https://bugzilla.novell.com/show_bug.cgi?id=275316#c7
William Shackleford changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
Info Provider|wshackle@yahoo.com |
--- Comment #7 from William Shackleford 2007-06-20 11:10:45 MST ---
Includes the lsmod and dmesg output:
[shackle@galactica-304 laneMaster]$ dmesg
Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com)
(gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT
2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f000 end:
000000000009f000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f000 size: 0000000000001000 end:
00000000000a0000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000007fd91400 end:
000000007fe91400 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007fe91400 size: 000000000016ec00 end:
0000000080000000 type: 2
copy_e820_map() start: 00000000e0000000 size: 0000000010007000 end:
00000000f0007000 type: 2
copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end:
00000000f000c000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end:
00000000fec10000 type: 2
copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end:
00000000feda0000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end:
00000000fee10000 type: 2
copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end:
0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe91400 (usable)
BIOS-e820: 000000007fe91400 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 523921) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 523921
early_node_map[1] active PFN ranges
0: 0 -> 523921
On node 0 totalpages: 523921
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292244 pages, LIFO batch:31
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP 000FC370, 0014 (r0 DELL )
ACPI: RSDT 7FE91A11, 0038 (r1 DELL M07 27D6040B ASL 61)
ACPI: FACP 7FE92800, 0074 (r1 DELL M07 27D6040B ASL 61)
ACPI: DSDT 7FE93400, 418B (r1 INT430 SYSFexxx 1001 INTL 20050624)
ACPI: FACS 7FEA1C00, 0040
ACPI: APIC 7FE93000, 0068 (r1 DELL M07 27D6040B ASL 47)
ACPI: ASF! 7FE92C00, 005B (r16 DELL M07 27D6040B ASL 61)
ACPI: MCFG 7FE92FC0, 003E (r16 DELL M07 27D6040B ASL 61)
ACPI: SSDT 7FE91A8C, 04DC (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists. Total pages: 519828
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c077c000 soft=c075c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2161.344 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2069432k/2095684k available (2066k kernel code, 25020k reserved, 1092k
data, 240k init, 1178180k highmem)
virtual kernel memory layout:
fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc071b000 - 0xc0757000 ( 240 kB)
.data : 0xc0604a4a - 0xc0715cb4 (1092 kB)
.text : 0xc0400000 - 0xc0604a4a (2066 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4324.57 BogoMIPS (lpj=2162287)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9
00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c077d000 soft=c075d000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4321.90 BogoMIPS (lpj=2160952)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9
00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08
Total of 2 processors activated (8646.47 BogoMIPS).
ENABLING IO-APIC IRQs
.TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 4448584699 cycles TSC warp between CPUs, turning off TSC clock.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1376 bytes
migration_cost=1000
Time: 10:04:26 Date: 05/15/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfaf76, last bus=12
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1080-10bf claimed by ICH6 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try
'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
pnp: 00:02: ioport range 0x1008-0x100f has been reserved
pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
pnp: 00:03: ioport range 0x1060-0x107f has been reserved
pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
pnp: 00:08: ioport range 0x910-0x91f has been reserved
pnp: 00:08: ioport range 0x920-0x92f has been reserved
pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved
pnp: 00:08: ioport range 0x940-0x97f has been reserved
pnp: 00:0c: ioport range 0xcb0-0xcbb has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dd000000-dfefffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: dcf00000-dcffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: dce00000-dcefffff
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:01.0
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: 88000000-8bffffff
MEM window: 8c000000-8fffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: 8c000000-91ffffff
PREFETCH window: 88000000-8bffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3474k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1181901865.544:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 65F8109C338BBD41
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: SSDT 7FE921B3, 01F1 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 7FE91F68, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FE923A4, 0090 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 7FE9212E, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (65 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c2]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x04b8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0x8c000000 - 0x91ffffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 11:697:72
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 820k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
input: PS/2 Mouse as /class/input/input2
input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 1-2: device descriptor read/all, error -71
SCSI subsystem initialized
libata version 2.20 loaded.
