sysconfig/videobios file. After reboot I got native 1680x1050 display resolution. Some reports (VIDEOBIOS_PARAMETERS is set as described): # sysp -q xstuff Card0 => DDC : LPL0000 Card0 => DDC[2] : LPL0000 Card0 => Name : DD284 154W02 LCD Monitor Card0 => Vendor : LPL Card0 => Name[2] : DD284 154W02 LCD Monitor Card0 => Vendor[2] : LPL Card0 => Primary : 00-02-0 Card0 => Chipset : <undefined> Card0 => Vsync : 60 Card0 => Hsync : 82 Card0 => Vsync[2] : 60 Card0 => Hsync[2] : 82 Card0 => Vesa : 1680 1050 82 60 Card0 => Vesa[2] : 1680 1050 82 60 Card0 => Dacspeed : 220 Card0 => Dacspeed[2]: 220 Card0 => Modeline : <undefined> Card0 => Modeline[2]: <undefined> Card0 => Memory : 7932 Card0 => Current : 00-02-0 Card0 => RawDef : None Card0 => Option : None Card0 => Extension : None Card0 => Module : i810 Card0 => Display : LCD/TFT Card0 => Display[2] : LCD/TFT Card0 => Size : 331x207 Card0 => Size[2] : 331x207 Card0 => VesaBios : 3.0 # sysp -q server Card0 => DomainId : 0x0 Card0 => BusId : 0x0 Card0 => SlotId : 0x02 Card0 => FuncId : 0x0 Card0 => Vendor : Intel Card0 => Device : 945 GM Card0 => VID : 0x8086 Card0 => DID : 0x27a2 Card0 => Module : i810 Card0 => BusType : PCI Card0 => Detected : 1 Card0 => Flag : DEFAULT Card0 => SUB-VID : 0x1028 Card0 => SUB-DID : 0x01cc Card0 => DrvProfile : Depth24,NoDDC I hope it will be useful for adding this device to the map of patched devices. Additionally update of the line: "# read the documentation in /usr/share/doc/packages/855resolution." to 915resolution in /etc/sysconfig/videobios file is also welcome. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.