https://bugzilla.novell.com/show_bug.cgi?id=391866 User captain.magnus@opensuse.org added comment https://bugzilla.novell.com/show_bug.cgi?id=391866#c1 --- Comment #1 from Magnus Boman 2008-05-18 16:00:22 MST --- Created an attachment (id=216262) --> (https://bugzilla.novell.com/attachment.cgi?id=216262) Screnshot2 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=391866 User captain.magnus@opensuse.org added comment https://bugzilla.novell.com/show_bug.cgi?id=391866#c3 Magnus Boman changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|captain.magnus@opensuse.org | --- Comment #3 from Magnus Boman 2008-05-19 02:07:55 MST --- It, and it says that the mount point is /read-write which doesn't exist. If I create /read-write it works fine. udi = '/org/freedesktop/Hal/devices/storage_serial_USB_Flash_Disk_AA04012700007435_0_0' block.device = '/dev/sdb' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 16 (0x10) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_USB_Flash_Disk_AA04012700007435_0_0' (string) info.addons = {'hald-addon-storage'} (string list) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_90c_1000_AA04012700007435_if0_scsi_host_scsi_device_lun0' (string) info.product = 'Flash Disk' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_USB_Flash_Disk_AA04012700007435_0_0' (string) info.vendor = 'USB' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host2/target2:0:0/2:0:0:0/block/sdb' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '1100' (string) storage.hotpluggable = true (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'Flash Disk' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_90c_1000_AA04012700007435_if0' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = true (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 8119648256 (0x1e3f80000) (uint64) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.serial = 'USB_Flash_Disk_AA04012700007435-0:0' (string) storage.size = 0 (0x0) (uint64) storage.vendor = 'USB' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_2e70da7d_55d8_40b4_82ce_a01747b402af' block.device = '/dev/sdb3' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 19 (0x13) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_USB_Flash_Disk_AA04012700007435_0_0' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_USB_Flash_Disk_AA04012700007435_0_0' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_2e70da7d_55d8_40b4_82ce_a01747b402af' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host2/target2:0:0/2:0:0:0/block/sdb/sdb3' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 658665 (0xa0ce9) (int) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 8119648256 (0x1e3f80000) (uint64) volume.partition.number = 3 (0x3) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 7781114880 (0x1cfca6400) (uint64) volume.partition.type = '0x82' (string) volume.partition.uuid = '' (string) volume.size = 337236480 (0x1419d200) (uint64) volume.uuid = '2e70da7d-55d8-40b4-82ce-a01747b402af' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_088d28fd_4539_44d5_ba80_9659ca8bd44d' block.device = '/dev/sdb2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 18 (0x12) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_USB_Flash_Disk_AA04012700007435_0_0' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_USB_Flash_Disk_AA04012700007435_0_0' (string) info.product = 'Volume (ext2)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_088d28fd_4539_44d5_ba80_9659ca8bd44d' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host2/target2:0:0/2:0:0:0/block/sdb/sdb2' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext2' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr'} (string list) volume.mount_point = '/read-write' (string) volume.num_blocks = 13880160 (0xd3cb60) (int) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 8119648256 (0x1e3f80000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 674472960 (0x2833a400) (uint64) volume.partition.type = '0x83' (string) volume.partition.uuid = '' (string) volume.size = 7106641920 (0x1a796c000) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '088d28fd-4539-44d5-ba80-9659ca8bd44d' (string) udi = '/org/freedesktop/Hal/devices/volume_part1_size_674440704' block.device = '/dev/sdb1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 17 (0x11) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_USB_Flash_Disk_AA04012700007435_0_0' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_USB_Flash_Disk_AA04012700007435_0_0' (string) info.product = 'Volume (squashfs)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_674440704' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/host2/target2:0:0/2:0:0:0/block/sdb/sdb1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'squashfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '3.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = true (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list) volume.mount_point = '/read-only' (string) volume.num_blocks = 1317267 (0x141993) (int) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 8119648256 (0x1e3f80000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 32256 (0x7e00) (uint64) volume.partition.type = '0x83' (string) volume.partition.uuid = '' (string) volume.size = 674440704 (0x28332600) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '' (string) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=391866 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=391866#c5 Kay Sievers changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |kasievers@novell.com --- Comment #5 from Kay Sievers 2008-05-20 00:52:34 MST --- Sorry, what's the exact question here? What "set's the mountpoint"? We do not support anything else than directories below /media, if that may be the reason? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=391866 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=391866#c7 Kay Sievers changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|kasievers@novell.com | --- Comment #7 from Kay Sievers 2008-05-20 05:20:17 MST --- Right, HAL refuses to handle anything outside of /media/*. ("System volumes" must be handled by fstab, which will instruct HAL to ignore them. But for fstab listed volumes, there is currently no automounting support.) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=391866 User coolo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=391866#c9 --- Comment #9 from Stephan Kulow 2008-05-21 13:38:21 MST --- *** Bug 391867 has been marked as a duplicate of this bug. *** https://bugzilla.novell.com/show_bug.cgi?id=391867 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=391866 User coolo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=391866#c11 Stephan Kulow changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team-screening@forge.provo.novell.com |coolo@novell.com Status|NEW |ASSIGNED --- Comment #11 from Stephan Kulow 2008-05-22 03:01:04 MST --- Marcus, can we have a specific label in the partition? I still copy oem to myoem, so I can change the repartition code. But can I also influence the volume.label of sda1 ? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=391866 User ms@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=391866#c12 Marcus Schaefer changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|ms@novell.com | --- Comment #12 from Marcus Schaefer 2008-05-22 13:34:10 MST --- I think you can set a label with fdisk on a partition and use this label to ignore the partition <match key="volume.label" string="BOB"> <merge key="volume.ignore" type="bool">true</merge> </match> I must admit I never set a label on partitions and the oem repartition code doesn't take care for it -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=391866 User coolo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=391866#c14 Stephan Kulow changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED --- Comment #14 from Stephan Kulow 2008-06-07 14:20:12 MDT --- This should help: <?xml version="1.0" encoding="UTF-8"?> <deviceinfo version="0.2"> <device> <match key="volume.mount_point" string="/read-write"> <merge key="volume.ignore" type="bool">true</merge> </match> </device> <device> <match key="volume.mount_point" string="/read-only"> <merge key="volume.ignore" type="bool">true</merge> </match> </device> </deviceinfo> -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.