ata_piix 0000:00:1f.2: version 2.10ac1
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
scsi0 : ata_piix
ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
ata1.00: ATA-7: Hitachi HTS721010G9SA00, MCZOC10H, max UDMA/100
ata1.00: 195371568 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
ata1.00: configured for UDMA/100
scsi1 : ata_piix
ata2.00: ATAPI, max UDMA/33
usb 1-2: new full speed USB device using uhci_hcd and address 4
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72101 MCZO PQ: 0 ANSI: 5
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
scsi 1:0:0:0: CD-ROM SONY DVD+-RW DW-Q58A UDS2 PQ: 0 ANSI: 5
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.3: new full speed USB device using uhci_hcd and address 5
usb 1-2.3: configuration #1 chosen from 1 choice
hub 1-2.3:1.0: USB hub found
hub 1-2.3:1.0: 3 ports detected
usb 1-2.3.2: new full speed USB device using uhci_hcd and address 6
usb 1-2.3.2: configuration #1 chosen from 1 choice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@redhat.com
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: dm-0: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 3901680
ext3_orphan_cleanup: deleting unreferenced inode 459327
ext3_orphan_cleanup: deleting unreferenced inode 3905051
ext3_orphan_cleanup: deleting unreferenced inode 3923261
ext3_orphan_cleanup: deleting unreferenced inode 3904943
ext3_orphan_cleanup: deleting unreferenced inode 3902527
ext3_orphan_cleanup: deleting unreferenced inode 3901165
ext3_orphan_cleanup: deleting unreferenced inode 3908357
ext3_orphan_cleanup: deleting unreferenced inode 3901273
ext3_orphan_cleanup: deleting unreferenced inode 3902259
ext3_orphan_cleanup: deleting unreferenced inode 3902853
ext3_orphan_cleanup: deleting unreferenced inode 3901855
ext3_orphan_cleanup: deleting unreferenced inode 3902187
ext3_orphan_cleanup: deleting unreferenced inode 3909949
ext3_orphan_cleanup: deleting unreferenced inode 3902164
ext3_orphan_cleanup: deleting unreferenced inode 3901226
ext3_orphan_cleanup: deleting unreferenced inode 3918269
ext3_orphan_cleanup: deleting unreferenced inode 3900615
ext3_orphan_cleanup: deleting unreferenced inode 459324
ext3_orphan_cleanup: deleting unreferenced inode 3908702
ext3_orphan_cleanup: deleting unreferenced inode 3913339
ext3_orphan_cleanup: deleting unreferenced inode 3901885
ext3_orphan_cleanup: deleting unreferenced inode 17268747
ext3_orphan_cleanup: deleting unreferenced inode 3915971
ext3_orphan_cleanup: deleting unreferenced inode 3901207
ext3_orphan_cleanup: deleting unreferenced inode 66460
ext3_orphan_cleanup: deleting unreferenced inode 3902111
ext3_orphan_cleanup: deleting unreferenced inode 3901721
ext3_orphan_cleanup: deleting unreferenced inode 3913280
ext3_orphan_cleanup: deleting unreferenced inode 3900930
ext3_orphan_cleanup: deleting unreferenced inode 3901722
ext3_orphan_cleanup: deleting unreferenced inode 3901720
ext3_orphan_cleanup: deleting unreferenced inode 3901623
ext3_orphan_cleanup: deleting unreferenced inode 3901566
ext3_orphan_cleanup: deleting unreferenced inode 3902174
ext3_orphan_cleanup: deleting unreferenced inode 459326
ext3_orphan_cleanup: deleting unreferenced inode 3908434
ext3_orphan_cleanup: deleting unreferenced inode 3912429
ext3_orphan_cleanup: deleting unreferenced inode 3912174
ext3_orphan_cleanup: deleting unreferenced inode 3900768
ext3_orphan_cleanup: deleting unreferenced inode 3910851
ext3_orphan_cleanup: deleting unreferenced inode 3900737
ext3_orphan_cleanup: deleting unreferenced inode 3910845
ext3_orphan_cleanup: deleting unreferenced inode 3902258
ext3_orphan_cleanup: deleting unreferenced inode 3908419
ext3_orphan_cleanup: deleting unreferenced inode 3904386
ext3_orphan_cleanup: deleting unreferenced inode 655419
ext3_orphan_cleanup: deleting unreferenced inode 3912670
ext3_orphan_cleanup: deleting unreferenced inode 3902079
ext3_orphan_cleanup: deleting unreferenced inode 393585
ext3_orphan_cleanup: deleting unreferenced inode 3903879
ext3_orphan_cleanup: deleting unreferenced inode 3903660
ext3_orphan_cleanup: deleting unreferenced inode 3903523
ext3_orphan_cleanup: deleting unreferenced inode 3903285
ext3_orphan_cleanup: deleting unreferenced inode 3903232
ext3_orphan_cleanup: deleting unreferenced inode 3903184
ext3_orphan_cleanup: deleting unreferenced inode 3902981
ext3_orphan_cleanup: deleting unreferenced inode 3900861
ext3_orphan_cleanup: deleting unreferenced inode 3900860
ext3_orphan_cleanup: deleting unreferenced inode 3901292
ext3_orphan_cleanup: deleting unreferenced inode 3904223
ext3_orphan_cleanup: deleting unreferenced inode 3901556
ext3_orphan_cleanup: deleting unreferenced inode 3902869
ext3_orphan_cleanup: deleting unreferenced inode 3901386
ext3_orphan_cleanup: deleting unreferenced inode 3901398
ext3_orphan_cleanup: deleting unreferenced inode 4063655
EXT3-fs: dm-0: 66 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1181901901.039:2): selinux=0 auid=4294967295
input: PC Speaker as /class/input/input4
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
intel_rng: FWH not detected
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: excluding 0xc80-0xc87 0xc90-0xc97
cs: IO port probe 0xa00-0xaff: clean.
iTCO_vendor_support: vendor-support=0
Floppy drive(s): fd0 is 1.44M
tg3.c:v3.75.1 (May 7, 2007)
ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:09:00.0 to 64
eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express)
10/100/1000Base-T Ethernet 00:15:c5:44:3d:5b
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux,
0.0.21kd
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:0c:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
nvidia: module license 'NVIDIA' taints kernel.
iwl3945: iwlwifi-3945.ucode firmware file req failed: Reason -2
iwl3945: Could not read microcode: -2
ACPI: PCI interrupt for device 0000:0c:00.0 disabled
iwl3945: probe of 0000:0c:00.0 failed with error -2
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.09 Sat May 26 00:47:07 PDT
2007
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux,
1.2.1dm
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:0c:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
floppy0: no floppy controllers found
loop: loaded (max 8 devices)
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
lp: driver loaded but no devices found
sonypi: Sony Programmable I/O Controller Driver v1.26.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
BUG: warning at kernel/softirq.c:138/local_bh_enable() (Tainted: P )
[<c042b0cf>] local_bh_enable+0x45/0x92
[<c06002bd>] cond_resched_softirq+0x2c/0x42
[<c059adf3>] release_sock+0x4f/0x9d
[<c05c670d>] tcp_sendmsg+0x90b/0x9f9
[<c04e7350>] copy_to_user+0x3c/0x50
[<c059f285>] memcpy_toiovec+0x27/0x4a
[<c059ddb8>] __kfree_skb+0xb5/0x113
[<c06016f4>] _spin_lock_bh+0x8/0x18
[<c05dec95>] inet_sendmsg+0x3b/0x45
[<c0598731>] sock_aio_write+0xf6/0x102
[<c04753ea>] do_sync_readv_writev+0xc1/0xfe
[<c0436e71>] autoremove_wake_function+0x0/0x35
[<c04e7100>] copy_from_user+0x3a/0x66
[<c04752a5>] rw_copy_check_uvector+0x5c/0xb0
[<c0475b33>] do_readv_writev+0xbc/0x187
[<c059863b>] sock_aio_write+0x0/0x102
[<c059a7dc>] sock_common_setsockopt+0x1d/0x22
[<c0475c3b>] vfs_writev+0x3d/0x48
[<c04760a4>] sys_writev+0x41/0x95
[<c0404f70>] syscall_call+0x7/0xb
=======================
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: ACPI Dock Station Driver
ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler
ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /class/input/input7
ACPI: Sleep Button (CM) [SBTN]
ibm_acpi: ec object not found
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
across:2031608k
ADDRCONF(NETDEV_UP): eth0: link is not ready
ipw3945: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
sr0: CDROM not ready. Make sure there is a disc in the drive.
Clocksource tsc unstable (delta = -65530780 ns)
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
usb 5-7: new high speed USB device using ehci_hcd and address 3
usb 5-7: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access LaCie BiggerDisk PQ: 0 ANSI: 4
SCSI device sdb: 1953588224 512-byte hdwr sectors (1000237 MB)
sdb: Write Protect is off
sdb: Mode Sense: 10 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 1953588224 512-byte hdwr sectors (1000237 MB)
sdb: Write Protect is off
sdb: Mode Sense: 10 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: Attached scsi disk sdb
sd 2:0:0:0: Attached scsi generic sg2 type 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
sr0: CDROM not ready. Make sure there is a disc in the drive.
fuse init (API version 7.8)
ISO 9660 Extensions: RRIP_1991A
[shackle@galactica-304 laneMaster]$ lsmod
bash: lsmod: command not found
[shackle@galactica-304 laneMaster]$ sudo /sbin/lsmod
Module Size Used by
fuse 45909 0
ext2 66377 0
usb_storage 66049 0
sit 14757 0
tunnel4 7753 1 sit
sunrpc 159133 1
cpufreq_ondemand 11981 2
acpi_cpufreq 14281 0
video 21065 0
sbs 19173 0
i2c_ec 9281 1 sbs
button 12113 0
bay 10177 0
dock 13669 1 bay
battery 14149 0
ac 9413 0
ipv6 276673 33 sit
parport_pc 29797 0
lp 15977 0
parport 38025 2 parport_pc,lp
loop 19785 0
snd_hda_intel 24281 2
snd_hda_codec 202689 1 snd_hda_intel
snd_seq_dummy 7877 0
snd_seq_oss 33345 0
ipw3945 188704 1
snd_seq_midi_event 11073 1 snd_seq_oss
snd_seq 50353 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
ieee80211 35081 1 ipw3945
ieee80211_crypt 10049 1 ieee80211
snd_seq_device 11852 3 snd_seq_dummy,snd_seq_oss,snd_seq
nvidia 7250420 20
i2c_i801 12241 0
snd_pcm_oss 43489 0
snd_mixer_oss 19393 2 snd_pcm_oss
iwl3945 141477 0
mac80211 136005 1 iwl3945
iTCO_wdt 14693 0
snd_pcm 74565 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
tg3 104517 0
snd_timer 24773 2 snd_seq,snd_pcm
snd 53189 11
snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
serio_raw 10821 0
cfg80211 12105 1 mac80211
i2c_core 24641 3 i2c_ec,nvidia,i2c_i801
iTCO_vendor_support 7877 1 iTCO_wdt
soundcore 11553 2 snd
snd_page_alloc 13769 2 snd_hda_intel,snd_pcm
joydev 13441 0
sr_mod 20197 0
cdrom 37217 1 sr_mod
sg 37213 0
pcspkr 7105 0
dm_snapshot 20709 0
dm_zero 6209 0
dm_mirror 24277 0
dm_mod 57229 8 dm_snapshot,dm_zero,dm_mirror
ata_generic 12101 0
ata_piix 18757 2
libata 115417 2 ata_generic,ata_piix
sd_mod 23873 3
scsi_mod 137549 5 usb_storage,sr_mod,sg,libata,sd_mod
ext3 125385 2
jbd 59881 1 ext3
mbcache 12357 2 ext2,ext3
ehci_hcd 35405 0
ohci_hcd 23749 0
uhci_hcd 26833 0
[shackle@galactica-304 laneMaster]$
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.